summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-14net: hns3: refactor dump bd info of debugfsHuazhong Tan
Currently, the debugfs command for bd info is implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, add two debugfs directories "tx_bd_info" and "rx_bd_info", and create a file for each queue under these two directories, and query the bd info of specific queue by "cat tx_bd_info/tx_bd_queue*" or "cat rx_bd_info/rx_bd_queue*", return the result to userspace, rather than record in dmesg. The display style is below: $ cat rx_bd_info/rx_bd_queue0 Queue 0 rx bd info: BD_IDX L234_INFO PKT_LEN SIZE... 0 0x0 60 60... 1 0x0 1512 1512... $ cat tx_bd_info/tx_bd_queue0 Queue 0 tx bd info: BD_IDX ADDRESS VLAN_TAG SIZE... 0 0x0 0 0... 1 0x0 0 0... Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14net: hns3: refactor dev capability and dev spec of debugfsJiaran Zhang
Currently, the debugfs command for dev capability and dev spec are implemented by "echo xxxx > cmd", and record the information in dmesg. It's unnecessary and heavy. To improve it, create a single file "dev_info" for them, and query them by command "cat dev_info", return the result to userspace, rather than record in dmesg. The display style is below: $cat dev_info dev capability: support FD: yes support GRO: yes support FEC: yes support UDP GSO: no support PTP: no support INT QL: no support HW TX csum: no support UDP tunnel csum: no support TX push: no support imp-controlled PHY: no support rxd advanced layout: no dev spec: MAC entry num: 0 MNG entry num: 0 MAX non tso bd num: 8 RSS ind tbl size: 512 RSS key size: 40 RSS size: 1 Allocated RSS size: 0 Task queue pairs numbers: 1 RX buffer length: 2048 Desc num per TX queue: 1024 Desc num per RX queue: 1024 Total number of enabled TCs: 1 MAX INT QL: 0 MAX INT GL: 8160 MAX TM RATE: 100000 MAX QSET number: 1024 Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14net: hns3: refactor the debugfs processYufeng Mo
Currently, each debugfs command needs to create a file to get the information. To better support more debugfs commands, the debugfs process is reconstructed, including the process of creating dentries and files, and obtaining information. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14net: hns3: refactor out RX completion checksumHuazhong Tan
Only when RXD advanced layout is enabled, in some cases (e.g. ip fragments), the checksum of entire packet will be calculated and filled in the least significant 16 bits of the unused addr field. So refactor out the handling of RX completion checksum: adjust the location of the checksum in RX descriptor, and use ptype table to identify whether this kind of checksum is calculated. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14net: hns3: support RXD advanced layoutHuazhong Tan
Currently, the driver gets packet type by parsing the L3_ID/L4_ID/OL3_ID/OL4_ID from RX descriptor, it's time-consuming. Now some new devices support RXD advanced layout, which combines previous OL3_ID/OL4_ID to 8bit ptype field, so the driver gets packet type by looking up only one table, and L3_ID/L4_ID become reserved fields. Considering compatibility, the firmware will report capability of RXD advanced layout, the driver will identify and enable it by default. This patch provides basic function: identify and enable the RXD advanced layout, and refactor out hns3_rx_checksum() by using ptype table to handle RX checksum if supported. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14net: thunderx: Drop unnecessary NULL check after container_ofGuenter Roeck
The result of container_of() operations is never NULL unless the embedded element is the first element of the structure. This is not the case here. The NULL check is therefore unnecessary and misleading. Remove it. This change was made automatically with the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14sfc: don't use netif_info et al before net_device is registeredHeiner Kallweit
Using netif_info() before the net_device is registered results in ugly messages like the following: sfc 0000:01:00.1 (unnamed net_device) (uninitialized): Solarflare NIC detected Therefore use pci_info() et al until net_device is registered. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14net: bridge: fix build when IPv6 is disabledMatteo Croce
