summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-26ARM: OMAP: mcbsp: Make threshold based transfer code genericJarkko Nikula
Remove CONFIG_ARCH_OMAP3 conditional compilation and cpu_is_omap34xx test around buffer threshold based transfer and DMA operating mode control. Use instead the buffer_size in platform data to determine when these sysfs controls are exposed and when to access related McBSP registers. Rationale for this is to make code generic and to allow to use it on OMAP4 that also supports threshold based transfers. Currently buffer_size variable is set only for OMAP3 SoCs but it is easy to extend to OMAP4 and any later OMAP version. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Make tranceiver configuration control register access genericJarkko Nikula
McBSP transmit and receive configuration control registers must be set up for OMAP2430 and later. Replace is_omap tests in generic code with a new feature flag has_ccr in platform data so that there is no need to change code for any upcoming OMAP version. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Make wakeup control genericJarkko Nikula
Currently wakeup control code is compiled only when CONFIG_ARCH_OMAP3 is set even it should be available for CONFIG_ARCH_OMAP4 only builds also. Fix this by making wakeup control generic so that it is executed whenever new feature flag has_wakeup in platform data is set. Currently flag is set for McBSP config types 3 and 4. Remove also old comments about idle mode settings and HW bug workarounds that were not updated during hwmod conversion. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Implement generic register accessJarkko Nikula
Register access can be made more generic by calculating register address offsets runtime from common register definitions and by using reg_size and reg_step variables that are passed via platform data. Common register definitions are possible since McBSP registers are ordered similarly between OMAP versions. Remove also references to OMAP2+ specific config_type variable from generic McBSP code since other variables and feature flags are better to carry needed information from platform code. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26ARM: OMAP: mcbsp: Move out omap_mcbsp_register_board_cfg from ↵Jarkko Nikula
plat-omap/devices.c Only OMAP1s are using omap_mcbsp_register_board_cfg after OMAP2+ hwmod conversion so it can be moved to mach-omap1/mcbsp.c. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26vfs pathname lookup: Add LOOKUP_AUTOMOUNT flagLinus Torvalds
Since we've now turned around and made LOOKUP_FOLLOW *not* force an automount, we want to add the ability to force an automount event on lookup even if we don't happen to have one of the other flags that force it implicitly (LOOKUP_OPEN, LOOKUP_DIRECTORY, LOOKUP_PARENT..) Most cases will never want to use this, since you'd normally want to delay automounting as long as possible, which usually implies LOOKUP_OPEN (when we open a file or directory, we really cannot avoid the automount any more). But Trond argued sufficiently forcefully that at a minimum bind mounting a file and quotactl will want to force the automount lookup. Some other cases (like nfs_follow_remote_path()) could use it too, although LOOKUP_DIRECTORY would work there as well. This commit just adds the flag and logic, no users yet, though. It also doesn't actually touch the LOOKUP_NO_AUTOMOUNT flag that is related, and was made irrelevant by the same change that made us not follow on LOOKUP_FOLLOW. Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ian Kent <raven@themaw.net> Cc: Jeff Layton <jlayton@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26ARM: OMAP: mcbsp: Remove unused variables from platform dataJarkko Nikula
These variables got unused after McBSP was converted to use resource structures. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-09-26Merge branch 'samsung-fixes-3' of git://github.com/kgene/linux-samsungLinus Torvalds
* 'samsung-fixes-3' of git://github.com/kgene/linux-samsung: ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driver ARM: S5PV210: Rename sclk_cam clocks for FIMC media driver ARM: S5P: fix incorrect loop iterator usage on gpio-interrupt ARM: S3C2443: Fix bit-reset in setrate of clk_armdiv
2011-09-27ARM: EXYNOS4: Rename sclk_cam clocks for FIMC driverSylwester Nawrocki
