| Age | Commit message (Collapse) | Author |
|---|
|
Update the documentation to expicitly support the Meson-AXG SoC.
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Extract and promote common adc platform data into a new structure,
to make it better share the info between several SoCs,
this will avoid duplicating the code all over the place,
Save a few memory and make the code more maintainable.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The events IIO_EV_INFO_VALUE and IIO_EV_INFO_ENABLE currently have a
falling and rising direction configured. There does not need to be a
separate distinction so this patch changes these to use the
either direction. Directory listing of event sysfs attributes for a
TSL2772 with this patch applied:
in_intensity0_thresh_either_en
in_intensity0_thresh_either_period
in_intensity0_thresh_falling_value
in_intensity0_thresh_rising_value
in_proximity0_thresh_either_en
in_proximity0_thresh_either_period
in_proximity0_thresh_falling_value
in_proximity0_thresh_rising_value
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The hardware supports 16-bit ALS and proximity readings, however the
datasheet recommends using the I2C auto increment protocol so that the
correct high and low bytes are read even if the integration cycle ends
between reading the lower and upper registers.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move adis16201 driver out of staging and merge into mainline
IIO subsystem.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Split the line over 80 characters limit to fix checkpatch
warning.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use GENMASK to improve readability and remove the local variables used to
store intermediate data.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Remove few unused headers files since the adis core handles the buffer and
sysfs support.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add Brian Masney's copyright and to the list of module authors for all
of the staging cleanups. This patch also update's Jon Brenner's current
work email address since AMS now owns TAOS.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This patch ensures that all of the local variable declarations are in
reverse Christmas tree order where possible to increase code
readability.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Remove the ch0 and ch1 variables from tsl2x7x_get_lux() and
write those values directly into the chip->als_cur_info.als_ch0
and chip->als_cur_info.als_ch01 variables.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
tsl2x7x_get_lux() has a ch0lux and ch1lux variables that are not used
so this patch removes them.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The struct tsl2x7x_settings contained a persistence member that
contained both the ALS and proximity persistence fields. This patch
splits this out into two separate fields so that the bitmasks in
several parts of the code are no longer necessary.
The default persistence settings are also changed by this patch from:
- Proximity: 0 (Every proximity cycle generates an interrupt)
- ALS: 255 (60 consecutive values out of range)
to something a little more reasonable based on my testing:
- Proximity: 1 (1 proximity value out of range)
- ALS: 1 (1 value outside of threshold range)
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This patch updates all of the logging commands so that they are
consistent with the other messages, includes __func__ in the message,
and all of the messages include newlines. This patch also removes some
debug log messages.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The struct tsl2x7x_settings contained an interrupts_en member that was
a bitmask for which interrupts are enabled. This required having
bitmasks in several parts of the code. This patch splits this field
out into two booleans to remove most of the bitmasks in the code.
This patch also fixes a bug where if an interrupt pin was configured,
but proximity interrupts were disabled, then the proximity value could
not be polled.
This patch also removes an unnecessary second call to writing the
control register in tsl2x7x_chip_on().
Driver tested using a TSL2772 hooked up to a Raspberry Pi 2.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
tsl2x7x_prox_cal() would set the interrupt flag, and reset the device to
start doing the calibration routine. However, this did not actually
affect the readings since they are polled. This patch drops the interrupt
code.
This patch also drops the function tsl2x7x_prox_calculate() and removes
support for the standard deviation and min sample since those values
were not used.
Driver was tested using a TSL2772 hooked up to a Raspberry Pi 2. I
performed the following testing at various distances:
- Put hand in front of sensor and keep the sensor and hand stationary.
- Perform calibration routine.
- Run iio_event_monitor.
- Verify that a proximity event is triggered when my hand comes
anywhere between the sensor and where I performed the calibration
routine.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
tsl2x7x_get_lux() does not need to clear the interrupt flag when
querying the ALS. The interrupt flag is cleared in
tsl2x7x_event_handler(). This patches removes the unnecessary code.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
tsl2x7x_event_handler() was not called as expected when the device was
asserting a hardware interrupt. This patch changes the interrupt line
trigger from rising to falling.
