summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-11net: phy: dp83848: Add PHY ID for TI version of DP83848CAndrew F. Davis
After acquiring National Semiconductor, TI appears to have changed the Vendor Model Number for the DP83848C PHYs, add this new ID to supported IDs. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: phy: dp83848: Add macro for dp83848 compatible devicesAndrew F. Davis
Add a helper macro for defining dp83848 compatible phy devices. Update copyright info. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11be2net: don't report EVB for older chipsets when SR-IOV is disabledIvan Vecera
The EVB (virtual bridge) functionality should be disabled on older BE3 and Lancer chips if SR-IOV is disabled in the NIC's BIOS. This setting is identified by the zero value of total VFs reported by the card. The GET_HSW_CONFIG command cannot be used as it is not supported by these older chipset's FW. v2: added the comment Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11Merge branch 'spi_ks8995'David S. Miller
Helmut Buchsbaum says: ==================== Add support for MICREL KSZ8795CLX 5-port switch This patch series refactors the spi-ks8995 driver to finally add support for the MICREL KSZ8795CLX. Additionally support for controlling a GPIO line for resetting the switch is added. Helmut Changes since v2: - use GPIO_ACTIVE_LOW according to Andrew's remark. - use ePAPR compliant node name in example, thanks to Sergei for pointing out Changes since v1: - removed initializing registers from Device Tree following Florian's advice - fixed GPIO handling for reset according to Andrew's remark. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11dt-bindings: net: ks8995: add bindings documentation for ks8995Helmut Buchsbaum
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: phy: spi_ks8995: add support for MICREL KSZ8795CLXHelmut Buchsbaum
Add support for MICREL KSZ8795CLX Integrated 5-Port, 10-/100-Managed Ethernet Switch with Gigabit GMII/RGMII and MII/RMII interfaces. Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: phy: spi_ks8995: generalize creation of SPI commandsHelmut Buchsbaum
Prepare creating SPI reads and writes for other switch families. The KS8995 family uses the straight forward <8bit CMD><8bit ADDR> sequence. To be able to support KSZ8795 family, which uses <3bit CMD><12bit ADDR><1 bit TR> make the SPI command creation chip variant dependent. Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: phy: spi_ks8995: add support for resetting switch using GPIOHelmut Buchsbaum
When using device tree it is no more possible to reset the PHY at board level. Furthermore, doing in the driver allows to power down the switch when it is not used any more. The patch introduces a new optional property "reset-gpios" denoting an appropriate GPIO handle, e.g.: reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW> Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: phy: spi_ks8995: verify chip and determine revisionHelmut Buchsbaum
Since the chip variant is now determined by spi_device_id, verify family and chip id and determine the revision id. Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: phy: spi_ks8995: introduce spi_device_id tableHelmut Buchsbaum
Refactor to use spi_device_id table to facilitate easy extendability. Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11Merge branch 'thunderx-irq-hints'David S. Miller
Sunil Goutham says: ==================== net: thunderx: Setting IRQ affinity hints and other optimizations This patch series contains changes - To add support for virtual function's irq affinity hint - Replace napi_schedule() with napi_schedule_irqoff() - Reduce page allocation overhead by allocating pages of higher order when pagesize is 4KB. - Add couple of stats which helps in debugging - Some miscellaneous changes to BGX driver. Changes from v1: - As suggested changed MAC address invalid log message to dev_err() instead of dev_warn(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: thunderx: Alloc higher order pages when pagesize is smallSunil Goutham
Allocate higher order pages when pagesize is small, this will reduce number of calls to page allocator and wastage of memory. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: thunderx: bgx: Add log message when setting mac addressRobert Richter
Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: thunderx: bgx: Use standard firmware node infrastructure.David Daney
In the case of OF device tree, the firmware information is attached to the BGX device structure in the standard manner, so use the firmware iterators and accessors where possible. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: thunderx: Assign affinity hints to vf's interruptsSunil Goutham
This affinity hint can be used by user space irqbalance tool to set preferred CPU mask for irqs registered by this VF. Irqbalance needs to be in 'exact' mode to set irq affinity same as indicated by affinity hint. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: thunderx: Use napi_schedule_irqoff()Sunil Goutham
