summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-27tools: gpio: Fix out-of-tree build regressionAnssi Hannula
Commit 0161a94e2d1c7 ("tools: gpio: Correctly add make dependencies for gpio_utils") added a make rule for gpio-utils-in.o but used $(output) instead of the correct $(OUTPUT) for the output directory, breaking out-of-tree build (O=xx) with the following error: No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop. Fix that. Fixes: 0161a94e2d1c ("tools: gpio: Correctly add make dependencies for gpio_utils") Cc: <stable@vger.kernel.org> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27gpio: gpiolib: fix a doc warningMauro Carvalho Chehab
Use a different markup for the ERR_PTR, as %FOO doesn't work if there are parenthesis. So, use, instead: ``ERR_PTR(-EINVAL)`` This fixes the following warning: ./drivers/gpio/gpiolib.c:139: WARNING: Inline literal start-string without end-string. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/51197e3568f073e22c280f0584bfa20b44436708.1584456635.git.mchehab+huawei@kernel.org Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1Thierry Reding
The GG.0 and GG.1 GPIOs serve as CLKREQ and RST pins, respectively, for PCIe controller 5 on Tegra194. When this controller is configured in endpoint mode, these pins need to be used as GPIOs by the PCIe endpoint driver. Typically the mode programming of these pins (GPIO vs. SFIO) is performed by early boot firmware to ensure that the configuration is consistent. However, the GG.0 and GG.1 pins are part of a special power partition that is not enabled during early boot, and hence the early boot firmware cannot program these pins to be GPIOs (they are SFIO by default). Adding them as pin ranges for the pin controller allows the pin controller to be involved when these pins are requested as GPIOs and allows the proper programming to take place. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200319122737.3063291-4-thierry.reding@gmail.com Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27gpio: tegra186: Add support for pin rangesThierry Reding
Add support for Tegra SoC generations to specify a list of pin ranges that map GPIOs to ranges of pins in the pin controller. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200319122737.3063291-3-thierry.reding@gmail.com Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27gpio: Support GPIO controllers without pin-rangesThierry Reding
Wake gpiochip_generic_request() call into the pinctrl helpers only if a GPIO controller had any pin-ranges assigned to it. This allows a driver to unconditionally use this helper if it supports multiple devices of which only a subset have pin-ranges assigned to them. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200319122737.3063291-2-thierry.reding@gmail.com Tested-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-26ARM: integrator: impd1: Use GPIO_LOOKUP() helper macroGeert Uytterhoeven
impd1_probe() fills in the GPIO lookup table by manually populating an array of gpiod_lookup structures. Use the existing GPIO_LOOKUP() helper macro instead, to relax a dependency on the gpiod_lookup structure's member names. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20200324135653.6676-1-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-26gpio: brcmstb: support gpio-line-names propertyDoug Berger
The default handling of the gpio-line-names property by the gpiolib-of implementation does not work with the multiple gpiochip banks per device structure used by the gpio-brcmstb driver. This commit adds driver level support for the device tree property so that GPIO lines can be assigned friendly names. Signed-off-by: Doug Berger <opendmb@gmail.com> Link: https://lore.kernel.org/r/1583780521-45702-1-git-send-email-opendmb@gmail.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-25Merge tag 'gpio-updates-for-v5.7-part4' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.7 part 4 - improve comments in the uapi header - fix documentation issues - add a warning to gpio-pl061 when the IRQ line is not configured - allow building gpio-mxc and gpio-mxs with COMPILE_TEST enabled - don't print an error message when an optional IRQ is missing in gpio-mvebu - fix a potential segfault in gpio-hammer - fix a couple typos and coding style issues in gpio tools - provide a new flag in gpio-mmio and use it in mt7621 to fix an issue with the controller ignoring value setting when a GPIO is in input mode - slightly refactor gpio_name_to_desc()
2020-03-25tools: gpio: Fix typo in gpio-utilsMykyta Poturai
Replace COMSUMER with proper CONSUMER Signed-off-by: Mykyta Poturai <mykyta.poturai@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25tools: gpio-hammer: Apply scripts/Lindent and retain good changesGabriel Ravier
"retain good changes" means that I left the help string split up instead of having this weird thing where it tries to merge together the last three lines and it looks **really** bad Signed-off-by: Gabriel Ravier <gabravier@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25gpiolib: gpio_name_to_desc: factor out !name checkMichał Mirosław
Since name == NULL can't ever match, move the check out of IRQ-disabled region. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25tools: gpio-hammer: fix spelling mistake: "occurences" -> "occurrences"Colin Ian King
There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25gpio: mt7621: add BGPIOF_NO_SET_ON_INPUT flagChuanhong Guo
DSET/DCLR registers only works on output pins. Add corresponding BGPIOF_NO_SET_ON_INPUT flag to bgpio_init call to fix direction_out behavior. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Tested-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25gpio: mmio: introduce BGPIOF_NO_SET_ON_INPUTChuanhong Guo
