summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-04fs/epoll: rename check_events label to send_eventsDavidlohr Bueso
It is currently called check_events because it, well, did exactly that. However, since the lockless ep_events_available() call, the label no longer checks, but just sends the events. Rename as such. Link: http://lkml.kernel.org/r/20181114182532.27981-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fs/epoll: avoid barrier after an epoll_wait(2) timeoutDavidlohr Bueso
Upon timeout, we can just exit out of the loop, without the cost of the changing the task's state with an smp_store_mb call. Just exit out of the loop and be done - setting the task state afterwards will be, of course, redundant. [dave@stgolabs.net: forgotten fixlets] Link: http://lkml.kernel.org/r/20181109155258.jxcr4t2pnz6zqct3@linux-r8p5 Link: http://lkml.kernel.org/r/20181108051006.18751-7-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fs/epoll: reduce the scope of wq lock in epoll_wait()Davidlohr Bueso
This patch aims at reducing ep wq.lock hold times in epoll_wait(2). For the blocking case, there is no need to constantly take and drop the spinlock, which is only needed to manipulate the waitqueue. The call to ep_events_available() is now lockless, and only exposed to benign races. Here, if false positive (returns available events and does not see another thread deleting an epi from the list) we call into send_events and then the list's state is correctly seen. Otoh, if a false negative and we don't see a list_add_tail(), for example, from irq callback, then it is rechecked again before blocking, which will see the correct state. In order for more accuracy to see concurrent list_del_init(), use the list_empty_careful() variant -- of course, this won't be safe against insertions from wakeup. For the overflow list we obviously need to prevent load/store tearing as we don't want to see partial values while the ready list is disabled. [dave@stgolabs.net: forgotten fixlets] Link: http://lkml.kernel.org/r/20181109155258.jxcr4t2pnz6zqct3@linux-r8p5 Link: http://lkml.kernel.org/r/20181108051006.18751-6-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Suggested-by: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fs/epoll: robustify ep->mtx held checksDavidlohr Bueso
Insted of just commenting how important it is, lets make it more robust and add a lockdep_assert_held() call. Link: http://lkml.kernel.org/r/20181108051006.18751-5-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fs/epoll: drop ovflist branch predictionDavidlohr Bueso
The ep->ovflist is a secondary ready-list to temporarily store events that might occur when doing sproc without holding the ep->wq.lock. This accounts for every time we check for ready events and also send events back to userspace; both callbacks, particularly the latter because of copy_to_user, can account for a non-trivial time. As such, the unlikely() check to see if the pointer is being used, seems both misleading and sub-optimal. In fact, we go to an awful lot of trouble to sync both lists, and populating the ovflist is far from an uncommon scenario. For example, profiling a concurrent epoll_wait(2) benchmark, with CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33% incorrect rate was seen; and when incrementally increasing the number of epoll instances (which is used, for example for multiple queuing load balancing models), up to a 90% incorrect rate was seen. Similarly, by deleting the prediction, 3% throughput boost was seen across incremental threads. Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fs/epoll: simplify ep_send_events_proc() ready-list loopDavidlohr Bueso
The current logic is a bit convoluted. Lets simplify this with a standard list_for_each_entry_safe() loop instead and just break out after maxevents is reached. While at it, remove an unnecessary indentation level in the loop when there are in fact ready events. Link: http://lkml.kernel.org/r/20181108051006.18751-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fs/epoll: remove max_nests argument from ep_call_nested()Davidlohr Bueso
