| Age | Commit message (Collapse) | Author |
|---|
|
A number of the Rockchip-specific drivers (IOMMU, display controllers)
are now assuming that CONFIG_PM is set, and may completely misbehave
if that's not the case.
Since there is hardly any reason for this configuration option not
to be selected anyway, let's require it (in the same way Tegra already
does).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
A number of the Rockchip-specific drivers (IOMMU, display controllers)
are now assuming that CONFIG_PM is set, and may completely misbehave
if that's not the case.
Since there is hardly any reason for this configuration option not
to be selected anyway, let's require it (in the same way Tegra already
does).
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The idle-states binding documentation[1] mentions that the
'entry-method' property is required on 64-bit platforms and must be
set to "psci".
commit a13f18f59d26 ("Documentation: arm: Fix typo in the idle-states
bindings examples") attempted to fix this earlier but clearly more is
needed.
Fix the cpu-capacity.txt documentation that uses the incorrect value so
we don't get copy-paste errors like these. Clarify the language in
idle-states.txt by removing the reference to the psci bindings that
might be causing this confusion.
Finally, fix devicetrees of various boards to reflect current
documentation.
[1] Documentation/devicetree/bindings/arm/idle-states.txt (see
idle-states node)
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
into next/late
Reset controller fixes for v4.18
This tag fixes reset assertion on i.MX7 for all non-inverted reset
control bits. Currently only PCIE controller and PHY resets are used.
* tag 'reset-fixes-for-4.18' of git://git.pengutronix.de/git/pza/linux:
reset: imx7: Fix always writing bits as 0
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
next/late
Reset controller changes for v4.19, part 2
This adds a single new driver for the Amlogic Meson Audio Memory Arbiter
resets.
* tag 'reset-for-4.19-2' of git://git.pengutronix.de/git/pza/linux:
reset: meson: add meson audio arb driver
reset: meson: add dt-bindings for meson-axg audio arb
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/drivers
- add pmic wrapper support for mt6797
- pmic wrapper fix chiper init
- add support for pmic mt6351
* tag 'v4.18-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
soc: mediatek: pwrap: fix cipher init setting error
dt-bindings: pwrap: mediatek: add pwrap support for MT6797
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Exynos5440 drivers removal
The Exynos5440 (quad-core A15 with GMAC, PCIe, SATA) was targeting
server platforms but it did not make it to the market really. There are
no development boards with it and probably there are no real products
neither. The development for Exynos5440 ended in 2013 and since then
the platform is in maintenance mode.
Removing Exynos5440 makes our life slightly easier: less maintenance,
smaller code, reduced number of quirks, no need to preserve DTB
backward-compatibility.
The Device Tree sources and some of the drivers for Exynos5440 were
already removed. This removes remaining drivers.
* tag 'samsung-drivers-exynos5440-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
usb: host: exynos: Remove support for Exynos5440
clk: samsung: Remove support for Exynos5440
cpufreq: exynos: Remove support for Exynos5440
ata: ahci-platform: Remove support for Exynos5440
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
hotplug tests
Commit 7f9545aa1a91 ("arm64: smp: remove cpu and numa topology
information when hotplugging out CPU") updates the cpu topology when
the CPU is hotplugged out. However the PSCI checker code uses the
topology_core_cpumask pointers for some of the cpu hotplug testing.
Since the pointer to the core_cpumask of the first CPU in the group
is used, which when that CPU itself is hotpugged out is just set to
itself, the testing terminates after that particular CPU is tested out.
But the intention of this tests is to cover all the CPU in the group.
In order to support that, we need to stash the topology_core_cpumask
before the start of the test and use that value instead of pointer to
a cpumask which will be updated on CPU hotplug.
Fixes: 7f9545aa1a91a9a4 ("arm64: smp: remove cpu and numa topology
information when hotplugging out CPU")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers
Various updates to soc/fsl for 4.19
Moves DPAA2 DPIO driver from staging to fsl/soc
Adds multiple-pin support to QE gpio driver
* tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers
Allwinner drivers changes for 4.19
There's been work for this release cycles in both the SRAM controller
driver in order to support more SoCs, as part of our VPU work, but also to
enable the EMAC on the A64 (that needs to poke at registers within the same
register space).
Some work has been needed too to represent the bus to the display engine
controllers that all need an SRAM to be mapped to the CPU to be able to
access those controllers' registers.