The driver was tested on a TSL2772 hooked up to a Raspberry Pi 2. The
interrupt pin also had a 10K pull-up resistor per the requirements from
the datasheet. The relevant device tree binding:
&i2c1 {
tsl2772@39 {
compatible = "amstaos,tsl2772";
reg = <0x39>;
interrupt-parent = <&gpio>;
interrupts = <22 0x2>;
};
};
With this patch, iio_event_monitor now shows the events when the
channels are outside the defined interrupt thresholds.
$ sudo ./iio_event_monitor tsl2772
Found IIO device with name tsl2772 with device number 0
Event: time: 1478193460053760446, type: proximity, channel: 0, evtype:
thresh, direction: either
...
Event: time: 1478193463020270185, type: illuminance, channel: 0, evtype:
thresh, direction: either
...
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
As a follow up to the work in commit a0722d05a195 ("staging: iio:
tsl2x7x: convert mutex_trylock() to mutex_lock()"), this patch removes
the unnecessary calls to tsl2x7x_get_prox() and tsl2x7x_get_lux() in
tsl2x7x_event_handler(). Previously, these functions were locked with
mutex_trylock(), but that is no longer the case. This patch also removes
a comment that is no longer relevant about returning the last sample.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The original code had a read function per data size; after updates, all
read functions tasks were centralized in a single function, but the old
signature was kept to maintain the module working without problems. This
patch removes a set of duplications associated with read_reg_*, and
update the areas that calling the old interface by the new one.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Rework read SPI function to reduce the code duplication and centralizes
all the task in a single function.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The read operation for the I2C function has many duplications that can
be generalized into a single function. This patch reworks the read
operation for I2C to centralizes all similar code in a single function.
It is possible to remove all the old interface to use the new one,
however, for keeping the things simple and working this patch maintain
legacy interface.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This patch removes code duplications related to the write_reg_*
functions and centralizes them in a single function. Also, it eliminates
the legacy functions and replaces them by a unique signature that is
used by SPI and I2C.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The write operation using SPI has a many code duplications (similar to
I2C) and four different interfaces per data size. This patch introduces
a single function that centralizes the main task related to SPI.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The write operation using I2C has many code duplications and four
different interfaces per data size. This patch introduces a single
function that centralizes the main tasks.
The central function inserted by this patch can easily replace all the
four functions related to the data size. However, this patch does not
remove any code signature for keeping the meter module work and make
easier to review this patch.
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fixes: correctly handle the data size in the read operation for I2C
The function ade7854_i2c_read_reg_32() have to invoke the
i2c_master_recv() for read 32 bits values, however, the counter is set
to 3 which means 24 bits. This patch fixes the wrong size of 24 bits, to
32 bits.
Signed-off-by: John Syne <john3909@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Fixes: 8d97a5877 ("staging: iio: meter: new driver for ADE7754 devices")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The original code does not correctly handle the error related to I2C
read and write. This patch fixes the error handling related to all
read/write functions for I2C.
Signed-off-by: John Syne <john3909@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Fixes: 8d97a5877 ("staging: iio: meter: new driver for ADE7754 devices")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In adis16201_read_raw() adjust an argument to match an open parentheses
using tabs and spaces.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Prefer reverse christmas tree ordering of declarations to improve
readability.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use sign_extned32() for 32 bit sign extending rather than hard coding.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Clarify the conversion and formation of resultant data in the
adis16201_read_raw() with sufficient comments and remove the unnecessary
comments.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Group register definitions with its register field bits to improve
readability and easy identification. A small comment is also added to
denote the purpose/functionality of the grouped register definitions.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a _REG suffix to distinguish between registers and the register bit
fileds.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Remove few unnecessary comments since the macro definitions clearly
justify their purpose.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Rename the macro definitions with suitable names specifying their
purpose.
* ADIS16201_STARTUP_DELAY_MS: Remove the comment specifying the delay in
microseconds and rename it with addtition of _MS suffix.
* ADIS16201_MSC_CTRL_ACTIVE_DATA_RDY_HIGH: Rename the macro to make it
similar to other misc control registers which denotes the data ready
polarity.
* ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT: Rename to denote it is a
failure bit.
* ADIS16201_GLOB_CMD_FACTORY_RESET: Remove ambiguous _CAL suffix and add
_RESET suffix instead to denote factory reset command.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The `ad7780` driver does not implement setting/getting the sampling
frequency.
For the ad7780/ad7781 devices, the control is done via an external pin,
and the ad7170/ad7171 devices have a fixed sampling rate (so, no control).
For these devices, and similar other that may be added later on,
a AD_SD_CHANNEL_NO_SAMPLE_FREQ() macro has been added, which doesn't set
the IIO_CHAN_INFO_SAMP_FREQ flag.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Now that the old read/write frequency sysfs attrs have been removed, we
have a clean slate to implement IIO_CHAN_INFO_SAMP_FREQ.
This driver also pre-dates IIO_CHAN_INFO_SAMP_FREQ, and this change
implements this behavior.
The `ad7791_write_raw` would have overlapped quite a bit with the old
read/write frequency functions, making things a bit harder to follow.
Fixes: a13e831fcaa7 ("staging: iio: ad7192: implement
IIO_CHAN_INFO_SAMP_FREQ")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In the current state, these attributes are broken, because they are
registered already, and the kernel throws a warning.
The first registration happens via the `IIO_CHAN_INFO_SAMP_FREQ` flag from
the `ad_sigma_delta` driver.
In this commit these attrs are removed, and in the following the
IIO_CHAN_INFO_SAMP_FREQ behavior will be implemented, which replaces these
hooks.
This is done to make things a bit easier to review as there is a bit of
overlap in the patch if it's done all at once.
Fixes: a13e831fcaa7 ("staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Similar to other common iio frameworks, move cros_ec_sensors_core.h from
drivers/iio/common/cros_ec_sensors/ to include/linux/iio/common.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The Apex Embedded Systems STX104 series of devices provides 4 TTL
compatible lines of inputs accessed via a single 4-bit port. Since four
input lines are acquired on a single port input read, the STX104 GPIO
driver may improve multiple input reads by utilizing a get_multiple
callback. This patch implements the stx104_gpio_get_multiple function
which serves as the respective get_multiple callback.
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ixjuser.h includes the telephony.h header. Other than that no kernel
code uses any of these headers. The last user of the ixjuser.h header
has been removed in commit 7326446c728 (Staging: remove telephony
drivers), more than 5 years ago.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a TODO file describing what needs to be added/changed before the driver
can be moved out of staging.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a README file describing the driver architecture, components and
interfaces.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add driver information, link details and hardware statistics to be
reported via ethtool -S.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce the DPAA2 Ethernet Switch driver, which manages Datapath Switch
(DPSW) objects discovered on the MC bus.
Suggested-by: Alexandru Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the command build/parse APIs for operating on DPSW objects through
the DPAA2 Management Complex.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the source files out of staging into their final locations:
- dpcon.c goes to drivers/bus/fsl-mc/, next to the core infrastructure
- dpcon-cmd.h gets merged into drivers/bus/fsl-mc/fsl-mc-private.h, next
to the other internally used APIs
- dpcon.h gets merged into include/linux/fsl/mc.h, exposing the public
API
Update references in the dpaa2-eth staging driver.
DPCON stands for Data Path Concentrator - an interface between DPIO
(Data Path IO) and its users (e.g. dpaa2-eth). You can read more about
DPIO in Documentation/networking/dpaa2/overview.rst
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the source files out of staging into their final locations:
- dpbp.c goes to drivers/bus/fsl-mc/, next to the core infrastructure
- dpbp-cmd.h gets merged into drivers/bus/fsl-mc/fsl-mc-private.h, next
to the other internally used APIs
- dpbp.h gets merged into include/linux/fsl/mc.h, exposing the public
API
Update references in the dpaa2-eth staging driver.
DPBP stands for Data Path Buffer Pool - you can read more about the
object in Documentation/networking/dpaa2/overview.rst
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No one has publicly stepped up to maintain this broken codebase for
devices that no one uses anymore, so let's just drop the whole thing.
If someone really wants/needs it, we can revert this and they can fix
the code up to work properly.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
