summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-25selftests/bpf: make sure signal interrupts BPF_PROG_TEST_RUNStanislav Fomichev
Simple test that I used to reproduce the issue in the previous commit: Do BPF_PROG_TEST_RUN with max iterations, each program is 4096 simple move instructions. File alarm in 0.1 second and check that bpf_prog_test_run is interrupted (i.e. test doesn't hang). Note: reposting this for bpf-next to avoid linux-next conflict. In this version I test both BPF_PROG_TYPE_SOCKET_FILTER (which uses generic bpf_test_run implementation) and BPF_PROG_TYPE_FLOW_DISSECTOR (which has it own loop with preempt handling in bpf_prog_test_run_flow_dissector). Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-25bpf/test_run: fix unkillable BPF_PROG_TEST_RUN for flow dissectorStanislav Fomichev
Syzbot found out that running BPF_PROG_TEST_RUN with repeat=0xffffffff makes process unkillable. The problem is that when CONFIG_PREEMPT is enabled, we never see need_resched() return true. This is due to the fact that preempt_enable() (which we do in bpf_test_run_one on each iteration) now handles resched if it's needed. Let's disable preemption for the whole run, not per test. In this case we can properly see whether resched is needed. Let's also properly return -EINTR to the userspace in case of a signal interrupt. This is a follow up for a recently fixed issue in bpf_test_run, see commit df1a2cb7c74b ("bpf/test_run: fix unkillable BPF_PROG_TEST_RUN"). Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-25bpf: test_bpf: turn off preemption in function __run_onceAnders Roxell
When running BPF test suite the following splat occurs: [ 415.930950] test_bpf: #0 TAX jited:0 [ 415.931067] BUG: assuming atomic context at lib/test_bpf.c:6674 [ 415.946169] in_atomic(): 0, irqs_disabled(): 0, pid: 11556, name: modprobe [ 415.953176] INFO: lockdep is turned off. [ 415.957207] CPU: 1 PID: 11556 Comm: modprobe Tainted: G W 5.0.0-rc7-next-20190220 #1 [ 415.966328] Hardware name: HiKey Development Board (DT) [ 415.971592] Call trace: [ 415.974069] dump_backtrace+0x0/0x160 [ 415.977761] show_stack+0x24/0x30 [ 415.981104] dump_stack+0xc8/0x114 [ 415.984534] __cant_sleep+0xf0/0x108 [ 415.988145] test_bpf_init+0x5e0/0x1000 [test_bpf] [ 415.992971] do_one_initcall+0x90/0x428 [ 415.996837] do_init_module+0x60/0x1e4 [ 416.000614] load_module+0x1de0/0x1f50 [ 416.004391] __se_sys_finit_module+0xc8/0xe0 [ 416.008691] __arm64_sys_finit_module+0x24/0x30 [ 416.013255] el0_svc_common+0x78/0x130 [ 416.017031] el0_svc_handler+0x38/0x78 [ 416.020806] el0_svc+0x8/0xc Rework so that preemption is disabled when we loop over function 'BPF_PROG_RUN(...)'. Fixes: 568f196756ad ("bpf: check that BPF programs run with preemption disabled") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22samples/bpf: Fix dummy program unloading for xdp_redirect samplesToke Høiland-Jørgensen
The xdp_redirect and xdp_redirect_map sample programs both load a dummy program onto the egress interfaces. However, the unload code checks these programs against the wrong id number, and thus refuses to unload them. Fix the comparison to avoid this. Fixes: 3b7a8ec2dec3 ("samples/bpf: Check the prog id before exiting") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22seccomp, bpf: disable preemption before calling into bpf progAlexei Starovoitov
All BPF programs must be called with preemption disabled. Fixes: 568f196756ad ("bpf: check that BPF programs run with preemption disabled") Reported-by: syzbot+8bf19ee2aa580de7a2a7@syzkaller.appspotmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-19bpf: add skb->queue_mapping write access from tc clsactJesper Dangaard Brouer
The skb->queue_mapping already have read access, via __sk_buff->queue_mapping. This patch allow BPF tc qdisc clsact write access to the queue_mapping via tc_cls_act_is_valid_access. Also handle that the value NO_QUEUE_MAPPING is not allowed. It is already possible to change this via TC filter action skbedit tc-skbedit(8). Due to the lack of TC examples, lets show one: # tc qdisc add dev ixgbe1 clsact # tc filter add dev ixgbe1 ingress matchall action skbedit queue_mapping 5 # tc filter list dev ixgbe1 ingress The most common mistake is that XPS (Transmit Packet Steering) takes precedence over setting skb->queue_mapping. XPS is configured per DEVICE via /sys/class/net/DEVICE/queues/tx-*/xps_cpus via a CPU hex mask. To disable set mask=00. The purpose of changing skb->queue_mapping is to influence the selection of the net_device "txq" (struct netdev_queue), which influence selection of the qdisc "root_lock" (via txq->qdisc->q.lock) and txq->_xmit_lock. When using the MQ qdisc the txq->qdisc points to different qdiscs and associated locks, and HARD_TX_LOCK (txq->_xmit_lock), allowing for CPU scalability. Due to lack of TC examples, lets show howto attach clsact BPF programs: # tc qdisc add dev ixgbe2 clsact # tc filter add dev ixgbe2 egress bpf da obj XXX_kern.o sec tc_qmap2cpu # tc filter list dev ixgbe2 egress Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-19bpf: check that BPF programs run with preemption disabledPeter Zijlstra