* tag 'sunxi-drivers-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
soc: sunxi: Add the A13, A23 and H3 system control compatibles
drivers: soc: sunxi: Add support for the C1 SRAM region
dt-bindings: sram: sunxi: Populate valid sections compatibles
dt-bindings: sram: sunxi: Add A13, A20, A23 and H3 dedicated bindings
soc: sunxi: sram: Add dt match for the A10 system-control compatible
dt-bindings: sram: sunxi: Introduce new A10 binding for system-control
bus: add bus driver for accessing Allwinner A64 DE2
dt-bindings: add binding for the Allwinner A64 DE2 bus
soc: sunxi: sram: Add updated compatible string for A64 system control
dt-bindings: sram: Rename A64 SRAM controller compatible
soc: sunxi: export a regmap for EMAC clock reg on A64
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Qualcomm ARM Based Driver Updates for v4.19
* Add Qualcomm LLCC driver
* Add Qualcomm RPMH controller
* Fix memleak in Qualcomm RMTFS
* Add dummy qcom_scm_assign_mem()
* Fix check for global partition in SMEM
* tag 'qcom-drivers-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
soc: qcom: rmtfs-mem: fix memleak in probe error paths
soc: qcom: llc-slice: Add missing MODULE_LICENSE()
drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()
drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcs
firmware: qcom: scm: add a dummy qcom_scm_assign_mem()
drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help children
drivers: qcom: rpmh-rsc: allow active requests from wake TCS
drivers: qcom: rpmh: add support for batch RPMH request
drivers: qcom: rpmh: allow requests to be sent asynchronously
drivers: qcom: rpmh: cache sleep/wake state requests
drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
drivers: qcom: rpmh: add RPMH helper functions
drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
drivers: soc: Add LLCC driver
dt-bindings: Documentation for qcom, llcc
soc: qcom: smem: Correct check for global partition
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Put NXP/Freescale QorIQ SoC drivers under a menu and make the item
naming more aligned.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Convert the Datapath I/O documentation to .rst format
and move to the Documation/networking/dpaa2 directory
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Remove the staging/drivers/fsl-mc directory from the staging
area now that all the components have been moved to the main
kernel areas.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Move the NXP DPIO (Datapath I/O Driver) out of the
drivers/staging directory and into the drivers/soc/fsl directory.
The DPIO driver enables access to Queue and Buffer Manager (QBMAN)
hardware on NXP DPAA2 devices. This is a prerequisite to moving the
DPAA2 Ethernet driver out of staging.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Previous commits:
commit 6e2387e8f19e ("staging: fsl-dpaa2/eth: Add Freescale DPAA2
Ethernet driver")
commit 39163c0ce0f4 ("staging: fsl-dpaa2/eth: Errors checking update")
have added bits that are not specific to the WRIOP accelerator.
Move these where they belong (in DPIO) such that other accelerators
can make use of them.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
This cousin to gpio-mpc8xxx was lacking a multiple pins method,
add one.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Sylwester Nawrocki <snawrocki@kernel.org>
|
|
Right now the only user of reset-imx7 is pci-imx6 and the
reset_control_assert and deassert calls on pciephy_reset don't toggle
the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing
1 or 0 respectively.
The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for
other registers like MIPIPHY and HSICPHY the bits are explicitly
documented as "1 means assert, 0 means deassert".
The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers update for 4.19:
- Handle i.MX6SL chip errata ERR006287 in the safest possible way by
keeping the DISP domain always-on, because Upon resuming from power
gating, the modules in the display power domain (eLCDIF, EPDC, PXP
and SPDC) might fail to perform register reads correctly.
- Use GENPD_FLAG_ALWAYS_ON flag for i.MX6QP PU ERR009619 handling.
It is functionally identical to the exsiting implementation but
simpler and slightly faster.
* tag 'imx-drivers-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
soc: imx: gpc: Disable 6sl display power gating for ERR006287
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
next/drivers
Reset controller changes for v4.19
This adds new drivers and bindings for the SDM845 AOSS (always on
subsystem) reset controller and for the Uniphier USB3 core reset.
SPI controller resets are added to the Uniphier reset driver.
* tag 'reset-for-4.19' of git://git.pengutronix.de/git/pza/linux:
reset: uniphier: add reset control support for SPI
reset: uniphier: add USB3 core reset control
dt-bindings: reset: uniphier: add USB3 core reset support
reset: simple: export reset_simple_ops to be referred from modules
reset: qcom: AOSS (always on subsystem) reset controller
dt-bindings: reset: Add AOSS reset bindings for SDM845 SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Make sure to set the mem device release callback before calling
put_device() in a couple of probe error paths so that the containing
object also gets freed.
