summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-04mt76: testmode: switch ib and wb rssi to array type for per-antenna reportShayne Chen
Change ib_rssi and wb_rssi into array type, since they could be reported by per-antenna. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt76u: use dedicated thread for status workLorenzo Bianconi
Split tx and status path in mt76-usb module relying on mt76 workers APIs Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt76u: rely on woker APIs for rx workLorenzo Bianconi
In order to improve parallelism, convert rx path in mt76-usb module to mt76 workers APIs Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: run key configuration in mt7615_set_key for usb/sdio devicesLorenzo Bianconi
Since rate configuration is run holding dev mutex, we can run key configuration in mt7615_set_key for usb/sdio devices avoiding to schedule the workqueue Tested-by: Tested-by: YN Chen <yn.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: fix tkip configuration for mt7615/7663 devicesLorenzo Bianconi
Fix Tx-Rx MIC overwrite during TKIP hw key configuration Fixes: 01cfc1b45421 ("mt76: mt7615: add BIP_CMAC_128 cipher support") Tested-by: YN Chen <yn.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: switch to wep sw crypto for mt7615/mt7915Lorenzo Bianconi
Switch to wep sw crypto for mt7615/mt7915 since wtbl require a sta reference and wep key is not pairwise Tested-by: YN Chen <yn.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7663s: introduce WoW support via GPIOSean Wang
SDIO-based WiFi would rely on an additional GPIO pin to wake up the host. Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move mt76_mcu_send_firmware in common moduleLorenzo Bianconi
Move mt76_mcu_send_firmware routine in common code since it is actually shared between mt7615, mt7663, mt7603 and mt7915 devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7603: add additional EEPROM chip IDDavid Bauer
Some newer MT7628 based routers (notably the TP-Link Archer C50 v4) are shipped with a chip-id of 0x7600 in the on-flash EEPROM. Add this as a possible valid ID. Ref: https://bugs.openwrt.org/index.php?do=details&task_id=2781 Suggested-by: Ron Asimi <ron.asimi@gmail.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: fix memory leak if device probing failsLorenzo Bianconi
Run mt76_free_device instead of ieee80211_free_hw if device probing fails in order to remove the already allocated mt76 workqueue Fixes: a86f1d01f5ce5 ("mt76: move mt76 workqueue in common code") Fixes: f1d962369d568 ("mt76: mt7915: implement HE per-rate tx power support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix sparse warning cast from restricted __le16Ryder Lee
drivers/net/wireless/mediatek/mt76/mt7915/init.c:339:26: sparse: sparse: cast from restricted __le16 Fixes: 00b2e16e0063 ("mt76: mt7915: add TxBF capabilities") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: dma: fix possible deadlock running mt76_dma_cleanupLorenzo Bianconi
Fix the following possible deadlock reported by lockdep disabling BH running mt76_free_pending_txwi() ================================ WARNING: inconsistent lock state 5.9.0-rc6 #14 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rmmod/1227 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888156a83530 (&dev->lock#2){+.?.}-{2:2}, at: mt76_dma_cleanup+0x125/0x150 [mt76] {IN-SOFTIRQ-W} state was registered at: __lock_acquire+0x20c/0x6b0 lock_acquire+0x9d/0x220 _raw_spin_lock+0x2c/0x70 mt76_dma_tx_cleanup+0xc7/0x200 [mt76] mt76x02_poll_tx+0x31/0xb0 [mt76x02_lib] napi_poll+0x3a/0x100 net_rx_action+0xa8/0x200 __do_softirq+0xc4/0x430 asm_call_on_stack+0xf/0x20 do_softirq_own_stack+0x49/0x60 irq_exit_rcu+0x9a/0xd0 common_interrupt+0xa4/0x190 asm_common_interrupt+0x1e/0x40 irq event stamp: 9915 hardirqs last enabled at (9915): [<ffffffff8124e286>] __free_pages_ok+0x336/0x3b0 hardirqs last disabled at (9914): [<ffffffff8124e24e>] __free_pages_ok+0x2fe/0x3b0 softirqs last enabled at (9912): [<ffffffffa03aa672>] mt76_dma_rx_cleanup+0xa2/0x120 [mt76] softirqs last disabled at (9846): [<ffffffffa03aa5ea>] mt76_dma_rx_cleanup+0x1a/0x120 [mt76] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dev->lock#2); <Interrupt> lock(&dev->lock#2); *** DEADLOCK *** 1 lock held by rmmod/1227: #0: ffff88815b5eb240 (&dev->mutex){....