Patch series "epoll: some miscellaneous optimizations". The following are some incremental optimizations on some of the epoll core. Each patch has the details, but together, the series is seen to shave off measurable cycles on a number of systems and workloads. For example, on a 40-core IB, a pipetest as well as parallel epoll_wait() benchmark show around a 20-30% increase in raw operations per second when the box is fully occupied (incremental thread counts), and up to 15% performance improvement with lower counts. Passes ltp epoll related testcases. This patch(of 6): All callers pass the EP_MAX_NESTS constant already, so lets simplify this a tad and get rid of the redundant parameter for nested eventpolls. Link: http://lkml.kernel.org/r/20181108051006.18751-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04checkpatch: warn on const char foo[] = "bar"; declarationsJoe Perches
These declarations should generally be static const to avoid poor compilation and runtime performance where compilers tend to initialize the const declaration for every call instead of using .rodata for the string. Miscellanea: - Convert spaces to tabs for indentation in 2 adjacent checks Link: http://lkml.kernel.org/r/10ea5f4b087dc911e41e187a4a2b5e79c7529aa3.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04drivers/firmware/memmap.c: modify memblock_alloc to memblock_alloc_nopanichuang.zijiang
memblock_alloc() never returns NULL because panic never returns. Link: http://lkml.kernel.org/r/1545640882-42009-1-git-send-email-huang.zijiang@zte.com.cn Signed-off-by: huang.zijiang <huang.zijiang@zte.com.cn> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04lib/genalloc.c: use vzalloc_node() to allocate the bitmapHuang Shijie
Some devices may have big memory on chip, such as over 1G. In some cases, the nbytes maybe bigger then 4M which is the bounday of the memory buddy system (4K default). So use vzalloc_node() to allocate the bitmap. Also use vfree to free it. Link: http://lkml.kernel.org/r/20181225015701.6289-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Skidanov <alexey.skidanov@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04lib/find_bit_benchmark.c: align test_find_next_and_bit with othersYury Norov
Contrary to other tests, test_find_next_and_bit() test uses tab formatting in output and get_cycles() instead of ktime_get(). get_cycles() is not supported by some arches, so ktime_get() fits better in generic code. Fix it and minor style issues, so the output looks like this: Start testing find_bit() with random-filled bitmap find_next_bit: 7142816 ns, 163282 iterations find_next_zero_bit: 8545712 ns, 164399 iterations find_last_bit: 6332032 ns, 163282 iterations find_first_bit: 20509424 ns, 16606 iterations find_next_and_bit: 4060016 ns, 73424 iterations Start testing find_bit() with sparse bitmap find_next_bit: 55984 ns, 656 iterations find_next_zero_bit: 19197536 ns, 327025 iterations find_last_bit: 65088 ns, 656 iterations find_first_bit: 5923712 ns, 656 iterations find_next_and_bit: 29088 ns, 1 iterations Link: http://lkml.kernel.org/r/20181123174803.10916-1-ynorov@caviumnetworks.com Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Norov, Yuri" <Yuri.Norov@cavium.com> Cc: Clement Courbet <courbet@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunkAlexey Skidanov
gen_pool_alloc_algo() uses different allocation functions implementing different allocation algorithms. With gen_pool_first_fit_align() allocation function, the returned address should be aligned on the requested boundary. If chunk start address isn't aligned on the requested boundary, the returned address isn't aligned too. The only way to get properly aligned address is to initialize the pool with chunks aligned on the requested boundary. If want to have an ability to allocate buffers aligned on different boundaries (for example, 4K, 1MB, ...), the chunk start address should be aligned on the max possible alignment. This happens because gen_pool_first_fit_align() looks for properly aligned memory block without taking into account the chunk start address alignment. To fix this, we provide chunk start address to gen_pool_first_fit_align() and change its implementation such that it starts looking for properly aligned block with appropriate offset (exactly as is done in CMA). Link: https://lkml.kernel.org/lkml/a170cf65-6884-3592-1de9-4c235888cc8a@intel.com Link: http://lkml.kernel.org/r/1541690953-4623-1-git-send-email-alexey.skidanov@intel.com Signed-off-by: Alexey Skidanov <alexey.skidanov@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fls: change parameter to unsigned intMatthew Wilcox
When testing in userspace, UBSAN pointed out that shifting into the sign bit is undefined behaviour. It doesn't really make sense to ask for the highest set bit of a negative value, so just turn the argument type into an unsigned int. Some architectures (eg ppc) already had it declared as an unsigned int, so I don't expect too many problems. Link: http://lkml.kernel.org/r/20181105221117.31828-1-willy@infradead.org Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04include/linux/printk.h: drop silly "static inline asmlinkage" from dump_stack()Alexey Dobriyan