The br_ip6_multicast_add_router() prototype is defined only when CONFIG_IPV6 is enabled, but the function is always referenced, so there is this build error with CONFIG_IPV6 not defined: net/bridge/br_multicast.c: In function ‘__br_multicast_enable_port’: net/bridge/br_multicast.c:1743:3: error: implicit declaration of function ‘br_ip6_multicast_add_router’; did you mean ‘br_ip4_multicast_add_router’? [-Werror=implicit-function-declaration] 1743 | br_ip6_multicast_add_router(br, port); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ | br_ip4_multicast_add_router net/bridge/br_multicast.c: At top level: net/bridge/br_multicast.c:2804:13: warning: conflicting types for ‘br_ip6_multicast_add_router’ 2804 | static void br_ip6_multicast_add_router(struct net_bridge *br, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ net/bridge/br_multicast.c:2804:13: error: static declaration of ‘br_ip6_multicast_add_router’ follows non-static declaration net/bridge/br_multicast.c:1743:3: note: previous implicit declaration of ‘br_ip6_multicast_add_router’ was here 1743 | br_ip6_multicast_add_router(br, port); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this build error by moving the definition out of the #ifdef. Fixes: a3c02e769efe ("net: bridge: mcast: split multicast router state for IPv4 and IPv6") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14net: bridge: fix br_multicast_is_router stub when igmp is disabledNikolay Aleksandrov
br_multicast_is_router takes two arguments when bridge IGMP is enabled and just one when it's disabled, fix the stub to take two as well. Fixes: 1a3065a26807 ("net: bridge: mcast: prepare is-router function for mcast router split") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: mana: Use struct_size() in kzalloc()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13bpf: Use struct_size() in kzalloc()Gustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version, in order to avoid any potential type mistakes or integer overflows that, in the worst scenario, could lead to heap overflows. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: caif: Drop unnecessary NULL check after container_ofGuenter Roeck
The first parameter passed to chnl_recv_cb() can never be NULL since all callers dereferenced it. Consequently, container_of() on it is also never NULL, even though the reference into the structure points to the first element of the structure. The NULL check is therefore unnecessary. On top of that, it is misleading to perform a NULL check on the result of container_of() because the position of the contained element could change, which would make the test invalid. Remove the unnecessary NULL check. This change was made automatically with the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: qed: remove redundant initialization of variable rcColin Ian King
The variable rc is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13Merge branch 'virtio_net-fixes'David S. Miller
Xuan Zhuo says: ==================== virtio-net: fix for build_skb() The logic of this piece is really messy. Fortunately, my refactored patch can be completed with a small amount of testing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13virtio-net: get build_skb() buf by data ptrXuan Zhuo
In the case of merge, the page passed into page_to_skb() may be a head page, not the page where the current data is located. So when trying to get the buf where the data is located, you should directly use the pointer(p) to get the address corresponding to the page. At the same time, the offset of the data in the page should also be obtained using offset_in_page(). This patch solves this problem. But if you don’t use this patch, the original code can also run, because if the page is not the page of the current data, the calculated tailroom will be less than 0, and will not enter the logic of build_skb() . The significance of this patch is to modify this logical problem, allowing more situations to use build_skb(). Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13virtio-net: fix for unable to handle page fault for addressXuan Zhuo
In merge mode, when xdp is enabled, if the headroom of buf is smaller than virtnet_get_headroom(), xdp_linearize_page() will be called but the variable of "headroom" is still 0, which leads to wrong logic after entering page_to_skb(). [ 16.600944] BUG: unable to handle page fault for address: ffffecbfff7b43c8[ 16.602175] #PF: supervisor read access in kernel mode [ 16.603350] #PF: error_code(0x0000) - not-present page [ 16.604200] PGD 0 P4D 0 [ 16.604686] Oops: 0000 [#1] SMP PTI [ 16.605306] CPU: 4 PID: 715 Comm: sh Tainted: G B 5.12.0+ #312 [ 16.606429] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/04 [ 16.608217] RIP: 0010:unmap_page_range+0x947/0xde0 [ 16.609014] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065 [ 16.611863] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286 [ 16.612720] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359 [ 16.613853] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005 [ 16.614976] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030 [ 16.616124] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f [ 16.617276] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000 [ 16.618423] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000 [ 16.619738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.620670] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0 [ 16.621792] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.622920] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.624047] Call Trace: [ 16.624525] ? release_pages+0x24d/0x730 [ 16.625209] unmap_single_vma+0xa9/0x130 [ 16.625885] unmap_vmas+0x76/0xf0 [ 16.626480] exit_mmap+0xa0/0x210 [ 16.627129] mmput+0x67/0x180 [ 16.627673] do_exit+0x3d1/0xf10 [ 16.628259] ? do_user_addr_fault+0x231/0x840 [ 16.629000] do_group_exit+0x53/0xd0 [ 16.629631] __x64_sys_exit_group+0x1d/0x20 [ 16.630354] do_syscall_64+0x3c/0x80 [ 16.630988] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.631828] RIP: 0033:0x7f1a043d0191 [ 16.632464] Code: Unable to access opcode bytes at RIP 0x7f1a043d0167. [ 16.633502] RSP: 002b:00007ffe3d993308 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 16.634737] RAX: ffffffffffffffda RBX: 00007f1a044c9490 RCX: 00007f1a043d0191 [ 16.635857] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 [ 16.636986] RBP: 0000000000000000 R08: ffffffffffffff88 R09: 0000000000000001 [ 16.638120] R10: 0000000000000008 R11: 0000000000000246 R12: 00007f1a044c9490 [ 16.639245] R13: 0000000000000001 R14: 00007f1a044c9968 R15: 0000000000000000 [ 16.640408] Modules linked in: [ 16.640958] CR2: ffffecbfff7b43c8 [ 16.641557] ---[ end trace bc4891c6ce46354c ]--- [ 16.642335] RIP: 0010:unmap_page_range+0x947/0xde0 [ 16.643135] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065 [ 16.645983] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286 [ 16.646845] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359 [ 16.647970] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005 [ 16.649091] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030 [ 16.650250] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f [ 16.651394] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000 [ 16.652529] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000 [ 16.653887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.654841] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0 [ 16.655992] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.657150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.658290] Kernel panic - not syncing: Fatal exception [ 16.659613] Kernel Offset: disabled [ 16.660234] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13Merge branch 'atl1c-support-for-Mikrotik-10-25G-NIC-features'David S. Miller
Gatis Peisenieks says: ==================== atl1c: support for Mikrotik 10/25G NIC features The new Mikrotik 10/25G NIC maintains compatibility with existing atl1c driver. However it does have new features. This patch set adds support for reporting cards higher link speed, max-mtu, enables rx csum offload and improves tx performance. v2: - fixed xmit_more handling as pointed out by Eric Dumazet - added a more reliable link detection on Mikrotik 10/25G NIC since MDIO op emulation can occasionally fail Guangbin Huang says: ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13atl1c: improve link detection reliability on Mikrotik 10/25G NICGatis Peisenieks
Mikrotik 10/25G NIC emulates the MDIO accesses, but the emulation is not 100% reliable - the MDIO ops occasionally can timeout. This adds a reliable way of detecting link on Mikrotik 10/25G NIC. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13atl1c: enable rx csum offload on Mikrotik 10/25G NICGatis Peisenieks
Mikrotik 10/25G NIC supports hw checksum verification on rx for IP/IPv6 + TCP/UDP packets. HW checksum offload helps reduce host cpu load. This enables the csum offload specifically for Mikrotik 10/25G NIC as other HW supported by the driver is known to have problems with it. TCP iperf3 to Threadripper 3960X with NIC improved 16.5 -> 20.0 Gbps with mtu=1500. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13atl1c: adjust max mtu according to Mikrotik 10/25G NIC abilityGatis Peisenieks
The new Mikrotik 10/25G NIC supports jumbo frames. Jumbo frames are supported for TSO as well. This enables the support for mtu up to 9500 bytes. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13atl1c: improve performance by avoiding unnecessary pcie writes on xmitGatis Peisenieks
The kernel has xmit_more facility that hints the networking driver xmit path about whether more packets are coming soon. This information can be used to avoid unnecessary expensive PCIe transaction per tx packet. Max TX pps on Mikrotik 10/25G NIC in a Threadripper 3960X system improved from 1150Kpps to 1700Kpps. Testing L2 forwarding on AR8151 hardware did not reveal a measurable increase in latency. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13atl1c: show correct link speed on Mikrotik 10/25G NICGatis Peisenieks
The new Mikrotik 10/25G NIC maintains compatibility with existing atl1c driver. However it does have new features. This defines some new register offsets, code for identifying the new type of NIC and correct speed detection for the NIC. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13Merge branch 'hinic-cleanups'David S. Miller
Guangbin Huang says: ==================== net: hinic: some cleanups This patchset adds some cleanups for the hinic ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: hinic: fix misspelled "acessing"Guangbin Huang