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-27ARM: S5PV210: Rename sclk_cam clocks for FIMC media driverSylwester Nawrocki
The sclk_cam clocks are now controlled by the top level FIMC media device driver bound to "s5p-fimc-md" platform device. Rename sclk_cam clocks so they accessible by the corresponding driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-26Merge branch 'hwmon-for-linus' of git://github.com/groeck/linuxLinus Torvalds
* 'hwmon-for-linus' of git://github.com/groeck/linux: hwmon: (coretemp) remove struct platform_data * parameter from create_core_data() hwmon: (coretemp) constify static data hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID hwmon: (ds620) Fix handling of negative temperatures hwmon: (w83791d) rename prototype parameter from 'register' to 'reg' hwmon: (coretemp) Don't use threshold registers for tempX_max hwmon: (coretemp) Let the user force TjMax hwmon: (coretemp) Drop duplicate function get_pkg_tjmax
2011-09-26Merge branch 'kvm-updates/3.1' of git://github.com/avikivity/kvmLinus Torvalds
* 'kvm-updates/3.1' of git://github.com/avikivity/kvm: KVM: x86 emulator: fix Src2CL decode KVM: MMU: fix incorrect return of spte
2011-09-26Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_op ARM: dma-mapping: free allocated page if unable to map ARM: fix vmlinux.lds.S discarding sections ARM: nommu: fix warning with checksyscalls.sh ARM: 7091/1: errata: D-cache line maintenance operation by MVA may not succeed
2011-09-26PM / Clocks: Do not acquire a mutex under a spinlockRafael J. Wysocki
Commit b7ab83e (PM: Use spinlock instead of mutex in clock management functions) introduced a regression causing clocks_mutex to be acquired under a spinlock. This happens because pm_clk_suspend() and pm_clk_resume() call pm_clk_acquire() under pcd->lock, but pm_clk_acquire() executes clk_get() which causes clocks_mutex to be acquired. Similarly, __pm_clk_remove(), executed under pcd->lock, calls clk_put(), which also causes clocks_mutex to be acquired. To fix those problems make pm_clk_add() call pm_clk_acquire(), so that pm_clk_suspend() and pm_clk_resume() don't have to do that. Change pm_clk_remove() and pm_clk_destroy() to separate modifications of the pcd->clock_list list from the actual removal of PM clock entry objects done by __pm_clk_remove(). Reported-and-tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-26ALSA: usb-audio: Check for possible chip NULL pointer before clearing ↵Thomas Pfaff
probing flag Before clearing the probing flag in the error exit path, check that the chip pointer is not NULL. Signed-off-by: Thomas Pfaff <tpfaff@gmx.net> Cc: <stable@kernel.org> [2.6.39+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-26ALSA: hda/realtek - Don't detect LO jack when identical with HPTakashi Iwai
The spec->autocfg.line_out_pins[] may contain the same pins as hp_pins[] depending on the configuration. When they are identical, detecting the line_jack_present flag screws up the auto-mute because alc_line_automute() is called unconditionally at initialization while it won't be triggered by unsol events, thus the old line_jack_present flag is kept for the whole run. For fixing this buggy behavior, the driver needs to check whether the line-outs are really individual, and skip if same as headphone jacks. Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-26ARM: 7099/1: futex: preserve oldval in SMP __futex_atomic_opWill Deacon
The SMP implementation of __futex_atomic_op clobbers oldval with the status flag from the exclusive store. This causes it to always read as zero when performing the FUTEX_OP_CMP_* operation. This patch updates the ARM __futex_atomic_op implementations to take a tmp argument, allowing us to store the strex status flag without overwriting the register containing oldval. Cc: stable@kernel.org Reported-by: Minho Ban <mhban@samsung.com> Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-26ALSA: hda/realtek - Avoid bogus HP-pin assignmentTakashi Iwai
When the headphone pin is assigned as primary output to line_out_pins[], the automatic HP-pin assignment by ASSID must be suppressed. Otherwise a wrong pin might be assigned to the headphone and breaks the auto-mute. Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2011-09-26ARM: dma-mapping: free allocated page if unable to mapRussell King