Empty function will be inlined so asmlinkage doesn't do anything. Link: http://lkml.kernel.org/r/20181124093530.GE10969@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Joey Pabalinas <joeypabalinas@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04drivers/dma-buf/udmabuf.c: convert to use vm_fault_tSouptick Joarder
Use new return type vm_fault_t for fault handler. Link: http://lkml.kernel.org/r/20181106173628.GA12989@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04kernel/hung_task.c: break RCU locks based on jiffiesTetsuo Handa
check_hung_uninterruptible_tasks() is currently calling rcu_lock_break() for every 1024 threads. But check_hung_task() is very slow if printk() was called, and is very fast otherwise. If many threads within some 1024 threads called printk(), the RCU grace period might be extended enough to trigger RCU stall warnings. Therefore, calling rcu_lock_break() for every some fixed jiffies will be safer. Link: http://lkml.kernel.org/r/1544800658-11423-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04kernel/hung_task.c: force console verbose before panicLiu, Chuansheng
Based on commit 401c636a0eeb ("kernel/hung_task.c: show all hung tasks before panic"), we could get the call stack of hung task. However, if the console loglevel is not high, we still can not see the useful panic information in practice, and in most cases users don't set console loglevel to high level. This patch is to force console verbose before system panic, so that the real useful information can be seen in the console, instead of being like the following, which doesn't have hung task information. INFO: task init:1 blocked for more than 120 seconds. Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Kernel panic - not syncing: hung_task: blocked tasks CPU: 2 PID: 479 Comm: khungtaskd Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1 Call Trace: dump_stack+0x4f/0x65 panic+0xde/0x231 watchdog+0x290/0x410 kthread+0x12c/0x150 ret_from_fork+0x35/0x40 reboot: panic mode set: p,w Kernel Offset: 0x34000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A6015B675@SHSMSX101.ccr.corp.intel.com Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04build_bug.h: remove most of dummy BUILD_BUG_ON stubs for SparseMasahiro Yamada
The introduction of these dummy BUILD_BUG_ON stubs dates back to commmit 903c0c7cdc21 ("sparse: define dummy BUILD_BUG_ON definition for sparse"). At that time, BUILD_BUG_ON() was implemented with the negative array trick *and* the link-time trick, like this: extern int __build_bug_on_failed; #define BUILD_BUG_ON(condition) \ do { \ ((void)sizeof(char[1 - 2*!!(condition)])); \ if (condition) __build_bug_on_failed = 1; \ } while(0) Sparse is more strict about the negative array trick than GCC because Sparse requires the array length to be really constant. Here is the simple test code for the macro above: static const int x = 0; BUILD_BUG_ON(x); GCC is absolutely fine with it (-Wvla was enabled only very recently), but Sparse warns like this: error: bad constant expression error: cannot size expression (If you are using a newer version of Sparse, you will see a different warning message, "warning: Variable length array is used".) Anyway, Sparse was producing many false positives, and noisier than it should be at that time. With the previous commit, the leftover negative array trick is gone. Sparse is fine with the current BUILD_BUG_ON(), which is implemented by using the 'error' attribute. I am keeping the stub for BUILD_BUG_ON_ZERO(). Otherwise, Sparse would complain about the following code, which GCC is fine with: static const int x = 0; int y = BUILD_BUG_ON_ZERO(x); Link: http://lkml.kernel.org/r/1542856462-18836-3-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04build_bug.h: remove negative-array fallback for BUILD_BUG_ON()Masahiro Yamada
The kernel can only be compiled with an optimization option (-O2, -Os, or the currently proposed -Og). Hence, __OPTIMIZE__ is always defined in the kernel source. The fallback for the -O0 case is just hypothetical and pointless. Moreover, commit 0bb95f80a38f ("Makefile: Globally enable VLA warning") enabled -Wvla warning. The use of variable length arrays is banned. Link: http://lkml.kernel.org/r/1542856462-18836-2-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04Documentation/process/coding-style.rst: don't use "extern" with function ↵Alexey Dobriyan
