summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-12ice: remove redundant checks in ice_change_mtuMaciej Fijalkowski
dev_validate_mtu checks that mtu value specified by user is not less than min mtu and not greater than max allowed mtu. It is being done before calling the ndo_change_mtu exposed by driver, so remove these redundant checks in ice_change_mtu. Reviewed-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-12ice: move skb pointer from rx_buf to rx_ringMaciej Fijalkowski
Similar thing has been done in i40e, as there is no real need for having the sk_buff pointer in each rx_buf. Non-eop frames can be simply handled on that pointer moved upwards to rx_ring. Reviewed-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-12ice: simplify ice_run_xdpMaciej Fijalkowski
There's no need for 'result' variable, we can directly return the internal status based on action returned by xdp prog. Reviewed-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-12i40e: adjust i40e_is_non_eopMaciej Fijalkowski
i40e_is_non_eop had a leftover comment and unused skb argument which was used for placing the skb onto rx_buf in case when current buffer was non-eop one. This is not relevant anymore as commit e72e56597ba1 ("i40e/i40evf: Moves skb from i40e_rx_buffer to i40e_ring") pulled the non-complete skb handling out of rx_bufs up to rx_ring. Therefore, let's adjust the function arguments that i40e_is_non_eop takes. Furthermore, since there is already a function responsible for bumping the ntc, make use of that and drop that logic from i40e_is_non_eop so that the scope of this function is limited to what the name actually states. Reviewed-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-12i40e: drop misleading function commentsMaciej Fijalkowski
i40e_cleanup_headers has a statement about check against skb being linear or not which is not relevant anymore, so let's remove it. Same case for i40e_can_reuse_rx_page, it references things that are not present there anymore. Reviewed-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-12i40e: drop redundant check when setting xdp progMaciej Fijalkowski
Net core handles the case where netdev has no xdp prog attached and current prog is NULL. Therefore, remove such check within i40e_xdp_setup. Reviewed-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-12nl80211: add documentation for HT/VHT/HE disable attributesJohannes Berg
These were missed earlier, add the necessary documentation and, while at it, clarify it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20210212105023.895c3389f063.I46dea3bfc64385bc6f600c50d294007510994f8f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12cfg80211/mac80211: Support disabling HE modeBen Greear
Allow user to disable HE mode, similar to how VHT and HT can be disabled. Useful for testing. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20210204144610.25971-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: add STBC encoding to ieee80211_parse_tx_radiotapPhilipp Borgers
This patch adds support for STBC encoding to the radiotap tx parse function. Prior to this change adding the STBC flag to the radiotap header did not encode frames with STBC. Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de> Link: https://lore.kernel.org/r/20210125150744.83065-1-borgers@mi.fu-berlin.de [use u8_get_bits/u32_encode_bits instead of manually shifting] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: remove sample rate switching code for constrained devicesFelix Fietkau
This was added to mitigate the effects of too much sampling on devices that use a static global fallback table instead of configurable multi-rate retry. Now that the sampling algorithm is improved, this code path no longer performs any better than the standard probing on affected devices. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-6-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: show sampling rates in debugfsFelix Fietkau
This makes it easier to see what rates are going to be tested next Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: significantly redesign the rate probing strategyFelix Fietkau
The biggest flaw in current minstrel_ht is the fact that it needs way too many probing packets to be able to quickly find the best rate. Depending on the wifi hardware and operating mode, this can significantly reduce throughput when not operating at the highest available data rate. In order to be able to significantly reduce the amount of rate sampling, we need a much smarter selection of probing rates. The new approach introduced by this patch maintains a limited set of available rates to be tested during a statistics window. They are split into distinct categories: - MINSTREL_SAMPLE_TYPE_INC - incremental rate upgrade: Pick the next rate group and find the first rate that is faster than the current max. throughput rate - MINSTREL_SAMPLE_TYPE_JUMP - random testing of higher rates: Pick a random rate from the next group that is faster than the current max throughput rate. This allows faster adaptation when the link changes significantly - MINSTREL_SAMPLE_TYPE_SLOW - test a rate between max_prob, max_tp2 and max_tp in order to reduce the gap between them In order to prioritize sampling, every 6 attempts are split into 3x INC, 2x JUMP, 1x SLOW. Available rates are checked and refilled on every stats window update. With this approach, we finally get a very small delta in throughput when comparing setting the optimal data rate as a fixed rate vs normal rate control operation. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: reduce the need to sample slower ratesFelix Fietkau
