summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-03ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUsLina Iyer
Each Krait CPU in the QCOM 8074/8974 SoC has an SAW power controller to regulate the power to the cpu and aide the core in entering idle states. Reference the SAW instance and associate the instance with the CPU core. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03devicetree: bindings: Document qcom,idle-statesLina Iyer
Document cpuidle states of QCOM cpus. In addition to arm-idle-state compatible string, the ARM idle state definition must define one of the following compatible strings - "qcom,idle-state-ret", "qcom,idle-state-spc", "qcom,idle-state-pc", The compatibles helps the SPM platform driver to use the correct idle function when the index to the idle state is passed to the platform driver. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03devicetree: bindings: Update qcom,saw2 node bindingsLina Iyer
Update qcom,saw2 node bindings with compatible strings to identify nodes that provides cpuidle functionality for a particular SoC. Remove unused compatible strings. Update examples for different SAW nodes. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03dt-bindings: Add #defines for MSM8916 clocks and resetsGeorgi Djakov
Add clocks/resets defines for the global clock controller found on Qualcomm MSM8916 SoCs. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device treeKenneth Westfield
Model the Qualcomm Technologies LPASS hardware for the ipq806x SOC. Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org> Acked-by: Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodesIvan T. Ivanov
PMA8084 have 2 SPMI devices per physical package. Add their configuration nodes and include them in boards which are using AQP8084 based chipset. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodesIvan T. Ivanov
PM8841 and PM8941 have 2 SPMI devices per physical package. Add their configuration nodes and include them in boards which are using 8x74 based chipset. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974Ivan T. Ivanov
Add SPMI PMIC Arbiter configuration nodes for APQ8084 and MSM8974. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03arm: dts: qcom: Add LCC nodesKumar Gala
Add the node for the LPASS clock controller found on a few qcom SoCs so that the clock driver can probe. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> [sboyd@codeaurora.org: Added apq8064 and msm8960 nodes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03arm: dts: qcom: Add TCSR support for MSM8960Andy Gross
This patch adds TCSR support for use by the GSBI to automatically configure ADM CRCI values based on the GSBI port configuration. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03arm: dts: qcom: Add TCSR support for MSM8660Andy Gross
This patch adds TCSR support for use by the GSBI to automatically configure ADM CRCI values based on the GSBI port configuration. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03arm: dts: qcom: Add TCSR support for IPQ8064Andy Gross
This patch adds TCSR support for use by the GSBI to automatically configure ADM CRCI values based on the GSBI port configuration. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03arm: dts: qcom: Add TCSR support for APQ8064Andy Gross
This patch adds TCSR support for use by the GSBI to automatically configure ADM CRCI values based on the GSBI port configuration. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03mfd: qcom,tcsr: Add device tree binding for TCSRAndy Gross
This patch adds the device tree binding for the Qualcomm Top Control and Status Register device. The TCSR is comprised of a set of registers that provide various control and status functions for attached peripherals. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03arm: qcom: dts: gic: add compatible string for Qualcomm MSM GICsKumar Gala