napi_schedule is being called from hard irq context, hence switch to napi_schedule_irqoff which avoids unneeded call to local_irq_save and local_irq_restore. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net, thunderx: Add TX timeout and RX buffer alloc failure stats.Thanneeru Srinivasulu
When system is low on atomic memory, too many error messages are logged. Since this is not a total failure but a simple switch to non-atomic allocation better to have a stat. Also add a stat for reset, kicked due to transmit watchdog timeout. Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11Merge branch 'igmp-ns'David S. Miller
Nikolay Borisov says: ==================== Make igmp sysctl knobs namespace aware This series continue making more of the net related sysctls namespace aware. The first 2 and last patches are straight forward and convert sysctls which weren't defined to be namespace aware. The only thing in them is that each removes a define which is used in only one place (to initialise the respective sysctl) so I don't think this is a huge loss. The third patch however, converts igmp_llm_reports which was already defined in the ipv4_net_table but wasn't using any of the net namespace infrastructure. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11igmp: Namespacify igmp_qrv sysctl knobNikolay Borisov
Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11igmp: Namespaceify igmp_llm_reports sysctl knobNikolay Borisov
This was initially introduced in df2cf4a78e488d26 ("IGMP: Inhibit reports for local multicast groups") by defining the sysctl in the ipv4_net_table array, however it was never implemented to be namespace aware. Fix this by changing the code accordingly. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11igmp: Namespaceify igmp_max_msf sysctl knobNikolay Borisov
Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11igmp: Namespaceify igmp_max_memberships sysctl knobNikolay Borisov
Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11bonding: use return instead of gotoZhang Shengju
Replace 'goto' with 'return' to remove unnecessary check at label: err_undo_flags. The reason is that 'err_undo_flags' do two things for the first slave device: 1.revert bond mac address if it is set by the slave device. 2.revert bond device type if it's not ARPHRD_ETHER. It's not necessary for the following three places, they changed neither bond mac address nor type. It's straightforward to return directly. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: macb: add wake-on-lan support via magic packetSergio Prado
Tested on Acqua A5 SoM (http://www.acmesystems.it/acqua). Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: hamradio: baycom_ser_fdx: Replace timeval with timespec64Amitoj Kaur Chawla
32 bit systems using 'struct timeval' will break in the year 2038, so we replace the code appropriately. However, this driver is not broken in 2038 since we are only using microseconds portion of the time. This patch replaces 'struct timeval' with 'struct timespec64'. We only need to find elapsed microseconds rather than absolute time, so it's better to use monotonic time, so using ktime_get_ts64() makes the code more efficient and more robust against concurrent settimeofday() calls. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thomas Sailer <t.sailer@alumni.ethz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11openvswitch: allow management from inside user namespacesTycho Andersen
Operations with the GENL_ADMIN_PERM flag fail permissions checks because this flag means we call netlink_capable, which uses the init user ns. Instead, let's introduce a new flag, GENL_UNS_ADMIN_PERM for operations which should be allowed inside a user namespace. The motivation for this is to be able to run openvswitch in unprivileged containers. I've tested this and it seems to work, but I really have no idea about the security consequences of this patch, so thoughts would be much appreciated. v2: use the GENL_UNS_ADMIN_PERM flag instead of a check in each function v3: use separate ifs for UNS_ADMIN_PERM and ADMIN_PERM, instead of one massive one Reported-by: James Page <james.page@canonical.com> Signed-off-by: Tycho Andersen <tycho.andersen@canonical.com> CC: Eric Biederman <ebiederm@xmission.com> CC: Pravin Shelar <pshelar@ovn.org> CC: Justin Pettit <jpettit@nicira.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11ethtool: future-proof interface for speed extensionsMichael S. Tsirkin
Many virtual and not quite virtual devices allow any speed to be set through ethtool. In particular, this applies to the virtio-net devices. Document this fact to make sure people don't assume the enum lists all possible values. Reserve values greater than INT_MAX for future extension and to avoid conflict with SPEED_UNKNOWN. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11vrf: duplicate include of rtnetlink.hstephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11vxlan: udp_tunnel duplicate include net/udp_tunnel.hstephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11rds: duplicate include net/tcp.hstephen hemminger