In order to more gracefully be able to fall back to lower rates without too much throughput fluctuations, initialize all untested rates below tested ones to the maximum probabilty of higher rates. Usually this leads to untested lower rates getting initialized with a probability value of 100%, making them better candidates for fallback without having to rely on random probing Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: update total packets counter in tx status pathFelix Fietkau
Keep the update in one place and prepare for further rework Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: minstrel_ht: use bitfields to encode rate indexesFelix Fietkau
Get rid of a lot of divisions and modulo operations Reduces code size and improves performance Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210127055735.78599-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12cfg80211: initialize reg_rule in __freq_reg_info()Luca Coelho
Sparse started warning on this function because we can potentially return an uninitialized value. The reason is that if the caller passes a min_bw value that is higher then the last value in bws[], we will not go into the loop and reg_rule will remain initialized. This cannot happen because the only caller of this function uses either 1 or 20 in min_bw, but the function will be more robust if we pre-initialize the value. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210204154439.6c884ea7281c.I257278d03b0c1ae0aa6631672cfa48f1a95d5996@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: fix potential overflow when multiplying to u32 integersColin Ian King
The multiplication of the u32 variables tx_time and estimated_retx is performed using a 32 bit multiplication and the result is stored in a u64 result. This has a potential u32 overflow issue, so avoid this by casting tx_time to a u64 to force a 64 bit multiply. Addresses-Coverity: ("Unintentional integer overflow") Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210205175352.208841-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12mac80211: enable QoS support for nl80211 ctrl portMarkus Theil
This patch unifies sending control port frames over nl80211 and AF_PACKET sockets a little more. Before this patch, EAPOL frames got QoS prioritization only when using AF_PACKET sockets. __ieee80211_select_queue only selects a QoS-enabled queue for control port frames, when the control port protocol is set correctly on the skb. For the AF_PACKET path this works, but the nl80211 path used ETH_P_802_3. Another check for injected frames in wme.c then prevented the QoS TID to be copied in the frame. In order to fix this, get rid of the frame injection marking for nl80211 ctrl port and set the correct ethernet protocol. Please note: An erlier version of this path tried to prevent frame aggregation for control port frames in order to speed up the initial connection setup a little. This seemed to cause issues on my older Intel dvm-based hardware, and was therefore removed again. Future commits which try to reintroduce this have to check carefully how hw behaves with aggregated and non-aggregated traffic for the same TID. My NIC: Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20210206115112.567881-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12cfg80211: remove unused callbackMatteo Croce
The ieee80211 class registers a callback which actually does nothing. Given that the callback is optional, and all its accesses are protected by a NULL check, remove it entirely. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Link: https://lore.kernel.org/r/20210208113356.4105-1-mcroce@linux.microsoft.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-12rtw88: 8822c: update RF_B (2/2) parameter tables to v60Po-Hao Huang
Update RTL8822C devices' RF_A tables to v60. The new parameters fix incorrect RSSI report under 2.4G link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-9-pkshih@realtek.com
2021-02-12rtw88: 8822c: update RF_B (1/2) parameter tables to v60Po-Hao Huang
Update RTL8822C devices' RF_B tables to v60. The new parameters fix incorrect RSSI report under 2.4G link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-8-pkshih@realtek.com
2021-02-12rtw88: 8822c: update RF_A parameter tables to v60Po-Hao Huang
Update RTL8822C devices' RF_A tables to v60. The new parameters fix incorrect RSSI report under 2.4G link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-7-pkshih@realtek.com
2021-02-12rtw88: 8822c: update MAC/BB parameter tables to v60Po-Hao Huang
Update RTL8822C devices' MAC/BB tables to v60. The new parameters fix incorrect RSSI report under 2.4G link. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-6-pkshih@realtek.com
2021-02-12rtw88: replace tx tasklet with work queuePo-Hao Huang
Replace tasklet so we can do tx scheduling in parallel. Since throughput is delay-sensitive in most cases, we allocate a dedicated, high priority wq for our needs. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-5-pkshih@realtek.com
2021-02-12rtw88: add napi supportPo-Hao Huang
