summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-30crypto: qat - zero esram only for DH85x devicesGiovanni Cabiddu
Zero embedded ram in DH85x devices. This is not needed for newer generations as it is done by HW. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-30crypto: qat - fix bar discovery for c62xGiovanni Cabiddu
Some accelerators of the c62x series have only two bars. This patch skips BAR0 if the accelerator does not have it. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-30crypto: qat - replace hardcoded BIT(0) in vf_isrGiovanni Cabiddu
Replace BIT(0) macro with proper definition in pf2vf path Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-30crypto: qat - fix comments describing adf_disable_sriov()Ahsan Atta
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-30crypto: qat - fix indentationAhsan Atta
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-28Revert "crypto: arm64/ARM: NEON accelerated ChaCha20"Herbert Xu
This patch reverts the following commits: 8621caa0d45e731f2e9f5889ff5bb384fcd6e059 8096667273477e735b0072b11a6d617ccee45e5f I should not have applied them because they had already been obsoleted by a subsequent patch series. They also cause a build failure because of the subsequent commit 9ae433bc79f9. Fixes: 9ae433bc79f ("crypto: chacha20 - convert generic and...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: mediatek - add DT bindings documentationRyder Lee
Add DT bindings documentation for the crypto driver Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: mediatek - Add crypto driver support for some MediaTek chipsRyder Lee
This adds support for the MediaTek hardware accelerator on mt7623/mt2701/mt8521p SoC. This driver currently implement: - SHA1 and SHA2 family(HMAC) hash algorithms. - AES block cipher in CBC/ECB mode with 128/196/256 bits keys. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: algif_hash - avoid zero-sized arrayJiri Slaby
With this reproducer: struct sockaddr_alg alg = { .salg_family = 0x26, .salg_type = "hash", .salg_feat = 0xf, .salg_mask = 0x5, .salg_name = "digest_null", }; int sock, sock2; sock = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(sock, (struct sockaddr *)&alg, sizeof(alg)); sock2 = accept(sock, NULL, NULL); setsockopt(sock, SOL_ALG, ALG_SET_KEY, "\x9b\xca", 2); accept(sock2, NULL, NULL); ==== 8< ======== 8< ======== 8< ======== 8< ==== one can immediatelly see an UBSAN warning: UBSAN: Undefined behaviour in crypto/algif_hash.c:187:7 variable length array bound value 0 <= 0 CPU: 0 PID: 15949 Comm: syz-executor Tainted: G E 4.4.30-0-default #1 ... Call Trace: ... [<ffffffff81d598fd>] ? __ubsan_handle_vla_bound_not_positive+0x13d/0x188 [<ffffffff81d597c0>] ? __ubsan_handle_out_of_bounds+0x1bc/0x1bc [<ffffffffa0e2204d>] ? hash_accept+0x5bd/0x7d0 [algif_hash] [<ffffffffa0e2293f>] ? hash_accept_nokey+0x3f/0x51 [algif_hash] [<ffffffffa0e206b0>] ? hash_accept_parent_nokey+0x4a0/0x4a0 [algif_hash] [<ffffffff8235c42b>] ? SyS_accept+0x2b/0x40 It is a correct warning, as hash state is propagated to accept as zero, but creating a zero-length variable array is not allowed in C. Fix this as proposed by Herbert -- do "?: 1" on that site. No sizeof or similar happens in the code there, so we just allocate one byte even though we do not use the array. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> (maintainer:CRYPTO API) Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: bfin_crc - Remove unneeded linux/miscdevice.h includeCorentin LABBE
bfin_crc.h driver does not use any miscdevice, so this patch remove this unnecessary inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: bfin_crc - Fix format printing warningCorentin LABBE
bfin_crc.c print some u32 as unsigned long ans so gcc complains about it. This patch remove the long print qualifier. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27hwrng: core - remove unused PFX macroCorentin LABBE
This patch remove the unused PFX macro. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27hwrng: core - Move hwrng miscdev minor number to include/linux/miscdevice.hCorentin LABBE
This patch move the define for hwrng's miscdev minor number to include/linux/miscdevice.h. It's better that all minor number are in the same place. Rename it to HWRNG_MINOR (from RNG_MISCDEV_MINOR) in he process since no other miscdev define have MISCDEV in their name. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27hwrng: core - Replace asm/uaccess.h by linux/uaccess.hCorentin LABBE
This patch fix the checkpatch warning about asm/uaccess.h. In the same time, we sort the headers in alphabetical order. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27hwrng: core - Rewrite the headerCorentin LABBE
checkpatch have lot of complaint about header. Furthermore, the header have some offtopic/useless information. This patch rewrite a proper header. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27hwrng: core - rewrite better comparison to NULLCorentin LABBE
This patch fix the checkpatch warning "Comparison to NULL could be written "!ptr" Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27hwrng: core - do not use multiple blank linesCorentin LABBE
This patch fix the checkpatch warning "Please don't use multiple blank lines" Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: aesni-intel - RFC4106 can zero copy when !PageHighMemIlya Lesokhin
In the common case of !PageHighMem we can do zero copy crypto even if sg crosses a pages boundary. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: drivers - bring back alphabetical order of MakefileCorentin LABBE