If the attempt to map a page for DMA fails (eg, because we're out of mapping space) then we must not hold on to the page we allocated for DMA - doing so will result in a memory leak. Cc: <stable@kernel.org> Reported-by: Bryan Phillippe <bp@darkforest.org> Tested-by: Bryan Phillippe <bp@darkforest.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-26ARM: S5P: fix incorrect loop iterator usage on gpio-interruptMarek Szyprowski
Loop iterator value after terminating list_for_each_entry() is not NULL. This patch fixes incorrect iterator usage in GPIO interrupt code for SAMSUNG S5P platforms. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-26ARM: S3C2443: Fix bit-reset in setrate of clk_armdivHeiko Stuebner
The changed statement should set the old armdiv bits to 0 and not everything else, before setting the new value. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-09-25ptrace: PTRACE_LISTEN forgets to unlock ->siglockOleg Nesterov
If PTRACE_LISTEN fails after lock_task_sighand() it doesn't drop ->siglock. Reported-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-25KVM: x86 emulator: fix Src2CL decodeAvi Kivity
Src2CL decode (used for double width shifts) erronously decodes only bit 3 of %rcx, instead of bits 7:0. Fix by decoding %cl in its entirety. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-09-25KVM: MMU: fix incorrect return of spteZhao Jin
__update_clear_spte_slow should return original spte while the current code returns low half of original spte combined with high half of new spte. Signed-off-by: Zhao Jin <cronozhj@gmail.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-09-24OMAP4: Fix the emif and dmm virtual mappingSantosh Shilimkar
Fix the address overlap with Emulation domain (EMU). The previous mapping was entering into EMU mapping and was not as per comments. Fix the mapping accordingly. Signed-off-by: Girish S G <girishsg@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-09-24OMAP: Print Initiator name for l3 custom error.sricharan
The initiator id gets logged in the l3 target registers for custom error. So print it to aid debugging. Based on a internal patch by Devaraj Rangasamy <dev@ti.com> Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-09-24OMAP: Fix sparse warnings in l3 error handler.sricharan
Fix below sparse warnings from the l3-noc and l3-smx error handlers files. arch/arm/mach-omap2/omap_l3_smx.h:209:22: warning: symbol 'omap3_l3_app_bases' was not declared. Should it be static? arch/arm/mach-omap2/omap_l3_smx.h:308:22: warning: symbol 'omap3_l3_debug_bases' was not declared. Should it be static? arch/arm/mach-omap2/omap_l3_smx.h:325:2: warning: incorrect type in initializer (different address spaces) arch/arm/mach-omap2/omap_l3_smx.h:325:2: expected unsigned int [usertype] * arch/arm/mach-omap2/omap_l3_smx.h:325:2: got unsigned int [noderef] [toplevel] <asn:2>*<noident> arch/arm/mach-omap2/omap_l3_smx.h:326:2: warning: incorrect type in initializer (different address spaces) arch/arm/mach-omap2/omap_l3_smx.h:326:2: expected unsigned int [usertype] * arch/arm/mach-omap2/omap_l3_smx.h:326:2: got unsigned int [noderef] [toplevel] <asn:2>*<noident> arch/arm/mach-omap2/omap_l3_smx.h:324:5: warning: symbol 'omap3_l3_bases' was not declared. Should it be static? CC arch/arm/mach-omap2/omap_l3_smx.o CHECK arch/arm/mach-omap2/omap_l3_noc.c arch/arm/mach-omap2/omap_l3_noc.c:73:13: warning: symbol '__v' shadows an earlier one arch/arm/mach-omap2/omap_l3_noc.c:73:13: originally declared here arch/arm/mach-omap2/omap_l3_noc.c:83:20: warning: symbol '__v' shadows an earlier one arch/arm/mach-omap2/omap_l3_noc.c:83:20: originally declared here arch/arm/mach-omap2/omap_l3_noc.c:90:5: warning: symbol '__v' shadows an earlier one arch/arm/mach-omap2/omap_l3_noc.c:90:5: originally declared here arch/arm/mach-omap2/omap_l3_noc.h:39:5: warning: symbol 'l3_flagmux' was not declared. Should it be static? arch/arm/mach-omap2/omap_l3_noc.h:46:5: warning: symbol 'l3_targ_inst_clk1' was not declared. Should it be static? arch/arm/mach-omap2/omap_l3_noc.h:54:5: warning: symbol 'l3_targ_inst_clk2' was not declared. Should it be static? arch/arm/mach-omap2/omap_l3_noc.h:75:5: warning: symbol 'l3_targ_inst_clk3' was not declared. Should it be static? arch/arm/mach-omap2/omap_l3_noc.h:79:6: warning: symbol 'l3_targ_inst_name' was not declared. Should it be static? arch/arm/mach-omap2/omap_l3_noc.h:112:5: warning: symbol 'l3_targ' was not declared. Should it be static? arch/arm/mach-omap2/omap_l3_noc.c:72:11: warning: cast removes address space of expression arch/arm/mach-omap2/omap_l3_noc.c:73:13: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap2/omap_l3_noc.c:73:13: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/omap_l3_noc.c:73:13: got unsigned int arch/arm/mach-omap2/omap_l3_noc.c:83:20: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap2/omap_l3_noc.c:83:20: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/omap_l3_noc.c:83:20: got unsigned int arch/arm/mach-omap2/omap_l3_noc.c:90:5: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap2/omap_l3_noc.c:90:5: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/omap_l3_noc.c:90:5: got unsigned int arch/arm/mach-omap2/omap_l3_noc.c:96:5: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap2/omap_l3_noc.c:96:5: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/omap_l3_noc.c:96:5: got unsigned int arch/arm/mach-omap2/omap_l3_noc.c:108:5: warning: incorrect type in argument 1 (different base types) arch/arm/mach-omap2/omap_l3_noc.c:108:5: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/omap_l3_noc.c:108:5: got unsigned int Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reported-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Paul Walmsley <paul@pwsan.com>
2011-09-24OMAP: Fix indentation issues in l3 error handler.sricharan
The indentation problems in the l3 noc and smx error handler files are fixed. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reported-by: Paul Walmsley <paul@pwsan.com>
2011-09-24OMAP: Fix a BUG in l3 error handler.Todd Poynor
With the current sequence of registering the irq and assigning it to the app_irq, debug_irq driver variables, there can be corner cases where the pending irq gets triggered immediately after registering, handler gets called resulting in a crash. So changed this sequence. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-09-24OMAP: Improve register access in L3 Error handler.Todd Poynor
* Changed the way of accessing L3 target registers from standard base rather than relative to STDERRLOG_MAIN. * Use ffs() to find error source from the L3_FLAGMUX_REGERRn register. * Remove extra l3_base[] entry. * Modified L3 custom error message. Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-09-24ALSA: HDA: No power nids on 92HD93David Henningsson
This patch is necessary to make internal speakers work on this chip. Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/854468 Tested-by: Alex Wolfson <alex.wolfson@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-23Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi: Fix WARN when removing spi-fsl-spi module spi/imx: Fix spi-imx when the hardware SPI chipselects are used
2011-09-23spi: Fix WARN when removing spi-fsl-spi moduleJeff Harris
If CPM mode is not used, the fsl_dummy_rx variable is never allocated. When the cleanup attempts to free it, the reference count is zero and a WARN is generated. The same CPM mode check used in the initialize is applied to the free as well. Tested on 2.6.33 with the previous spi_mpc8xxx driver. The renamed spi-fsl-spi driver looks to have the same problem. Signed-off-by: Jeff Harris <jeff_harris@kentrox.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-09-23scsi: fix qla2xxx printk format warningRandy Dunlap
sector_t can be different types, so cast it to its largest possible type. drivers/scsi/qla2xxx/qla_isr.c:1509:5: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'sector_t' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-23scsi: SCSI_ISCI needs to select SCSI_SAS_HOST_SMP, fixes build errorRandy Dunlap
SCSI_ISCI needs to select SCSI_SAS_HOST_SMP to ensure that all needed symbols are available to it. Fixes this build error: ERROR: "try_test_sas_gpio_gp_bit" [drivers/scsi/isci/isci.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-23Merge branch 'for_3.2/voltage-cleanup' of ↵Tony Lindgren
git://gitorious.org/khilman/linux-omap-pm into voltage
2011-09-23Merge branch 'perf-tools-for-linus' of git://github.com/acmel/linuxLinus Torvalds
* 'perf-tools-for-linus' of git://github.com/acmel/linux: perf python: Add missing perf_event__parse_sample 'swapped' parm
2011-09-23Merge branch 'perf-tools-for-linus' of git://github.com/acmel/linuxLinus Torvalds