prototypes `extern' with function prototypes makes lines longer and creates more characters on the screen. Do not bug people with checkpatch.pl warnings for now as fallout can be devastating. Link: http://lkml.kernel.org/r/20181101134153.GA29267@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04proc/sysctl: fix return error for proc_doulongvec_minmax()Cheng Lin
If the number of input parameters is less than the total parameters, an EINVAL error will be returned. For example, we use proc_doulongvec_minmax to pass up to two parameters with kern_table: { .procname = "monitor_signals", .data = &monitor_sigs, .maxlen = 2*sizeof(unsigned long), .mode = 0644, .proc_handler = proc_doulongvec_minmax, }, Reproduce: When passing two parameters, it's work normal. But passing only one parameter, an error "Invalid argument"(EINVAL) is returned. [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 1 2 [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals -bash: echo: write error: Invalid argument [root@cl150 ~]# echo $? 1 [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 3 2 [root@cl150 ~]# The following is the result after apply this patch. No error is returned when the number of input parameters is less than the total parameters. [root@cl150 ~]# echo 1 2 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 1 2 [root@cl150 ~]# echo 3 > /proc/sys/kernel/monitor_signals [root@cl150 ~]# echo $? 0 [root@cl150 ~]# cat /proc/sys/kernel/monitor_signals 3 2 [root@cl150 ~]# There are three processing functions dealing with digital parameters, __do_proc_dointvec/__do_proc_douintvec/__do_proc_doulongvec_minmax. This patch deals with __do_proc_doulongvec_minmax, just as __do_proc_dointvec does, adding a check for parameters 'left'. In __do_proc_douintvec, its code implementation explicitly does not support multiple inputs. static int __do_proc_douintvec(...){ ... /* * Arrays are not supported, keep this simple. *Do not* add * support for them. */ if (vleft != 1) { *lenp = 0; return -EINVAL; } ... } So, just __do_proc_doulongvec_minmax has the problem. And most use of proc_doulongvec_minmax/proc_doulongvec_ms_jiffies_minmax just have one parameter. Link: http://lkml.kernel.org/r/1544081775-15720-1-git-send-email-cheng.lin130@zte.com.cn Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fs/proc/base.c: slightly faster /proc/*/limitsAlexey Dobriyan
Header of /proc/*/limits is a fixed string, so print it directly without formatting specifiers. Link: http://lkml.kernel.org/r/20181203164242.GB6904@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fs/proc/inode.c: delete unnecessary variable in proc_alloc_inode()Alexey Dobriyan
Link: http://lkml.kernel.org/r/20181203164015.GA6904@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fs/proc/util.c: include fs/proc/internal.h for name_to_int()Eric Biggers
name_to_int() is defined in fs/proc/util.c and declared in fs/proc/internal.h, but the declaration isn't included at the point of the definition. Include the header to enforce that the definition matches the declaration. This addresses a gcc warning when -Wmissing-prototypes is enabled. Link: http://lkml.kernel.org/r/20181115001833.49371-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fs/proc/base.c: use ns_capable instead of capable for timerslack_nsBenjamin Gordon
Access to timerslack_ns is controlled by a process having CAP_SYS_NICE in its effective capability set, but the current check looks in the root namespace instead of the process' user namespace. Since a process is allowed to do other activities controlled by CAP_SYS_NICE inside a namespace, it should also be able to adjust timerslack_ns. Link: http://lkml.kernel.org/r/20181030180012.232896-1-bmgordon@google.com Signed-off-by: Benjamin Gordon <bmgordon@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: John Stultz <john.stultz@linaro.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Oren Laadan <orenl@cellrox.com> Cc: Ruchi Kandoi <kandoiruchi@google.com> Cc: Rom Lemarchand <romlem@android.com> Cc: Todd Kjos <tkjos@google.com> Cc: Colin Cross <ccross@android.com> Cc: Nick Kralevich <nnk@google.com> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Elliott Hughes <enh@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04make 'user_access_begin()' do 'access_ok()'Linus Torvalds
