summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-15bpf: fix panic in prog load calls cleanupDaniel Borkmann
While testing I found that when hitting error path in bpf_prog_load() where we jump to free_used_maps and prog contained BPF to BPF calls that were JITed earlier, then we never clean up the bpf_prog_kallsyms_add() done under jit_subprogs(). Add proper API to make BPF kallsyms deletion more clear and fix that. Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-15bpf, selftests: delete xfrm tunnel when test exits.William Tu
Make the printting of bpf xfrm tunnel better and cleanup xfrm state and policy when xfrm test finishes. Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-15bpf, selftest: check tunnel type more accuratelyJian Wang
Grep tunnel type directly to make sure 'ip' command supports it. Signed-off-by: Jian Wang <jianjian.wang1@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-15Merge branch 'bpf-misc-fixes'Daniel Borkmann
Jakub Kicinski says: ==================== This small series allows test_offload.py selftest to run on modern distributions which may create BPF programs for cgroups at boot, like Ubuntu 18.04. We still expect the program list to not be altered by any other agent while the test is running, but no longer depend on there being no BPF programs at all at the start. Fixing the test revealed a small problem with bpftool, which doesn't report the program load time very accurately. Because nanoseconds were not taken into account reported load time would fluctuate by 1 second. First patch of the series takes care of fixing that. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-15selftests/bpf: test offloads even with BPF programs presentJakub Kicinski
Modern distroes increasingly make use of BPF programs. Default Ubuntu 18.04 installation boots with a number of cgroup_skb programs loaded. test_offloads.py tries to check if programs and maps are not leaked on error paths by confirming the list of programs on the system is empty between tests. Since we can no longer expect the system to have no BPF objects at boot try to remember the programs and maps present at the start, and skip those when scanning the system. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-15tools: bpftool: improve accuracy of load timeJakub Kicinski
BPF program load time is reported from the kernel relative to boot time. If conversion to wall clock does not take nanosecond parts into account, the load time reported by bpftool may differ by one second from run to run. This means JSON object reported by bpftool for a program will randomly change. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-13selftests: bpf: config: add config fragmentsAnders Roxell
Tests test_tunnel.sh fails due to config fragments ins't enabled. Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-13tools/bpftool: fix a bug in bpftool perfYonghong Song
Commit b04df400c302 ("tools/bpftool: add perf subcommand") introduced bpftool subcommand perf to query bpf program kuprobe and tracepoint attachments. The perf subcommand will first test whether bpf subcommand BPF_TASK_FD_QUERY is supported in kernel or not. It does it by opening a file with argv[0] and feeds the file descriptor and current task pid to the kernel for querying. Such an approach won't work if the argv[0] cannot be opened successfully in the current directory. This is especially true when bpftool is accessible through PATH env variable. The error below reflects the open failure for file argv[0] at home directory. [yhs@localhost ~]$ which bpftool /usr/local/sbin/bpftool [yhs@localhost ~]$ bpftool perf Error: perf_query_support: No such file or directory To fix the issue, let us open root directory ("/") which exists in every linux system. With the fix, the error message will correctly reflect the permission issue. [yhs@localhost ~]$ which bpftool /usr/local/sbin/bpftool [yhs@localhost ~]$ bpftool perf Error: perf_query_support: Operation not permitted HINT: non root or kernel doesn't support TASK_FD_QUERY Fixes: b04df400c302 ("tools/bpftool: add perf subcommand") Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Yonghong Song <yhs@fb.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-12xsk: re-add queue id check for XDP_SKB pathBjörn Töpel
Commit 173d3adb6f43 ("xsk: add zero-copy support for Rx") introduced a regression on the XDP_SKB receive path, when the queue id checks were removed. Now, they are back again. Fixes: 173d3adb6f43 ("xsk: add zero-copy support for Rx") Reported-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-11tcp: Do not reload skb pointer after skb_gro_receive().David Miller
This is not necessary. skb_gro_receive() will never change what 'head' points to. In it's original implementation (see commit 71d93b39e52e ("net: Add skb_gro_receive")), it did: ==================== + *head = nskb; + nskb->next = p->next; + p->next = NULL; ==================== This sequence was removed in commit 58025e46ea2d ("net: gro: remove obsolete code from skb_gro_receive()") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <edumazet@google.com>
