summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-22of: add helper for getting endpoint node of specific identifiersHyungwon Hwang
When there are multiple ports or multiple endpoints in a port, they have to be distinguished by the value of reg property. It is common. The drivers can get the specific endpoint in the specific port via this function. Now the drivers have to implement this code in themselves or have to force the order of dt nodes to get the right node. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Acked-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-22drm/exynos: add Exynos5433 decon driverJoonyoung Shim
DECON(Display and Enhancement Controller) is new IP replacing FIMD in Exynos5433. This patch adds Exynos5433 decon driver. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-22drm/exynos: fix the input prompt of Exynos7 DECONHyungwon Hwang
This patch is a preparation patch for adding support for Exynos5433 DECON. Exynos7 DECON have to be distinguished from Exynos5433 DECON. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-22drm/exynos: add drm_iommu_attach_device_if_possible()Hyungwon Hwang
Every CRTC drivers in Exynos DRM implements the code which checks whether IOMMU is supported or not, and if supported enable it. Making new helper for it generalize each CRTC drivers. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-22drm/exynos: Add the dependency for DRM_EXYNOS to DPI/DSI/DPHyungwon Hwang
Without this dependency, Kbuild is confused and the configs below them are not placed under Exynos DRM. This patch fixes it, so the configs below them become to be placed under Exynos DRM. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-22drm/exynos: remove the dependency of DP driver for ARCH_EXYNOSHyungwon Hwang
This dependency is a historical thing. It is added when this DP driver is under media subsystem. Now because it is under Exynos DRM, this dependency is not needed anymore. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: do not wait for vblank at atomic operationInki Dae
This patch resolves the issue that refresh rate got low at extension mode test with fimd and vidi combination. The problem was because atomic_commit callback waited for the completion of vblank to gaurantee crtc relevant registers are updated from shadow registers to real ones. However, the waiting there is really unnecessary because page flip operation does already it. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: Remove unused vma field of exynos_drm_gem_objKrzysztof Kozlowski
The field 'vma' of 'exynos_drm_gem_obj' structure was introduced in 2a3098ff6c21 ("drm/exynos: add userptr feature for g2d module") but is not referenced anywhere. One instance of 'exynos_drm_gem_obj' may be mapped to multiple user-space VMAs so 'vma' field does not look useful anyway. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: fimd: fix page fault issue with iommuInki Dae
This patch resolves page fault issue with iommu and atomic feature when modetest test application is terminated. ENWIN_F field of WINCONx register enables or disable a dma channel to each hardware overlay - the value of the field will be updated to real register after vsync. So this patch makes sure the dma channel is disabled by waiting for vsync one time after clearing shadow registers to all dma channels. Below shows the page fault issue: setting mode 720x1280-60Hz@XR24 on connectors 31, crtc 29 freq: 59.99Hz [ 34.831025] PAGE FAULT occurred at 0x20400000 by 11e20000.sysmmu(Page table base: 0x6e324000) [ 34.838072] Lv1 entry: 0x6e92dc01 [ 34.841489] ------------[ cut here ]------------ [ 34.846058] kernel BUG at drivers/iommu/exynos-iommu.c:364! [ 34.851614] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 34.857428] Modules linked in: <--snip--> [ 35.210894] [<c02880d0>] (exynos_sysmmu_irq) from [<c00608f8>] (handle_irq_event_percpu+0x78/0x134) [ 35.219914] [<c00608f8>] (handle_irq_event_percpu) from [<c00609f0>] (handle_irq_event+0x3c/0x5c) [ 35.228768] [<c00609f0>] (handle_irq_event) from [<c0063698>] (handle_level_irq+0xc4/0x13c) [ 35.237101] [<c0063698>] (handle_level_irq) from [<c005ff7c>] (generic_handle_irq+0x2c/0x3c) [ 35.245521] [<c005ff7c>] (generic_handle_irq) from [<c02214ec>] (combiner_handle_cascade_irq+0x94/0x100) [ 35.254980] [<c02214ec>] (combiner_handle_cascade_irq) from [<c005ff7c>] (generic_handle_irq+0x2c/0x3c) [ 35.264353] [<c005ff7c>] (generic_handle_irq) from [<c0060248>] (__handle_domain_irq+0x7c/0xec) [ 35.273034] [<c0060248>] (__handle_domain_irq) from [<c0009434>] (gic_handle_irq+0x30/0x68) [ 35.281366] [<c0009434>] (gic_handle_irq) from [<c0012ec0>] (__irq_svc+0x40/0x74) Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: iommu: improve a check for non-iommu dma_opsMarek Szyprowski