The word "acessing" is misspelled, so fix it. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: hinic: remove unnecessary parenthesesGuangbin Huang
There are some unnecessary parentheses, this patch deletes them. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: hinic: add blank line after function declarationGuangbin Huang
There should be a blank line after function declaration, so add two missed blank lines. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: hinic: remove unnecessary blank lineGuangbin Huang
There are two blank lines are unnecessary, this patch removes them. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13Merge branch 'bridge-split-ipv4-ipv6-mc-router-state'David S. Miller
Linus Lüssing says: ==================== net: bridge: split IPv4/v6 mc router state and export for batman-adv The following patches are splitting the so far combined multicast router state in the Linux bridge into two ones, one for IPv4 and one for IPv6, for a more fine-grained detection of multicast routers. This avoids sending IPv4 multicast packets to an IPv6-only multicast router and avoids sending IPv6 multicast packets to an IPv4-only multicast router. This also allows batman-adv to make use of the now split information in the final patch. The first eight patches prepare the bridge code to avoid duplicate code or IPv6-#ifdef clutter for the multicast router state split. And contain no functional changes yet. The ninth patch then implements the IPv4+IPv6 multicast router state split. Patch number ten adds IPv4+IPv6 specific timers to the mdb netlink router port dump, so that the timers validity can be checked individually from userspace. The final, eleventh patch exports this now per protocol family multicast router state so that batman-adv can then later make full use of the Multicast Router Discovery (MRD) support in the Linux bridge. The batman-adv protocol format currently expects separate multicast router states for IPv4 and IPv6, therefore it depends on the first patch. batman-adv will then make use of this newly exported functions like this[0]. Regards, Linus [0]: https://git.open-mesh.org/batman-adv.git/shortlog/refs/heads/linus/multicast-routeable-mrd -> https://git.open-mesh.org/batman-adv.git/commit/d4bed3a92427445708baeb1f2d1841c5fb816fd4 Changelog v3: * Patch 01/11: * fixed/added missing rename of br->router_list to br->ip4_mc_router_list in br_multicast_flood() * Patch 02/11: * moved inline functions from br_forward.c to br_private.h * Patch 03/11: * removed inline attribute from functions added to br_mdb.c * Patch 04/11: * unchanged * Patch 05/11: * converted if()'s into switch-case in br_multicast_is_router() * Patch 06/11: * removed inline attribute from function added to br_multicast.c * Patch 07/11: * added missing static attribute to function br_ip4_multicast_get_rport_slot() added to br_multicast.c * Patch 08/11: * removed inline attribute from function added to br_multicast.c * Patch 09/11: * added missing static attribute to function br_ip6_multicast_get_rport_slot() added to br_multicast.c * removed inline attribute from function added to br_multicast.c * Patch 10/11: * unchanged * Patch 11/11: * simplified bridge check in br_multicast_has_router_adjacent() by using br_port_get_check_rcu() * added missing declaration for br_multicast_has_router_adjacent() in include/linux/if_bridge.h Changelog v2: * split into multiple patches as suggested by Nikolay * added helper functions to br_multicast_flood(), avoiding IPv6 #ifdef clutter * fixed reverse xmas tree ordering in br_rports_fill_info() and added helper functions to avoid IPv6 #ifdef clutter * Added a common br_multicast_add_router() and a helper function to retrieve the correct slot to avoid duplicate code for an ip4 and ip6 variant * replaced the "1" and "2" constants in br_multicast_is_router() with the appropriate enums * added br_{ip4,ip6}_multicast_rport_del() wrappers to reduce IPv6 #ifdef clutter * added return values to br_*multicast_rport_del() to only notify if the port was actually removed and did not race with a readdition somewhere else * added empty, void br_ip6_multicast_mark_router() if compiled without IPv6, to reduce IPv6 #ifdef clutter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: export multicast router presence adjacent to a portLinus Lüssing
To properly support routable multicast addresses in batman-adv in a group-aware way, a batman-adv node needs to know if it serves multicast routers. This adds a function to the bridge to export this so that batman-adv can then make full use of the Multicast Router Discovery capability of the bridge. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: add ip4+ip6 mcast router timers to mdb netlinkLinus Lüssing