2018-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-06-12 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Avoid an allocation warning in AF_XDP by adding __GFP_NOWARN for the umem setup, from Björn. 2) Silence a warning in bpf fs when an application tries to open(2) a pinned bpf obj due to missing fops. Add a dummy open fop that continues to just bail out in such case, from Daniel. 3) Fix a BPF selftest urandom_read build issue where gcc complains that it gets built twice, from Anders. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-11Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-06-11 This series contains fixes to ixgbe IPsec and MACVLAN. Alex provides the 5 fixes in this series, starting with fixing an issue where num_rx_pools was not being populated until after the queues and interrupts were reinitialized when enabling MACVLAN interfaces. Updated to use CONFIG_XFRM_OFFLOAD instead of CONFIG_XFRM, since the code requires CONFIG_XFRM_OFFLOAD to be enabled. Moved the IPsec initialization function to be more consistent with the placement of similar initialization functions and before the call to reset the hardware, which will clean up any link issues that may have been introduced. Fixed the boolean logic that was testing for transmit OR receive ready bits, when it should have been testing for transmit AND receive ready bits. Fixed the bit definitions for SECTXSTAT and SECRXSTAT registers and ensure that if IPsec is disabled on the part, do not enable it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-11net/ipv6: Ensure cfg is properly initialized in ipv6_create_tempaddrDavid Ahern
Valdis reported a BUG in ipv6_add_addr: [ 1820.832682] BUG: unable to handle kernel NULL pointer dereference at 0000000000000209 [ 1820.832728] RIP: 0010:ipv6_add_addr+0x280/0xd10 [ 1820.832732] Code: 49 8b 1f 0f 84 6a 0a 00 00 48 85 db 0f 84 4e 0a 00 00 48 8b 03 48 8b 53 08 49 89 45 00 49 8b 47 10 49 89 55 08 48 85 c0 74 15 <48> 8b 50 08 48 8b 00 49 89 95 b8 01 00 00 49 89 85 b0 01 00 00 4c [ 1820.832847] RSP: 0018:ffffaa07c2fd7880 EFLAGS: 00010202 [ 1820.832853] RAX: 0000000000000201 RBX: ffffaa07c2fd79b0 RCX: 0000000000000000 [ 1820.832858] RDX: a4cfbfba2cbfa64c RSI: 0000000000000000 RDI: ffffffff8a8e9fa0 [ 1820.832862] RBP: ffffaa07c2fd7920 R08: 000000000000017a R09: ffffffff8a555300 [ 1820.832866] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888d18e71c00 [ 1820.832871] R13: ffff888d0a9b1200 R14: 0000000000000000 R15: ffffaa07c2fd7980 [ 1820.832876] FS: 00007faa51bdb800(0000) GS:ffff888d1d400000(0000) knlGS:0000000000000000 [ 1820.832880] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1820.832885] CR2: 0000000000000209 CR3: 000000021e8f8001 CR4: 00000000001606e0 [ 1820.832888] Call Trace: [ 1820.832898] ? __local_bh_enable_ip+0x119/0x260 [ 1820.832904] ? ipv6_create_tempaddr+0x259/0x5a0 [ 1820.832912] ? __local_bh_enable_ip+0x139/0x260 [ 1820.832921] ipv6_create_tempaddr+0x2da/0x5a0 [ 1820.832926] ? ipv6_create_tempaddr+0x2da/0x5a0 [ 1820.832941] manage_tempaddrs+0x1a5/0x240 [ 1820.832951] inet6_addr_del+0x20b/0x3b0 [ 1820.832959] ? nla_parse+0xce/0x1e0 [ 1820.832968] inet6_rtm_deladdr+0xd9/0x210 [ 1820.832981] rtnetlink_rcv_msg+0x1d4/0x5f0 Looking at the code I found 1 element (peer_pfx) of the newly introduced ifa6_config struct that is not initialized. Use a memset rather than hard coding an init for each struct element. Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Fixes: e6464b8c63619 ("net/ipv6: Convert ipv6_add_addr to struct ifa6_config") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-11tls: fix NULL pointer dereference on pollDaniel Borkmann
While hacking on kTLS, I ran into the following panic from an unprivileged netserver / netperf TCP session: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000037f378067 P4D 800000037f378067 PUD 3c0e61067 PMD 0 Oops: 0010 [#1] SMP KASAN PTI CPU: 1 PID: 2289 Comm: netserver Not tainted 4.17.0+ #139 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffff88036abcf740 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88036f5f6800 RCX: 1ffff1006debed26 RDX: ffff88036abcf920 RSI: ffff8803cb1a4f00 RDI: ffff8803c258c280 RBP: ffff8803c258c280 R08: ffff8803c258c280 R09: ffffed006f559d48 R10: ffff88037aacea43 R11: ffffed006f559d49 R12: ffff8803c258c280 R13: ffff8803cb1a4f20 R14: 00000000000000db R15: ffffffffc168a350 FS: 00007f7e631f4700(0000) GS:ffff8803d1c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000003ccf64005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? tls_sw_poll+0xa4/0x160 [tls] ? sock_poll+0x20a/0x680 ? do_select+0x77b/0x11a0 ? poll_schedule_timeout.constprop.12+0x130/0x130 ? pick_link+0xb00/0xb00 ? read_word_at_a_time+0x13/0x20 ? vfs_poll+0x270/0x270 ? deref_stack_reg+0xad/0xe0 ? __read_once_size_nocheck.constprop.6+0x10/0x10 [...] Debugging further, it turns out that calling into ctx->sk_poll() is invalid since sk_poll itself is NULL which was saved from the original TCP socket in order for tls_sw_poll() to invoke it. Looks like the recent conversion from poll to poll_mask callback started in 152524231023 ("net: add support for ->poll_mask in proto_ops") missed to eventually convert kTLS, too: TCP's ->poll was converted over to the ->poll_mask in commit 2c7d3dacebd4 ("net/tcp: convert to ->poll_mask") and therefore kTLS wrongly saved the ->poll old one which is now NULL. Convert kTLS over to use ->poll_mask instead. Also instead of POLLIN | POLLRDNORM use the proper EPOLLIN | EPOLLRDNORM bits as the case in tcp_poll_mask() as well that is mangled here. Fixes: 2c7d3dacebd4 ("net/tcp: convert to ->poll_mask") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Watson <davejwatson@fb.com> Tested-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-11xsk: silence warning on memory allocation failureBjörn Töpel
