summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-27arm/xen: Add misuse warning to virt_to_gfnSimon Leiner
As virt_to_gfn uses virt_to_phys, it will return invalid addresses when used with vmalloc'd addresses. This patch introduces a warning, when virt_to_gfn is used in this way. Signed-off-by: Simon Leiner <simon@leiner.me> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-2-simon@leiner.me Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-27xen/xenbus: Fix granting of vmalloc'd memorySimon Leiner
On some architectures (like ARM), virt_to_gfn cannot be used for vmalloc'd memory because of its reliance on virt_to_phys. This patch introduces a check for vmalloc'd addresses and obtains the PFN using vmalloc_to_pfn in that case. Signed-off-by: Simon Leiner <simon@leiner.me> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.me Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-27XEN uses irqdesc::irq_data_common::handler_data to store a per interruptThomas Gleixner
XEN data pointer which contains XEN specific information. handler data is meant for interrupt handlers and not for storing irq chip specific information as some devices require handler data to store internal per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers. This obviously creates a conflict of interests and crashes the machine because the XEN pointer is overwritten by the driver pointer. As the XEN data is not handler specific it should be stored in irqdesc::irq_data::chip_data instead. A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that. Cc: stable@vger.kernel.org Reported-by: Roman Shaposhnik <roman@zededa.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Roman Shaposhnik <roman@zededa.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-27Merge tag 'amd-drm-fixes-5.9-2020-08-26' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-08-26: amdgpu: - Misc display fixes - Backlight fixes - MPO fix for DCN1 - Fixes for Sienna Cichlid - Fixes for Navy Flounder - Vega SW CTF fixes - SMU fix for Raven - Fix a possible overflow in INFO ioctl - Gfx10 clockgating fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826200801.17735-1-alexander.deucher@amd.com
2020-08-27Merge tag 'drm-msm-fixes-2020-08-24' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Some fixes for v5.9 plus the one opp/bandwidth scaling patch ("drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR") which was not included in the initial pull due to dependency on patch landing thru OPP tree Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGt45A4ObyhEdC5Ga4f4cAf-NBSVRECu7df3Gh6-X4G3tQ@mail.gmail.com
2020-08-27Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie
into drm-fixes Two fixes: One fixes a bad interaction with the DRM scheduler, leading to some dma fences not getting signalled after hitting the job timeout. The other one fixes a GPU init regression, as apparently one old core doesn't likes us reading some of the identification registers. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/aceebfe3af636346f5252bdf727cdd988bdcbdf2.camel@pengutronix.de
2020-08-27Merge tag 'exynos-drm-fixes-v5.9-rc3' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes One fixup - Just drop __iommu annotation to fix sparse warning. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <daeinki@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826071520.3140-1-daeinki@gmail.com
2020-08-26io_uring: clear req->result on IOPOLL re-issueJens Axboe
Make sure we clear req->result, which was set to -EAGAIN for retry purposes, when moving it to the reissue list. Otherwise we can end up retrying a request more than once, which leads to weird results in the io-wq handling (and other spots). Cc: stable@vger.kernel.org Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-26drm/amd/display: Fix memleak in amdgpu_dm_mode_config_initDinghao Liu
When amdgpu_display_modeset_create_props() fails, state and state->context should be freed to prevent memleak. It's the same when amdgpu_dm_audio_init() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu: disable runtime pm for navy_flounderJiansong Chen
Disable runtime pm for navy_flounder temporarily. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Retry AUX write when fail occursWayne Lin
[Why] In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We suppose every write wil get done successfully and hence some AUX commands might not sent out indeed. [How] Check if AUX_WR success. If not, retry it. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu: Fix buffer overflow in INFO ioctlAlex Deucher