Some gpio controllers ignores pin value writing when that pin is configured as input mode. As a result, bgpio_dir_out should set pin to output before configuring pin values or gpio pin values can't be set up properly. Introduce two variants of bgpio_dir_out: bgpio_dir_out_val_first and bgpio_dir_out_dir_first, and assign direction_output according to a new flag: BGPIOF_NO_SET_ON_INPUT. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Tested-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25tools: gpio-hammer: Avoid potential overflow in mainGabriel Ravier
If '-o' was used more than 64 times in a single invocation of gpio-hammer, this could lead to an overflow of the 'lines' array. This commit fixes this by avoiding the overflow and giving a proper diagnostic back to the user Signed-off-by: Gabriel Ravier <gabravier@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25gpio: mvebu: avoid error message for optional IRQChris Packham
platform_get_irq() will generate an error message if the requested irq is not present mvebu-gpio f1010140.gpio: IRQ index 3 not found use platform_get_irq_optional() to avoid the error message being generated. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25gpio: mxs: add COMPILE_TEST support for GPIO_MXSAnson Huang
Add COMPILE_TEST support to GPIO_MXS driver for better compile testing coverage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25gpio: mxc: Add COMPILE_TEST support for GPIO_MXCAnson Huang
Add COMPILE_TEST support to GPIO_MXC driver for better compile testing coverage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25gpio: pl061: Warn when IRQ line has not been configuredAlexander Sverdlin
Existing (irq < 0) condition is always false because adev->irq has unsigned type and contains 0 in case of failed irq_of_parse_and_map(). Up to now all the mapping errors were silently ignored. Seems that repairing this check would be backwards-incompatible and might break the probe() for the implementations without IRQ support. Therefore warn the user instead. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25docs: gpio: driver.rst: don't mark literal blocks twiceMauro Carvalho Chehab
Two literal blocks there are marked with both "::" and .. code-block:: c This causes Sphinx (2.4.1) to do the wrong thing, causing lots of warnings: Documentation/driver-api/gpio/driver.rst:425: WARNING: Unexpected indentation. Documentation/driver-api/gpio/driver.rst:423: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:427: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/driver-api/gpio/driver.rst:429: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:429: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:429: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:433: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:446: WARNING: Unexpected indentation. Documentation/driver-api/gpio/driver.rst:440: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:440: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:447: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/driver-api/gpio/driver.rst:449: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/driver-api/gpio/driver.rst:462: WARNING: Unexpected indentation. Documentation/driver-api/gpio/driver.rst:460: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:462: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:465: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/driver-api/gpio/driver.rst:467: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:467: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:467: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:471: WARNING: Inline emphasis start-string without end-string. Documentation/driver-api/gpio/driver.rst:478: WARNING: Inline emphasis start-string without end-string. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25gpio: uapi: Improve phrasing around arrays representing empty stringsJonathan Neuschäfer
Character arrays can be considered empty strings (if they are immediately terminated), but they cannot be NULL. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-20gpio: Move devres calls to devres fileLinus Walleij
These two devres functions devm_gpiochip_[add|remove]() were in the wrong file. They should be in gpiolib-devres.c not gpiolib.c. Link: https://lore.kernel.org/r/20200313081522.35143-1-linus.walleij@linaro.org Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09Merge branch 'ib-omap-block-idle' into develLinus Walleij
2020-03-09Revert "gpio: omap: Fix lost edge wake-up interrupts"Tony Lindgren
This reverts commit a522f1d0c381c42f3ace13b8bbeeccabdd6d2e5c. With cpu_pm handling fixed for omaps, and with gpio-omap now returning notify error on pending interrupts, we can drop the old workaround for seeing if there may be pending edge interrupts. Depends-on: ARM: OMAP2+: Handle errors for cpu_pm Depends-on: gpio: omap: Block idle on pending gpio interrupts Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200304225433.37336-4-tony@atomide.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09gpio: omap: Block idle on pending gpio interruptsTony Lindgren
With the SoC cpuidle handling fixed for cpu_pm, we can now start to return NOTIFY_BAD if there there are pending gpio interrupts. This way the deeper SoC idle states can get blocked, and gpio latency is improved in some cases. Note that this will not help with the latency if the SoC has already entered a deeper idle state. Note that this patch depends on cpu_pm properly handling the errors returned by notifiers. For omap variants, this is fixed with patch "ARM: OMAP2+: Handle errors for cpu_pm". Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200304225433.37336-3-tony@atomide.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09ARM: OMAP2+: Handle errors for cpu_pmTony Lindgren