THe major content of drivers/crypto/Makefile is sorted, only recent addition break this sort. This patch bring back this alphabetical sorting. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: chacha20 - convert generic and x86 versions to skcipherArd Biesheuvel
This converts the ChaCha20 code from a blkcipher to a skcipher, which is now the preferred way to implement symmetric block and stream ciphers. This ports the generic and x86 versions at the same time because the latter reuses routines of the former. Note that the skcipher_walk() API guarantees that all presented blocks except the final one are a multiple of the chunk size, so we can simplify the encrypt() routine somewhat. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: arm/chacha20 - implement NEON version based on SSE3 codeArd Biesheuvel
This is a straight port to ARM/NEON of the x86 SSE3 implementation of the ChaCha20 stream cipher. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: arm64/chacha20 - implement NEON version based on SSE3 codeArd Biesheuvel
This is a straight port to arm64/NEON of the x86 SSE3 implementation of the ChaCha20 stream cipher. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27crypto: testmgr - Use heap buffer for acomp test inputLaura Abbott
Christopher Covington reported a crash on aarch64 on recent Fedora kernels: kernel BUG at ./include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 752 Comm: cryptomgr_test Not tainted 4.9.0-11815-ge93b1cc #162 Hardware name: linux,dummy-virt (DT) task: ffff80007c650080 task.stack: ffff800008910000 PC is at sg_init_one+0xa0/0xb8 LR is at sg_init_one+0x24/0xb8 ... [<ffff000008398db8>] sg_init_one+0xa0/0xb8 [<ffff000008350a44>] test_acomp+0x10c/0x438 [<ffff000008350e20>] alg_test_comp+0xb0/0x118 [<ffff00000834f28c>] alg_test+0x17c/0x2f0 [<ffff00000834c6a4>] cryptomgr_test+0x44/0x50 [<ffff0000080dac70>] kthread+0xf8/0x128 [<ffff000008082ec0>] ret_from_fork+0x10/0x50 The test vectors used for input are part of the kernel image. These inputs are passed as a buffer to sg_init_one which eventually blows up with BUG_ON(!virt_addr_valid(buf)). On arm64, virt_addr_valid returns false for the kernel image since virt_to_page will not return the correct page. Fix this by copying the input vectors to heap buffer before setting up the scatterlist. Reported-by: Christopher Covington <cov@codeaurora.org> Fixes: d7db7a882deb ("crypto: acomp - update testmgr with support for acomp") Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-25Linux 4.10-rc1Linus Torvalds
2016-12-25powerpc: Fix build warning on 32-bit PPCLarry Finger
I am getting the following warning when I build kernel 4.9-git on my PowerBook G4 with a 32-bit PPC processor: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef] This problem is evident after commit 989cea5c14be ("kbuild: prevent lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an error that has been in the code since 2005 when this source file was created. That was with commit 9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S"). The offending line does not make a lot of sense. This error does not seem to cause any errors in the executable, thus I am not recommending that it be applied to any stable versions. Thanks to Nicholas Piggin for suggesting this solution. Fixes: 9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25avoid spurious "may be used uninitialized" warningLinus Torvalds
The timer type simplifications caused a new gcc warning: drivers/base/power/domain.c: In function ‘genpd_runtime_suspend’: drivers/base/power/domain.c:562:14: warning: ‘time_start’ may be used uninitialized in this function [-Wmaybe-uninitialized] elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); despite the actual use of "time_start" not having changed in any way. It appears that simply changing the type of ktime_t from a union to a plain scalar type made gcc check the use. The variable wasn't actually used uninitialized, but gcc apparently failed to notice that the conditional around the use was exactly the same as the conditional around the initialization of that variable. Add an unnecessary initialization just to shut up the compiler. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t
2016-12-25Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP hotplug notifier removal from Thomas Gleixner: "This is the final cleanup of the hotplug notifier infrastructure. The series has been reintgrated in the last two days because there came a new driver using the old infrastructure via the SCSI tree. Summary: - convert the last leftover drivers utilizing notifiers - fixup for a completely broken hotplug user - prevent setup of already used states - removal of the notifiers - treewide cleanup of hotplug state names - consolidation of state space There is a sphinx based documentation pending, but that needs review from the documentation folks" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-xp: Consolidate hotplug state space irqchip/gic: Consolidate hotplug state space coresight/etm3/4x: Consolidate hotplug state space cpu/hotplug: Cleanup state names cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions staging/lustre/libcfs: Convert to hotplug state machine scsi/bnx2i: Convert to hotplug state machine scsi/bnx2fc: Convert to hotplug state machine cpu/hotplug: Prevent overwriting of callbacks x86/msr: Remove bogus cleanup from the error path bus: arm-ccn: Prevent hotplug callback leak perf/x86/intel/cstate: Prevent hotplug callback leak ARM/imx/mmcd: Fix broken cpu hotplug handling scsi: qedi: Convert to hotplug state machine