}-{3:3}, at: driver_detach+0xb5/0x110 stack backtrace: CPU: 1 PID: 1227 Comm: rmmod Kdump: loaded Not tainted 5.9.0-rc6-wdn-src+ #14 Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009 Call Trace: dump_stack+0x77/0xa0 mark_lock_irq.cold+0x15/0x39 mark_lock+0x1fc/0x500 mark_usage+0xc7/0x140 __lock_acquire+0x20c/0x6b0 ? find_held_lock+0x2b/0x80 ? sched_clock_cpu+0xc/0xb0 lock_acquire+0x9d/0x220 ? mt76_dma_cleanup+0x125/0x150 [mt76] _raw_spin_lock+0x2c/0x70 ? mt76_dma_cleanup+0x125/0x150 [mt76] mt76_dma_cleanup+0x125/0x150 [mt76] mt76x2_cleanup+0x5a/0x70 [mt76x2e] mt76x2e_remove+0x18/0x30 [mt76x2e] pci_device_remove+0x36/0xa0 __device_release_driver+0x16c/0x220 driver_detach+0xcf/0x110 bus_remove_driver+0x56/0xca pci_unregister_driver+0x36/0x80 __do_sys_delete_module.constprop.0+0x127/0x200 ? syscall_enter_from_user_mode+0x1d/0x50 ? trace_hardirqs_on+0x1c/0xe0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7ff0da54e36b Code: 73 01 c3 48 8b 0d 2d 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 0a 0c 00 f7 d8 64 89 01 48 Fixes: dd57a95cfddc ("mt76: move txwi handling code to dma.c, since it is mmio specific") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: set fops_tx_stats.owner to THIS_MODULETaehee Yoo
If THIS_MODULE is not set, the module would be removed while debugfs is being used. It eventually makes kernel panic. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: rename mt7915_mcu_get_rate_info to mt7915_mcu_get_tx_rateRyder Lee
Avoid confusion with rx rate query function. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: update ppe thresholdRyder Lee
Update ppe_thresh capability to sync SDK setting. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: set fops_sta_stats.owner to THIS_MODULETaehee Yoo
If THIS_MODULE is not set, the module would be removed while debugfs is being used. It eventually makes kernel panic. Fixes: ec9742a8f38e ("mt76: mt7915: add .sta_add_debugfs support") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04wireless: mt76: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: sdio: get rid of sched.lockLorenzo Bianconi
sched quota is now updated in mt7663s_txrx_worker so there is no more need of sched.lock mutex Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7663s: fix a possible ple quota underflowLorenzo Bianconi
Properly account current consumed ple quota in mt7663s_tx_pick_quota routine and avoid possible underflow. Fixes: 6ef2d665f64d ("mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7663s: get rid of mt7663s_sta_addLorenzo Bianconi
Get rid of mt7663s_sta_add routine and rely on mt7615_mac_sta_add since sched quota is already initialized in mt7663s_mcu_init_sched routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: introduce quota debugfs node for mt7663sLorenzo Bianconi
Add sched_quota debugfs node for mt7663s. Scheduling quota stats are useful for debugging Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: enable beacon filtering by default for offload fwLorenzo Bianconi
In order to reduce cpu cycles, enable hw beacon filter by default if the device is running offload fw with sta only interfaces. Disable runtime pm for multi-vif scenario. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: add back the SUPPORTS_REORDERING_BUFFER flagFelix Fietkau
It was accidentally dropped while adding multiple wiphy support Fixes fast-rx support and avoids handling reordering in both mac80211 and the driver Cc: stable@vger.kernel.org Fixes: c89d36254155 ("mt76: add function for allocating an extra wiphy") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: query station rx rate from firmwareFelix Fietkau
When per-packet rate reporting is enabled, the hardware can get stuck under some conditions. It self-recovers quickly, but in practice this leads to reduced performance. In order to avoid running into this issue, disable per-packet rate reporting by default and query the rx rate from firmware instead, unless monitor mode is enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: move eeprom parsing out of mt7915_mcu_parse_responseFelix Fietkau
Use the new mt76_mcu_send_and_get_msg function Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: implement functions to get the response skb for MCU callsFelix Fietkau
Can be used by the caller to get the response data directly instead of using the hack of storing the result in internal data structures from .mcu_parse_response Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7603: switch to .mcu_skb_send_msgFelix Fietkau
Reduces code duplication Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: make mcu_ops->mcu_send_msg optionalFelix Fietkau
Remove it from mt7615 and mt7915 and implement it in core code instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move waiting and locking out of mcu_ops->mcu_skb_send_msgFelix Fietkau
This removes some code duplication and prepares the code for making the MCU API more flexible Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move mcu timeout handling to .mcu_parse_responseFelix Fietkau