Use napi to reduce overhead on rx interrupts. Driver used to interrupt kernel for every Rx packet, this could affect both system and network performance. NAPI is a mechanism that uses polling when processing huge amount of traffic, by doing this the number of interrupts can be decreased. Network performance can also benefit from this patch. Since TCP connection is bidirectional and acks are required for every several packets. These ack packets occupie the PCI bus bandwidth and could lead to performance degradation. When napi is used, GRO receive is enabled by default in the mac80211 stack. So mac80211 won't pass every RX TCP packets to the kernel TCP network stack immediately. Instead an aggregated large length TCP packet will be delivered. This reduces the tx acks sent and gains rx performance. After the patch, the Rx throughput increases about 25Mbps in 11ac. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-4-pkshih@realtek.com
2021-02-12rtw88: add rts conditionPo-Hao Huang
Since we set the IEEE80211_HW_HAS_RATE_CONTROL flag, so use_rts in ieee80211_tx_info will never be set in the ieee80211_xmit_fast path. Add length check for skb to decide whether rts is needed. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-3-pkshih@realtek.com
2021-02-12rtw88: add dynamic rrsr configurationPo-Hao Huang
Register rrsr determines the response rate we send. In field tests, using rate higher than current tx rate could lead to difficulty for the receiving end to receive management/control frames. Calculate current modulation level by tx rate then cross out rate higher than those. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209070755.23019-2-pkshih@realtek.com
2021-02-12iwlwifi: remove incorrect comment in pnvmLuca Coelho
We use this driver as a backport that also runs on older kernels (as part of the backports project). So we use some checks to backport or prevent code from compiling in incompatible kernel version. When I took one of the PNVM patches from the backport, I accidentally left the comment that a certain part of the code doesn't work in older kernels. This obviously should never be valid for the mainline. Remove this comment. Reported-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210211223049.40d545a0fa89.I04793aaa5312b926335c8db32131f000432df511@changeid
2021-02-11Merge branch 'sock-rx-qmap'David S. Miller
Tariq Toukan says: ==================== Compile-flag for sock RX queue mapping Socket's RX queue mapping logic is useful also for non-XPS use cases. This series breaks the dependency between the two, introducing a new kernel config flag SOCK_RX_QUEUE_MAPPING. Here we select this new kernel flag from TLS_DEVICE, as well as XPS. ==================== Acked-by: Jakub Kicinski <kuba@kernel.org>
2021-02-11net/mlx5: Remove TLS dependencies on XPSTariq Toukan
No real dependency on XPS, but on RX queue mapping, which is being selected by TLS_DEVICE. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net/tls: Select SOCK_RX_QUEUE_MAPPING from TLS_DEVICETariq Toukan
Compile-in the socket RX queue mapping field and logic when TLS_DEVICE is enabled. This allows device drivers to pick the recorded socket's RX queue and use it for streams distribution. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net/sock: Add kernel config SOCK_RX_QUEUE_MAPPINGTariq Toukan
Use a new config SOCK_RX_QUEUE_MAPPING to compile-in the socket RX queue field and logic, instead of the XPS config. This breaks dependency in XPS, and allows selecting it from non-XPS use cases, as we do in the next patch. In addition, use the new flag to wrap the logic in sk_rx_queue_get() and protect access to the sk_rx_queue_mapping field, while keeping the function exposed unconditionally, just like sk_rx_queue_set() and sk_rx_queue_clear(). Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11tcp: Sanitize CMSG flags and reserved args in tcp_zerocopy_receive.Arjun Roy
Explicitly define reserved field and require it and any subsequent fields to be zero-valued for now. Additionally, limit the valid CMSG flags that tcp_zerocopy_receive accepts. Fixes: 7eeba1706eba ("tcp: Add receive timestamp support for receive zerocopy.") Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Suggested-by: David Ahern <dsahern@gmail.com> Suggested-by: Leon Romanovsky <leon@kernel.org> Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11r8169: handle tx before rx in napi pollHeiner Kallweit
Cleaning up tx descriptors first increases the chance that rtl_rx() can allocate new skb's from the cache. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: fix dev_ifsioc_locked() race conditionCong Wang
dev_ifsioc_locked() is called with only RCU read lock, so when there is a parallel writer changing the mac address, it could get a partially updated mac address, as shown below: Thread 1 Thread 2 // eth_commit_mac_addr_change() memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); // dev_ifsioc_locked() memcpy(ifr->ifr_hwaddr.sa_data, dev->dev_addr,...); Close this race condition by guarding them with a RW semaphore, like netdev_get_name(). We can not use seqlock here as it does not allow blocking. The writers already take RTNL anyway, so this does not affect the slow path. To avoid bothering existing dev_set_mac_address() callers in drivers, introduce a new wrapper just for user-facing callers on ioctl and rtnetlink paths. Note, bonding also changes slave mac addresses but that requires a separate patch due to the complexity of bonding code. Fixes: 3710becf8a58 ("net: RCU locking for simple ioctl()") Reported-by: "Gong, Sishuai" <sishuai@purdue.edu> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: fix interrupt mask/unmask skip conditionStefan Chulski