Fixes: d1de6d6c639b ("soc: qcom: Remote filesystem memory driver")
Cc: stable <stable@vger.kernel.org> # 4.15
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add missing MODULE_LICENSE().
According to the SPDX-License-Identifier, the license is GPL v2.
Fixes the following warning:
WARNING: modpost: missing MODULE_LICENSE() in drivers/soc/qcom/llcc-slice.o
Fixes: a3134fb ("drivers: soc: Add LLCC driver")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The patch fixes the bug reported by Dan Carpenter.
It removes the unnecessary err check for ‘tcs’ reported by
static checker warning:
drivers/soc/qcom/rpmh-rsc.c:111 tcs_invalidate()
warn: 'tcs' isn't an ERR_PTR
See also:
drivers/soc/qcom/rpmh-rsc.c:178 get_tcs_for_msg() warn: 'tcs' isn't
an ERR_PTR
drivers/soc/qcom/rpmh-rsc.c:180 get_tcs_for_msg() warn: 'tcs' isn't
an ERR_PTR
https://www.spinics.net/lists/linux-soc/msg04624.html
Fixes: 9a3afcf ("drivers: qcom: rpmh-rsc: allow invalidation
of sleep/wake TCS")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
get_req_from_tcs introduced in patch[1] returns tcs_request from
tcs_group. The size of tcs (of type - tcs_group) array in rsc_drv is
TCS_TYPE_NR. So the loop index needs to be iterated up to TCS_TYPE_NR only.
[1] https://patchwork.kernel.org/patch/10477547/
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add a dummy qcom_scm_assign_mem() to enable building drivers when
CONFIG_COMPILE_TEST=y && CONFIG_QCOM_SCM=n.
All other qcom_scm_* functions already have a dummy version.
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Children of RPMh will need access to cmd_db. Rather than having each
child have code to check if cmd_db is ready let's add the check to
RPMh.
With this we'll be able to remove this boilerplate code from
clk-rpmh.c and qcom-rpmh-regulator.c. Neither of these files has
landed upstream yet but patches are pretty far along.
===
This code is based upon v11 of Lina and Raju's RPMh series.
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Some RSCs may only have sleep and wake TCS, i.e, there is no dedicated
TCS for active mode request, but drivers may still want to make active
requests from these RSCs. In such cases re-purpose the wake TCS to send
active state requests.
The requirement for this is that the driver is aware that the wake TCS
is being repurposed to send active request, hence the sleep and wake
TCSes be invalidated before the active request is sent.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Platform drivers need make a lot of resource state requests at the same
time, say, at the start or end of an usecase. It can be quite
inefficient to send each request separately. Instead they can give the
RPMH library a batch of requests to be sent and wait on the whole
transaction to be complete.
rpmh_write_batch() is a blocking call that can be used to send multiple
RPMH command sets. Each RPMH command set is set asynchronously and the
API blocks until all the command sets are complete and receive their
tx_done callbacks.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Platform drivers that want to send a request but do not want to block
until the RPMH request completes have now a new API -
rpmh_write_async().
The API allocates memory and send the requests and returns the control
back to the platform driver. The tx_done callback from the controller is
handled in the context of the controller's thread and frees the
allocated memory. This API allows RPMH requests from atomic contexts as
well.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Active state requests are sent immediately to the RSC controller, while
sleep and wake state requests are cached in this driver to avoid taxing
the RSC controller repeatedly. The cached values will be sent to the
controller when the rpmh_flush() is called.
Generally, flushing is a system PM activity and may be called from the
system PM drivers when the system is entering suspend or deeper sleep
modes during cpuidle.
Also allow invalidating the cached requests, so they may be re-populated
again.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[rplsssn: remove unneeded semicolon, address line over 80chars error]
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Allow sleep and wake commands to be cleared from the respective TCSes,
so that they can be re-populated.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Sleep and wake requests are sent when the application processor
subsystem of the SoC is entering deep sleep states like in suspend.
These requests help lower the system power requirements when the
resources are not in use.
Sleep and wake requests are written to the TCS slots but are not
triggered at the time of writing. The TCS are triggered by the firmware
after the last of the CPUs has executed its WFI. Since these requests
may come in different batches of requests, it is the job of this
controller driver to find and arrange the requests into the available
TCSes.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Sending RPMH requests and waiting for response from the controller
through a callback is common functionality across all platform drivers.