Introduce cant_sleep() macro for annotation of functions that cannot sleep. Use it in BPF_PROG_RUN to catch execution of BPF programs in preemptable context. Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-19bpf: bpftool, fix documentation for attach typesAlban Crequy
bpftool has support for attach types "stream_verdict" and "stream_parser" but the documentation was referring to them as "skb_verdict" and "skb_parse". The inconsistency comes from commit b7d3826c2ed6 ("bpf: bpftool, add support for attaching programs to maps"). This patch changes the documentation to match the implementation: - "bpftool prog help" - man pages - bash completion Signed-off-by: Alban Crequy <alban@kinvolk.io> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-18bnx2x: Remove set but not used variable 'mfw_vn'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c: In function 'bnx2x_get_hwinfo': drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:11940:10: warning: variable 'mfw_vn' set but not used [-Wunused-but-set-variable] It's never used since introduction. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18Merge branch 'net-phy-add-helpers-for-handling-C45-10GBT-AN-register-values'David S. Miller
Heiner Kallweit says: ==================== net: phy: add helpers for handling C45 10GBT AN register values Similar to the existing helpers for the Clause 22 registers add helpers to deal with converting Clause 45 advertisement registers to / from link mode bitmaps. Note that these helpers are defined in linux/mdio.h, not like the Clause 22 helpers in linux/mii.h. Reason is that the Clause 45 register constants are defined in uapi/linux/mdio.h. And uapi/linux/mdio.h includes linux/mii.h before defining the C45 register constants. v2: - Remove few helpers which aren't used by this series. They will follow together with the users. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18net: phy: use mii_10gbt_stat_mod_linkmode_lpa_t in genphy_c45_read_lpaHeiner Kallweit
Use mii_10gbt_stat_mod_linkmode_lpa_t() in genphy_c45_read_lpa() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18net: phy: add helper mii_10gbt_stat_mod_linkmode_lpa_tHeiner Kallweit
Similar to the existing helpers for the Clause 22 registers add helper mii_10gbt_stat_mod_linkmode_lpa_t. Note that this helper is defined in linux/mdio.h, not like the Clause 22 helpers in linux/mii.h. Reason is that the Clause 45 register constants are defined in uapi/linux/mdio.h. And uapi/linux/mdio.h includes linux/mii.h before defining the C45 register constants. v2: - remove helpers that don't have users in this series Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18liquidio: using NULL instead of plain integerYueHaibing
Fix following warning: drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1453:35: warning: Using plain integer as NULL pointer drivers/net/ethernet/cavium/liquidio/lio_main.c:2910:23: warning: Using plain integer as NULL pointer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18r8169: remove unneeded mmiowb barriersHeiner Kallweit
writex() has implicit barriers, that's what makes it different from writex_relaxed(). Therefore these calls to mmiowb() can be removed. This patch was recently reverted due to a dependency with another problematic patch. But because it didn't contribute to the problem it was rebased and can be resubmitted. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18net: dsa: Implement flow_dissect callback for tag_dsa.Rundong Ge
RPS not work for DSA devices since the 'skb_get_hash' will always get the invalid hash for dsa tagged packets. "[PATCH] tag_mtk: add flow_dissect callback to the ops struct" introduced the flow_dissect callback to get the right hash for MTK tagged packet. Tag_dsa and tag_edsa also need to implement the callback. Signed-off-by: Rundong Ge <rdong.ge@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18net: sched: using kfree_rcu() to simplify the codeWei Yongjun
