summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-05V4L/DVB (13388): gspca - pac7302: Add white balance control.Marton Nemeth
Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13387): gspca - main: Fix a compilation warning.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13386): gspca - main: Change version to 2.8.0.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13385): gspca - pac7302: Add red and blue balance control.Márton Németh
The valid values for these controls are 0..3 (lower two bits) which was identified by trial and error on Labtec Webcam 2200 (USB ID 093a:2626). The upper 6 bits are ignored on page 0, registers 0xc5 and 0xc7 by the camera. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13384): gspca - sonixj: Optimize code and add some comments.Jean-Francois Moine
- the i2c base address is now taken from the sn9c1xx register table Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13383): gspca - pac7311/pac7302: Propagate error to higher level ↵Márton Németh
software. The usb_control_msg() can fail any time. Only continue writing sequence if there was no error with the previous write. If there was any problem stop sending URBs and propagate the error to the gspca_main. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13382): gspca - pac7302: Remove redundant stream off command.Márton Németh
The stream off command is sent to the device twice, one is enough. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13380): sms-cards: make id unsigned in sms_get_board()Roel Kluin
Make id signed so we can't get an invalid pointer when we pass a negative id. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13379): quickcam_messenger: possible buffer overflow while use strncatAlexander Strakh
In driver ./drivers/media/video/usbvideo/quickcam_messenger.c in line 91: 91 usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); After this line we use strncat: 92 strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); where sizeof(cam->input_physname) returns length of cam->input_phisname without length for null-symbol. But this parameter must be - "maximum numbers of bytes to copy", i.e.: sizeof(cam->input_physname)-strlen(cam->input_physname)-1. In this case, after call to usb_make_path the similar drivers use strlcat. Like in: drivers/hid/usbhid/hid-core.c: 1152 usb_make_path(dev, hid->phys, sizeof(hid->phys)); 1153 strlcat(hid->phys, "/input", sizeof(hid->phys)); Found by Linux Driver Verification Project. Use strlcat instead of strncat. Signed-off-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13378): konicawc.c: possible buffer overflow while use strncatAlexander Strakh
In driver ./drivers/media/video/usbvideo/konicawc.c in line 227: 227 usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); After this line we use strncat: 228 strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); where sizeof(cam->input_physname) returns length of cam->input_phisname without length for null-symbol. But this parameter must be - "maximum numbers of bytes to copy", i.e.: sizeof(cam->input_physname)-strlen(cam->input_physname)-1. In this case, after call to usb_make_path the similar drivers use strlcat. Like in drivers/hid/usbhid/hid-core.c: 1152 usb_make_path(dev, hid->phys, sizeof(hid->phys)); 1153 strlcat(hid->phys, "/input", sizeof(hid->phys)); Found by Linux Driver Verification Project. Use strlcat instead of strncat. Signed-off-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13377): make struct videobuf_queue_ops constantJonathan Corbet
The videobuf_queue_ops function vector is not declared constant, but there's no need for the videobuf layer to ever change it. Make it const so that videobuf users can make their operations const without warnings. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13376): cx-usb: add Mygica D689 DMB-TH USB supportDavid Wong
X-Patchwork-Id: 55873 Add support for cxusb card Mygica D689 DBM-TH USB Signed-off-by: David T. L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13375): cx23885: Add support for Mygica X8558Pro DMB-THDavid T. L. Wong
Adds support for cx23885 card Mygica X8558 Pro DMB-TH Signed-off-by: David T. L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13374): AltoBeam ATBM8830 GB20600-2006(DMB-TH) demodulatorDavid T.L. Wong
Adds support for Maxim MAX2165 silicon tuner. It was tested on Mygica X8558Pro, which has MAX2165, ATBM8830 and CX23885. Signed-off-by: David T. L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13373): Maxium MAX2165 silicon tunerDavid T.L. Wong
Adds support for Maxim MAX2165 silicon tuner. It is tested on Mygica X8558Pro, which has MAX2165, ATBM8830 and CX23885 Signed-off-by: David T. L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13368): af9015: support for Sveon STV20 Tuner USB DVB-T HDTVIgnacio de Miguel Diaz
Add USB ID 1b80:e39d for Sveon STV20 Tuner USB DVB-T HDTV. Signed-off-by: Ignacio de Miguel Diaz <imigueldiaz@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13364): ec168: add new driver for E3C EC168 DVB USBAntti Palosaari
E3C EC168 DVB USB driver Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13363): ec100: add new driver for E3C EC100 DVB-T demodulatorAntti Palosaari
E3C EC100 DVB-T demodulator driver Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13361): stv090x: fix TS corruption with High Symbol Rate streamsManu Abraham
With a lower bandwidth setup, the Transport Stream gets corrupted due to TSFIFO overrun. The patch fixes the issue. The issue is seen with Transport Streams having a Symbol Rate of 22MSPS and/or greater. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13360): stv090x: fix the calculation of the r divider in ↵Andreas Regel
stv6110x_set_frequency It had always the value 3 no matter what frequency was given. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13359): stv090x: adds corrections of some register valuesAndreas Regel
While here, also do some blind scan related fixes. Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13358): stv090x: add an additional check for packet delineator lock ↵Andreas Regel
in stv090x_read_status in case of a tuned DVB-S2 signal Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13357): stv090x: adds an additional check for signal presence based ↵Andreas Regel
on AGC1 Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13356): stv090x: fixes signal lock logicAndreas Regel
This patch contains several fixes for the stv090x driver: - added missing else - use calculated timeout instead of fixed one - use correct frequency when doing zigzag scan - added missing read of GENCFG register Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13355): stv090x: fixes calculation of AGC2 and uses a different ↵Andreas Regel