The values for "se_num" and "sh_num" come from the user in the ioctl. They can be in the 0-255 range but if they're more than AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in an out of bounds read. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/powerplay: Fix hardmins not being sent to SMU for RVNicholas Kazlauskas
[Why] DC uses these to raise the voltage as needed for higher dispclk/dppclk and to ensure that we have enough bandwidth to drive the displays. There's a bug preventing these from actuially sending messages since it's checking the actual clock (which is 0) instead of the incoming clock (which shouldn't be 0) when deciding to send the hardmin. [How] Check the clocks != 0 instead of the actual clocks. Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amdgpu: use MODE1 reset for navy_flounder by defaultJiansong Chen
Switch default gpu reset method to MODE1 for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/pm: correct the thermal alert temperature limit settingsEvan Quan
Do the maths in celsius degree. This can fix the issues caused by the changes below: drm/amd/pm: correct Vega20 swctf limit setting drm/amd/pm: correct Vega12 swctf limit setting drm/amd/pm: correct Vega10 swctf limit setting Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amdgpu: add asd fw check before loading asdTao Zhou
asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Keep current gain when ABM disable immediatelyBrandon Syu
[Why] When system enters s3/s0i3, backlight PWM would set user level. [How] ABM disable function add keep current gain to avoid it. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulationSamson Tam
[Why] dongle_type is set during dongle connection but for passive dongles, dongle_type is not set. If user starts with an active dongle and then switches to a passive dongle, it will still report as an active dongle. Trying to emulate the wrong connecter type results in display not lighting up. [How] Set dpcd_caps.dongle_type for passive dongles in detect_dp(). Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Revert HDCP disable sequence changeJaehyun Chung
[Why] Revert HDCP disable sequence change that blanks stream before disabling HDCP. PSP and HW teams are currently investigating the root cause of why HDCP cannot be disabled before stream blank, which is expected to work without issues. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Send DISPLAY_OFF after power down on bootSung Lee
[WHY] update_clocks might not be called on headless adapters. This means DISPLAY_OFF may not be sent in headless cases. [HOW] If hardware is powered down on boot because it is headless (mode set does not happen on that adapter) also send DISPLAY_OFF notification. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu/gfx10: refine mgcg settingJiansong Chen
1. enable ENABLE_CGTS_LEGACY to fix specviewperf11 random hang. 2. remove obsolete RLC_CGTT_SCLK_OVERRIDE workaround. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/pm: correct Vega20 swctf limit settingEvan Quan
Correct the Vega20 thermal swctf limit. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/pm: correct Vega12 swctf limit settingEvan Quan
Correct the Vega12 thermal swctf limit. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/pm: correct Vega10 swctf limit settingEvan Quan
Correct the Vega10 thermal swctf limit. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267 Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/pm: set VCN pg per instancesJiansong Chen
When deciding whether to set pg for vcn1, instances number is more generic than chip name. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/pm: enable run_btc callback for sienna_cichlidJiansong Chen
DC BTC support for sienna_cichlid is added, it provides the DC tolerance and aging measurements. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in ↵Furquan Shaikh
amdgpu_dm_update_backlight_caps In `amdgpu_dm_update_backlight_caps()`, there is a local `amdgpu_dm_backlight_caps` object that is filled in by `amdgpu_acpi_get_backlight_caps()`. However, this object is uninitialized before the call and hence the subsequent check for aux_support can fail since it is not initialized by `amdgpu_acpi_get_backlight_caps()` as well. This change initializes this local `amdgpu_dm_backlight_caps` object to 0. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Reject overlay plane configurations in multi-display scenariosNicholas Kazlauskas