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18mdio_bus: Fix PTR_ERR() usage after initialization to constantYueHaibing
Fix coccinelle warning: ./drivers/net/phy/mdio_bus.c:51:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44 ./drivers/net/phy/mdio_bus.c:52:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44 fix this by using IS_ERR before PTR_ERR Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18mlxsw: spectrum: Change IP2ME CPU policer rate and burst size valuesShalom Toledo
The IP2ME packet trap is triggered by packets hitting local routes. After evaluating current defaults used by the driver it was decided to reduce the amount of traffic generated by this trap to 1Kpps and increase the burst size. This is inline with similarly deployed systems. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18net: hamradio: remove unused hweight*() definesMasahiro Yamada
This file does not use hweight*() at all, and the definition is surrounded by #if 0 ... #endif. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for you net-next tree: 1) Missing NFTA_RULE_POSITION_ID netlink attribute validation, from Phil Sutter. 2) Restrict matching on tunnel metadata to rx/tx path, from wenxu. 3) Avoid indirect calls for IPV6=y, from Florian Westphal. 4) Add two indirections to prepare merger of IPV4 and IPV6 nat modules, from Florian Westphal. 5) Broken indentation in ctnetlink, from Colin Ian King. 6) Patches to use struct_size() from netfilter and IPVS, from Gustavo A. R. Silva. 7) Display kernel splat only once in case of racing to confirm conntrack from bridge plus nfqueue setups, from Chieh-Min Wang. 8) Skip checksum validation for layer 4 protocols that don't need it, patch from Alin Nastac. 9) Sparse warning due to symbol that should be static in CLUSTERIP, from Wei Yongjun. 10) Add new toggle to disable SDP payload translation when media endpoint is reachable though the same interface as the signalling peer, from Alin Nastac. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: hns3: make function hclge_set_all_vf_rst() staticWei Yongjun
Fixes the following sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:2431:5: warning: symbol 'hclge_set_all_vf_rst' was not declared. Should it be static? Fixes: aa5c4f175be6 ("net: hns3: add reset handling for VF when doing PF reset") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17ptr_ring: remove duplicated include from ptr_ring.hYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: sgi: use GFP_ATOMIC under spin lockWei Yongjun
The function meth_init_tx_ring() is called from meth_tx_timeout(), in which spin_lock is held, so we should use GFP_ATOMIC instead. Fixes: 8d4c28fbc284 ("meth: pass struct device to DMA API functions") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: sched: sch_api: set an error msg when qdisc_alloc_handle() failsIvan Vecera
This patch sets an error message in extack when the number of qdisc handles exceeds the maximum. Also the error-code ENOSPC is more appropriate than ENOMEM in this situation. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reported-by: Li Shuang <shuali@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: marvell10g: Don't explicitly set Pause and Asym_PauseMaxime Chevallier
The PHY core expects PHY drivers not to set Pause and Asym_Pause bits, unless the driver only wants to specify one of them due to HW limitation. In the case of the Marvell10g driver, we don't need to set them. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: dsa: bcm_sf2: Remove set but not used variables 'v6_spec, v6_m_spec'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/dsa/bcm_sf2_cfp.c: In function 'bcm_sf2_cfp_ipv6_rule_set': drivers/net/dsa/bcm_sf2_cfp.c:606:40: warning: variable 'v6_m_spec' set but not used [-Wunused-but-set-variable] drivers/net/dsa/bcm_sf2_cfp.c:606:30: warning: variable 'v6_spec' set but not used [-Wunused-but-set-variable] It not used any more after commit e4f7ef54cbd8 ("dsa: bcm_sf2: use flow_rule infrastructure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17nfp: flower: fix masks for tcp and ip flags fieldsPieter Jansen van Vuuren
Check mask fields of tcp and ip flags when setting the corresponding mask flag used in hardware. Fixes: 8f2566225ae2 ("flow_offload: add flow_rule and flow_match") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17Merge branch 'devlink-add-the-ability-to-update-device-flash'David S. Miller