We need to check for errors when calling cpu_pm_enter() and cpu_cluster_pm_enter(). And we need to bail out on errors as otherwise we can enter a deeper idle state when not desired. I'm not aware of the lack of error handling causing issues yet, but we need this at least for blocking deeper idle states when a GPIO instance has pending interrupts. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200304225433.37336-2-tony@atomide.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09gpio: add driver for Mellanox BlueField 2 GPIO controllerAsmaa Mnebhi
This patch adds support for the GPIO controller used by Mellanox BlueField 2 SOCs. Signed-off-by: Asmaa Mnebhi <Asmaa@mellanox.com> Link: https://lore.kernel.org/r/1680de9eb6d2b8855228dde9a2dd065f0dcbe1fb.1583182325.git.Asmaa@mellanox.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-03Merge tag 'gpio-updates-for-v5.7-part2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.7 part 2 - replace z zero-length array with flexible-array member in gpio-uniphier - make naming of variables consistent in uapi line event code - fix the behavior of line watch/unwatch ioctl()
2020-03-03gpiolib: Fix inverted check in gpiochip_remove()Geert Uytterhoeven
The optimization to check for requested lines actually optimized for the uncomon error case, where one of the GPIO lines is still in use. Hence the error message must be printed when the loop is terminated early, not when it went through all available GPIO lines. Fixes: 869233f81337bfb3 ("gpiolib: Optimize gpiochip_remove() when check for requested line") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200302082448.11795-1-geert+renesas@glider.be Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-02gpiolib: fix bitmap operations related to line event watchingBartosz Golaszewski
When operating on the bits of watched_lines bitmap, we're using desc_to_gpio() which returns the GPIO number from the global numberspace. This leads to all sorts of memory corruptions and invalid behavior. We should switch to using gpio_chip_hwgpio() instead. Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info") Reported-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Kent Gibson <warthog618@gmail.com>
2020-03-02gpiolib: fix unwatch ioctl()Kent Gibson
Fix the field having a bit cleared by the unwatch ioctl(). Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info") Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-02gpiolib: Rename 'event' to 'ge' to be consistent with other useAndy Shevchenko
Rename 'event' to 'ge' to be consistent with other use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-02gpio: uniphier: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertenly introduced[3] to the codebase from now on. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-02-28gpiolib: Optimize gpiochip_remove() when check for requested lineAndy Shevchenko
Here are the following optimizations have been done: - break the loop after first found requested line - due to above, drop redundant boolean variable - replace open coded variant of gpiochip_is_requested() - due to above, drop redundant pointer to struct gpio_desc - use 'unsigned int' instead of 'unsigned' for loop counter Note, pointer to struct gpio_chip followed by pointer to struct gpio_device is still valid, back link is not. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200225114725.839-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21gpio: of: Add DT overlay support for GPIO hogsGeert Uytterhoeven
As GPIO hogs are configured at GPIO controller initialization time, adding/removing GPIO hogs in DT overlays does not work. Add support for GPIO hogs described in DT overlays by registering an OF reconfiguration notifier, to handle the addition and removal of GPIO hog subnodes to/from a GPIO controller device node. Note that when a GPIO hog device node is being removed, its "gpios" properties is no longer available, so we have to keep track of which node a hog belongs to, which is done by adding a pointer to the hog's device node to struct gpio_desc. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200220130149.26283-3-geert+renesas@glider.be Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21gpio: of: Extract of_gpiochip_add_hog()Geert Uytterhoeven
Extract the code to add all GPIO hogs of a gpio-hog node into its own function, so it can be reused. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200220130149.26283-2-geert+renesas@glider.be Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21gpio: Switch timestamps to ktime_get_ns()Linus Walleij
The existing use of ktime_get_real_ns() in the timestamps from the GPIO events is dubious. We have had several discussions about this timestamp, and it is unclear whether userspace has ever taken into account that a timestamp from ktime_get_real_ns() can actually move backwards in time relative the previous timetamp, and userspace is more likely to expect a monotonic counter. Background: https://lore.kernel.org/linux-gpio/CAK8P3a1Skvm48sje8FNDPLYqyz9Lf8q0qX1QETWtyZTxuX4k1g@mail.gmail.com/ https://marc.info/?l=linux-gpio&m=151661955709074&w=2 The change is ABI incompatible, but incompatible in a way that is IMO more likely to fix future bugs rather than break current userspace. To the best of my knowledge all userspace expects a monotonic timestamp and users are just lucky that they very seldom move backwards in time. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21gpiolib: use gpiochip_get_desc() where applicableBartosz Golaszewski