Duplicate include detected. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11bonding: Return correct error codeAmitoj Kaur Chawla
The return value of kzalloc on failure of allocation of memory should be -ENOMEM and not -1. Found using Coccinelle. A simplified version of the semantic patch used is: //<smpl> @@ expression *e; @@ e = kzalloc(...); if (e == NULL) { ... return - -1 + -ENOMEM ; } //</smpl> The single call site only checks that the return value is not 0, hence no change is required at the call site. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11Merge branch 'gso-checksums'David S. Miller
Alexander Duyck says: ==================== Add GSO support for outer checksum w/ inner checksum offloads This patch series updates the existing segmentation offload code for tunnels to make better use of existing and updated GSO checksum computation. This is done primarily through two mechanisms. First we maintain a separate checksum in the GSO context block of the sk_buff. This allows us to maintain two checksum values, one offloaded with values stored in csum_start and csum_offset, and one computed and tracked in SKB_GSO_CB(skb)->csum. By maintaining these two values we are able to take advantage of the same sort of math used in local checksum offload so that we can provide both inner and outer checksums with minimal overhead. Below is the performance for a netperf session between an ixgbe PF and VF on the same host but in different namespaces. As can be seen a significant gain in performance can be had from allowing the use of Tx checksum offload on the inner headers while performing a software offload on the outer header computation: Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB Before: 87380 16384 16384 10.00 12844.38 9.30 -1.00 0.712 -1.00 After: 87380 16384 16384 10.00 13216.63 6.78 -1.00 0.504 -1.000 Changes from v1: * Dropped use of CHECKSUM_UNNECESSARY for remote checksum offload * Left encap_hdr_csum as it will likely be needed in future for SCTP GSO * Broke the changes out over many more patches * Updated GRE segmentation to more closely match UDP tunnel segmentation ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: Allow tunnels to use inner checksum offloads with outer checksums neededAlexander Duyck
This patch enables us to use inner checksum offloads if provided by hardware with outer checksums computed by software. It basically reduces encap_hdr_csum to an advisory flag for now, but based on the fact that SCTP may be getting segmentation support before long I thought we may want to keep it as it is possible we may need to support CRC32c and 1's compliment checksum in the same packet at some point in the future. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11udp: Use uh->len instead of skb->len to compute checksum in segmentationAlexander Duyck
The segmentation code was having to do a bunch of work to pull the skb->len and strip the udp header offset before the value could be used to adjust the checksum. Instead of doing all this work we can just use the value that goes into uh->len since that is the correct value with the correct byte order that we need anyway. By using this value we can save ourselves a bunch of pain as there is no need to do multiple byte swaps. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11udp: Clean up the use of flags in UDP segmentation offloadAlexander Duyck
This patch goes though and cleans up the logic related to several of the control flags used in UDP segmentation. Specifically the use of dont_encap isn't really needed as we can just check the skb for CHECKSUM_PARTIAL and if it isn't set then we don't need to update the internal headers. As such we can just drop that value. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11gre: Use inner_proto to obtain inner header protocolAlexander Duyck
Instead of parsing headers to determine the inner protocol we can just pull the value from inner_proto. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11gre: Use GSO flags to determine csum need instead of GRE flagsAlexander Duyck
This patch updates the gre checksum path to follow something much closer to the UDP checksum path. By doing this we can avoid needing to do as much header inspection and can just make use of the fields we were already reading in the sk_buff structure. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: Move skb_has_shared_frag check out of GRE code and into segmentationAlexander Duyck
The call skb_has_shared_frag is used in the GRE path and skb_checksum_help to verify that no frags can be modified by an external entity. This check really doesn't belong in the GRE path but in the skb_segment function itself. This way any protocol that might be segmented will be performing this check before attempting to offload a checksum to software. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: Store checksum result for offloaded GSO checksumsAlexander Duyck