* 'perf-tools-for-linus' of git://github.com/acmel/linux: perf tools: Add support for disabling -Werror via WERROR=0 perf top: Fix userspace sample addr map offset perf symbols: Fix issue with binaries using 16-bytes buildids (v2) perf tool: Fix endianness handling of u32 data in samples perf sort: Fix symbol sort output by separating unresolved samples by type perf symbols: Synthesize anonymous mmap events perf record: Create events initially disabled and enable after init perf symbols: Add some heuristics for choosing the best duplicate symbol perf symbols: Preserve symbol scope when parsing /proc/kallsyms perf symbols: /proc/kallsyms does not sort module symbols perf symbols: Fix ppc64 SEGV in dso__load_sym with debuginfo files perf probe: Fix regression of variable finder
2011-09-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix DDIA enable on some rs690 systems Revert "drm/radeon/kms: fix typo in r100_blit_copy"
2011-09-23Merge branch 'for-linus' of git://github.com/tiwai/soundLinus Torvalds
* 'for-linus' of git://github.com/tiwai/sound: ALSA: usb-audio - clear chip->probing on error exit ALSA: fm801: Gracefully handle failure of tuner auto-detect ALSA: fm801: Fix double free in case of error in tuner detection ASoC: Ensure we generate a driver name ASoC: Remove bitrotted wm8962_resume() ASoC: bf5xx-ad73311: Fix prototype for bf5xx_probe
2011-09-23perf python: Add missing perf_event__parse_sample 'swapped' parmArnaldo Carvalho de Melo
Problem introduced in 936be50, that missed one perf_event__parse_sample user, the python binding. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ja4phms9618ggi657plyuch2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23hwmon: (coretemp) remove struct platform_data * parameter from ↵Jan Beulich
create_core_data() The only caller of the function obtained the pointer solely for the purpose of passing it to this function, while it can be easily determined from the struct platform_device * parameter also passed. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-09-23hwmon: (coretemp) constify static dataJan Beulich
These arrays won't ever be written to, so protect them from unintentional modification. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-09-23hwmon: (coretemp) don't use kernel assigned CPU number as platform device IDJan Beulich
... as that has the potential to conflict with (particularly soft) CPU hot removal and re-adding. Signed-off-by: Jan Beulich <jbeulich@suse.com> [guenter.roeck@ericsson.com: use platform device ID as physical CPU id] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-09-23perf tools: Add support for disabling -Werror via WERROR=0Darren Hart
GCC often introduces new warnings with lots of false positives - breaking -Werror builds. WERROR=0 allows one to build perf without much fuss - while still encouraging people to send patches to avoid the fuss of having to type WERROR=0. Bisecting back to commits that produce a (mostly harmless) warning on some compilers is more difficult. With WERROR=0 one could bisect without worrying about harmless warnings. Cc: Ingo Molnar <mingo@elte.hu> Link: http://lkml.kernel.org/r/eac06c7cc4920e5d4830417d466161fb26c7359c.1315514559.git.dvhart@linux.intel.com Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf top: Fix userspace sample addr map offsetArnaldo Carvalho de Melo
The 'perf top' tool came from the kernel where we had each DSO (vmlinux, modules) loaded just once at a time. But userspace may have DSOs loaded in multiple addresses (shared libraries), requiring that we use the just resolved map instead of the first one found. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ag53wz0yllpgers0n2w7hchp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf symbols: Fix issue with binaries using 16-bytes buildids (v2)Stephane Eranian
Buildid can vary in size. According to the man page of ld, buildid can be 160 bits (sha1) or 128 bits (md5, uuid). Perf assumes buildid size of 20 bytes (160 bits) regardless. When dealing with md5 buildids, it would thus read more than needed and that would cause mismatches and samples without symbols. This patch fixes this by taking into account the actual buildid size as encoded int he section header. The leftover bytes are also cleared. This second version fixes a minor issue with the memset() base position. Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@gmail.com> Link: http://lkml.kernel.org/r/4cc1af3c.8ee7d80a.5a28.ffff868e@mx.google.com Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf tool: Fix endianness handling of u32 data in samplesDavid Ahern