syzkaller reported a warning from xdp_umem_pin_pages(): WARNING: CPU: 1 PID: 4537 at mm/slab_common.c:996 kmalloc_slab+0x56/0x70 mm/slab_common.c:996 ... __do_kmalloc mm/slab.c:3713 [inline] __kmalloc+0x25/0x760 mm/slab.c:3727 kmalloc_array include/linux/slab.h:634 [inline] kcalloc include/linux/slab.h:645 [inline] xdp_umem_pin_pages net/xdp/xdp_umem.c:205 [inline] xdp_umem_reg net/xdp/xdp_umem.c:318 [inline] xdp_umem_create+0x5c9/0x10f0 net/xdp/xdp_umem.c:349 xsk_setsockopt+0x443/0x550 net/xdp/xsk.c:531 __sys_setsockopt+0x1bd/0x390 net/socket.c:1935 __do_sys_setsockopt net/socket.c:1946 [inline] __se_sys_setsockopt net/socket.c:1943 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1943 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe This is a warning about attempting to allocate more than KMALLOC_MAX_SIZE memory. The request originates from userspace, and if the request is too big, the kernel is free to deny its allocation. In this patch, the failed allocation attempt is silenced with __GFP_NOWARN. Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Reported-by: syzbot+4abadc5d69117b346506@syzkaller.appspotmail.com Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) Reject non-null terminated helper names from xt_CT, from Gao Feng. 2) Fix KASAN splat due to out-of-bound access from commit phase, from Alexey Kodanev. 3) Missing conntrack hook registration on IPVS FTP helper, from Julian Anastasov. 4) Incorrect skbuff allocation size in bridge nft_reject, from Taehee Yoo. 5) Fix inverted check on packet xmit to non-local addresses, also from Julian. 6) Fix ebtables alignment compat problems, from Alin Nastac. 7) Hook mask checks are not correct in xt_set, from Serhey Popovych. 8) Fix timeout listing of element in ipsets, from Jozsef. 9) Cap maximum timeout value in ipset, also from Jozsef. 10) Don't allow family option for hash:mac sets, from Florent Fourcot. 11) Restrict ebtables to work with NFPROTO_BRIDGE targets only, this Florian. 12) Another bug reported by KASAN in the rbtree set backend, from Taehee Yoo. 13) Missing __IPS_MAX_BIT update doesn't include IPS_OFFLOAD_BIT. From Gao Feng. 14) Missing initialization of match/target in ebtables, from Florian Westphal. 15) Remove useless nft_dup.h file in include path, from C. Labbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-11net: dsa: add error handling for pskb_trim_rcsumZhouyang Jia
When pskb_trim_rcsum fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling pskb_trim_rcsum. Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-11ipv6: allow PMTU exceptions to local routesJulian Anastasov
IPVS setups with local client and remote tunnel server need to create exception for the local virtual IP. What we do is to change PMTU from 64KB (on "lo") to 1460 in the common case. Suggested-by: Martin KaFai Lau <kafai@fb.com> Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Fixes: 7343ff31ebf0 ("ipv6: Don't create clones of host routes.") Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-11ixgbe: Fix bit definitions and add support for testing for ipsec supportAlexander Duyck
This patch addresses two issues. First it adds the correct bit definitions for the SECTXSTAT and SECRXSTAT registers. Then it makes use of those definitions to test for if IPsec has been disabled on the part and if so we do not enable it. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by: Andre Tomt <andre@tomt.net> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-11ixgbe: Avoid loopback and fix boolean logic in ipsec_stop_dataAlexander Duyck
This patch fixes two issues. First we add an early test for the Tx and Rx security block ready bits. By doing this we can avoid the need for waits or loopback in the event that the security block is already flushed out. Secondly we fix the boolean logic that was testing for the Tx OR Rx ready bits being set and change it so that we only exit if the Tx AND Rx ready bits are both set. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-11ixgbe: Move ipsec init function to before reset callAlexander Duyck
This patch moves the IPsec init function in ixgbe_sw_init. This way it is a bit more consistent with the placement of similar initialization functions and is placed before the reset_hw call which should allow us to clean up any link issues that may be introduced by the fact that we force the link up if somehow the device had IPsec still enabled before the driver was loaded. In addition to the function move it is necessary to change the assignment of netdev->features. The easiest way to do this is to just test for the existence of adapter->ipsec and if it is present we set the feature bits. Fixes: 49a94d74d948 ("ixgbe: add ipsec engine start and stop routines") Reported-by: Andre Tomt <andre@tomt.net> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-11ixgbe: Use CONFIG_XFRM_OFFLOAD instead of CONFIG_XFRMAlexander Duyck