DRM Exynos driver is relying on dma-mapping internal structures when used with IOMMU enabled. This patch partially hides dma-mapping internal things by using proper get_dma_ops/set_dma_ops calls. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: iommu: detach from default dma-mapping domain on initMarek Szyprowski
This patch adds code, which detach sub-device nodes from default iommu domain if such has been configured. This lets Exynos DRM driver to properly attach sub-devices to its own, common for all sub-devices domain. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: fimd: ensure proper hw state in fimd_clear_channel()Marek Szyprowski
One should not do any assumptions on the stare of the fimd hardware during driver initialization, so to properly reset fimd before enabling IOMMU, one should ensure that all power domains and clocks are really enabled. This patch adds pm_runtime and clocks management in the fimd_clear_channel() function to ensure that any access to fimd registers will be performed with clocks and power domains enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: initialize VIDCON0 when fimd is disabledJoonyoung Shim
When the fimd is disabled by fimd_disable(), enabled overlay layers also are disabled. If clocks for fimd are enabled by fimd_enable() on this case, it can lead IOMMU page fault. The reason is that VIDCON0_ENVID and VIDCON0_ENVID_F bits of VIDCON0 register are set still even though fimd is disabled, so it may continue display output of prior when clocks for fimd are enabled again. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: remove chained calls to enableJoonyoung Shim
With atomic modesetting all the control for CRTC, Planes, Encoders and Connectors should come from DRM core, so the driver is not allowed to enable or disable planes from inside the crtc_enable()/disable() call. But it needs to disable planes with crtc_disable in exynos driver internally. Because crtc is disabled before plane is disabled, it means plane_disable just returns without any register changes, then we cannot be sure setting register to disable plane when crtc is disable. This patch removes this chainned calls to enable plane from exynos hw drivers code letting only DRM core touch planes except to disable plane. Also it leads eliminable enabled and resume of struct exynos_drm_plane. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: remove to call mixer_wait_for_vblankJoonyoung Shim
The reason waiting vblank is to be power gated and disabled clocks after dma operation is completed. The dma operation is stopped already before be power gated and clocks are disabled when mixer is disabled by commit 381be025ac1a6("drm/exynos: stop mixer before gating clocks during poweroff"). Don't need to wait vblank anymore. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: ipp: validate a GEM handle with multiple planesHyungwon Hwang
FIMC & GSC driver can calculate the offset of planes. So there are use cases which IPP receives just one GEM handle of an image with multiple plane. This patch extends ipp_validate_mem_node() to validate this case. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: ipp: fix wrong index referencing a config elementHyungwon Hwang
Config depends on the opreation. So it must be referenced by an operation id, not a property id. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: dsi: check whether dsi is enabled before sending dataHyungwon Hwang
exynos_dsi_host_transfer() can be called through a panel driver while DSI is turning down. It is possible because the function checks only whether DSI is initialized or not, and there is a moment which DSI is set by uninitialized, but DSI is still turning down. To prevent it, DSI must be set by disabled before starting to be turned down, and exynos_dsi_host_transfer() must check whether DSI is enabled or not. Kernel dump: [ 4721.351448] Unhandled fault: synchronous external abort (0x96000210) at 0xffffff800015e018 [ 4721.351809] Internal error: : 96000210 [#1] PREEMPT SMP [ 4721.352031] Modules linked in: [ 4721.352173] CPU: 2 PID: 300 Comm: deviced Tainted: G W 4.0.4-01017-g7964a87 #1 [ 4721.353989] Hardware name: Samsung DRACO board (DT) [ 4721.358852] task: ffffffc0a0b70000 ti: ffffffc0a00ec000 task.ti: ffffffc0a00ec000 [ 4721.366327] PC is at exynos_dsi_enable_lane+0x14/0x5c [ 4721.371353] LR is at exynos_dsi_host_transfer+0x834/0x8d8 [ 4721.376731] pc : [<ffffffc000432bcc>] lr : [<ffffffc000434590>] pstate: 60000145 [ 4721.384107] sp : ffffffc0a00efbe0 [ 4721.387405] x29: ffffffc0a00efbe0 x28: ffffffc0a00ec000 [ 4721.392699] x27: ffffffc000968000 x26: 0000000000000040 [ 4721.397994] x25: ffffffc000f74dc0 x24: ffffffc0a00efec8 [ 4721.403290] x23: ffffffc0a4815400 x22: ffffffc0009f2729 [ 4721.408584] x21: ffffffc0a00efcc8 x20: ffffffc0a4a2a848 [ 4721.413879] x19: ffffffc0a4a2a818 x18: 0000000000000004 [ 4721.419173] x17: 0000007faa5cddf0 x16: ffffffc0001a40a8 [ 4721.424469] x15: 0000000000000009 x14: 000000000000000d [ 4721.429762] x13: 6e6e6f63206b726f x12: 0000000000000010 [ 4721.435058] x11: 0101010101010101 x10: 0000000000000000 [ 4721.440353] x9 : 000000000000000a x8 : 8386838282818381 [ 4721.445648] x7 : ffffffc0a201efe8 x6 : 0000000000000000 [ 4721.450943] x5 : 00000000fffffffa x4 : ffffffc0a201f170 [ 4721.456237] x3 : ffffff800015e000 x2 : ffffff800015e018 [ 4721.461531] x1 : 000000000000000f x0 : ffffffc0a4a2a818 [ 4721.466826] [ 4721.468305] Process deviced (pid: 300, stack limit = 0xffffffc0a00ec028) [ 4721.474989] Stack: (0xffffffc0a00efbe0 to 0xffffffc0a00f0000) [ 4721.480720] fbe0: a00efca0 ffffffc0 0042c944 ffffffc0 a0f2d680 ffffffc0 00000024 00000000 [ 4721.488895] fc00: a4b6d000 ffffffc0 009f2729 ffffffc0 a4815400 ffffffc0 a00efec8 ffffffc0 Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: remove SoC checking codeAndrzej Hajda
SoC checking code is not necessary anymore, as exynos_drm_match_add and exynos_drm_platform_probe already properly handles situation when there are no Exynos DRM components. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: fix broken component binding in case of multiple pipelinesAndrzej Hajda
In case there are multiple pipelines and deferred probe occurs, only components of the first pipeline were bound. As a result only one pipeline was available. The main cause of this issue was dynamic generation of component match table - every component driver during probe registered itself on helper list, if there was at least one pipeline present on this list component match table were created without deferred components. This patch removes this helper list, instead it creates match table from existing devices requiring exynos_drm KMS drivers. This way match table do not depend on probe/deferral order and contains all KMS components. As a side effect patch makes the code cleaner and significantly smaller. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: consolidate driver/device initialization codeAndrzej Hajda
Code registering different drivers and simple platform devices was dispersed across multiple sub-modules. This patch moves it to one place. As a result initialization code is shorter and cleaner and should simplify further development. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: add error messages if clks failed to get enabledGustavo Padovan
Check error and call DRM_ERROR if clk_prepare_enable() fails. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: add a dependency on FB_S3C to DECON driverInki Dae
This patch makes one of Linux framebuffer and DRM CRTC drivers to be enabled. Display controllers, FIMD and DECON, can be controlled by Linux framebuffer or DRM CRTC drivers so only one of them should be enabled. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2015-06-20drm/exynos: vidi: remove unused varablesInki Dae
This patch removes unnsed varables in vidi_disable function. Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2015-06-20drm/exynos: split exynos_crtc->dpms in enable() and disable()Gustavo Padovan
To follow more closely the new atomic API we split the dpms() helper into the enable() and disable() helper to get exactly the same semantics. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: remove unnecessary calls to disable_plane()Gustavo Padovan
The planes are already disabled by the drm_atomic_helper_commit() code so we don't need to disable the in these two places. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic dpms supportGustavo Padovan