Currently, analyzing PPC data files on x86 the cpu field is always 0 and the tid and pid are backwards. For example, analyzing a PPC file on PPC the pid/tid fields show: rsyslogd 1210/1212 and analyzing the same PPC file using an x86 perf binary shows: rsyslogd 1212/1210 The problem is that the swap_op method for samples is perf_event__all64_swap which assumes all elements in the sample_data struct are u64s. cpu, tid and pid are u32s and need to be handled individually. Given that the swap is done before the sample is parsed, the simplest solution is to undo the 64-bit swap of those elements when the sample is parsed and do the proper swap. The RAW data field is generic and perf cannot have programmatic knowledge of how to treat that data. Instead a warning is given to the user. Thanks to Anton Blanchard for providing a data file for a mult-CPU PPC system so I could verify the fix for the CPU fields. v3 -> v4: - fixed use of WARN_ONCE v2 -> v3: - used WARN_ONCE for message regarding raw data - removed struct wrapper around union - fixed whitespace issues v1 -> v2: - added a union for undoing the byte-swap on u64 and redoing swap on u32's to address compiler errors (see git commit 65014ab3) Cc: Anton Blanchard <anton@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1315321946-16993-1-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf sort: Fix symbol sort output by separating unresolved samples by typeAnton Blanchard
I took a profile that suggested 60% of total CPU time was in the hypervisor: ... 60.20% [H] 0x33d43c 4.43% [k] ._spin_lock_irqsave 1.07% [k] ._spin_lock Using perf stat to get the user/kernel/hypervisor breakdown contradicted this. The problem is we merge all unresolved samples into the one unknown bucket. If add a comparison by sample type to sort__sym_cmp we get the real picture: ... 57.11% [.] 0x80fbf63c 4.43% [k] ._spin_lock_irqsave 1.07% [k] ._spin_lock 0.65% [H] 0x33d43c So it was almost all userspace, not hypervisor as the initial profile suggested. I found another issue while adding this. Symbol sorting sometimes shows multiple entries for the unknown bucket: ... 16.65% [.] 0x6cd3a8 7.25% [.] 0x422460 5.37% [.] yylex 4.79% [.] malloc 4.78% [.] _int_malloc 4.03% [.] _int_free 3.95% [.] hash_source_code_string 2.82% [.] 0x532908 2.64% [.] 0x36b538 0.94% [H] 0x8000000000e132a4 0.82% [H] 0x800000000000e8b0 This happens because we aren't consistent with our sorting. On one hand we check to see if both symbols match and for two unresolved samples sym is NULL so we match: if (left->ms.sym == right->ms.sym) return 0; On the other hand we use sample IP for unresolved samples when comparing against a symbol: ip_l = left->ms.sym ? left->ms.sym->start : left->ip; ip_r = right->ms.sym ? right->ms.sym->start : right->ip; This means unresolved samples end up spread across the rbtree and we can't merge them all. If we use cmp_null all unresolved samples will end up in the one bucket and the output makes more sense: ... 39.12% [.] 0x36b538 5.37% [.] yylex 4.79% [.] malloc 4.78% [.] _int_malloc 4.03% [.] _int_free 3.95% [.] hash_source_code_string 2.26% [H] 0x800000000000e8b0 Acked-by: Eric B Munson <emunson@mgebm.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ian Munsie <imunsie@au1.ibm.com> Link: http://lkml.kernel.org/r/20110831115145.4f598ab2@kryten Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-23perf symbols: Synthesize anonymous mmap eventsAnton Blanchard
perf_event__synthesize_mmap_events does not create anonymous mmap events even though the kernel does. As a result an already running application with dynamically created code will not get profiled - all samples end up in the unknown bucket. This patch skips any entries with '[' in the name to avoid adding events for special regions (eg the vsyscall page). All other executable mmaps are assumed to be anonymous and an event is synthesized. Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Eric B Munson <emunson@mgebm.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Link: http://lkml.kernel.org/r/20110830091506.60b51fe8@kryten Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 15:32:13 +0000