Jakub Kicinski says: ==================== devlink: add the ability to update device flash This series is the second step to allow trouble shooting and recovering devices in bad state without the use of netdevs as handles. We can already query FW versions over devlink, now we add the ability to update the FW. This will allow drivers to implement some from of "limp-mode" where the device can't really be used for networking and hence has no netdev, but we can interrogate it over devlink and fix the broken FW. Small but nice advantage of devlink is that it only holds the devlink instance lock during flashing, unlike ethtool which holds rtnl_lock(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17nfp: devlink: allow flashing the device via devlinkJakub Kicinski
Devlink now allows updating device flash. Implement this callback. Compared to ethtool update we no longer have to release the networking locks - devlink doesn't take them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17ethtool: add compat for flash updateJakub Kicinski
If driver does not support ethtool flash update operation call into devlink. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17devlink: add flash update commandJakub Kicinski
Add devlink flash update command. Advanced NICs have firmware stored in flash and often cryptographically secured. Updating that flash is handled by management firmware. Ethtool has a flash update command which served us well, however, it has two shortcomings: - it takes rtnl_lock unnecessarily - really flash update has nothing to do with networking, so using a networking device as a handle is suboptimal, which leads us to the second one: - it requires a functioning netdev - in case device enters an error state and can't spawn a netdev (e.g. communication with the device fails) there is no netdev to use as a handle for flashing. Devlink already has the ability to report the firmware versions, now with the ability to update the firmware/flash we will be able to recover devices in bad state. To enable updates of sub-components of the FW allow passing component name. This name should correspond to one of the versions reported in devlink info. v1: - replace target id with component name (Jiri). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17Merge branch 'net-phy-improve-and-use-phy_resolve_aneg_linkmode'David S. Miller
Heiner Kallweit says: ==================== net: phy: improve and use phy_resolve_aneg_linkmode Improve phy_resolve_aneg_linkmode and use it in genphy_read_status. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: use phy_resolve_aneg_linkmode in genphy_read_statusHeiner Kallweit
Now that we have phy_resolve_aneg_linkmode() we can make genphy_read_status() much simpler. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: improve phy_resolve_aneg_linkmodeHeiner Kallweit
We have the settings array of modes which is sorted based on aneg priority. Instead of checking each mode manually let's simply iterate over the sorted settings. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: sched: cgroup: verify that filter is not NULL during walkVlad Buslov
Check that filter is not NULL before passing it to tcf_walker->fn() callback in cls_cgroup_walk(). This can happen when cls_cgroup_change() failed to set first filter. Fixes: ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: sched: matchall: verify that filter is not NULL in mall_walk()Vlad Buslov
Check that filter is not NULL before passing it to tcf_walker->fn() callback. This can happen when mall_change() failed to offload filter to hardware. Fixes: ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") Reported-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: sched: route: don't set arg->stop in route4_walk() when emptyVlad Buslov
Some classifiers set arg->stop in their implementation of tp->walk() API when empty. Most of classifiers do not adhere to that convention. Do not set arg->stop in route4_walk() to unify tp->walk() behavior among classifier implementations. Fixes: ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: sched: fw: don't set arg->stop in fw_walk() when emptyVlad Buslov
Some classifiers set arg->stop in their implementation of tp->walk() API when empty. Most of classifiers do not adhere to that convention. Do not set arg->stop in fw_walk() to unify tp->walk() behavior among classifier implementations. Fixes: ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: caif: use skb helpers instead of open-coding themJann Horn