To simplify drivers, add a library functions to create RPMH client and
send resource state requests.
rpmh_write() is a synchronous blocking call that can be used to send
active state requests.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Log sent RPMH requests and interrupt responses in FTRACE.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[rplsssn@codeaurora.org: rebase to v4.18-rc1 & fix merge conflict]
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add device binding documentation for Qualcomm Technology Inc's RPMH RSC
driver. The driver is used for communicating resource state requests for
shared resources.
Cc: devicetree@vger.kernel.org
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
[rplsssn@codeaurora.org: minor order correction for TCS type]
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add controller driver for QCOM SoCs that have hardware based shared
resource management. The hardware IP known as RSC (Resource State
Coordinator) houses multiple Direct Resource Voter (DRV) for different
execution levels. A DRV is a unique voter on the state of a shared
resource. A Trigger Control Set (TCS) is a bunch of slots that can house
multiple resource state requests, that when triggered will issue those
requests through an internal bus to the Resource Power Manager Hardened
(RPMH) blocks. These hardware blocks are capable of adjusting clocks,
voltages, etc. The resource state request from a DRV are aggregated
along with state requests from other processors in the SoC and the
aggregate value is applied on the resource.
Some important aspects of the RPMH communication -
- Requests are <addr, value> with some header information
- Multiple requests (upto 16) may be sent through a TCS, at a time
- Requests in a TCS are sent in sequence
- Requests may be fire-n-forget or completion (response expected)
- Multiple TCS from the same DRV may be triggered simultaneously
- Cannot send a request if another request for the same addr is in
progress from the same DRV
- When all the requests from a TCS are complete, an IRQ is raised
- The IRQ handler needs to clear the TCS before it is available for
reuse
- TCS configuration is specific to a DRV
- Platform drivers may use DRV from different RSCs to make requests
Resource state requests made when CPUs are active are called 'active'
state requests. Requests made when all the CPUs are powered down (idle
state) are called 'sleep' state requests. They are matched by a
corresponding 'wake' state requests which puts the resources back in to
previously requested active state before resuming any CPU. TCSes are
dedicated for each type of requests. Active mode TCSes (AMC) are used to
send requests immediately to the resource, while control TCS are used to
provide specific information to the controller. Sleep and Wake TCS send
sleep and wake requests, after and before the system halt respectively.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
LLCC (Last Level Cache Controller) provides additional cache memory
in the system. LLCC is partitioned into multiple slices and each
slice gets its own priority, size, ID and other config parameters.
LLCC driver programs these parameters for each slice. Clients that
are assigned to use LLCC need to get information such size & ID of the
slice they get and activate or deactivate the slice as needed. LLCC driver
provides API for the clients to perform these operations.
Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Documentation for last level cache controller device tree bindings,
client bindings usage examples.
Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The moved check for the global partition ended up in the wrong place and I
failed to spot this in my review. This moves it to the correct place.
Fixes: 11d2e7edac6a ("soc: qcom: smem: check sooner in qcom_smem_set_global_partition()")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The Amlogic Audio ARB is a simple device which enables or
disables the access of Audio FIFOs to DDR on AXG based SoC.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add dt-bindings for the audio memory arbiter found on Amlogic's
A113 based SoCs
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The A13, A23 and H3 have variations of the system controls, in part due to
the SRAM that are available (and can be mapped) in the SoC.
In order to make it future proof, let's add compatibles for these SoCs in
the driver.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Add reset control for SPI controller on UniPhier SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
This is functionally identical but simpler and slightly faster.
The PU domain is turned on at boot time and never turned off. In the
current implementation the pm core will repeatedly call power_off when
the domain is unused and get -EBUSY back. If the domain is marked as
"always on" instead the pm core won't even attempt to turn it off.
In theory on 6qp it is safe to turn PU off in suspend, however that is
best accomplished with a new core flag.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
MT6351 is a new power management IC and it is used for mt6797 SoCs. To define
mt6351_regs for pmic register mapping and pmic_mt6351 for
accessing register.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
mt6797 is a highly integrated SoCs, it uses mt6351 for power management.
This patch adds pwrap driver to access mt6351. Pwrap of mt6797 support
dynamic priority meichanism, sequence monitor and starvation mechanism
to make transaction more reliable.
A big change from V4 to V5 is we remove INT1 interrupt declaration since
it is only for debug purpose. The PWRAP_RDDMY, RESET and DCM can use legacy
setting, it is backwards compatible. The new caps flag declaration is not
needed, just remove it.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
