summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-24ARM: shmobile: Remove EMEV2 use of <mach/hardware.h>Magnus Damm
Remove unused <mach/hardware.h> on EMEV2. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARM: shmobile: Remove sh7372 use of <mach/hardware.h>Magnus Damm
Remove unused <mach/hardware.h> on sh7372. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARM: shmobile: Remove sh73a0 use of <mach/hardware.h>Magnus Damm
Remove unused <mach/hardware.h> on sh73a0. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARCH: ARM: shmobile: Remove ag5evm board supportSimon Horman
Remove support for the sh73a0 based ag5evm board. The sh73a0 SoC is continued to be supported using the kzm9g board. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24ARCH: ARM: shmobile: Remove kota2 board supportSimon Horman
Remove support for the sh73a0 based kota2 board. The sh73a0 SoC is continued to be supported using the kzm9g board. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24Merge branches 'tpu-pwm', 'backlight' and 'soc' into cleanup2-baseSimon Horman
2013-07-22leds: Remove leds-renesas-tpu driverLaurent Pinchart
The driver is superseded by the generic pwm-renesas-tpu driver used with leds-pwm. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-19ARM: shmobile: sh73a0: Remove all GPIOsLaurent Pinchart
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-19ARM: shmobile: kota2: Use leds-pwm + pwm-rmobLaurent Pinchart
Instead of using the LED-specific TPU PWM driver, switch to the generic TPU PWM driver with leds-pwm. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-19ARM: shmobile: armadillo800eva: Add backlight supportLaurent Pinchart
The flat panel backlight on the Armadillo 800 EVA board is driven by the TPU PWM output. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Setup r8a7790 arch timer based on MD pinsMagnus Damm
Update the r8a7790 arch timer setup code to configure the frequency dynamically at boot time. This means that the arch timer driver will be able to detect a timer frequency that has been calculated based on the MD pins instead of a fixed and potentially incorrect 13 MHz. With this patch applied the Linux kernel will correctly support the r8a7790 Lager board that uses a 20 Mhz EXTAL. The arch timer will operate on 10 MHz and the Linux arch timer driver will be correctly configured to use 10 MHz. Without this patch the 20 MHz EXTAL will be used to drive the arch timer at 10 MHz, but the Linux arch timer driver will believe it is counting at 13 Mhz. Reported-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Introduce r8a7790_read_mode_pins()Magnus Damm
Break out the r8a7790 boot mode code into a separate function so it can be shared by multiple users. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7740: add MMCIF DMA definitionsGuennadi Liakhovetski
Add DMA channel slave IDs and configuration entries for the r8a7740 MMCIF controller. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Disconnect EMEV2 SMP code from clocksMagnus Damm
Update the EMEV2 SMP code to access the SMU directly instead of relying on help from the legacy clock code. This change moves us one step closer to common clocks. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Make r8a73a4 Arch timer optionalMagnus Damm
Update the r8a73a4 code to allow using other timers than Arch timer for clock event Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Add r8a73a4 CMT10 clock eventMagnus Damm
Add clock event support for CMT1 timer channel 0 to the r8a73a4 SoC code. The CMT is used together with a 32KHz clock in this case. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Make r8a7790 Arch timer optionalMagnus Damm
Update the r8a7790 code to allow using other timers than Arch timer for clock events. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Add r8a7790 CMT00 clock eventMagnus Damm
Add clock event support for CMT0 timer channel 0 to the r8a7790 SoC code. On most ARM mach-shmobile the CMT is hooked up to a 32KHz clock but on r8a7790 a 31.7KHz clock is instead used. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Sort r8a7790 MSTP entriesMagnus Damm
The r8a7790 MSTP bits should be kept sorted in the same way as on other mach-shmobile SoCs. Move the HSCIF and thermal bits to clean up the current state. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: add clocks for I2C controllersGuennadi Liakhovetski
r8a73a4 SoCs have numerous I2C controllers, of which 9 are compatible with the i2c-sh_mobile.c driver. This patch adds clock definitions for them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: add Z2 clock supportGuennadi Liakhovetski
The Z2 clock on r8a73a4 is used to clock the 4 Cortex A7 cores on the SoC. Add a definition for this clock to later use it from the arm_big_little CPUFreq driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: safeguard against wrong clk_set_rate() usesGuennadi Liakhovetski
clk_set_rate() should only be called with exact rates, returned by clk_round_rate(). However, it is still good to verify, that the value, passed to clock's .set_rate() method is at least valid. This patch adds such a check for the Z-clock on r8a73a4. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: implement CPU clock scaling for CPUFreqGuennadi Liakhovetski
This patch adds support for the Z-clock on r8a73a4 SoCs, which is driving the Cortex A15 core, and a "cpufreq-cpu0" platform device. Adding an "operating-points" property to the CPU0 DT node and a regulator, this patch allows platforms to use the generic cpufreq-cpu0 driver to use SoC's DVFS capabilities. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: wait for completion when kicking the clockGuennadi Liakhovetski
To reconfigure clocks, controlled by FRQCRA and FRQCRB, a kick bit has to be set and to make sure the setting has taken effect, it has to be read back repeatedly until it is cleared by the hardware. This patch adds the waiting part, that was missing until now. Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7790: add thermal driver supportSimon Horman