There is no point in adding code if CONFIG_XFRM is defined that we won't use unless CONFIG_XFRM_OFFLOAD is defined. So instead of leaving this code floating around I am replacing the ifdef with what I believe is the correct one so that we only include the code and variables if they will actually be used. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-11ixgbe: Fix setting of TC configuration for macvlan caseAlexander Duyck
When we were enabling macvlan interfaces we weren't correctly configuring things until ixgbe_setup_tc was called a second time either by tweaking the number of queues or increasing the macvlan count past 15. The issue came down to the fact that num_rx_pools is not populated until after the queues and interrupts are reinitialized. Instead of trying to set it sooner we can just move the call to setup at least 1 traffic class to the SR-IOV/VMDq setup function so that we just set it for this one case. We already had a spot that was configuring the queues for TC 0 in the code here anyway so it makes sense to also set the number of TCs here as well. Fixes: 49cfbeb7a95c ("ixgbe: Fix handling of macvlan Tx offload") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-11selftests: bpf: fix urandom_read build issueAnders Roxell
gcc complains that urandom_read gets built twice. gcc -o tools/testing/selftests/bpf/urandom_read -static urandom_read.c -Wl,--build-id gcc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf -I../../../../include/generated -I../../../include urandom_read.c urandom_read -lcap -lelf -lrt -lpthread -o tools/testing/selftests/bpf/urandom_read gcc: fatal error: input file ‘tools/testing/selftests/bpf/urandom_read’ is the same as output file compilation terminated. ../lib.mk:110: recipe for target 'tools/testing/selftests/bpf/urandom_read' failed To fix this issue remove the urandom_read target and so target TEST_CUSTOM_PROGS gets used. Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix several bpfilter/UMH bugs, in particular make the UMH build not depend upon X86 specific Kconfig symbols. From Alexei Starovoitov. 2) Fix handling of modified context pointer in bpf verifier, from Daniel Borkmann. 3) Kill regression in ifdown/ifup sequences for hv_netvsc driver, from Dexuan Cui. 4) When the bonding primary member name changes, we have to re-evaluate the bond->force_primary setting, from Xiangning Yu. 5) Eliminate possible padding beyone end of SKB in cdc_ncm driver, from Bjørn Mork. 6) RX queue length reported for UDP sockets in procfs and socket diag are inaccurate, from Paolo Abeni. 7) Fix br_fdb_find_port() locking, from Petr Machata. 8) Limit sk_rcvlowat values properly in TCP, from Soheil Hassas Yeganeh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits) tcp: limit sk_rcvlowat by the maximum receive buffer net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620 socket: close race condition between sock_close() and sockfs_setattr() net: bridge: Fix locking in br_fdb_find_port() udp: fix rx queue len reported by diag and proc interface cdc_ncm: avoid padding beyond end of skb net/sched: act_simple: fix parsing of TCA_DEF_DATA net: fddi: fix a possible null-ptr-deref net: aquantia: fix unsigned numvecs comparison with less than zero net: stmmac: fix build failure due to missing COMMON_CLK dependency bpfilter: fix race in pipe access bpf, xdp: fix crash in xdp_umem_unaccount_pages xsk: Fix umem fill/completion queue mmap on 32-bit tools/bpf: fix selftest get_cgroup_id_user bpfilter: fix OUTPUT_FORMAT umh: fix race condition net: mscc: ocelot: Fix uninitialized error in ocelot_netdevice_event() bonding: re-evaluate force_primary when the primary slave name changes ip_tunnel: Fix name string concatenate in __ip_tunnel_create() hv_netvsc: Fix a network regression after ifdown/ifup ...
2018-06-10Merge tag 'rtc-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Setting the supported range from drivers for RTCs failing soon has started. A few fixes are developed along the way. Some drivers have been switched to SPDX by their maintainers. Subsystem: - rework of the rtc-test driver which allows to test the core more thoroughly - rtc_set_alarm() now fails early when alarms are not supported Drivers: - mktime() is now replaced by mktime64() - RTC range added for 88pm80x, ab-b5ze-s3, at91rm9200, brcmstb-waketimer, ds1685, ftrtc010, ls1x, mxc_v2, rx8581, sprd, st-lpc, tps6586x, tps65910 and vr41xx - fixed a possible race condition in probe functions - pxa: fix the probe function that is broken since v4.3 - stm32: now supports stm32mp1" * tag 'rtc-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (78 commits) rtc: pxa: fix probe function rtc: cros-ec: Switch to SPDX identifier. rtc: cros-ec: Make license text and module license match. rtc: ensure rtc_set_alarm fails when alarms are not supported rtc: test: remove alarm support from the first device rtc: test: convert to devm_rtc_allocate_device rtc: ftrtc010: let the core handle range rtc: ftrtc010: handle dates after 2106 rtc: ftrtc010: switch to devm_rtc_allocate_device rtc: mrst: switch to devm functions rtc: sunxi: fix possible race condition rtc: test: remove irq sysfs file rtc: test: emulate alarms using timers rtc: test: store time as an offset to system time rtc: test: allow registering many devices rtc: test: remove useless proc info rtc: ds1685: Add range rtc: ds1685: fix possible race condition rtc: sprd: Add new RTC power down check method rtc: sun6i: Fix bit_idx value for clk_register_gate ...