[Why] These aren't stable on some platform configurations when driving multiple displays, especially on higher resolution. In particular the delay in asserting p-state and validating from x86 outweights any power or performance benefit from the hardware composition. Under some configurations this will manifest itself as extreme stutter or unresponsiveness especially when combined with cursor movement. [How] Disable these for now. Exposing overlays to userspace doesn't guarantee that they'll be able to use them in any and all configurations and it's part of the DRM contract to have userspace gracefully handle validation failures when they occur. Valdiation occurs as part of DC and this in particular affects RV, so disable this in dcn10_global_validation. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: use correct scale for actual_brightnessAlexander Monakov
Documentation for sysfs backlight level interface requires that values in both 'brightness' and 'actual_brightness' files are interpreted to be in range from 0 to the value given in the 'max_brightness' file. With amdgpu, max_brightness gives 255, and values written by the user into 'brightness' are internally rescaled to a wider range. However, reading from 'actual_brightness' gives the raw register value without inverse rescaling. This causes issues for various userspace tools such as PowerTop and systemd that expect the value to be in the correct range. Introduce a helper to retrieve internal backlight range. Use it to reimplement 'convert_brightness' as 'convert_brightness_from_user' and introduce 'convert_brightness_to_user'. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=203905 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1242 Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/display: should check error using DC_OKTong Zhang
core_link_read_dpcd returns only DC_OK(1) and DC_ERROR_UNEXPECTED(-1), the caller should check error using DC_OK instead of checking against 0 Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26iio: dpot-dac: fix code comment in dpot_dac_read_raw()Gustavo A. R. Silva
After the replacement of the /* fall through */ comment with the fallthrough pseudo-keyword macro, the natural reading of a code comment was broken. Fix the natural reading of such a comment and make it intelligible. Reported-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-26Merge tag 'tty-5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are a few small TTY/Serial/vt fixes for 5.9-rc3 Included in here are: - qcom serial fixes - vt ioctl and core bugfixes - pl011 serial driver fixes - 8250 serial driver fixes - other misc serial driver fixes and for good measure: - fbcon fix for syzbot found problem. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: imx: add dependence and build for earlycon serial: samsung: Removes the IRQ not found warning serial: 8250: change lock order in serial8250_do_startup() serial: stm32: avoid kernel warning on absence of optional IRQ serial: pl011: Fix oops on -EPROBE_DEFER serial: pl011: Don't leak amba_ports entry on driver register error serial: 8250_exar: Fix number of ports for Commtech PCIe cards tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup serial: qcom_geni_serial: Fix recent kdb hang vt_ioctl: change VT_RESIZEX ioctl to check for error return from vc_resize() fbcon: prevent user font height or width change from causing potential out-of-bounds access vt: defer kfree() of vc_screenbuf in vc_do_resize()
2020-08-26Merge tag 'char-misc-5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc and other driver subsystem fixes for 5.9-rc3. The majority of these are tiny habanalabs driver fixes, but also in here are: - speakup build fixes now that it is out of staging and got exposed to more build systems all of a sudden - mei driver fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: correctly report inbound pci region cfg error habanalabs: check correct vmalloc return code habanalabs: validate FW file size habanalabs: fix incorrect check on failed workqueue create habanalabs: set max power according to card type habanalabs: proper handling of alloc size in coresight habanalabs: set clock gating according to mask habanalabs: verify user input in cs_ioctl_signal_wait habanalabs: Fix a loop in gaudi_extract_ecc_info() habanalabs: Fix memory corruption in debugfs habanalabs: validate packet id during CB parse habanalabs: Validate user address before mapping habanalabs: unmap PCI bars upon iATU failure mei: hdcp: fix mei_hdcp_verify_mprime() input parameter speakup: only build serialio when ISA is enabled speakup: Fix wait_for_xmitr for ttyio case
2020-08-26Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: "Two patches from Vineeth to improve Hyper-V timesync facility" * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv_utils: drain the timesync packets on onchannelcallback hv_utils: return error if host timesysnc update is stale