Run dpms operations through the atomic intefaces. This basically removes the .dpms() callback from econders and crtcs and use .disable() and .enable() to turn the crtc on and off. v2: Address comments by Joonyoung: - make hdmi code call ->disable() instead of ->dpms() - do not use WARN_ON on crtc enable/disable v3: - Fix build failure after the hdmi change in v2 - Change dpms helper of ptn3460 bridge v4: - remove win_commit() call from .enable() v5: - move .atomic_check() to the atomic PageFlip patch, and transform it in .atomic_begin() Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: add exynos specific .atomic_commit()Gustavo Padovan
exynos needs to update planes with the crtc enabled (mainly for the FIMD case) so this specific atomic commit changes the order of drm_atomic_helper_commit_modeset_enables() and drm_atomic_helper_commit_planes() to commit planes after we enable crtc and encoders. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: move exynos_drm_crtc_disable()Gustavo Padovan
This is a preparation commit to move exynos_drm_crtc_disable() together with the future exynos_drm_crtc_enable() that will come from the split of exynos_drm_crtc_dpms() callback. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: don't disable unused functions at initGustavo Padovan
Everything starts disabled so we don't really need to disable anything. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: remove exported functions from exynos_drm_planeGustavo Padovan
Now that no one is using the functions exported by exynos_drm_plane due to the atomic conversion we can make remove some of the them or make them static. v2: remove unused exynos_drm_crtc v3: fix checkpatch error (reported by Joonyoung) Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic phase 3: convert page flipsGustavo Padovan
PageFlips now use the atomic helper to work through the atomic modesetting API. Async page flips are not supported yet. v2: Add .atomic_begin() step to handle the vblank part we removed from exynos page_flip code. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic phase 3: use atomic .set_config helperGustavo Padovan
Now that phase 1 and 2 are complete switch .set_config helper to use the atomic one. v2: also remove .prepare() callback v3: remove .mode_set() and .mode_set_base() and encoder's .prepare() callbacks Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic phase 3: atomic updates of planesGustavo Padovan
Now that phase 1 and 2 are complete we can switch the update/disable_plane callbacks to their atomic version. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic phase 2: keep track of framebuffer pointerGustavo Padovan
Use drm_atomic_set_fb_for_plane() in the legacy page_flip path to keep track of the framebuffer pointer and reference. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic phase 2: wire up state reset(), duplicate() and destroy()Gustavo Padovan
Set CRTC, planes and connectors to use the default implementations from the atomic helper library. The helpers will work to keep track of state for each DRM object. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: use adjusted_mode of crtc_state instead of modeJoonyoung Shim
Handle changes by removing copy from adjusted_mode to mode as using adjusted_mode of crtc_state. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic phase 1: add .mode_set_nofb() callbackGustavo Padovan
The new atomic infrastructure needs the .mode_set_nofb() callback to update CRTC timings before setting any plane. v2: remove WARN_ON(!crtc->state) from mode_set_nofb Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic phase 1: use drm_plane_helper_disable()Gustavo Padovan
The atomic helper to disable planes also uses the optional .atomic_disable() helper. The unique operation it does is calling .win_disable() Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic phase 1: use drm_plane_helper_update()Gustavo Padovan
Rip out the check from exynos_update_plane() and create exynos_check_plane() for the check phase enabling use to use the atomic helpers to call our check and update phases when updating planes. Update all users of exynos_update_plane() accordingly to call exynos_check_plane() before. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>y Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: fix source data argument for planeJoonyoung Shim
The exynos_update_plane function needs 16.16 fixed point source data. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-18Merge branch 'virtio-gpu-drm-next' of git://git.kraxel.org/linux into drm-nextDave Airlie
fixes and virtio-vga support. * 'virtio-gpu-drm-next' of git://git.kraxel.org/linux: virtio-gpu: add locking for vbuf pool drm/virtgpu: initialise fbdev after getting initial display info Add virtio-vga bits.
