summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-05i2c: at91: Send bus clear command if SDA is downCodrin Ciubotariu
After a transfer timeout, some faulty I2C slave devices might hold down the SDA pin. We can generate a bus clear command, hoping that the slave might release the pins. If the CLEAR command is not supported, we will use gpio recovery, if available, to reset the bus. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: fix i2c_pxa_wait_bus_not_busy() boundary conditionRussell King
Fix i2c_pxa_wait_bus_not_busy()'s boundary conditions, so that a coincidental success and timeout results in the function returning success. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: clean up decode_bits()Russell King
Clean up decode_bits() to use pr_cont(), and move the newline into the function rather than at its two callsites. Avoid printing an unnecessary space before the newline. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: fix i2c_pxa_scream_blue_murder() debug outputRussell King
The IRQ log output is supposed to appear on a single line. However, commit 3a2dc1677b60 ("i2c: pxa: Update debug function to dump more info on error") resulted in it being printed one-entry-per-line, which is excessively long. Fixing this is not a trivial matter; using pr_cont() doesn't work as the previous dev_dbg() may not have been compiled in, or may be dynamic. Since the rest of this function output is at error level, and is also debug output, promote this to error level as well to avoid this problem. Reduce the number of always zero prefix digits to save screen real- estate. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: move DT IDs along side platform IDsRussell King
Move the ID tables into one place, near the device dependent data. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: move private definitions to i2c-pxa.cRussell King
Move driver-private definitions out of the i2c-pxa.h platform data header file into the driver itself. Nothing outside of the driver makes use of these constants. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: always set fm and hs members for each typeRussell King
Always set the fm and hs members of struct pxa_reg_layout. These members are already taking space, we don't need code as well. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: add and use definitions for IBMR registerRussell King
Add definitions for the bits in the IBMR register, and use them in the code. This improves readability. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: re-arrange register field definitionsRussell King
Arrange the register field definitions to be grouped together, rather than the Armada-3700 definitions being separated from the rest of the definitions. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: re-arrange functions to flow betterRussell King
Re-arrange the PXA I2C code to avoid forward declarations, and keep similar functionality (e.g. the non-IRQ mode support) together. This improves code readability. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: re-arrange includes to be in alphabetical orderRussell King
Arrange the includes to be in alphabetical order to help avoid duplicated includes. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: remove unneeded includesRussell King
i2c-pxa does not need linux/sched.h nor linux/time.h includes, so remove these. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: pxa: use official address byte helperRussell King
i2c-pxa was created before i2c_8bit_addr_from_msg() was implemented, and used its own i2c_pxa_addr_byte() which is functionally the same. Sadly, it was never updated to use this new helper. Switch it over. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-04-30i2c: powermac: use true,false for bool variableJason Yan
In i2c_powermac_register_devices(), variable 'found_onyx' is bool and assigned '0' and 'true' in different places. Use 'false' instead of '0'. Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-30i2c: stm32f7: prevent array underflow in stm32f7_get_lower_rate()Dan Carpenter
We want to break with "i" set to zero whether we find the rate we want or not. In the current code, if we don't find the rate we want then it exits the loop with "i" set to -1 and results in an array underflow. Fixes: 09cc9a3bce91 ("i2c: stm32f7: allows for any bus frequency") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26platform/mellanox: mlxreg-hotplug: convert to use i2c_new_client_device()Wolfram Sang
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: iproc: add support for SMBUS quick cmdRayagonda Kokatanur
Add support for SMBUS quick command. SMBUS quick command passes single bit of information to the slave (target) device. Can be used to turn slave device on or off. By default i2c_detect tool uses the smbus quick cmd to try and detect devices. Without this support it will not detect some slaves. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: powermac: Simplify reading the "reg" and "i2c-address" propertyAishwarya R
Use of_property_read_u32 to read the "reg" and "i2c-address" property instead of using of_get_property to check the return values. Signed-off-by: Aishwarya R <aishwaryarj100@gmail.com> Tested-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: qup: remove unneeded conversion to boolJason Yan
The '>' expression itself is bool, no need to convert it to bool again. Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: brcmstb: Fix handling of optional interruptDave Stevenson
If there is no interrupt defined then an error is logged due to the use of platform_get_irq. The driver handles not having the interrupt by falling back to polling, therefore make the appropriate call when claiming it. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: regroup documentation of bindingsWolfram Sang
