summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-17mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35Wolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Marc Reilly <marc@cpdesign.com.au> Tested-by: Eric Benard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: sdhci-esdhc: broken card detection is not a default quirkWolfram Sang
It can be worked around using a GPIO which will be done for i.MX later. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Tested-by: Marc Reilly <marc@cpdesign.com.au> Tested-by: Eric Benard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35Wolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Marc Reilly <marc@cpdesign.com.au> Tested-by: Eric Benard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: msm_sdcc: remove needless cache flush after dma_unmap_sg()Linus Walleij
dma_unmap_sg() already flushes the cache, I don't get what this code is doing here. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-16mmc: sh_mmcif: support aggressive clock gatingGuennadi Liakhovetski
To support MMC aggressive clock gating the driver has to stop the interface clock when the .set_ios() method is called with .clock == 0. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-16mmc: check if mmc cards < 2GB do sector addressingPhilip Rakity
Some TOSHIBA MMC cards only support sector addressing even though the size is < 2GB. According to JEDEC Spec JESD84-A441-1 the ocr register (bits 30, 29) determine byte/sector mode. Use them. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-16mmc: core: comment on why sdio_reset is done at init timePhilip Rakity
sdio_reset sends a CMD52 to reset the sdio card. This is highly recommended for sdio cards being reinitialized. Since we do not know if the card is being reinitialized we just send the command. SD/eMMC cards are supposed to ignore the CMD before the CMD0. Document why we are doing this. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: dw_mmc: support DDR modeJaehoon Chung
This patch adds DDR mode support to dw_mmc. If we set any bit in UHS_REG bit[16:31], the card of that slot is supported for DDR mode. For example, if UHS_REG[16] is set, card number 0 is DDR mode. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: via-sdmmc: Remove set-but-unused variable.Chris Ball
drivers/mmc/host/via-sdmmc.c: In function ‘via_reset_pcictrl’: drivers/mmc/host/via-sdmmc.c:805:8: warning: variable ‘addrbase’ set but not used [-Wunused-but-set-variable] Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Harald Welte <HaraldWelte@viatech.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-03-15mmc: cb710: Return err value in cb710_wait_while_busy()Chris Ball
Fixes: drivers/mmc/host/cb710-mmc.c: In function ‘cb710_wait_while_busy’: drivers/mmc/host/cb710-mmc.c:182:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] Signed-off-by: Chris Ball <cjb@laptop.org> Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-03-15mmc: sdhci-pci: Remove set-but-unused variable.Chris Ball
drivers/mmc/host/sdhci-pci.c: In function ‘sdhci_pci_probe_slot’: drivers/mmc/host/sdhci-pci.c:913:18: warning: variable ‘addr’ set but not used [-Wunused-but-set-variable] Signed-off-by: Chris Ball <cjb@laptop.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-03-15mmc: mxs-mmc: add mmc host driver for i.MX23/28Shawn Guo
This adds the mmc host driver for Freescale MXS-based SoC i.MX23/28. The driver calls into mxs-dma via generic dmaengine api for both pio and data transfer. Thanks Chris Ball for the indentation patch. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: sdhci-tegra: free irq on error and removeWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: mxcmmc: use dmaengine APISascha Hauer
This switches the mxcmmc driver to use the dmaengine API. Unlike the old one this one is always present in the tree, even if no DMA is implemented, hence we can remove all the #ifdefs in from the driver. The driver automatically switches to PIO mode if no DMA support or no suitable channel is available. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: dw_mmc: support 8-bit buswidthJaehoon Chung
This patch adds support for 8-bit buswidth. dw_mmc can use 8-bit buswidth and set to CTYPE_8BIT in card-type register. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: dw_mmc: modify quirks bit-shift controlJaehoon Chung
If we need some quirks, maybe add quirks in future But now, quirks value set to integer..later we should be confused.. So I think that need bit-shift control. And If we need not any quirks, we didn't set anything.. (Need not DW_MCI_QUIRK_NONE) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: tmio_mmc: use dmaengine helpers, drop submit checkLinus Walleij
Use the new dmaengine helper functions, and drop the error check on the returned cookier from the dmaengine - we recently established that this is really not allowed to fail. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: tmio_mmc: drop dma_sglen state variableLinus Walleij
This variable doesn't seem to be used for anything after the other patches so just drop it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: tmio_mmc: unmap with the proper sglenLinus Walleij
According to the DMA-API you shall unmap the sglists with the same sglist length as passed into the mapping function, not the returned value from the mapping function. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: tmio_mmc: map DMA buffers on the DMA engine deviceLinus Walleij
As established for the MMCI, it is proper to map the DMA buffers on the DMA engine which is the one actually performing the DMA. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: sh_mmcif: use dmaengine helpers, drop submit checkLinus Walleij
Use the new dmaengine helper functions, and drop the error check on the returned cookier from the dmaengine - we recently established that this is really not allowed to fail. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: sh_mmcif: rename and retype activity variableLinus Walleij
The host_sglen is now actually used to keep track of whether DMA is active or not, so rename and retype it to bool. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: sh_mmcif: unmap with the proper sglenLinus Walleij
According to the DMA-API you shall unmap the sglists with the same sglist length as passed into the mapping function, not the returned value from the mapping function. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: sh_mmcif: map DMA buffers on the DMA engine deviceLinus Walleij
As established for the MMCI, it is proper to map the DMA buffers on the DMA engine which is the one actually performing the DMA. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: atmel-mci: use dmaengine helper functionsLinus Walleij
Use the new dmaengine helpers to make the code more readable. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: atmel-mci: conform to DMA-APILinus Walleij