2016-12-25Merge branch 'turbostat' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: remove obsolete -M, -m, -C, -c options tools/power turbostat: Make extensible via the --add parameter tools/power turbostat: Denverton uses a 25 MHz crystal, not 19.2 MHz tools/power turbostat: line up headers when -M is used tools/power turbostat: fix SKX PKG_CSTATE_LIMIT decoding tools/power turbostat: Support Knights Mill (KNM) tools/power turbostat: Display HWP OOB status tools/power turbostat: fix Denverton BCLK tools/power turbostat: use intel-family.h model strings tools/power/turbostat: Add Denverton RAPL support tools/power/turbostat: Add Denverton support tools/power/turbostat: split core MSR support into status + limit tools/power turbostat: fix error case overflow read of slm_freq_table[] tools/power turbostat: Allocate correct amount of fd and irq entries tools/power turbostat: switch to tab delimited output tools/power turbostat: Gracefully handle ACPI S3 tools/power turbostat: tidy up output on Joule counter overflow
2016-12-25mm: add PageWaiters indicating tasks are waiting for a page bitNicholas Piggin
Add a new page flag, PageWaiters, to indicate the page waitqueue has tasks waiting. This can be tested rather than testing waitqueue_active which requires another cacheline load. This bit is always set when the page has tasks on page_waitqueue(page), and is set and cleared under the waitqueue lock. It may be set when there are no tasks on the waitqueue, which will cause a harmless extra wakeup check that will clears the bit. The generic bit-waitqueue infrastructure is no longer used for pages. Instead, waitqueues are used directly with a custom key type. The generic code was not flexible enough to have PageWaiters manipulation under the waitqueue lock (which simplifies concurrency). This improves the performance of page lock intensive microbenchmarks by 2-3%. Putting two bits in the same word opens the opportunity to remove the memory barrier between clearing the lock bit and testing the waiters bit, after some work on the arch primitives (e.g., ensuring memory operand widths match and cover both bits). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25mm: Use owner_priv bit for PageSwapCache, valid when PageSwapBackedNicholas Piggin
A page is not added to the swap cache without being swap backed, so PageSwapBacked mappings can use PG_owner_priv_1 for PageSwapCache. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-25ktime: Get rid of ktime_equal()Thomas Gleixner
No point in going through loops and hoops instead of just comparing the values. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25ktime: Get rid of the unionThomas Gleixner
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-25irqchip/armada-xp: Consolidate hotplug state spaceThomas Gleixner
The mpic is either the main interrupt controller or is cascaded behind a GIC. The mpic is single instance and the modes are mutually exclusive, so there is no reason to have seperate cpu hotplug states. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/20161221192112.333161745@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25irqchip/gic: Consolidate hotplug state spaceThomas Gleixner
Even if both drivers are compiled in only one instance can run on a given system depending on the available GIC version. So having seperate hotplug states for them is pointless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.252416267@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25coresight/etm3/4x: Consolidate hotplug state spaceThomas Gleixner
Even if both drivers are compiled in only one instance can run on a given system depending on the available tracer cell. So having seperate hotplug states for them is pointless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/20161221192112.162765484@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25cpu/hotplug: Cleanup state namesThomas Gleixner
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25cpu/hotplug: Remove obsolete cpu hotplug register/unregister functionsThomas Gleixner
hotcpu_notifier(), cpu_notifier(), __hotcpu_notifier(), __cpu_notifier(), register_hotcpu_notifier(), register_cpu_notifier(), __register_hotcpu_notifier(), __register_cpu_notifier(), unregister_hotcpu_notifier(), unregister_cpu_notifier(), __unregister_hotcpu_notifier(), __unregister_cpu_notifier() are unused now. Remove them and all related code. Remove also the now pointless cpu notifier error injection mechanism. The states can be executed step by step and error rollback is the same as cpu down, so any state transition can be tested w/o requiring the notifier error injection. Some CPU hotplug states are kept as they are (ab)used for hotplug state tracking. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20161221192112.005642358@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25staging/lustre/libcfs: Convert to hotplug state machineAnna-Maria Gleixner
Install the callbacks via the state machine. No functional change. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: devel@driverdev.osuosl.org Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: rt@linutronix.de Cc: lustre-devel@lists.lustre.org Link: http://lkml.kernel.org/r/20161202110027.htzzeervzkoc4muv@linutronix.de Link: http://lkml.kernel.org/r/20161221192111.922872524@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25scsi/bnx2i: Convert to hotplug state machineSebastian Andrzej Siewior