Now that we have split the multicast router state into two, one for IPv4 and one for IPv6, also add individual timers to the mdb netlink router port dump. Leaving the old timer attribute for backwards compatibility. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: split multicast router state for IPv4 and IPv6Linus Lüssing
A multicast router for IPv4 does not imply that the same host also is a multicast router for IPv6 and vice versa. To reduce multicast traffic when a host is only a multicast router for one of these two protocol families, keep router state for IPv4 and IPv6 separately. Similar to how querier state is kept separately. For backwards compatibility for netlink and switchdev notifications these two will still only notify if a port switched from either no IPv4/IPv6 multicast router to any IPv4/IPv6 multicast router or the other way round. However a full netlink MDB router dump will now also include a multicast router timeout for both IPv4 and IPv6. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: split router port del+notify for mcast router splitLinus Lüssing
In preparation for the upcoming split of multicast router state into their IPv4 and IPv6 variants split router port deletion and notification into two functions. When we disable a port for instance later we want to only send one notification to switchdev and netlink for compatibility and want to avoid sending one for IPv4 and one for IPv6. For that the split is needed. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: prepare add-router function for mcast router splitLinus Lüssing
In preparation for the upcoming split of multicast router state into their IPv4 and IPv6 variants move the protocol specific router list and timer access to ip4 wrapper functions. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: prepare expiry functions for mcast router splitLinus Lüssing
In preparation for the upcoming split of multicast router state into their IPv4 and IPv6 variants move the protocol specific timer access to an ip4 wrapper function. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: prepare is-router function for mcast router splitLinus Lüssing
In preparation for the upcoming split of multicast router state into their IPv4 and IPv6 variants make br_multicast_is_router() protocol family aware. Note that for now br_ip6_multicast_is_router() uses the currently still common ip4_mc_router_timer for now. It will be renamed to ip6_mc_router_timer later when the split is performed. While at it also renames the "1" and "2" constants in br_multicast_is_router() to the MDB_RTR_TYPE_TEMP_QUERY and MDB_RTR_TYPE_PERM enums. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: prepare query reception for mcast router splitLinus Lüssing
In preparation for the upcoming split of multicast router state into their IPv4 and IPv6 variants and as the br_multicast_mark_router() will be split for that remove the select querier wrapper and instead add ip4 and ip6 variants for br_multicast_query_received(). Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: prepare mdb netlink for mcast router splitLinus Lüssing
In preparation for the upcoming split of multicast router state into their IPv4 and IPv6 variants and to avoid IPv6 #ifdef clutter later add some inline functions for the protocol specific parts in the mdb router netlink code. Also the we need iterate over the port instead of router list to be able put one router port entry with both the IPv4 and IPv6 multicast router info later. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: add wrappers for router node retrievalLinus Lüssing
In preparation for the upcoming split of multicast router state into their IPv4 and IPv6 variants and to avoid IPv6 #ifdef clutter later add two wrapper functions for router node retrieval in the payload forwarding code. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: bridge: mcast: rename multicast router lists and timersLinus Lüssing
In preparation for the upcoming split of multicast router state into their IPv4 and IPv6 variants, rename the affected variable to the IPv4 version first to avoid some renames in later commits. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RTSebastian Andrzej Siewior
__napi_schedule_irqoff() is an optimized version of __napi_schedule() which can be used where it is known that interrupts are disabled, e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer callbacks. On PREEMPT_RT enabled kernels this assumptions is not true. Force- threaded interrupt handlers and spinlocks are not disabling interrupts and the NAPI hrtimer callback is forced into softirq context which runs with interrupts enabled as well. Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole game so make __napi_schedule_irqoff() invoke __napi_schedule() for PREEMPT_RT kernels. The callers of ____napi_schedule() in the networking core have been audited and are correct on PREEMPT_RT kernels as well. Reported-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13alx: use fine-grained locking instead of RTNLJohannes Berg
In the alx driver, all locking depended on the RTNL, but that causes issues with ipconfig ("ip=..." command line) because that waits for the netdev to have a carrier while holding the RTNL, but the alx workers etc. require RTNL, so the carrier won't be set until the RTNL is dropped and can be acquired by alx workers. This causes long delays at boot, as reported by Nikolai Zhubr. Really the only sensible thing to do here is to not use the RTNL for everything, but instead have fine-grained locking for just the driver. Do that, it's not that hard. Reported-by: Nikolai Zhubr <zhubr.2@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13net: taprio offload: enforce qdisc to netdev queue mappingYannick Vignon