Document the Qualcomm MSM GICs implementation as compatible with the ARM GIC standard. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03Merge tag 'omap-for-v4.1/wl12xx-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "wireless wl12xx and omap device tree changes for v4.1" from Tony Lindgren: Wireless and omap changes to make wl12xx driver to use device tree data instead of platform data from Eliad Peller <eliad@wizery.com>: - Add device-tree support to the wlcore (wl12xx/wl18xx) driver. - Update the current users to use the bindings instead of pdata-quirks. - Finally, remove the deprecated wl12xx_platform_data struct Note that da850 board file code that still uses the platform data, but we have da850.dtsi that can be used instead. So it was decided that we should try to remove the wl12xx support from the da850 board file as suggested by Sekhar Nori <nsekhar@ti.com>. As it's the last patch in the series, the last patch can be simply reverted if needed. As this series touches quite a bit of arch code, it was suggested by Kalle Valo <kvalo@codeaurora.org> that the whole series should be merged via the arm-soc tree. * tag 'omap-for-v4.1/wl12xx-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: wlcore: remove wl12xx_platform_data ARM: dts: add wl12xx/wl18xx bindings wlcore: add device-tree support dt: bindings: add TI's wilink wireless device wl12xx: use frequency instead of enumerations for pdata clocks wlcore: set irq_trigger in board files instead of hiding behind a quirk + Linux 4.0-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03ARM: dts: fix typo in bcm7445.dtsiOlof Johansson
Reported-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03Merge tag 'arm-soc/for-4.1/devicetree-part-3' of ↵Olof Johansson
http://github.com/broadcom/stblinux into next/dt Merge "Broadcom Device Tree changes for 4.1 #3" from Brian Norris: This pull request contains changes to the BCM7445 reference DTS files from Brian: - making a clock-frequency property decimal instead of hexadecimal - adding the irq0 interrupt controller node to make the reference DTS bootable again * tag 'arm-soc/for-4.1/devicetree-part-3' of http://github.com/broadcom/stblinux: ARM: dts: brcmstb: add IRQ0 controller ARM: dts: brcmstb: un-hexify clock frequency Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03Merge tag 'at91-dt2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt Merge "at91: dt for 4.1 #2" from Nicolas Ferre: Second batch of DT changes for 4.1: - RTC nodes for at91sam9x5 boards and at91sam9n12ek - HLCDC nodes and pin definitions for sama5d3 & sama5d4 - additional uarts for sama5d3 * tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sama5d4: add rgb777 LCD line configuration ARM: at91/dt: sama5d4: fix LCD pins for RGB666 format ARM: at91/dt: sama5d4: add hlcdc node ARM: at91/dt: sama5d4: add lcdc pin definitions ARM: at91/dt: sama5d3: add uart1 pinctrl definition ARM: at91/dt: sama5d3: add uart0 ARM: at91/dt: define the HLCDC node available on sama5d3 SoCs ARM: at91/dt: add alternative pin muxing for sama5d3 lcd pins ARM: at91/dt: split sama5d3 lcd pin definitions to match RGB mode configs ARM: at91/dt: at91sam9n12ek: enable RTC ARM: at91/dt: at91sam9x5cm: enable RTC DT: video: atmel_lcdc: Add example of fixed framebuffer memory Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03Merge tag 'mvebu-dt-4.1-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson
Merge "ARM: mvebu: dt changes for v4.1 (round 2)" from Gregory Clement: mvebu dt changes for v4.1 (part #2) - add support for Performance Monitor Unit on most of mvebu SoCs - add nas2big support - add support for USB3 port On Armada 385 AP * tag 'mvebu-dt-4.1-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: armada-385-ap: Enable USB3 port ARM: mvebu: Enable Performance Monitor Unit on Armada 380/385 SoC ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC ARM: mvebu: Enable Performance Monitor Unit on Armada XP/370 SoCs ARM: Kirkwood: add DT description for nas2big Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03Merge tag 'v4.1-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap device tree changes for v4.1, part1" from Tony Lindgren: Device tree related changes for omaps: - Add support for ChiliSOM - Add support for OpenPandora - Add support for BeagleBoard NAND - Enable crypto devices for omap3 devices - Add bindings for omap3 camera support - Updates for am437x and dra7x and dm816x SoCs * tag 'v4.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits) ARM: dts: Update Nanobone dts file ARM: dts: n950, n9: Add primary camera support ARM: dts: omap3: Add DT entries for OMAP 3 ISP Documentation: DT: Add bindings for omap3isp ARM: dts: Remove files omap34xx-hs.dtsi and omap36xx-hs.dtsi ARM: dts: omap3-tao3530: Include directly omap34xx.dtsi ARM: dts: n900: Enable omap sham and include directly omap34xx.dtsi ARM: dts: n9/n950: Enable omap crypto support ARM: dts: Remove PIN_INPUT for dm816x McSPI ARM: dts: Add cppi41 support for dm816x MUSB ARM: dts: Fix typo for dm816x usb0_pins ARM: dts: dra7x-evm: beagle-x15: Fix USB Peripheral ARM: dts: am57xx-beagle-x15: Do not include the atl header ARM: dts: DRA7: Remove ti,timer-dsp and ti,timer-pwm properties Documentation: omap-twl4030: Move ti,codec