Install the callbacks via the state machine. No functional change. This is the minimal fixup so we can remove the hotplug notifier mess completely. The real rework of this driver to use work queues is still stuck in review/testing on the SCSI mailing list. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: Johannes Thumshirn <jth@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20161221192111.836895753@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25scsi/bnx2fc: Convert to hotplug state machineSebastian Andrzej Siewior
Install the callbacks via the state machine. No functional change. This is the minimal fixup so we can remove the hotplug notifier mess completely. The real rework of this driver to use work queues is still stuck in review/testing on the SCSI mailing list. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: Johannes Thumshirn <jth@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20161221192111.757309869@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25cpu/hotplug: Prevent overwriting of callbacksThomas Gleixner
Developers manage to overwrite states blindly without thought. That's fatal and hard to debug. Add sanity checks to make it fail. This requries to restructure the code so that the dynamic state allocation happens in the same lock protected section as the actual store. Otherwise the previous assignment of 'Reserved' to the name field would trigger the overwrite check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192111.675234535@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25x86/msr: Remove bogus cleanup from the error pathThomas Gleixner
The error cleanup which is invoked when the hotplug state setup failed tries to remove the failed state, which is broken. Fixes: 8fba38c937cd ("x86/msr: Convert to hotplug state machine") Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de>
2016-12-25bus: arm-ccn: Prevent hotplug callback leakThomas Gleixner
In case the driver registration fails, the hotplug callback is leaked. Not fatal, because it's never invoked as there are no instances registered, but wrong nevertheless. Fixes: fdc15a36d84e ("bus/arm-ccn: Convert to hotplug statemachine") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com>
2016-12-25perf/x86/intel/cstate: Prevent hotplug callback leakThomas Gleixner
If the pmu registration fails the registered hotplug callbacks are not removed. Wrong in any case, but fatal in case of a modular driver. Replace the nonsensical state names with proper ones while at it. Fixes: 77c34ef1c319 ("perf/x86/intel/cstate: Convert Intel CSTATE to hotplug state machine") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org
2016-12-25ARM/imx/mmcd: Fix broken cpu hotplug handlingThomas Gleixner
The cpu hotplug support of this perf driver is broken in several ways: 1) It adds a instance before setting up the state. 2) The state for the instance is different from the state of the callback. It's just a randomly chosen state. 3) The instance registration is not error checked so nobody noticed that the call can never succeed. 4) The state for the multi install callbacks is chosen randomly and overwrites existing state. This is now prevented by the core code so the call is guaranteed to fail. 5) The error exit path in the init function leaves the instance registered and then frees the memory which contains the enqueued hlist node. 6) The remove function is removing the state and not the instance. Fix it by: - Setting up the state before adding instances. Use a dynamically allocated state for it. - Installing instances after the state has been set up - Removing the instance in the error path before freeing memory - Removing the instance not the state in the driver remove callback While at is use raw_cpu_processor_id(), because cpu_processor_id() cannot be used in preemptible context, and set the driver data after successful registration of the pmu. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Frank Li <frank.li@nxp.com> Cc: Zhengyu Shen <zhengyu.shen@nxp.com> Link: http://lkml.kernel.org/r/20161221192111.596204211@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25scsi: qedi: Convert to hotplug state machineThomas Gleixner
The CPU hotplug code is a trainwreck. It leaks a notifier in case of driver registration error and the per cpu loop is racy against cpu hotplug. Aside of that the driver should have been written and merged with the new state machine interfaces in the first place. Mop up the mess and Convert it to the hotplug state machine. Signed-off-by: Thomas Grumpy Gleixner <tglx@linutronix.de> Cc: Nilesh Javali <nilesh.javali@cavium.com> Cc: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Cc: Chad Dupuis <chad.dupuis@cavium.com> Cc: Saurav Kashyap <saurav.kashyap@cavium.com> Cc: Arun Easi <arun.easi@cavium.com> Cc: Manish Rangankar <manish.rangankar@cavium.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
2016-12-24tools/power turbostat: remove obsolete -M, -m, -C, -c optionsLen Brown
The new --add option has replaced the -M, -m, -C, -c options Eg. -M 0x10 is now --add msr0x10,raw -m 0x10 is now --add msr0x10,raw,u32 -C 0x10 is now --add msr0x10,delta -c 0x10 is now --add msr0x10,delta,u32 The --add option can be repeated to add any number of counters, while the previous options were limited to adding one of each type. In addition, the --add option can accept a column label, and can also display a counter as a percentage of elapsed cycles. Eg. --add msr0x3fe,core,percent,MY_CC3 Signed-off-by: Len Brown <len.brown@intel.com>