Some bindings are for the bus master, some are for the slaves. Regroup them and give them separate headings to make it clear. Also, remove references to "generic names" which is for nodes and not for compatibles. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: stm32f7: allows for any bus frequencyAlain Volmat
Do not limitate to the 3 (100KHz, 400KHz, 1MHz) bus frequency but instead allows any frequency (if it matches timing requirements). Depending on the requested frequency, use the spec data from either Standard, Fast or Fast Plus mode. Hardcoding of min/max bus frequencies is removed and is instead computed. The driver do not use anymore speed identifier but instead handle directly the frequency and figure out the spec data (necessary for the computation of the timing register) based on the frequency. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26dt-bindings: i2c: i2c-stm32f7: allow clock-frequency rangeAlain Volmat
For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters match, the bus clock frequency can be from 1Hz to 1MHz. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: stm32: don't print an error on probe deferralEtienne Carriere
Do not print an error trace when deferring probe for some resource. Fix as well the error message in case of tx dma_request_chan failure. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: brcmstb: Allow to compile it on BCM2835Maxime Ripard
The BCM2711, supported by ARCH_BCM2835, also has a controller by the brcmstb driver so let's allow it to be compiled on that platform. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: slave-eeprom: Make it possible to pre-load eeprom dataBjörn Ardö
If the slave eeprom has a "firmware-name" in devicetree, then pre-load the data in the eeprom with this file. Otherwise we init the eeprom with 0xFF. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Signed-off-by: Björn Ardö <bjorn.ardo@axis.com> [wsa: some cosmetic changes] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-18i2c: busses: remove duplicate dev_err()Dejin Zheng
it will print an error message by itself when platform_get_irq() goes wrong. so don't need dev_err() in here again. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-18i2c: Add Qualcomm CCI I2C driverLoic Poulain
This commit adds I2C bus support for the Camera Control Interface (CCI) I2C controller found on the Qualcomm SoC processors. This I2C controller supports two masters and they are registered to the core. CCI versions supported in the driver are msm8916, msm8996 and sdm845. This is a rework of the patch posted by Vinod: https://patchwork.kernel.org/patch/10569961/ With additional fixes + most of the comments addressed. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Tested-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [wsa: removed err msg after platform_get_irq] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-18dt-bindings: i2c: Add binding for Qualcomm CCI I2C controllerTodor Tomov
Add DT binding document for Qualcomm Camera Control Interface (CCI) I2C controller. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: cadence: Added slave supportRadu Pirea
Added support for I2C slave functionality Signed-off-by: Chirag Parekh <chirag.parekh@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Radu Pirea <radu_nicolae.pirea@upb.ro> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: designware: Calculate SCL timing parameter for High Speed ModeWan Ahmad Zainie
Custom parameters for HCNT/LCNT are not available for OF based system. Thus, we will use existing SCL timing parameter calculation functions for High Speed Mode too. The value for the parameters tSYMBOL and tLOW is taken from DesignWare DW_apb_i2c Databook v2.01a, section 3.15.4.6. The calculation should assume higher bus load since it gives slower timing parameter. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: designware: Calculate SCL timing parameter for Fast Mode PlusWan Ahmad Zainie
Custom parameters for HCNT/LCNT are not available for OF based system. Thus, we will use existing SCL timing parameter calculation functions for Fast Mode Plus. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: i2c-stm32f7: improve nack debug messageFabrice Gasnier
Add information on slave addr in the nack debug message. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: i801: Use GPIO_LOOKUP() helper macroGeert Uytterhoeven
i801_add_mux() fills in the GPIO lookup table by manually populating an array of gpiod_lookup structures. Use the existing GPIO_LOOKUP() helper macro instead, to relax a dependency on the gpiod_lookup structure's member names. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: refactor parsing of timingsWolfram Sang
When I wanted to print the chosen values to debug output, I concluded that a helper function to parse one timing would be helpful. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: piix4: Detect secondary SMBus controller on AMD AM4 chipsetsAdam Honse
The AMD X370 and other AM4 chipsets (A/B/X 3/4/5 parts) and Threadripper equivalents have a secondary SMBus controller at I/O port address 0x0B20. This bus is used by several manufacturers to control motherboard RGB lighting via embedded controllers. I have been using this bus in my OpenRGB project to control the Aura RGB on many motherboards and ASRock also uses this bus for their Polychrome RGB controller. I am not aware of any CZ-compatible platforms which do not have the second SMBus channel. All of AMD's AM4- and Threadripper- series chipsets that OpenRGB users have tested appear to have this secondary bus. I also noticed this secondary bus is present on older AMD platforms including my FM1 home server. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202587 Signed-off-by: Adam Honse <calcprogrammer1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: busses: convert to devm_platform_get_and_ioremap_resourceDejin Zheng
use devm_platform_get_and_ioremap_resource() to simplify code, which contains platform_get_resource() and devm_ioremap_resource(), it also get the resource for use by the following code. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: busses: convert to devm_platform_ioremap_resourceDejin Zheng