2020-08-26Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio bugfixes from Michael Tsirkin: "A couple vdpa and vhost bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Avoid warnings about shifts on 32-bit platforms vhost-iotlb: fix vhost_iotlb_itree_next() documentation vdpa: ifcvf: free config irq in ifcvf_free_irq() vdpa: ifcvf: return err when fail to request config irq
2020-08-26io_uring: make offset == -1 consistent with preadv2/pwritev2Jens Axboe
The man page for io_uring generally claims were consistent with what preadv2 and pwritev2 accept, but turns out there's a slight discrepancy in how offset == -1 is handled for pipes/streams. preadv doesn't allow it, but preadv2 does. This currently causes io_uring to return -EINVAL if that is attempted, but we should allow that as documented. This change makes us consistent with preadv2/pwritev2 for just passing in a NULL ppos for streams if the offset is -1. Cc: stable@vger.kernel.org # v5.7+ Reported-by: Benedikt Ames <wisp3rwind@posteo.eu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-26MAINTAINERS: Add entry for HPE Superdome Flex (UV) maintainersSteve Wahl
Add an entry and email addresses for people at HPE who are supporting Linux on the Superdome Flex (a.k.a) UV platform. [ bp: Capitalize "linux" too :) ] Signed-off-by: Steve Wahl <steve.wahl@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200824221439.GA52810@swahl-home.5wahls.com
2020-08-26s390/vmem: fix vmem_add_range for 4-level pagingVasily Gorbik
The kernel currently crashes if 4-level paging is used. Add missing p4d_populate for just allocated pud entry. Fixes: 3e0d3e408e63 ("s390/vmem: consolidate vmem_add_range() and vmem_remove_range()") Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-08-26s390: don't trace preemption in percpu macrosSven Schnelle
Since commit a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables") the lockdep code itself uses percpu variables. This leads to recursions because the percpu macros are calling preempt_enable() which might call trace_preempt_on(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-08-26loop: Set correct device size when using LOOP_CONFIGUREMartijn Coenen
The device size calculation was done before processing the loop configuration, which meant that the we set the size on the underlying block device incorrectly in case lo_offset/lo_sizelimit were set in the configuration. Delay computing the size until we've setup the device parameters correctly. Fixes: 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl") Reported-by: Lennart Poettering <mzxreary@0pointer.de> Tested-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> Signed-off-by: Martijn Coenen <maco@android.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-26nbd: restore default timeout when setting it to zeroHou Pu
If we configured io timeout of nbd0 to 100s. Later after we finished using it, we configured nbd0 again and set the io timeout to 0. We expect it would timeout after 30 seconds and keep retry. But in fact we could not change the timeout when we set it to 0. the timeout is still the original 100s. So change the timeout to default 30s when we set it to zero. It also behaves same as commit 2da22da57348 ("nbd: fix zero cmd timeout handling v2"). It becomes more important if we were reconfigure a nbd device and the io timeout it set to zero. Because it could take 30s to detect the new socket and thus io could be completed more quickly compared to 100s. Signed-off-by: Hou Pu <houpu@bytedance.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-26vdpa/mlx5: Avoid warnings about shifts on 32-bit platformsNathan Chancellor
Clang warns several times when building for 32-bit ARM along the lines of: drivers/vdpa/mlx5/net/mlx5_vnet.c:1462:31: warning: shift count >= width of type [-Wshift-count-overflow] ndev->mvdev.mlx_features |= BIT(VIRTIO_F_VERSION_1); ^~~~~~~~~~~~~~~~~~~~~~~ This is related to the BIT macro, which uses an unsigned long literal, which is 32-bit on ARM so having a shift equal to or larger than 32 will cause this warning, such as the above, where VIRTIO_F_VERSION_1 is 32. To avoid this, use BIT_ULL, which will be an unsigned long long. This matches the size of the features field throughout this driver, which is u64 so there should be no functional change. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Link: https://github.com/ClangBuiltLinux/linux/issues/1140 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200821225018.940798-1-natechancellor@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Acked-by: Eli Cohen <elic@nvidia.com>
2020-08-26vhost-iotlb: fix vhost_iotlb_itree_next() documentationStefano Garzarella
This patch contains trivial changes for the vhost_iotlb_itree_next() documentation, fixing the function name and the description of first argument (@map). Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20200825130543.43308-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-26vdpa: ifcvf: free config irq in ifcvf_free_irq()Jason Wang