Use existing skb_put_data() and skb_trim() instead of open-coding them, with the skb_put_data() first so that logically, `skb` still contains the data to be copied in its data..tail area when skb_put_data() reads it. This change on its own is a cleanup, and it is also necessary for potential future integration of skbuffs with things like KASAN. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17mlxsw: core: Extend thermal module with per QSFP module thermal zonesVadim Pasternak
Add a dedicated thermal zone for each QSFP/SFP module. The current temperature is obtained from the module's temperature sensor and the trip points are set based on the warning and critical thresholds read from the module. A cooling device (fan) is bound to all the thermal zones. The thermal zone governor is set to user space in order to avoid collisions between thermal zones. For example, one thermal zone might want to increase the speed of the fan, whereas another one would like to decrease it. Deferring this decision to user space allows the user to the take the most suitable decision. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17Merge branch 'neigh-tracepoints'David S. Miller
Roopa Prabhu says: ==================== tracepoints in neighbor subsystem Roopa Prabhu (2): trace: events: add a few neigh tracepoints neigh: hook tracepoints in neigh update code ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17neigh: hook tracepoints in neigh update codeRoopa Prabhu
hook tracepoints at the end of functions that update a neigh entry. neigh_update gets an additional tracepoint to trace the update flags and old and new neigh states. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17trace: events: add a few neigh tracepointsRoopa Prabhu
The goal here is to trace neigh state changes covering all possible neigh update paths. Plus have a specific trace point in neigh_update to cover flags sent to neigh_update. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17Merge branch 'net-phy-add-and-use-genphy_c45_an_config_an'David S. Miller
Heiner Kallweit says: ==================== net: phy: add and use genphy_c45_an_config_an This series adds genphy_c45_an_config_an() and uses it in the marvell10g diver. In addition patch 4 aligns the aneg configuration with what is done in genphy_config_aneg(). v2: - in patch 2 changed function name to genphy_c45_an_config_aneg - in patch 3 add a comment regarding 1000BaseT vendor registers v3: - rebase patch 3 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: marvell10g: check for newly set anegHeiner Kallweit
Even if the advertisement registers content didn't change, we may have just switched to aneg, and therefore have to trigger an aneg restart. This matches the behavior of genphy_config_aneg(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: marvell10g: use genphy_c45_an_config_anegAndrew Lunn
Use new function genphy_c45_config_aneg() in mv3310_config_aneg(). v2: - add a comment regarding 1000BaseT vendor registers v3: - rebased Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: patch splitted] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: add genphy_c45_an_config_anegAndrew Lunn
C45 configuration of 10/100 and multi-giga bit auto negotiation advertisement is standardized. Configuration of 1000Base-T however appears to be vendor specific. Move the generic code out of the Marvell driver into the common phy-c45.c file. v2: - change function name to genphy_c45_an_config_aneg Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: use new helper linkmode_adv_to_mii_10gbt_adv_t and split patch] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: add helper linkmode_adv_to_mii_10gbt_adv_tHeiner Kallweit
Add a helper linkmode_adv_to_mii_10gbt_adv_t(), similar to linkmode_adv_to_mii_adv_t. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-02-16 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong. 2) test all bpf progs in alu32 mode, from Jiong. 3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin. 4) support for IP encap in lwt bpf progs, from Peter. 5) remove XDP_QUERY_XSK_UMEM dead code, from Jan. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-16tools/libbpf: support bigger BTF data sizesAndrii Nakryiko
While it's understandable why kernel limits number of BTF types to 65535 and size of string section to 64KB, in libbpf as user-space library it's too restrictive. E.g., pahole converting DWARF to BTF type information for Linux kernel generates more than 3 million BTF types and more than 3MB of strings, before deduplication. So to allow btf__dedup() to do its work, we need to be able to load bigger BTF sections using btf__new(). Singed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 12:05:17 +0000