The current temperature may be read using: cat /sys/class/thermal/thermal_zone0/temp Based on similar work for the r8a73a4 by Kuninori Morimoto. Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7790: add clocks for thermalSimon Horman
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Add SMSC ethernet chip to KZM9D DT referenceMagnus Damm
Add support for the SMSC ethernet controller found on the KZM9D board to the KZM9D DT Reference code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: KZM9D DT reference implementationMagnus Damm
Add a DT reference implementation for the KZM9D board. Only DT devices are used in this case. UART, STI, GPIO and SMP / GIC are all provided by emev2.dtsi. There is still a board specific C file used for enabling legacy SH clocks. This file will be removed after we have moved over to common clocks. Signed-off-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: Do not include trailing blank line in board-kzm9d-reference.c ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7790: add MMCIF and SDHI DT templatesGuennadi Liakhovetski
This adds DT templates for all MMCIF and SDHI controllers on r8a7790. They are added with status="disabled". To use them platform-specific DTs have to enable the required ones. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: add MMCIF and SDHI DT templatesGuennadi Liakhovetski
This adds DT templates for all MMCIF and SDHI controllers on r8a73a4. They are added with status="disabled". To use them platform-specific DTs have to enable the required ones. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: EMEV2 map_io updateMagnus Damm
Update the EMEV2 struct map_desc to exclude the SMU and also include the ->map_io() callback in the DT version of EMEV2 board support. The EMEV2 SMP code can these days perform ioremap() early on without the SMU information in the io_desc[]. To correctly support SMP in case of DT-only board support then the ->map_io() callback is needed. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Use DT for SMP on EMEV2 and KZM9DMagnus Damm
Rework the EMEV2 SMP code to rely on DT for CPU information instead of reading out number of CPU cores from the SCU. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Use DT for GIC on EMEV2 and KZM9DMagnus Damm
Remove the C version of the EMEV2 GIC setup code, instead rely on GIC information provided by DT. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Add GIO to EMEV2 dtsiMagnus Damm
Add GIO0->GIO4 device nodes to the EMEV2 dtsi file. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Update KZM9D dts command lineMagnus Damm
Update the KZM9D DTS command line to remove following cruft: - console=tty0 - no graphic support upstream anyway - earlyprintk= - not supported by the 8250-em driver anyway - mem= - this is provided via DT anyway Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: ape6evm: add CPUFreq supportGuennadi Liakhovetski
This patch adds OPPs to the CA15 DT node and a max8973 DT node to support clock and voltage scaling, using the cpufreq-cpu0 CPUFreq driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: add I2C controller DT nodesGuennadi Liakhovetski
Add Device Tree nodes for the 9 I2C controllers on r8a73a4, compatible with the i2c-sh_mobile.c driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: mach-shmobile: ag5evm: Use bd6107 backlight driverLaurent Pinchart
Replace the backlight callback with a bd6107 backlight platform device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17sh: kfr2r09: Use lv5207lp backlightLaurent Pinchart
Replace the backlight callback with a lv5207lp backlight platform device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17sh: ecovec24: Use gpio-backlightLaurent Pinchart
Replace the backlight callback with a gpio-backlight platform device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: mach-shmobile: mackerel: Use gpio-backlightLaurent Pinchart
Replace the backlight callback with a gpio-backlight platform device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused mach/dma.hMagnus Damm
Remove mach-shmobile mach/dma.h since it only seems to be used on non-mach-shmobile platforms. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a7778: remove r8a7778_init_irq()Kuninori Morimoto
This patch removes r8a7778_init_irq(), since no-one is using it. And now, there is no reason to have r8a7778_init_irq_common(). r8a7778_init_irq_dt() includes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Fix EMEV2 clock comment typoMagnus Damm
Update the STI timer frequency comment to 32.768 kHz to fix 37 kHz typo. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Make EMEV2 platform devices more compactMagnus Damm
Convert the EMEV2 SoC device setup code from using very verbose resources and static platform devices to the same style as more recent boards. This reduces the size of the code. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused EMEV2/KZM9D early consoleMagnus Damm
Remove EMEV2 early console code from KZM9D and instead rely on console setup during regular platform device probe time. This makes the DT code and the KZM9D board support behave the same. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove redundant r8a7790 callbackMagnus Damm
Replace the SoC-specific callback init_machine() with a NULL to use the default code. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused sh73a0 auxdata tableMagnus Damm
Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused sh7372 auxdata tableMagnus Damm
Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: Remove unused r8a7779 auxdata tableMagnus Damm
Pass NULL to of_platform_populate instead of passing an empty list. This cleans up the code and reduces the number of lines. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 00:46:27 +0000