2018-06-10Merge tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI and UBIFS updates from Richard Weinberger: - the UBI on-disk format header file is now dual licensed - new way to detect Fastmap problems during runtime - bugfix for Fastmap - minor updates for UBIFS (spelling, comments, vm_fault_t, ...) * tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifs: mtd: ubi: Update ubi-media.h to dual license ubi: fastmap: Detect EBA mismatches on-the-fly ubi: fastmap: Check each mapping only once ubi: fastmap: Correctly handle interrupted erasures in EBA ubi: fastmap: Cancel work upon detach ubifs: lpt: Fix wrong pnode number range in comment ubifs: gc: Fix typo ubifs: log: Some spelling fixes ubifs: Spelling fix someting -> something ubifs: journal: Remove wrong comment ubifs: remove set but never used variable ubifs, xattr: remove misguided quota flags fs: ubifs: Adding new return type vm_fault_t
2018-06-10tcp: limit sk_rcvlowat by the maximum receive bufferSoheil Hassas Yeganeh
The user-provided value to setsockopt(SO_RCVLOWAT) can be larger than the maximum possible receive buffer. Such values mute POLLIN signals on the socket which can stall progress on the socket. Limit the user-provided value to half of the maximum receive buffer, i.e., half of sk_rcvbuf when the receive buffer size is set by the user, or otherwise half of sysctl_tcp_rmem[2]. Fixes: d1361840f8c5 ("tcp: fix SO_RCVLOWAT and RCVBUF autotuning") Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-10Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ...
2018-06-10net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620Alvaro Gamez Machado
DP83620 register set is compatible with the DP83848, but it also supports 100base-FX. When the hardware is configured such as that fiber mode is enabled, autonegotiation is not possible. The chip, however, doesn't expose this information via BMSR_ANEGCAPABLE. Instead, this bit is always set high, even if the particular hardware configuration makes it so that auto negotiation is not possible [1]. Under these circumstances, the phy subsystem keeps trying for autonegotiation to happen, without success. Hereby, we inspect BMCR_ANENABLE bit after genphy_config_init, which on reset is set to 0 when auto negotiation is disabled, and so we use this value instead of BMSR_ANEGCAPABLE. [1] https://e2e.ti.com/support/interface/ethernet/f/903/p/697165/2571170 Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-10socket: close race condition between sock_close() and sockfs_setattr()Cong Wang
fchownat() doesn't even hold refcnt of fd until it figures out fd is really needed (otherwise is ignored) and releases it after it resolves the path. This means sock_close() could race with sockfs_setattr(), which leads to a NULL pointer dereference since typically we set sock->sk to NULL in ->release(). As pointed out by Al, this is unique to sockfs. So we can fix this in socket layer by acquiring inode_lock in sock_close() and checking against NULL in sockfs_setattr(). sock_release() is called in many places, only the sock_close() path matters here. And fortunately, this should not affect normal sock_close() as it is only called when the last fd refcnt is gone. It only affects sock_close() with a parallel sockfs_setattr() in progress, which is not common. Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.") Reported-by: shankarapailoor <shankarapailoor@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-10Merge tag '4.18-fixes-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: - one smb3 (ACL related) fix for stable - one SMB3 security enhancement (when mounting -t smb3 forbid less secure dialects) - some RDMA and compounding fixes * tag '4.18-fixes-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix a buffer leak in smb2_query_symlink smb3: do not allow insecure cifs mounts when using smb3 CIFS: Fix NULL ptr deref CIFS: fix encryption in SMB3.1.1 CIFS: Pass page offset for encrypting CIFS: Pass page offset for calculating signature CIFS: SMBD: Support page offset in memory registration CIFS: SMBD: Support page offset in RDMA recv CIFS: SMBD: Support page offset in RDMA send CIFS: When sending data on socket, pass the correct page offset CIFS: Introduce helper function to get page offset and length in smb_rqst CIFS: Calculate the correct request length based on page offset and tail size cifs: For SMB2 security informaion query, check for minimum sized security descriptor instead of sizeof FileAllInformation class CIFS: Fix signing for SMB2/3
2018-06-10Merge tag 'for-linus-20180610' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block flush handling fix from Jens Axboe: "Single fix that we should merge now, fixing a regression in queuing flush request, accessing request flags after calling the end_request handler" * tag 'for-linus-20180610' of git://git.kernel.dk/linux-block: block: fix use-after-free in block flush handling
2018-06-10Merge branch 'core-rseq-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull restartable sequence support from Thomas Gleixner: "The restartable sequences syscall (finally): After a lot of back and forth discussion and massive delays caused by the speculative distraction of maintainers, the core set of restartable sequences has finally reached a consensus. It comes with the basic non disputed core implementation along with support for arm, powerpc and x86 and a full set of selftests It was exposed to linux-next earlier this week, so it does not fully comply with the merge window requirements, but there is really no point to drag it out for yet another cycle" * 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: Provide Makefile, scripts, gitignore rseq/selftests: Provide parametrized tests rseq/selftests: Provide basic percpu ops test rseq/selftests: Provide basic test rseq/selftests: Provide rseq library selftests/lib.mk: Introduce OVERRIDE_TARGETS powerpc: Wire up restartable sequences system call powerpc: Add syscall detection for restartable sequences powerpc: Add support for restartable sequences x86: Wire up restartable sequence system call x86: Add support for restartable sequences arm: Wire up restartable sequences system call arm: Add syscall detection for restartable sequences arm: Add restartable sequences support rseq: Introduce restartable sequences system call uapi/headers: Provide types_32_64.h