Originally, the rule used to be that you'd have to do access_ok() separately, and then user_access_begin() before actually doing the direct (optimized) user access. But experience has shown that people then decide not to do access_ok() at all, and instead rely on it being implied by other operations or similar. Which makes it very hard to verify that the access has actually been range-checked. If you use the unsafe direct user accesses, hardware features (either SMAP - Supervisor Mode Access Protection - on x86, or PAN - Privileged Access Never - on ARM) do force you to use user_access_begin(). But nothing really forces the range check. By putting the range check into user_access_begin(), we actually force people to do the right thing (tm), and the range check vill be visible near the actual accesses. We have way too long a history of people trying to avoid them. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04Merge branches 'misc.misc' and 'work.iov_iter' into for-linusAl Viro
2019-01-04i915: fix missing user_access_end() in page fault exception caseLinus Torvalds
When commit fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error") unified the error handling for various user access problems, it didn't do the user_access_end() that is needed for the unsafe_put_user() case. It's not a huge deal: a missed user_access_end() will only mean that SMAP protection isn't active afterwards, and for the error case we'll be returning to user mode soon enough anyway. But it's wrong, and adding the proper user_access_end() is trivial enough (and doing it for the other error cases where it isn't needed doesn't hurt). I noticed it while doing the same prep-work for changing user_access_begin() that precipitated the access_ok() changes in commit 96d4f267e40f ("Remove 'type' argument from access_ok() function"). Fixes: fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@kernel.org # v4.20 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04Fix access_ok() fallout for sparc32 and powerpcLinus Torvalds
These two architectures actually had an intentional use of the 'type' argument to access_ok() just to avoid warnings. I had actually noticed the powerpc one, but forgot to then fix it up. And I missed the sparc32 case entirely. This is hopefully all of it. Reported-by: Mathieu Malaterre <malat@debian.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: 96d4f267e40f ("Remove 'type' argument from access_ok() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04Merge commit 'smp-hotplug^{/omap2}' into for-linusRussell King
2019-01-04arm64: compat: Hook up io_pgetevents() for 32-bit tasksWill Deacon
Commit 73aeb2cbcdc9 ("ARM: 8787/1: wire up io_pgetevents syscall") hooked up the io_pgetevents() system call for 32-bit ARM, so we can do the same for the compat wrapper on arm64. Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04arm64: compat: Don't pull syscall number from regs in arm_compat_syscallWill Deacon
The syscall number may have been changed by a tracer, so we should pass the actual number in from the caller instead of pulling it from the saved r7 value directly. Cc: <stable@vger.kernel.org> Cc: Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04arm64: compat: Avoid sending SIGILL for unallocated syscall numbersWill Deacon
The ARM Linux kernel handles the EABI syscall numbers as follows: 0 - NR_SYSCALLS-1 : Invoke syscall via syscall table NR_SYSCALLS - 0xeffff : -ENOSYS (to be allocated in future) 0xf0000 - 0xf07ff : Private syscall or -ENOSYS if not allocated > 0xf07ff : SIGILL Our compat code gets this wrong and ends up sending SIGILL in response to all syscalls greater than NR_SYSCALLS which have a value greater than 0x7ff in the bottom 16 bits. Fix this by defining the end of the ARM private syscall region and checking the syscall number against that directly. Update the comment while we're at it. Cc: <stable@vger.kernel.org> Cc: Dave Martin <Dave.Martin@arm.com> Reported-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04arm64/sve: Disentangle <uapi/asm/ptrace.h> from <uapi/asm/sigcontext.h>Dave Martin