Fixes the following: - It is perfectly legal for the dma_map_sg() to return fewer entries than were passed in. - Supply the returned numer of (possibly coalesced) entries to the device_pre_slave_sg() function. - Use the proper original sg_len when unmapping the sglist in the error path. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: atmel-mci: map DMA sglist on the DMA engineLinus Walleij
As established for the MMCI, it is proper to map the DMA buffers on the DMA engine which is the one actually performing the DMA. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: sdhci: Add Ricoh e823 PCI IDManoj Iyer
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: Ensure prototypes for SD API are visible in sd.cMark Brown
So we know the implementation and prototypes agree with each other. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: Improve MMC_TEST config text.Will Newton
The test file is created under debugfs, not sysfs. Also remove the unnecessary default n. Signed-off-by: Will Newton <will.newton@imgtec.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: dw_mmc: Enable low-power mode for the card clock.Will Newton
Setting this bit in the clock enable register will stop the clock when the card is in the IDLE state. Signed-off-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: dw_mmc: Run card detect tasklet during slot initialisation.Will Newton
We need to run the card detect tasklet at the end of slot initialisation as it is possible that a card has been inserted prior to boot, so we don't see an insertion interrupt and now the card is sitting there inserted but with no power to it. Signed-off-by: Neil Jones <neil.jones@imgtec.com> Signed-off-by: Will Newton <will.newton@imgtec.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: mmc_mxc: Allow selection only for the correct platformsFabio Estevam
Currently MMC_MXC driver can be selected by all i.MX devices. Restrict its use only for the appropriate processors. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: tmio_mmc: Improve readability of the output of pr_debug_status()Simon Horman
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: mmc_test: add tests to measure large sequential I/O performanceAdrian Hunter
Add two large sequential I/O performance tests: 35. Large sequential read into scattered pages 36. Large sequential write from scattered pages The tests measure transfer times for 10MiB, 100MiB, 1000MiB. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: mmc_test: add tests to measure random I/O operations per secondAdrian Hunter
Existing performance tests measure single or sequential I/O speed. Add two random I/O tests: 33. Random read performance by transfer size 34. Random write performance by transfer size Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: mmc_test: make performance test area size about 4MiBAdrian Hunter
The test area size was set to the preferred erase size but for comparison purposes it is better if it is the same size for different devices. Make it a multiple of preferred erase size that is greater than or equal to 4MiB. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: remove BROKEN_CLK_GATING quirk for wl1271Pierre Tardy
This sdio card supports having its sdio clock shutdown. It is also not using the SDIO IRQ, but rather uses a side gpio irq. Signed-off-by: Pierre Tardy <tardyp@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: add MMC_QUIRK_BROKEN_CLK_GATINGPierre Tardy
Some sdio card are not following sdio standard, and do not work when the sdio bus's clock is gated. To keep functionnality for all legacy driver, we turn this quirk on for every sdio card. Drivers needs to disable the quirk manually when someone verifies that their supported card works with clock gating. Signed-off-by: Pierre Tardy <tardyp@gmail.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: add per device quirk placeholderPierre Tardy
Some cards have quirks valid for every platforms using current platform quirk hooks leads to a lot of code and debug duplication. So we inspire a bit from what exists in PCI subsystem and do our own per vendorid/deviceid quirk. We still drop the complexity of the pci quirk system (with special section tables, and so on). That can be added later if needed. Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: put the led blinking code after clock ungatingPierre Tardy
Since mmc clock gating can also be used as a power gating tip, it's better to put the led blinking after having ungated the clock. Signed-off-by: Pierre Tardy <pierre.tardy@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: mmc_test: Only warn about not waiting for busy if it's supportedPawel Moll
If the MMC host controller does not support waiting for card signaling busy state (MMC_CAP_WAIT_WHILE_BUSY cap), there is no point in prining the relevant warning message. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: sdhci-s3c: Auto CMD12 supportKyungmin Park
Samsung SDHCI host controller supports the Auto CMD12. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: Fix the block device read only flagMarc-André Hébert
While the MMC handled the card's read only flag correctly on open, it did not setup the flag in the allocated disk structure. The consequence being that probing the /sys/class/block/mmcblkX/ro attribute always reported 0. Signed-off-by: Marc-Andre Hebert <hebert.marcandre@gmail.com> Reviewed-by: Chris Ball <cjb@laptop.org> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15mmc: export eMMC4.4 enhanced area details to sysfsChuanxiao Dong
Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-09Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] pcc-cpufreq: don't load driver if get_freq fails during init.
2011-03-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: fix CONFIG_MMC_UNSAFE_RESUME regression
2011-03-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: nd->inode is not set on the second attempt in path_walk() unfuck proc_sysctl ->d_compare() minimal fix for do_filp_open() race
2011-03-09[CPUFREQ] pcc-cpufreq: don't load driver if get_freq fails during init.Naga Chumbalkar
Return 0 on failure. This will cause the initialization of the driver to fail and prevent the driver from loading if the BIOS cannot handle the PCC interface command to "get frequency". Otherwise, the driver will load and display a very high value like "4294967274" (which is actually -EINVAL) for frequency: # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 4294967274 Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> CC: stable@kernel.org Signed-off-by: Dave Jones <davej@redhat.com>
2011-03-08nd->inode is not set on the second attempt in path_walk()Al Viro
We leave it at whatever it had been pointing to after the first link_path_walk() had failed with -ESTALE. Things do not work well after that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 06:05:24 +0000