2018-06-10Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 updates and fixes from Thomas Gleixner: - Fix the (late) fallout from the vector management rework causing hlist corruption and irq descriptor reference leaks caused by a missing sanity check. The straight forward fix triggered another long standing issue to surface. The pre rework code hid the issue due to being way slower, but now the chance that user space sees an EBUSY error return when updating irq affinities is way higher, though quite a bunch of userspace tools do not handle it properly despite the fact that EBUSY could be returned for at least 10 years. It turned out that the EBUSY return can be avoided completely by utilizing the existing delayed affinity update mechanism for irq remapped scenarios as well. That's a bit more error handling in the kernel, but avoids fruitless fingerpointing discussions with tool developers. - Decouple PHYSICAL_MASK from AMD SME as its going to be required for the upcoming Intel memory encryption support as well. - Handle legacy device ACPI detection properly for newer platforms - Fix the wrong argument ordering in the vector allocation tracepoint - Simplify the IDT setup code for the APIC=n case - Use the proper string helpers in the MTRR code - Remove a stale unused VDSO source file - Convert the microcode update lock to a raw spinlock as its used in atomic context. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Enable CMT and MBM on new Skylake stepping x86/apic/vector: Print APIC control bits in debugfs genirq/affinity: Defer affinity setting if irq chip is busy x86/platform/uv: Use apic_ack_irq() x86/ioapic: Use apic_ack_irq() irq_remapping: Use apic_ack_irq() x86/apic: Provide apic_ack_irq() genirq/migration: Avoid out of line call if pending is not set genirq/generic_pending: Do not lose pending affinity update x86/apic/vector: Prevent hlist corruption and leaks x86/vector: Fix the args of vector_alloc tracepoint x86/idt: Simplify the idt_setup_apic_and_irq_gates() x86/platform/uv: Remove extra parentheses x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME x86: Mark native_set_p4d() as __always_inline x86/microcode: Make the late update update_lock a raw lock for RT x86/mtrr: Convert to use strncpy_from_user() helper x86/mtrr: Convert to use match_string() helper x86/vdso: Remove unused file x86/i8237: Register device based on FADT legacy boot flag
2018-06-10Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "Three small commits updating the SSB mitigation to take the updated AMD mitigation variants into account" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Switch the selection of mitigation from CPU vendor to CPU features x86/bugs: Add AMD's SPEC_CTRL MSR usage x86/bugs: Add AMD's variant of SSB_NO
2018-06-10Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf tooling updates from Thomas Gleixner: "Perf tool updates and fixes: perf stat: - Display user and system time for workload targets (Jiri Olsa) perf record: - Enable arbitrary event names thru name= modifier (Alexey Budankov) PowerPC: - Add a python script for hypervisor call statistics (Ravi Bangoria) Intel PT: (Adrian Hunter) - Fix sync_switch INTEL_PT_SS_NOT_TRACING - Fix decoding to accept CBR between FUP and corresponding TIP - Fix MTC timing after overflow - Fix "Unexpected indirect branch" error perf test: - record+probe_libc_inet_pton: - To get the symbol table for dynamic shared objects on ubuntu we need to pass the -D/--dynamic command line option, unlike with the fedora distros (Arnaldo Carvalho de Melo) - code-reading: - Fix perf_env setup for PTI entry trampolines (Adrian Hunter) - kmod-path: - Add tests for vdso32 and vdsox32 (Adrian Hunter) - Use header file util/debug.h (Thomas Richter) perf annotate: - Make the various UI backends (stdio, TUI, gtk) use more consistently structs with annotation options as specified by the user (Arnaldo Carvalho de Melo) - Move annotation specific knobs from the symbol_conf global kitchen sink to the annotation option structs (Arnaldo Carvalho de Melo) perf script: - Add more PMU fields to python scripts event handler dict (Jin Yao) Core: - Fix misleading error for some unparsable events mentioning PMUs when those are not involved in the problem (Jiri Olsa) - Consider BSS symbols when processing /proc/kallsyms ('B' and 'b') (Arnaldo Carvalho de Melo) - Be more robust when trying to use per-symbol histograms, checking for unlikely but possible cases where the space for the histograms wasn't allocated, print a debug message for such cases (Arnaldo Carvalho de Melo) - Fix symbol and object code resolution for vdso32 and vdsox32 (Adrian Hunter) - No need to check for null when passing pointers to foo__get() style refcount grabbing helpers, just like in the kernel and with free(), its safe to pass a NULL pointer to avoid having to check it before each and every foo__get() call (Arnaldo Carvalho de Melo) - Remove some dead code (quote.