Currently, <uapi/asm/sigcontext.h> provides common definitions for describing SVE context structures that are also used by the ptrace definitions in <uapi/asm/ptrace.h>. For this reason, a #include of <asm/sigcontext.h> was added in ptrace.h, but it this turns out that this can interact badly with userspace code that tries to include ptrace.h on top of the libc headers (which may provide their own shadow definitions for sigcontext.h). To make the headers easier for userspace to consume, this patch bounces the common definitions into an __SVE_* namespace and moves them to a backend header <uapi/asm/sve_context.h> that can be included by the other headers as appropriate. This should allow ptrace.h to be used alongside libc's sigcontext.h (if any) without ill effects. This should make the situation unambiguous: <asm/sigcontext.h> is the header to include for the sigframe-specific definitions, while <asm/ptrace.h> is the header to include for ptrace-specific definitions. To avoid conflicting with existing usage, <asm/sigcontext.h> remains the canonical way to get the common definitions for SVE_VQ_MIN, sve_vq_from_vl() etc., both in userspace and in the kernel: relying on these being defined as a side effect of including just <asm/ptrace.h> was never intended to be safe. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04arm64/sve: ptrace: Fix SVE_PT_REGS_OFFSET definitionDave Martin
SVE_PT_REGS_OFFSET is supposed to indicate the offset for skipping over the ptrace NT_ARM_SVE header (struct user_sve_header) to the start of the SVE register data proper. However, currently SVE_PT_REGS_OFFSET is defined in terms of struct sve_context, which is wrong: that structure describes the SVE header in the signal frame, not in the ptrace regset. This patch fixes the definition to use the ptrace header structure struct user_sve_header instead. By good fortune, the two structures are the same size anyway, so there is no functional or ABI change. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04powerpc: Drop use of 'type' from access_ok()Mathieu Malaterre
In commit 05a4ab823983 ("powerpc/uaccess: fix warning/error with access_ok()") an attempt was made to remove a warning by referencing the variable `type`. However in commit 96d4f267e40f ("Remove 'type' argument from access_ok() function") the variable `type` has been removed, breaking the build: arch/powerpc/include/asm/uaccess.h:66:32: error: ‘type’ undeclared (first use in this function) This essentially reverts commit 05a4ab823983 ("powerpc/uaccess: fix warning/error with access_ok()") to fix the error. Fixes: 96d4f267e40f ("Remove 'type' argument from access_ok() function") Signed-off-by: Mathieu Malaterre <malat@debian.org> [mpe: Reword change log slightly.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-04Merge branch 'master' into fixesMichael Ellerman
We have a fix to apply on top of commit 96d4f267e40f ("Remove 'type' argument from access_ok() function"), so merge master to get it.
2019-01-04drivers/perf: hisi: Fixup one DDRC PMU register offsetShaokun Zhang
For DDRC PMU, each PMU counter is fixed-purpose. There is a mismatch between perf list and driver definition on rw_chg event. # perf list | grep chg hisi_sccl1_ddrc0/rnk_chg/ [Kernel PMU event] hisi_sccl1_ddrc0/rw_chg/ [Kernel PMU event] But the register offset of rw_chg event is not defined in the driver, meanwhile bnk_chg register offset is mis-defined, let's fixup it. Fixes: 904dcf03f086 ("perf: hisi: Add support for HiSilicon SoC DDRC PMU driver") Cc: stable@vger.kernel.org Cc: John Garry <john.garry@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Reported-by: Weijian Huang <huangweijian4@hisilicon.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04arm64: replace arm64-obj-* in Makefile with obj-*Masahiro Yamada
Use the standard obj-$(CONFIG_...) syntex. The behavior is still the same. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04dma-mapping: remove a few unused exportsChristoph Hellwig
Now that the slow path DMA API calls are implemented out of line a few helpers only used by them don't need to be exported anymore. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-04dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMAChristoph Hellwig
This avoids link failures in drivers using the DMA API, when they are compiled for user mode Linux with CONFIG_COMPILE_TEST=y. Fixes: 356da6d0cd ("dma-mapping: bypass indirect calls for dma-direct") Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-04dma-mapping: remove dmam_{declare,release}_coherent_memoryChristoph Hellwig
These functions have never been used. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-04dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrsChristoph Hellwig
dmam_alloc_coherent is just the default no-flags case of dmam_alloc_attrs, so take advantage of this similar to the non-managed version. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-04dma-mapping: implement dma_map_single_attrs using dma_map_page_attrsChristoph Hellwig