Even though the taprio qdisc is designed for multiqueue devices, all the queues still point to the same top-level taprio qdisc. This works and is probably required for software taprio, but at least with offload taprio, it has an undesirable side effect: because the whole qdisc is run when a packet has to be sent, it allows packets in a best-effort class to be processed in the context of a task sending higher priority traffic. If there are packets left in the qdisc after that first run, the NET_TX softirq is raised and gets executed immediately in the same process context. As with any other softirq, it runs up to 10 times and for up to 2ms, during which the calling process is waiting for the sendmsg call (or similar) to return. In my use case, that calling process is a real-time task scheduled to send a packet every 2ms, so the long sendmsg calls are leading to missed timeslots. By attaching each netdev queue to its own qdisc, as it is done with the "classic" mq qdisc, each traffic class can be processed independently without touching the other classes. A high-priority process can then send packets without getting stuck in the sendmsg call anymore. Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12tls splice: remove inappropriate flags checking for MSG_PEEKJim Ma
In function tls_sw_splice_read, before call tls_sw_advance_skb it checks likely(!(flags & MSG_PEEK)), while MSG_PEEK is used for recvmsg, splice supports SPLICE_F_NONBLOCK, SPLICE_F_MOVE, SPLICE_F_MORE, should remove this checking. Signed-off-by: Jim Ma <majinjing3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-12atm: nicstar: Fix possible use-after-free in nicstar_cleanup()Zou Wei
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11net/sched: taprio: Drop unnecessary NULL check after container_ofGuenter Roeck
The rcu_head pointer passed to taprio_free_sched_cb is never NULL. That means that the result of container_of() operations on it is also never NULL, even though rcu_head is the first element of the structure embedding it. On top of that, it is misleading to perform a NULL check on the result of container_of() because the position of the contained element could change, which would make the check invalid. Remove the unnecessary NULL check. This change was made automatically with the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11usb: class: cdc-wdm: WWAN framework integrationLoic Poulain
The WWAN framework provides a unified way to handle WWAN/modems and its control port(s). It has initially been introduced to support MHI/PCI modems, offering the same control protocols as the USB variants such as MBIM, QMI, AT... The WWAN framework exposes these control protocols as character devices, similarly to cdc-wdm, but in a bus agnostic fashion. This change adds registration of the USB modem cdc-wdm control endpoints to the WWAN framework as standard control ports (wwanXpY...). Exposing cdc-wdm through WWAN framework normally maintains backward compatibility, e.g: $ qmicli --device-open-qmi -d /dev/wwan0p1QMI --dms-get-ids instead of $ qmicli --device-open-qmi -d /dev/cdc-wdm0 --dms-get-ids However, some tools may rely on cdc-wdm driver/device name for device detection. It is then safer to keep the 'legacy' cdc-wdm character device to prevent any breakage. This is handled in this change by API mutual exclusion, only one access method can be used at a time, either cdc-wdm chardev or WWAN API. Note that unknown channel types (other than MBIM, AT or MBIM) are not registered to the WWAN framework. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11net: wwan: Add unknown port typeLoic Poulain
Some devices may have ports with unknown type/protocol which need to be tagged (though not supported by WWAN core). This will be the case for cdc-wdm based drivers. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11mISDN: fix possible use-after-free in HFC_cleanup()Zou Wei
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-11atm: iphase: fix possible use-after-free in ia_module_exit()Zou Wei
This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-10Merge branch 'mvpp2-warnings'David S. Miller
Matteo Croce says: ==================== mvpp2: resolve two warnings Just two small changes to suppress two warnings. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-05 10:36:14 +0000