[ch]) (Arnaldo Carvalho de Melo) - Remove some needless globals, making them local (Arnaldo Carvalho de Melo) - Reduce usage of symbol_conf.use_callchain, using other means of finding out if callchains are in use or available for specific events, as we evolved this codebase to allow requesting callchains for just a subset of the monitored events. In time it will help polish recording and showing mixed sets accross the various tools: perf record -e cycles/call-graph=fp/,cache-misses/call-graph=dwarf/,instructions' (Arnaldo Carvalho de Melo) - Consider PTI entry trampolines in map__rip_2objdump() (Adrian Hunter)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) perf script python: Add dict fields introduction to Documentation perf script python: Add more PMU fields to event handler dict perf script python: Move dsoname code to a new function perf symbols: Add BSS symbols when reading from /proc/kallsyms perf annnotate: Make __symbol__inc_addr_samples handle src->histograms == NULL perf intel-pt: Fix "Unexpected indirect branch" error perf intel-pt: Fix MTC timing after overflow perf intel-pt: Fix decoding to accept CBR between FUP and corresponding TIP perf intel-pt: Fix sync_switch INTEL_PT_SS_NOT_TRACING perf script powerpc: Python script for hypervisor call statistics perf test record+probe_libc_inet_pton: Ask 'nm' for dynamic symbols perf map: Consider PTI entry trampolines in rip_2objdump() perf test code-reading: Fix perf_env setup for PTI entry trampolines perf tools: Fix pmu events parsing rule perf stat: Display user and system time perf record: Enable arbitrary event names thru name= modifier perf tools: Fix symbol and object code resolution for vdso32 and vdsox32 perf tests kmod-path: Add tests for vdso32 and vdsox32 perf hists: Check if a hist_entry has callchains before using them perf hists: Introduce hist_entry__has_callchain() method ...
2018-06-10Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two small fixlets: - Add the missing iomu mapping call in the Freescale/NXP/Qualcomm/ whoever owns it now/ SCFG MSI irqchip driver. Otherwise IRQs wont work at all. - Fix a SMP=n build warning in the STM32 irq chip driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ls-scfg-msi: Map MSIs in the iommu irqchip/stm32: Fix non-SMP build warning
2018-06-10Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: "A small set of core updates: - Make objtool cope with GCC8 oddities some more - Remove a stale local_irq_save/restore sequence in the signal code along with the stale comment in the RCU code. The underlying issue which led to this has been solved long time ago, but nobody cared to cleanup the hackarounds" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: signal: Remove no longer required irqsave/restore rcu: Update documentation of rcu_read_unlock() objtool: Fix GCC 8 cold subfunction detection for aliased functions
2018-06-10signal: Remove no longer required irqsave/restoreAnna-Maria Gleixner
Commit a841796f11c9 ("signal: align __lock_task_sighand() irq disabling and RCU") introduced a rcu read side critical section with interrupts disabled. The changelog suggested that a better long-term fix would be "to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock". This long-term fix has been made in commit b4abf91047cf ("rtmutex: Make wait_lock irq safe") for a different reason. Therefore revert commit a841796f11c9 ("signal: align > __lock_task_sighand() irq disabling and RCU") as the interrupt disable dance is not longer required. The change was tested on the base of b4abf91047cf ("rtmutex: Make wait_lock irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep enabled as suggested by Paul McKenney. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de
2018-06-10rcu: Update documentation of rcu_read_unlock()Anna-Maria Gleixner
Since commit b4abf91047cf ("rtmutex: Make wait_lock irq safe") the explanation in rcu_read_unlock() documentation about irq unsafe rtmutex wait_lock is no longer valid. Remove it to prevent kernel developers reading the documentation to rely on it. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: bigeasy@linutronix.de Link: https://lkml.kernel.org/r/20180525090507.22248-2-anna-maria@linutronix.de
2018-06-09Merge branch 'proc-cmdline'Linus Torvalds
Merge proc_cmdline simplifications. This re-writes the get_mm_cmdline() logic to be rather simpler than it used to be, and makes the semantics for "cmdline goes past the end of the original area" more natural. You _can_ use prctl(PR_SET_MM) to just point your command line somewhere else entirely, but the traditional model is to just edit things in place and that still needs to continue to work. At least this way the code makes some sense. * proc-cmdline: fs/proc: simplify and clarify get_mm_cmdline() function fs/proc: re-factor proc_pid_cmdline_read() a bit
2018-06-09hpfs: Use EUCLEAN for filesystem errorsMikulas Patocka
Use the error code EUCLEAN for filesystem errors because other filesystems use this code too. [ And remove unused EMEMERROR - Linus ] Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-09Merge tag 'for-v4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - bq27xxx: Add BQ27426 support - ab8500: Drop AB8540/9540 support - Introduced new usb_type property - Properly document the power-supply ABI - misc. cleanups and fixes * tag 'for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: MAINTAINERS: add entry for LEGO MINDSTORMS EV3 power: supply: ab8500_charger: fix spelling mistake: "faile" -> "failed" power: supply: axp288_fuel_gauge: Remove polling from the driver power: supply: axp288_fuelguage: Do not bind when the fg function is not used power: supply: axp288_charger: Do not bind when the charge function is not used power: supply: axp288_charger: Support 3500 and 4000 mA input current limit power: supply: s3c-adc-battery: fix driver data initialization power: supply: charger-manager: Verify polling interval only when polling requested power: supply: sysfs: Use enum to specify property power: supply: ab8500: Drop AB8540/9540 support power: supply: ab8500_fg: fix spelling mistake: "Disharge" -> "Discharge" power: supply: simplify getting .drvdata power: supply: bq27xxx: Add support for BQ27426 gpio-poweroff: Use gpiod_set_value_cansleep