property to optional ARM: dts: omap3: Remove all references to ti,codec property ARM: dts: omap3-beagle: Add NAND device ARM: dts: AM4372: update hdq compatible property ARM: dts: omap3-pandora: add DM3730 1 GHz version ARM: dts: omap3-pandora: add OMAP3530 600 MHz version ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-01Merge tag 'renesas-dt3-for-v4.1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Third Round of Renesas ARM Based SoC DT Updates for v4.1" from Simon Horman: * Add DMA sound support to r8a7791 and r8a7790 SoCs * tag 'renesas-dt3-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7791: sound enables Audio DMAC entry on DTSI ARM: shmobile: r8a7790: sound enables Audio DMAC entry on DTSI ARM: shmobile: r8a7791: enable Audio DMAC peri peri via sound driver ARM: shmobile: r8a7790: enable Audio DMAC peri peri via sound driver ARM: shmobile: r8a7791: add reg-names for sound ARM: shmobile: r8a7790: add reg-names for sound Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-01Merge tag 'v4.1-rockchip-dts1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "ARM: rockchip: dts changes for 4.1" from Heiko Stuebner: This adds and enables the usbphy nodes on the rk3288 boards and enables the gmac on the firefly board. A new board the Popmetal-rk3288 is also added. And finally the pmic supplies for act8846 based boards are added, as the act8865/act8846 driver gained supply handling in the regulator tree. * tag 'v4.1-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: complete rk3288-evb pmic supplies ARM: dts: rockchip: add input supplies for the act8846 on Radxa Rock ARM: dts: add rk3288 PopMetal board dt-bindings: add root compatible property for PopMetal board ARM: dts: rockchip: enable gmac on rk3288-firefly ARM: dts: rockchip: enable usbphy on rk3288-firefly ARM: dts: rockchip: Enable usb PHY on rk3288-evb board ARM: dts: rockchip: add rk3288 usb PHY Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-01ARM: dts: fix typo in makefile for alpine-dbOlof Johansson
File uses dash in the filename, not underscore. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-24wlcore: remove wl12xx_platform_dataEliad Peller
Now that we have wlcore device-tree bindings in place (for both wl12xx and wl18xx), remove the legacy wl12xx_platform_data struct, and move its members into the platform device data (that is passed to wlcore) Davinci 850 is the only platform that still set the platform data in the legacy way (and doesn't have DT bindings), so remove the relevant code/Kconfig option from the board file (as suggested by Sekhar Nori) Since no one currently uses wlcore_spi, simply remove its platform data support (DT bindings will have to be added if someone actually needs it) Signed-off-by: Luciano Coelho <luca@coelho.fi> Signed-off-by: Eliad Peller <eliad@wizery.com> Tested-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-24ARM: dts: add wl12xx/wl18xx bindingsEliad Peller
Replace all the pdata-quirks for setting wl12xx/wl18xx platform data with proper DT definitions. Signed-off-by: Eliad Peller <eliad@wizery.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Nikita Kiryanov <nikita@compulab.co.il> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-24wlcore: add device-tree supportEliad Peller
When running with device-tree, we no longer have a board file that can set up the platform data for wlcore. Allow this data to be passed from DT. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Tested-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-24dt: bindings: add TI's wilink wireless deviceEliad Peller
Add device tree binding documentation for TI's wilink (wl12xx and wl18xx) wlan chip. Signed-off-by: Eliad Peller <eliad@wizery.com> Tested-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-24wl12xx: use frequency instead of enumerations for pdata clocksLuciano Coelho
Instead of defining an enumeration with the FW specific values for the different clock rates, use the actual frequency instead. Also add a boolean to specify whether the clock is XTAL or not. Change all board files to reflect this. Signed-off-by: Luciano Coelho <luca@coelho.fi> [Eliad - small fixes, update board file changes] Signed-off-by: Eliad Peller <eliad@wizery.com> Tested-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-23ARM: at91/dt: sama5d4: add rgb777 LCD line configurationNicolas Ferre
For the SAMA5D4 SoC, some LCD lines are in conflict with useful peripherals. Remove these lines and the lowest significant bit of a 24 bit LCD. It gives us a RGB 777 configuration. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: sama5d4: fix LCD pins for RGB666 formatNicolas Ferre