Whenever retrieving a descriptor from a gpiochip: use the provided helper which checks for errors. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200219094702.6463-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21gpio: siox: use raw spinlock for irq related lockingUwe Kleine-König
All the irq related callbacks are called with the (raw) spinlock desc->lock being held. So the lock here must be raw as well. Also irqs were already disabled by the caller for the irq chip callbacks, so the non-irq variants of spin_lock must be used there. Fixes: be8c8facc707 ("gpio: new driver to work with a 8x12 siox") Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20200211135121.15752-1-uwe@kleine-koenig.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-20gpio: mockup: coding-style fixBartosz Golaszewski
The indentation is wrong in gpio_mockup_apply_pull(). This patch makes the code more readable. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200210155059.29609-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-20gpio: rcar: Fix typo in commentAshish Chavan
"Positive" is spelled incorrectly as "Postive" in comment fix this. Signed-off-by: Ashish Chavan <ashish.gschavan@gmail.com> Link: https://lore.kernel.org/r/20200209095600.16394-1-ashish.gschavan@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-13Merge tag 'gpio-updates-for-v5.7-part1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.7 part 1 - make irqs optional in gpio-pxa - improve the logic behind the get() and set() callbacks in gpio-wcd934x - add new kfifo helpers (acked by kfifo maintainer) - rework the locking mechanism for lineevent kfifo - implement a new ioctl() for watching changes on GPIO lines
2020-02-12tools: gpio: implement gpio-watchBartosz Golaszewski
Add a simple program that allows to test the new LINECHANGED_FD ioctl(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-02-12gpiolib: add new ioctl() for monitoring changes in line infoBartosz Golaszewski
Currently there is no way for user-space to be informed about changes in status of GPIO lines e.g. when someone else requests the line or its config changes. We can only periodically re-read the line-info. This is fine for simple one-off user-space tools, but any daemon that provides a centralized access to GPIO chips would benefit hugely from an event driven line info synchronization. This patch adds a new ioctl() that allows user-space processes to reuse the file descriptor associated with the character device for watching any changes in line properties. Every such event contains the updated line information. Currently the events are generated on three types of status changes: when a line is requested, when it's released and when its config is changed. The first two are self-explanatory. For the third one: this will only happen when another user-space process calls the new SET_CONFIG ioctl() as any changes that can happen from within the kernel (i.e. set_transitory() or set_debounce()) are of no interest to user-space. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-12gpiolib: provide a dedicated function for setting lineinfoBartosz Golaszewski
We'll soon be filling out the gpioline_info structure in multiple places. Add a separate function that given a gpio_desc sets all relevant fields. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-02-12gpiolib: emit a debug message when adding events to a full kfifoBartosz Golaszewski
Currently if the line-event kfifo is full, we just silently drop any new events. Add a ratelimited debug message so that we at least have some trace in the kernel log of event overflow. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-02-12gpiolib: rework the locking mechanism for lineevent kfifoBartosz Golaszewski
The read_lock mutex is supposed to prevent collisions between reading and writing to the line event kfifo but it's actually only taken when the events are being read from it. Drop the mutex entirely and reuse the spinlock made available to us in the waitqueue struct. Take the lock whenever the fifo is modified or inspected. Drop the call to kfifo_to_user() and instead first extract the new element from kfifo when the lock is taken and only then pass it on to the user after the spinlock is released. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-02-12kfifo: provide kfifo_is_empty_spinlocked()Bartosz Golaszewski
Provide two spinlocked versions of kfifo_is_empty() to be used with spinlocked variants of kfifo_in() and kfifo_out(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Stefani Seibold <stefani@seibold.net>
2020-02-12kfifo: provide noirqsave variants of spinlocked in and out helpersBartosz Golaszewski
Provide variants of spinlocked kfifo_in() and kfifo_out() routines which don't disable interrupts. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Stefani Seibold <stefani@seibold.net>
2020-02-10gpio: Avoid kernel.h inclusion where it's possibleAndy Shevchenko
Inclusion of kernel.h increases the mess with the header dependencies. Avoid kernel.h inclusion where it's possible. Besides that, clean up a bit other inclusions inside GPIO subsystem headers. It includes: - removal pin control bits (forward declaration and header) from linux/gpio.h - removal of.h from asm-generic/gpio.h - use of explicit headers in gpio/consumer.h - add FIXME note with regard to gpio.h inclusion in of_gpio,h Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200205134336.20197-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 08:56:19 +0000