2015-06-18Merge tag 'drm/panel/for-4.2-rc1' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-next drm/panel: Changes for v4.2-rc1 This contains fixes for the long-standing build issues that some of the bridge drivers were exposing. Other than that it's mostly cleanup and a couple of new simple panels that are supported. * tag 'drm/panel/for-4.2-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/panel: simple: Add bus format for HannStar HSD100PXN1 drm/panel: simple: Add display timing for HannStar HSD100PXN1 drm/panel: ld9040: Remove useless padding drm/panel: Constify OF match tables drm/bridge: Remove stale ptn3460.h include drm/bridge: ps8622: Include linux/gpio/consumer.h drm/bridge: ptn3460: Include linux/gpio/consumer.h drm/bridge: dw-hdmi: Return number of EDID modes drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel drm/bridge: ptn3460: Pass flags to devm_gpiod_get() drm/bridge: ps8622: Pass flags to devm_gpiod_get() drm/bridge: ptn3460: Fix I2C ID table to match the reported modalias drm/bridge: dw-hdmi: Staticize dw_hdmi_bridge_funcs
2015-06-18Merge tag 'drm/tegra/for-4.2-rc1' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Changes for v4.2-rc1 This contains a couple of mostly fixes for issues that have crept up in recent versions of linux-next. One issue is that DP AUX transactions of more than 4 bytes will access the wrong FIFO registers and hence become corrupt. Another fix is required to restore functionality of Tegra20 if using the GART. The current code expects the IOMMU aperture to be the complete 4 GiB address space, whereas the GART on Tegra20 only provides a 128 MiB aperture. One more issue with IOMMU support is that on 64-bit ARM, swiotlb is the default IOMMU implementation backing the DMA API. A side-effect of that is that when dma_map_sg() is called to flush caches (yes, this is a bit of a hack, but ARM does not provide a better API), swiotlb will immediately run out of memory because its bounce buffer is too small to make a framebuffer. Finally I've included a mostly cosmetic fix that stores register values in u32 rather than unsigned long to avoid sign-extension issues on 64- bit ARM. This is only a precaution since it hasn't caused any issues (yet). * tag 'drm/tegra/for-4.2-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: dpaux: Registers are 32-bit drm/tegra: gem: Flush pages after allocation drm/tegra: gem: Take into account IOMMU aperture drm/tegra: dpaux: Fix transfers larger than 4 bytes
2015-06-18Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-nextDave Airlie
rcar-du fixes * 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev: drm: rcar-du: Use the drm atomic state duplication helpers for planes drm: rcar-du: Clean up planes in the error paths of .atomic_commit() drm: rcar-du: Convert rcar_du_encoders_init_one() return value to 0/<0 drm: rcar-du: Clarify error message when encoder initialization fails drm: rcar-du: Fix crash with groups that have less than 9 planes drm: rcar-du: Disable all planes when stopping the CRTC drm: rcar-du: Print the error value when DRM/KMS init fails
2015-06-18Merge tag 'drm-amdkfd-next-fixes-2015-06-16' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-next - Dan fixed some range checks in the address watch ioctl impl. - Remove obsolete member from radeon_device structure * tag 'drm-amdkfd-next-fixes-2015-06-16' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: fix some range checks in address watch ioctl drm/radeon: remove obsolete kfd_bo from radeon_device
2015-06-16drm/amdkfd: fix some range checks in address watch ioctlDan Carpenter
buf_size_in_bytes must be large enough to hold ->num_watch_points and watch_mode so I have added a sizeof(int) * 2 to the minimum size. Also we have to subtract sizeof(*args) from the max args_idx limit so that it matches the allocation. Also I changed a > to >= for the last compare. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2015-06-16drm: rcar-du: Use the drm atomic state duplication helpers for planesLaurent Pinchart
Ensure that the duplicate and destroy plane state operations will always be in sync with the DRM core implementation of the plane state by using the __drm_atomic_helper_plane_duplicate_state() and __drm_atomic_helper_plane_destroy_state() functions designed especially for this purpose. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-06-16drm: rcar-du: Clean up planes in the error paths of .atomic_commit()Laurent Pinchart
When the .atomic_commit() handler fails, clean up planes previoulsy prepared by drm_atomic_helper_prepare_planes() with a call to drm_atomic_helper_cleanup_planes(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2015-06-16drm: rcar-du: Convert rcar_du_encoders_init_one() return value to 0/<0Laurent Pinchart
The function returns 1 on success, and either 0 or a negative error code on failure. As the 0 and negative values don't need to be differentiated by the caller, convert it to the usual scheme of returning 0 on success and a negative error code on failure. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-27 02:37:21 +0000