Preparation for further cleanup Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: implement .mcu_parse_response in struct mt76_mcu_opsFelix Fietkau
Do not free skb inside that function Preparation for further cleanup Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: rename __mt76_mcu_skb_send_msg to mt76_mcu_skb_send_msgFelix Fietkau
Preparation for further cleanup Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: rename __mt76_mcu_send_msg to mt76_mcu_send_msgFelix Fietkau
Preparation for further cleanup Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: disable OFDMA/MU-MIMO ULFelix Fietkau
The feature is not ready in firmware yet, and it leads to hangs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix DRR sta bss group indexFelix Fietkau
The firmware/hardware supports only 16 entries. Trying to use more can lead to timeouts on some firmware versions Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: use napi_consume_skb to bulk-free tx skbsFelix Fietkau
Slightly improves performance Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix processing txfree eventsFelix Fietkau
In the MT7915 info, the fields for the WLAN index / queue overlap with the token id, and the MT_TX_FREE_PAIR bit indicates, which one is present. If MT_TX_FREE_PAIR is set, skip processing the token index, since the data will not be valid. This fixes accidentally freeing tokens which are still in use by the hardware with a wrong station pointer. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: support 32 station interfacesFelix Fietkau
When looking for a MAC address slot, start by using main BSSID slots 1-3, afterwards use 16 repeater mode BSSID slots, then start using the slots usually used for AP mode. This search order should prevent unnecessary conflicts with AP mode interfaces on the same PHY Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: do not set NEEDS_UNIQUE_STA_ADDR for 7615 and 7915Felix Fietkau
The newer chipsets can deal with the same STA on multiple interfaces Preparation for supporting more station interfaces Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: add debugfs knob for setting extended local mac addressesFelix Fietkau
This is primarily for testing and can be used in combination with monitor mode to make the card respond to packets sent to a specific MAC address. For now this is only exposed as a debug/testing feature, later on the approach might be used to support more concurrent station interfaces Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: use ieee80211_rx_list to pass frames to the network stack as a batchFelix Fietkau
Improves icache footprint Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add encap offload for 4-address mode stationsFelix Fietkau
Enable MWDS mode in firmware as well and fix txp->rept_wds_wcid for wcid >= 255 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add 802.11 encap offload supportFelix Fietkau
It is currently limited to 3-address mode AP and STA interfaces Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: sdio: convert {status/net}_work to mt76_workerLorenzo Bianconi
In order to improve driver throughput, convert status_work and net_work to mt76 worker APIs. Remove txrx_wq sdio workqueue since it is no longer used Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7663s: disable interrupt during txrx_worker processingLorenzo Bianconi
In order to reduce sdio bus contention, disable interrupts during txrx_worker processing Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7663s: convert txrx_work to mt76_workerLorenzo Bianconi
In order to improve driver throughput, convert txrx_work to mt76 worker threads APIs. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7663s: move tx/rx processing in the same txrx workqueueLorenzo Bianconi
Move mt7663 tx and rx processing in the same workqueue in order to reduce jitter that can hit tcp performances. This is a preliminary patch to switch to mt76 workers APIs Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: retry if mt7615_mcu_init returns -EAGAINChuanhong Guo
mt7615_load_patch in mt7615/mcu.c sometimes fails with: mt7622-wmac 18000000.wmac: Failed to get patch semaphore and returns -EAGAIN. But this error is returned all the way up to mt7615_init_work with no actual retrial performed, leaving a broken wireless phy. Wait a bit and retry for up to 10 times before giving up. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix VHT LDPC capabilityRyder Lee
The MCU field should contain a boolean 0/1, not the flag itself. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: measure channel noise and report it via surveyRyder Lee
Read per-stream measurements every 100 ms and build a simple moving average. Tested-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 07:34:26 +0000