summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-28mwifiex: replace num_cmd_timeout with is_cmd_timedoutAmitkumar Karwar
Command timeout happens when firmware goes into bad state. There is no chance that next command will be successful after this. Hence we will maintain a flag instead of count. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: get rid of extra num_cmd_timeout variableAmitkumar Karwar
We already have one in mwifiex_adapter structure. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: block further commands after timeoutAmitkumar Karwar
This patch adds a check in command preparation routine. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: use pre-allocated scatter-gather table for txglommingArend van Spriel
Instead of allocating a scatter-gather table for every transmit reuse a pre-allocated table. The transmit path will be faster by taking out this allocation. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: Correct mcs index reportDaniel Kim
There is a mismatch between the mcs index(0-7) reported to cfg80211 and the actual mcs index(0-15) in use. This patch resolves the mismatch by setting mcs info with the number of chains read from FW. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Daniel Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: Put frame sdio tx error handling in sub function.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: stop AP at shutdown timeAmitkumar Karwar
Deauth is sent to AP when the device is acting as station at shutdown time. Similarly we should stop AP operation also. mwifiex_deauthenticate() takes care closing the connection based on provided interface type. Add a new function to simplify the code. Reported-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: skipping pending commands after unloadAmitkumar Karwar
We skip downloading other commands after FUNC_SHUTDOWN is queued during driver unload. Main thread should be woken up each time after freeing skipped command so that FUNC_SHUTDOWN gets served in case if there are other pending commands before FUNC_SHUTDOWN. Also, call mwifiex_complete_cmd() only for synchronous commands. Reported-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: abort scan while cancelling pending commandAmitkumar Karwar
mwifiex_cancel_pending_ioctl() and mwifiex_cancel_all_pending_cmd() are called in command timeout and driver unload paths respectively. If scan operation is in progress, we should abort it smoothly. Reported-by: Tim Shepard <shep@alum.mit.edu> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: change transmit buffer size for 8897Amitkumar Karwar
Currently default Tx buffer size configured to firmware is 2K for all chipsets. This patch changes it to 4K for SD/PCIe/USB 8897 chipsets as per firmware requirements. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: remove global variable cmd_wait_q_requiredBing Zhao
There is a race condition while queuing synchronous command and asynchronous command requested from different threads, because the wait_q_enabled flag is set based on a global variable cmd_wait_q_required. The issue is fixed by removing this global variable and using a unified function with an argument 'sync' passed into the function. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28rtlwifi: Remove redundant if clauseHeinrich Schuchardt
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: do not reorder groupcast RxVladimir Kondratiev
Groupcast frames are not subject for BACK reordering because they are not ACK'ed and one can't request re-transmitt Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: single station disconnectVladimir Kondratiev
implement del_station() method in the struct cfg80211_ops It allows to disconnect single peer from the AP Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: use ether_addr_equalVladimir Kondratiev
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Provide signal strength indicationVladimir Kondratiev
When notifying about Rx mgmt (ex: during scan), extract signal strength reported by the hardware. signal is not MBM, it is arbitrary units 0..100 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Fill vring2cid_tid table earlyVladimir Kondratiev
Need to fill translation table before calling WMI with WMI_VRING_CFG_CMDID since firmware may generate events during this call; and events need translation table filled to be properly dispatched Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: disconnect only requested peerVladimir Kondratiev
Disconnect event reported by the FW, should lead to disconnection of only requested peer. Find for the appropriate CID and disconnect only it For AP-like interface, notify cfg80211 with del_sta(), for the client type interface, disconnect and turn link off. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: per-connection statisticsVladimir Kondratiev
Calculate statistics per connection, report with "iw station dump" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: dump_station initial supportVladimir Kondratiev
Rx stats is not calculated per STA - just give some number Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: fix BACK status processingVladimir Kondratiev
When FW notifies about BACK status change, it provides ring ID. Process BA status for requested connection only. As for now, FW don't report Rx BACK status, it reports Tx one instead. As per current algorithm used in the firmware, imply Rx BACK state is in sync with Tx one Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: broadcast TxVladimir Kondratiev
Hardware do not support "real" broadcast on the air. Use method similar to the Directed Multicast Service (DMS) as described in the 10.23.15.2 "DMS procedures" This service copies frame and delivers unicast for each associated peer Do the following: send original frame to 1-st Tx vring, and send copies to all other active vrings. As currently hardware/firmware don't support A-MSDU, convert broadcast frame to unicast instead of wrapping it in A-MSDU Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Find free vring for TxVladimir Kondratiev
There are 24 possible Tx vrings; when doind multiple connections, more then one vring has to be used. Search for free one and select it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Block ACKVladimir Kondratiev