This patch makes it so that we can offload the checksums for a packet up to a certain point and then begin computing the checksums via software. Setting this up is fairly straight forward as all we need to do is reset the values stored in csum and csum_start for the GSO context block. One complication for this is remote checksum offload. In order to allow the inner checksums to be offloaded while computing the outer checksum manually we needed to have some way of indicating that the offload wasn't real. In order to do that I replaced CHECKSUM_PARTIAL with CHECKSUM_UNNECESSARY in the case of us computing checksums for the outer header while skipping computing checksums for the inner headers. We clean up the ip_summed flag and set it to either CHECKSUM_PARTIAL or CHECKSUM_NONE once we hand the packet off to the next lower level. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: Update remote checksum segmentation to support use of GSO checksumAlexander Duyck
This patch addresses two main issues. First in the case of remote checksum offload we were avoiding dealing with scatter-gather issues. As a result it would be possible to assemble a series of frames that used frags instead of being linearized as they should have if remote checksum offload was enabled. Second I have updated the code so that we now let GSO take care of doing the checksum on the data itself and drop the special case that was added for remote checksum offload. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: Move GSO csum into SKB_GSO_CBAlexander Duyck
This patch moves the checksum maintained by GSO out of skb->csum and into the GSO context block in order to allow for us to work on outer checksums while maintaining the inner checksum offsets in the case of the inner checksum being offloaded, while the outer checksums will be computed. While updating the code I also did a minor cleanu-up on gso_make_checksum. The change is mostly to make it so that we store the values and compute the checksum instead of computing the checksum and then storing the values we needed to update. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: Drop unecessary enc_features variable from tunnel segmentation functionsAlexander Duyck
The enc_features variable isn't necessary since features isn't used anywhere after we create enc_features so instead just use a destructive AND on features itself and save ourselves the variable declaration. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11hv_netvsc: cleanup netdev feature flags for netvscsixiao@microsoft.com
1. Adding NETIF_F_TSO6 feature flag; 2. Adding NETIF_F_HW_CSUM. NETIF_F_IPV6_CSUM and NETIF_F_IP_CSUM are being deprecated; 3. Cleanup the coding style of flag assignment by using macro. Signed-off-by: Simon Xiao <sixiao@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11Merge branch 'ethtool-nfc-ipv6'David S. Miller
Edward Cree says: ==================== IPv6 NFC This series adds support for steering IPv6 flows using the ethtool NFC interface, and implements it for sfc devices. Tested using an in-development patch to the ethtool utility. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11sfc: implement IPv6 NFC (and IPV4_USER_FLOW)Edward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11ethtool: add IPv6 to the NFC APIEdward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11Merge branch 'cxgb4-tos'David S. Miller
Hariprasad Shenai says: ==================== Add TOS support and some cleanup This series adds TOS support for iWARP and also does some cleanup to make code more readable. Patch series is created against infiniband tree and includes patches on iw_cxgb4 and cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11cxgb4/iw_cxgb4: TOS supportHariprasad Shenai
This series provides support for iWARP applications to specify a TOS value and have that map to a VLAN Priority for iw_cxgb4 iWARP connections. In iw_cxgb4, when allocating an L2T entry, pass the skb_priority based on the tos value in the cm_id. Also pass the correct tos value during connection setup so the passive side gets the client's desired tos. When sending the FLOWC work request to FW, if the egress device is in a vlan, then use the vlan priority bits as the scheduling class. This allows associating RDMA connections with scheduling classes to provide traffic shaping per flow. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11iw_cxgb4: remove false error log entryHariprasad Shenai
Don't log errors if a listening endpoint is going away when procesing a PASS_ACCEPT_REQ message. This can happen. Change the error printk to a PDBG() debug log entry Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11iw_cxgb4: make queue allocation code more readableHariprasad Shenai
Rename local mm* variables to more meaningful names Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 02:17:02 +0000