We don't free config irq in ifcvf_free_irq() which will trigger a BUG() in pci core since we try to free the vectors that has an action. Fixing this by recording the config irq in ifcvf_hw structure and free it in ifcvf_free_irq(). Fixes: e7991f376a4d ("ifcvf: implement config interrupt in IFCVF") Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200723091254.20617-2-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Zhu Lingshan <lingshan.zhu@intel.com> Fixes: e7991f376a4d ("ifcvf: implement config interrupt in IFCVF") Cc: Zhu Lingshan <a class="moz-txt-link-rfc2396E" href="mailto:lingshan.zhu@intel.com">&lt;lingshan.zhu@intel.com&gt;</a> Signed-off-by: Jason Wang <a class="moz-txt-link-rfc2396E" href="mailto:jasowang@redhat.com">&lt;jasowang@redhat.com&gt;</a>
2020-08-26vdpa: ifcvf: return err when fail to request config irqJason Wang
We ignore the err of requesting config interrupt, fix this. Fixes: e7991f376a4d ("ifcvf: implement config interrupt in IFCVF") Cc: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200723091254.20617-1-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Zhu Lingshan <lingshan.zhu@intel.com> Fixes: e7991f376a4d ("ifcvf: implement config interrupt in IFCVF") Cc: Zhu Lingshan <a class="moz-txt-link-rfc2396E" href="mailto:lingshan.zhu@intel.com">&lt;lingshan.zhu@intel.com&gt;</a> Signed-off-by: Jason Wang <a class="moz-txt-link-rfc2396E" href="mailto:jasowang@redhat.com">&lt;jasowang@redhat.com&gt;</a> Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2020-08-26lockdep,trace: Expose tracepointsPeter Zijlstra
The lockdep tracepoints are under the lockdep recursion counter, this has a bunch of nasty side effects: - TRACE_IRQFLAGS doesn't work across the entire tracepoint - RCU-lockdep doesn't see the tracepoints either, hiding numerous "suspicious RCU usage" warnings. Pull the trace_lock_*() tracepoints completely out from under the lockdep recursion handling and completely rely on the trace level recusion handling -- also, tracing *SHOULD* not be taking locks in any case. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Marco Elver <elver@google.com> Link: https://lkml.kernel.org/r/20200821085348.782688941@infradead.org
2020-08-26lockdep: Only trace IRQ edgesNicholas Piggin
Problem: raw_local_irq_save(); // software state on local_irq_save(); // software state off ... local_irq_restore(); // software state still off, because we don't enable IRQs raw_local_irq_restore(); // software state still off, *whoopsie* existing instances: - lock_acquire() raw_local_irq_save() __lock_acquire() arch_spin_lock(&graph_lock) pv_wait() := kvm_wait() (same or worse for Xen/HyperV) local_irq_save() - trace_clock_global() raw_local_irq_save() arch_spin_lock() pv_wait() := kvm_wait() local_irq_save() - apic_retrigger_irq() raw_local_irq_save() apic->send_IPI() := default_send_IPI_single_phys() local_irq_save() Possible solutions: A) make it work by enabling the tracing inside raw_*() B) make it work by keeping tracing disabled inside raw_*() C) call it broken and clean it up now Now, given that the only reason to use the raw_* variant is because you don't want tracing. Therefore A) seems like a weird option (although it can be done). C) is tempting, but OTOH it ends up converting a _lot_ of code to raw just because there is one raw user, this strips the validation/tracing off for all the other users. So we pick B) and declare any code that ends up doing: raw_local_irq_save() local_irq_save() lockdep_assert_irqs_disabled(); broken. AFAICT this problem has existed forever, the only reason it came up is because commit: 859d069ee1dd ("lockdep: Prepare for NMI IRQ state tracking") changed IRQ tracing vs lockdep recursion and the first instance is fairly common, the other cases hardly ever happen. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [rewrote changelog] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Marco Elver <elver@google.com> Link: https://lkml.kernel.org/r/20200723105615.1268126-1-npiggin@gmail.com
2020-08-26mips: Implement arch_irqs_disabled()Peter Zijlstra
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200826101653.GE1362448@hirez.programming.kicks-ass.net
2020-08-26arm64: Implement arch_irqs_disabled()Peter Zijlstra
Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/20200821085348.664425120@infradead.org
2020-08-26nds32: Implement arch_irqs_disabled()Peter Zijlstra
Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Marco Elver <elver@google.com> Link: https://lkml.kernel.org/r/20200821085348.604899379@infradead.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-24 07:20:23 +0000