AGC2 threshold for cut 3 chips Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13354): stv090x: fixes some typos like wrong register or variable namesAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13353): stv090x: fixes STR and SNR calculation and normalizes the ↵Andreas Regel
value into the 0..0xFFFF range Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13352): stv090x: fixes errors and typos in register definitionsAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13351): stv090x: increases search range based on symbol rateAndreas Regel
Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13349): cx23885: Enable IR input keypress handling for the ↵Michael Krufky
Hauppauge WinTV HVR-1290 The IR on the HVR-1290 is identical to that of the HVR-1850 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13348): cx23885: update model matrix for models 85021 and 85721Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13347): cx23885: add digital television support for Hauppauge ↵Michael Krufky
WinTV-HVR1290 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13341): stv0900: big rework to support cut 3.0.Igor M. Liplianin
Patch 4 of 4. Also patch changes logic to prevent code repetitions and big indents. It makes checkpatch silent :) Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13340): stv0900: big rework to support cut 3.0.Igor M. Liplianin
Patch 3 of 4. Also patch changes logic to prevent code repetitions and big indents. It makes checkpatch silent :) Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13339): stv0900: big rework to support cut 3.0.Igor M. Liplianin
Patch 2 of 4. Also patch changes logic to prevent code repetitions and big indents. It makes checkpatch silent :) Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13338): stv0900: big rework to support cut 3.0.Igor M. Liplianin
Patch 1 of 4. Also patch changes logic to prevent code repetitions and big indents. It makes checkpatch silent :) Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13337): Change str snr scale for stv0900/903 and Netup Dual DVB-S2 ↵Igor M. Liplianin
card. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13336): stv0900: config definition for single/dual modeIgor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13335): stv0900: fix diseqc support for NetUP cardAbylay Ospan
Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13334): stv6110: add configurable gainAbylay Ospan
It has positive effect for NetUP Dual DVB-S2 CI card. Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13332): s5h1409: remove a set register that would cause lock to be ↵Devin Heitmueller
lost. On particularly weak signals, changing register 0xab after setting the interleave mode will cause the FEC lock to get lost (while still holding the EQ lock). So remove the write entirely, which seems to have had no adverse effect in either of my ClearQAM environments (and in particular resolves the customer's reported issue). Also flip around the order of the amhum optimization and the interleave setup to be consistent with the windows driver, which has the side-benefit of doing them both in the same call (since the amhum optimization can only be done once the interleave setup). This work was sponsored by ONELAN Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13331): mxl5005s: provide ability to override QAM gain for HVR-1600Devin Heitmueller
The HVR-1600 doesn't use the standard mechanism for computing the gain when in QAM mode, instead always forcing it to be 0x02. Provide the ability to override the algorithm on a per-board basis. This change results in an improvement of 0.4-0.6 dB for QAM tuning. This work was sponsored by ONELAN Limited. Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13330): s5h1409: properly handle QAM optimization after lock achievedDevin Heitmueller
The sh51409 driver was only doing the QAM optimization a single time, and it would only occur if you received a lock instantaneously after the tuning request. Restructure the code so that the optimization occurs once you reach a signal lock. Note that this depends on the caller polling for status, but we don't have much choice at this point without an independent thread monitoring the lock status. Also, at this point pretty much every application polls for status lock after doing the tune, so the likelihood of the optimization not occurring in the real world is pretty low. The state machine has also been reworked such that setting the interleave mode is now a dependency of doing the QAM optimization. Before both were mutually exclusive, which was not consistent with the Windows driver. We now have a single state machine that controls both. The changes as-is are only enabled for the HVR-1600. Once the changes are tested with some of the other boards, this change should be made generic and the "_legacy" functions should be removed. This work was sponsored by ONELAN Limited. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13329): s5h1409: provide HVR-1600 specific optimizationsDevin Heitmueller
Perform some optimization of the register configuration based on a trace of the HVR-1600 Windows i2c traffic (and consultation with Steven Toth). Note that some of these values may be able to be moved into the common driver, but I am holding off on that until they can be tested with other boards. This work was sponsored by ONELAN Limited. Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13328): em28xx: Add chip ID for em2800Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13327): em28xx: fix alt modprobe parameterMauro Carvalho Chehab
It seems that some patch broke alt modprobe parameter. Fix it to allow changing alternate interfaces during module load and at runtime. If changed during runtime, you'll need to stop a and restart stream for the parameter to be used. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13325): gspca - pac7302/pac7311: Fix buffer overrun.Marton Nemeth
The reg_w_seq() function expects the sequence length in entries and not in bytes. One entry in init_7302 and init_7311 is two bytes and not one. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13324): gspca - pac7302/pac7311: Handle return value of ↵Marton Nemeth
usb_control_msg(). The function usb_control_msg() can return error any time so at least warn the user if an error happens. No message is printed in case of normal operation. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13323): gspca - zc3xx: Adjust the exchanges of sensors mi0360soc ↵Jean-Francois Moine
and pb0330. - the pb03303x exchanges were the mi0360soc ones - add the new sensor mi0360soc - the new exchanges are taken from the info file of the ms-win driver of the webcams 0ac8:301b and 0ac8:303b (vm30x.inf) Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13310): uvcvideo: Return -EINVAL instead of -ENODEV in read()Laurent Pinchart
-EINVAL is required by the V4L2 specification. -ENODEV is simply wrong as the device exists. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 23:29:02 +0000