The color arrangement for SAMA5D4 in RGB 666 takes the most significant bits of each color line groups. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: sama5d4: add hlcdc nodeBoris Brezillon
Add HLCDC node. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: sama5d4: add lcdc pin definitionsBoris Brezillon
Add LCDC pin definitions. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: sama5d3: add uart1 pinctrl definitionNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: sama5d3: add uart0Nicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
2015-03-23ARM: at91/dt: define the HLCDC node available on sama5d3 SoCsBoris Brezillon
Define the HLCDC (HLCD Controller) IP available on some sama5d3 SoCs (i.e. sama5d31, sama5d33, sama5d34 and sama5d36) in sama5d3 dtsi file. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: add alternative pin muxing for sama5d3 lcd pinsBoris Brezillon
Define alternative pin muxing for the LCDC pins. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: split sama5d3 lcd pin definitions to match RGB mode configsBoris Brezillon
The HLCDC (HLCD Controller) IP supports 4 different output mode (RGB444, RGB565, RGB666 and RGB888) and the pin muxing will depend on the chosen RGB mode. Split pin definitions to be able to set pin config according to the selected mode. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: at91sam9n12ek: enable RTCNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23ARM: at91/dt: at91sam9x5cm: enable RTCNicolas Ferre
Enable RTC for all the at91sam9x5 CPU Modules: this will enable it for all the EK boards. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-23DT: video: atmel_lcdc: Add example of fixed framebuffer memoryAlexander Stein
This drivers allows a fixed framebuffer memory to be set by an additional IORESOURCE_MEM resource. Thus add an example to the DT documentation. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19wlcore: set irq_trigger in board files instead of hiding behind a quirkLuciano Coelho
The platform_quirk element in the platform data was used to change the way the IRQ is triggered. When set, the EDGE_IRQ quirk would change the irqflags used and treat edge trigger differently from the rest. Instead of hiding this irq flag setting behind the quirk, have the board files set the irq_trigger explicitly. This will allow us to use standard irq DT definitions later on. Signed-off-by: Luciano Coelho <luca@coelho.fi> [Eliad - rebase, add irq_trigger field and pass it, update board file changes] Signed-off-by: Eliad Peller <eliad@wizery.com> Tested-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19ARM: dts: Update Nanobone dts fileMark Jackson
Update dts file to reflect:- * new flash memory layout * add missing phy-mode property * dual_emac now just a boolean * rename mcp to microchip * update gpio definition Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19ARM: dts: n950, n9: Add primary camera supportSakari Ailus
Add support for the primary camera of the Nokia N950 and N9. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19ARM: dts: omap3: Add DT entries for OMAP 3 ISPSakari Ailus
The resources the ISP needs are slightly different on 3[45]xx and 3[67]xx. Especially the phy-type property is different. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [tony@atomide.com: use omap3_scm_general instead of scm_conf for now] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19Documentation: DT: Add bindings for omap3ispSakari Ailus
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19ARM: dts: brcmstb: add IRQ0 controllerBrian Norris
This L2 controller handles multiplexing a few different interrupts. We also need it for configuring the interrupt forwarding masks for the UART. With this, we can *now* boot BCM7445 to a prompt using the upstream kernel + DTB. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-19ARM: dts: Remove files omap34xx-hs.dtsi and omap36xx-hs.dtsiPali Rohár
These files are not used by any DTS file anymore. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19ARM: dts: brcmstb: un-hexify clock frequencyBrian Norris
This value makes much more sense in decimal. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-19ARM: dts: omap3-tao3530: Include directly omap34xx.dtsiPali Rohár
This patch just move content of file omap34xx-hs.dtsi into omap3-tao3530.dts. There is no code change, patch is just preparation for removing -hs file. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 21:35:58 +0000