When running multiple connections, hardware can't do BACK reordering and it should be done on the host. Model after mac80211's implementation. Drop RCU for now; to be re-added when BACK will be stabilized BACK handshaking is not implemented yet in the hardware, pretend it was done to support the way FW operating Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: multiple connect - initial supportVladimir Kondratiev
Enable multiple (up to 8 - HW/FW limitation) simultaneous connections. Each connection has its own CID (connection ID) that describes chip's beam-forming entity. Tx Vring should refer to correct CID for frame to reach its destination. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: [DEBUG] Improve Vring printingVladimir Kondratiev
Print '_' for the 'idle' descriptors - this makes vring representation more visible. Also, for the Tx side, differentiate descriptors having associated skb's - print ones with skb as 'H' and without as 'h'. Good to represent scattered frames. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: [DEBUG] allow to query Rx and all Tx VRING descriptorsVladimir Kondratiev
Expand debug capabilities to query all Tx/Rx descriptors. Usefull to analyse various hardware/software stall situations. Printed is whole descriptor content and the frame itself. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28wil6210: Tx management frameVladimir Kondratiev
Implement management frame passing. In order to receive frame on the other side, remain_on_channel() should be implemented as well Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: Use atomic functions for intstatus update.Hante Meuleman
The intstatus in sdio code can be updated from different threads. To protect intstatus access, atomic functions are used. The loop was replaced using atomic_set_mask(). Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k_htc: add function ath9k_regwrite_multiOleksij Rempel
... to remove duplicate code Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k_htc: remove unused variable sleepdurationOleksij Rempel
sleepduration is always = intval. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k: remove unused listen_interval and sleepduration.Oleksij Rempel
this variable never changed. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: Track BA sequence number resetPaul Stewart
Some stations reset the sequence number for traffic-ids (TIDs) as they initiate a block-ACK session. In order to detect such behavior, mwifiex must note the starting sequence number given during the ADDBA request. If the first received sequence number after the ADDBA falls outside the receive window for this TID but after the the ADDBA starting sequence number, we can assume that this AP has reset its sequence number during the ADDBA. In this case we must adjust the input window backward to incorporate this received sequence number instead of ignoring it. Otherwise, we could fail to successfully retrieve an arbitrarily large number of downstream frames at the beginning of the block-ACK session. Signed-off-by: Paul Stewart <pstew@chromium.org> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: Small cleanup of redundant code.Hante Meuleman
In time some of the code got redundant, without being noticed. This patch does not change any functionality, just removes redundant code. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: Remove immediate sleep support from SDIO.Hante Meuleman
Immediate sleep support is an aggressive power saving option that has not been enabled in brcmfmac and is removed to simplify code. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: Minimize SDIO dpc scheduling.Hante Meuleman
SDIO dpc scheduling is done (repeated) when counter is set. This counter gets decreased when dpc is finished. It is more efficient to set counter to 0 before the dpc is actullay run. This will minimize the frequency with which dpc is executed. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: de-init driver layers in correct order.Hante Meuleman
First clean up fw signalling, before cleaning up the bus and proto layer. Old order can cause oops in some circumstances. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: Correct header debug dump for sdio tx hdrs.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: remove unused variable data_len from brcmf_sdio_bus_txdata()Arend van Spriel
The local variable data_len is assigned but never used so get rid of it. Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: fix use of skb control buffer in SDIO driver partArend van Spriel
The SDIO driver has a 16-bit field defined in the skbuff control buffer. However, it is accessed as a u32 overwriting other control info. Another issue is that the field is not initialized for networking packets, but the control buffer content is unspecified as other networking layers can use it. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28brcmfmac: Make firmeware roaming a module param.Hante Meuleman
Internal firmware roaming is enabled by default. This patch makes it possible to disable internal firmware roaming by specifying roamoff=1 as module param. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k_htc: use ath9k_cmn_reload_chainmaskOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k: move ath9k_reload_chainmask_settings to commonOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k-common: set maxstream=1 for ar9271Oleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k_htc: use ath9k_cmn_setup_ht_capOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k: move setup_ht_cap to common-initOleksij Rempel
and rename it to ath9k_cmn_setup_ht_cap Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k_htc: use ath9k_cmn_init_channels_ratesOleksij Rempel
and ath_common sbands. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28ath9k: move ath9k_init_channels_rates to common-initOleksij Rempel
and rename it to ath9k_cmn_init_channels_rates. sbands are move to ath_common as well. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwl8k: Adding support to gather survey per channelYogesh Ashok Powar
Survey stats such as channel busy time, rx busy time and noise are collected when sw_scan starts for every switched new channel. This happens till sw_scan stops. All the collected stats are shared up when get_survey() is called. This implements support for ACS feature from Hostapd. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwl8k: Implement sw_scan start/stop cbsYogesh Ashok Powar
Implement sw_scan start and stop callbacks. Reset BBP registers for channel, RX busy and average noise stats which clear on read. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 01:07:05 +0000