The condition should be skipped if CPU ID equal to nthreads. The patch doesn't fix any actual issue since nthreads = min_t(unsigned int, num_present_cpus(), MVPP2_MAX_THREADS). On all current Armada platforms, the number of CPU's is less than MVPP2_MAX_THREADS. Fixes: e531f76757eb ("net: mvpp2: handle cases where more CPUs are available than s/w threads") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'am65-cpsw-nuss-switchdev-driver'David S. Miller
Vignesh Raghavendra says: ==================== net: ti: am65-cpsw-nuss: Add switchdev driver This series adds switchdev support for AM65 CPSW NUSS driver to support multi port CPSW present on J721e and AM64 SoCs. It adds devlink hook to switch b/w switch mode and multi mac mode. v2: Rebased on latest net-next Update patch 1/4 with rationale for using devlink ====================
2021-02-11docs: networking: ti: Add driver doc for AM65 NUSS switch driverVignesh Raghavendra
J721e, J7200 and AM64 have multi port switches which can work in multi mac mode and in switch mode. Add documentation explaining how to use different modes. Borrowed from: Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: ti: am65-cpsw-nuss: Add switchdev supportVignesh Raghavendra
J721e, J7200 and AM64 have multi port switches which can work in multi mac mode and in switch mode. Add support for configuring this HW in switch mode using devlink and switchdev notifiers. Support is similar to existing CPSW switchdev implementation of TI's 32 bit platform like AM33/AM43/AM57. To enable switch mode: devlink dev param set platform/8000000.ethernet name switch_mode value true cmode runtime All configuration is implemented via switchdev API and notifiers. Supported: - SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS - SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS - SWITCHDEV_ATTR_ID_PORT_STP_STATE - SWITCHDEV_OBJ_ID_PORT_VLAN - SWITCHDEV_OBJ_ID_PORT_MDB - SWITCHDEV_OBJ_ID_HOST_MDB Hence AM65 CPSW switchdev driver supports: - FDB offloading - MDB offloading - VLAN filtering and offloading - STP Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: ti: am65-cpsw-nuss: Add netdevice notifiersVignesh Raghavendra
Register netdevice notifiers in order to receive notification when individual MAC ports are added to the HW bridge. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: ti: am65-cpsw-nuss: Add devlink supportVignesh Raghavendra
AM65 NUSS ethernet switch on K3 devices can be configured to work either in independent mac mode where each port acts as independent network interface (multi mac) or switch mode. Add devlink hooks to provide a way to switch b/w these modes. Rationale to use devlink instead of defaulting to bridge mode is that SoC use cases require to support multiple independent MAC ports with no switching so that users can use software bridges with multi-mac configuration (e.g: to support LAG, HSR/PRP, etc). Also, switching between multi mac and switch mode requires significant Port and ALE reconfiguration, therefore is easier to be made as part of mode change devlink hooks. It also allows to keep user interface similar to what was implemented for the previous generation of TI CPSW IP (on AM33/AM43/AM57 SoCs). Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'bcm4908_enet-post-review-fixes'David S. Miller
Rafał Miłecki says: ==================== bcm4908_enet: post-review fixes V2 of my BCM4908 Ethernet patchset was applied to the net-next.git and it was later that is received some extra reviews. I'm sending patches that handle pointed out issues. David: earler I missed that V2 was applied and I sent V3 and V4 of my inital patchset. Sorry for that. I think it's the best to ignore V3 and V4 I sent and proceed with this fixes patchset instead. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: bcm4908_enet: fix endianness in xmit codeRafał Miłecki
Use le32_to_cpu() for reading __le32 struct field filled by hw. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: bcm4908_enet: fix received skb lengthRafał Miłecki
Use ETH_FCS_LEN instead of magic value and drop incorrect + 2 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: bcm4908_enet: fix minor typosRafał Miłecki
1. Fix "ensable" typo noticed by Andrew 2. Fix chipset name in the struct net_device_ops variable Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: bcm4908_enet: drop "inline" from C functionsRafał Miłecki
It seems preferred to let compiler optimize code if applicable. While at it drop unused enet_umac_maskset(). Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: bcm4908_enet: drop unneeded memset()Rafał Miłecki
dma_alloc_coherent takes care of zeroing allocated memory Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: rename BCM4908 driver & update DT bindingRafał Miłecki
compatible string was updated to match normal naming convention so update driver as well Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11dt-bindings: net: bcm4908-enet: include ethernet-controller.yamlRafał Miłecki
It should be /included/ by every Ethernet controller binding. It adds support for various generic properties. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11dt-bindings: net: rename BCM4908 Ethernet bindingRafał Miłecki
Rob pointed out that a normal convention is "brcm,bcm4908-enet" so update whole binding to match it. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 14:00:09 +0000