And also switch the way we implement the unmap side around to stay consistent. This ensures dma-debug works again because it records which function we used for mapping to ensure it is also used for unmapping, and also reduces further code duplication. Last but not least this also officially allows calling dma_sync_single_* for mappings created using dma_map_page, which is perfectly fine given that the sync calls only take a dma_addr_t, but not a virtual address or struct page. Fixes: 7f0fee242e ("dma-mapping: merge dma_unmap_page_attrs and dma_unmap_single_attrs") Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: LABBE Corentin <clabbe.montjoie@gmail.com>
2019-01-04Merge tag 'drm-misc-next-fixes-2019-01-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Fixes for v4.21: - Fix null pointer dereference on null state pointer. - Fix leaking damage clip when destroying plane state. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/46c4dbcd-dc23-7b46-fda9-16fe33e6ceef@linux.intel.com
2019-01-03sh: ftrace: Fix missing parenthesis in WARN_ON()Steven Rostedt (VMware)
Adding a function inside a WARN_ON() didn't close the WARN_ON parathesis. Link: http://lkml.kernel.org/r/201901020958.28Mzbs0O%fengguang.wu@intel.com Cc: linux-sh@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Reported-by: kbuild test robot <lkp@intel.com> Fixes: cec8d0e7f06e ("sh: ftrace: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Merge tag 'locks-v4.21-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull file locking bugfix from Jeff Layton: "This is a one-line fix for a bug that syzbot turned up in the new patches to mitigate the thundering herd when a lock is released" * tag 'locks-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: fix error in locks_move_blocks()
2019-01-03Merge tag 'sound-fix-4.21-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Among a few HD-audio fixes, the only significant one is the regression fix on some machines like Dell XPS due to the default binding changes. We ended up reverting the whole since the fix for ASoC HD-audio driver won't be available immediately" * tag 'sound-fix-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Revert DSP detection on legacy HD-audio driver ALSA: hda/tegra: clear pending irq handlers ALSA: hda/realtek: Enable the headset mic auto detection for ASUS laptops
2019-01-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several fixes here. Basically split down the line between newly introduced regressions and long existing problems: 1) Double free in tipc_enable_bearer(), from Cong Wang. 2) Many fixes to nf_conncount, from Florian Westphal. 3) op->get_regs_len() can throw an error, check it, from Yunsheng Lin. 4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman driver, from Scott Wood. 5) Inifnite loop in fib_empty_table(), from Yue Haibing. 6) Use after free in ax25_fillin_cb(), from Cong Wang. 7) Fix socket locking in nr_find_socket(), also from Cong Wang. 8) Fix WoL wakeup enable in r8169, from Heiner Kallweit. 9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani. 10) Fix ptr_ring wrap during queue swap, from Cong Wang. 11) Missing shutdown callback in hinic driver, from Xue Chaojing. 12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano Brivio. 13) BPF out of bounds speculation fixes from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) ipv6: Consider sk_bound_dev_if when binding a socket to an address ipv6: Fix dump of specific table with strict checking bpf: add various test cases to selftests bpf: prevent out of bounds speculation on pointer arithmetic bpf: fix check_map_access smin_value test when pointer contains offset bpf: restrict unknown scalars of mixed signed bounds for unprivileged bpf: restrict stack pointer arithmetic for unprivileged bpf: restrict map value pointer arithmetic for unprivileged bpf: enable access to ax register also from verifier rewrite bpf: move tmp variable into ax register in interpreter bpf: move {prev_,}insn_idx into verifier env isdn: fix kernel-infoleak in capi_unlocked_ioctl ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error net/hamradio/6pack: use mod_timer() to rearm timers net-next/hinic:add shutdown callback net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT ip: validate header length on virtual device xmit tap: call skb_probe_transport_header after setting skb->dev ptr_ring: wrap back ->producer in __ptr_ring_swap_queue() net: rds: remove unnecessary NULL check ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 07:07:37 +0000