2018-06-09Merge tag 'hsi-for-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI update from Sebastian Reichel: "Just one patch for the HSI subsystem this time: use the new vm_fault_t return type" * tag 'hsi-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: hsi: clients: Change return type to vm_fault_t
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-06-09Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds
Pull MD updates from Shaohua Li: "A few fixes of MD for this merge window. Mostly bug fixes: - raid5 stripe batch fix from Amy - Read error handling for raid1 FailFast device from Gioh - raid10 recovery NULL pointer dereference fix from Guoqing - Support write hint for raid5 stripe cache from Mariusz - Fixes for device hot add/remove from Neil and Yufen - Improve flush bio scalability from Xiao" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: MD: fix lock contention for flush bios md/raid5: Assigning NULL to sh->batch_head before testing bit R5_Overlap of a stripe md/raid1: add error handling of read error from FailFast device md: fix NULL dereference of mddev->pers in remove_and_add_spares() raid5: copy write hint from origin bio to stripe md: fix two problems with setting the "re-add" device state. raid10: check bio in r10buf_pool_free to void NULL pointer dereference md: fix an error code format and remove unsed bio_sector
2018-06-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc updates from David Miller: - a FPE signal fix that was also merged upstream - privileged ADI driver from Tom Hromatka * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: fix compat siginfo ABI regression selftests: sparc64: char: Selftest for privileged ADI driver char: sparc64: Add privileged ADI driver
2018-06-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull IDE updates from David Miller: "Primarily IRQ disabling avoidance changes from Sebastian Andrzej Siewior" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: don't enable/disable interrupts in force threaded-IRQ mode ide: don't disable interrupts during kmap_atomic() ide: Handle irq disabling consistently alim15x3: move irq-restore before pci_dev_put()
2018-06-09Merge tag 'staging-4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big staging and IIO driver update for 4.18-rc1. It was delayed as I wanted to make sure the final driver deletions did not cause any major merge issues, and all now looks good. There are a lot of patches here, just over 1000. The diffstat summary shows the major changes here: 1007 files changed, 16828 insertions(+), 227770 deletions(-) Because of this, we might be close to shrinking the overall kernel source code size for two releases in a row. There was loads of work in this release cycle, primarily: - tons of ks7010 driver cleanups - lots of mt7621 driver fixes and cleanups - most driver cleanups - wilc1000 fixes and cleanups - lots and lots of IIO driver cleanups and new additions - debugfs cleanups for all staging drivers - lots of other staging driver cleanups and fixes, the shortlog has the full details. but the big user-visable things here are the removal of 3 chunks of code: - ncpfs and ipx were removed on schedule, no one has cared about this code since it moved to staging last year, and if it needs to come back, it can be reverted. - lustre file system is removed. I've ranted at the lustre developers about once a year for the past 5 years, with no real forward progress at all to clean things up and get the code into the "real" part of the kernel. Given that the lustre developers continue to work on an external tree and try to port those changes to the in-kernel tree every once in a while, this whole thing really really is not working out at all. So I'm deleting it so that the developers can spend the time working in their out-of-tree location and get things cleaned up properly to get merged into the tree correctly at a later date. Because of these file removals, you will have merge issues on some of these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the atomisp driver). Just delete those files, it's a simple merge :) All of this has been in linux-next for a while with no reported problems" * tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1011 commits) staging: ipx: delete it from the tree ncpfs: remove uapi .h files ncpfs: remove Documentation ncpfs: remove compat functionality staging: ncpfs: delete it staging: lustre: delete the filesystem from the tree. staging: vc04_services: no need to save the log debufs dentries staging: vc04_services: vchiq_debugfs_log_entry can be a void * staging: vc04_services: remove struct vchiq_debugfs_info staging: vc04_services: move client dbg directory into static variable staging: vc04_services: remove odd vchiq_debugfs_top() wrapper staging: vc04_services: no need to check debugfs return values staging: mt7621-gpio: reorder includes alphabetically staging: mt7621-gpio: change gc_map to don't use pointers staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property staging: mt7621-gpio: update #interrupt-cells for the gpio node staging: mt7621-gpio: dt-bindings: complete documentation for the gpio staging: mt7621-dts: add missing properties to gpio node ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 18:40:55 +0000