use devm_platform_ioremap_resource() to simplify code, it contains platform_get_resource and devm_ioremap_resource. Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Robert Richter <rrichter@marvell.com> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-12Linux 5.7-rc1Linus Torvalds
2020-04-12MAINTAINERS: sort field names for all entriesLinus Torvalds
This sorts the actual field names too, potentially causing even more chaos and confusion at merge time if you have edited the MAINTAINERS file. But the end result is a more consistent layout, and hopefully it's a one-time pain minimized by doing this just before the -rc1 release. This was entirely scripted: ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-12MAINTAINERS: sort entries by entry nameLinus Torvalds
They are all supposed to be sorted, but people who add new entries don't always know the alphabet. Plus sometimes the entry names get edited, and people don't then re-order the entry. Let's see how painful this will be for merging purposes (the MAINTAINERS file is often edited in various different trees), but Joe claims there's relatively few patches in -next that touch this, and doing it just before -rc1 is likely the best time. Fingers crossed. This was scripted with /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS but then I also ended up manually upper-casing a few entry names that stood out when looking at the end result. Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-12Merge tag 'x86-urgent-2020-04-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of three patches to fix the fallout of the newly added split lock detection feature. It addressed the case where a KVM guest triggers a split lock #AC and KVM reinjects it into the guest which is not prepared to handle it. Add proper sanity checks which prevent the unconditional injection into the guest and handles the #AC on the host side in the same way as user space detections are handled. Depending on the detection mode it either warns and disables detection for the task or kills the task if the mode is set to fatal" * tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest KVM: x86: Emulate split-lock access as a write in emulator x86/split_lock: Provide handle_guest_split_lock()
2020-04-12Merge tag 'timers-urgent-2020-04-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull time(keeping) updates from Thomas Gleixner: - Fix the time_for_children symlink in /proc/$PID/ so it properly reflects that it part of the 'time' namespace - Add the missing userns limit for the allowed number of time namespaces, which was half defined but the actual array member was not added. This went unnoticed as the array has an exessive empty member at the end but introduced a user visible regression as the output was corrupted. - Prevent further silent ucount corruption by adding a BUILD_BUG_ON() to catch half updated data. * tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ucount: Make sure ucounts in /proc/sys/user don't regress again time/namespace: Add max_time_namespaces ucount time/namespace: Fix time_for_children symlink
2020-04-12Merge tag 'sched-urgent-2020-04-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes/updates from Thomas Gleixner: - Deduplicate the average computations in the scheduler core and the fair class code. - Fix a raise between runtime distribution and assignement which can cause exceeding the quota by up to 70%. - Prevent negative results in the imbalanace calculation - Remove a stale warning in the workqueue code which can be triggered since the call site was moved out of preempt disabled code. It's a false positive. - Deduplicate the print macros for procfs - Add the ucmap values to the SCHED_DEBUG procfs output for completness * tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Add task uclamp values to SCHED_DEBUG procfs sched/debug: Factor out printing formats into common macros sched/debug: Remove redundant macro define sched/core: Remove unused rq::last_load_update_tick workqueue: Remove the warning in wq_worker_sleeping() sched/fair: Fix negative imbalance in imbalance calculation sched/fair: Fix race between runtime distribution and assignment sched/fair: Align rq->avg_idle and rq->avg_scan_cost
2020-04-12Merge tag 'perf-urgent-2020-04-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Three fixes/updates for perf: - Fix the perf event cgroup tracking which tries to track the cgroup even for disabled events. - Add Ice Lake server support for uncore events - Disable pagefaults when retrieving the physical address in the sampling code" * tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Disable page faults when getting phys address perf/x86/intel/uncore: Add Ice Lake server uncore support perf/cgroup: Correct indirection in perf_less_group_idx() perf/core: Fix event cgroup tracking
2020-04-12Merge tag 'locking-urgent-2020-04-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Three small fixes/updates for the locking core code: - Plug a task struct reference leak in the percpu rswem implementation. - Document the refcount interaction with PID_MAX_LIMIT - Improve the 'invalid wait context' data dump in lockdep so it contains all information which is required to decode the problem" * tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Improve 'invalid wait context' splat locking/refcount: Document interaction with PID_MAX_LIMIT locking/percpu-rwsem: Fix a task_struct refcount
2020-04-12Merge tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Ten cifs/smb fixes: - five RDMA (smbdirect) related fixes - add experimental support for swap over SMB3 mounts - also a fix which improves performance of signed connections" * tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: enable swap on SMB3 mounts smb3: change noisy error message to FYI smb3: smbdirect support can be configured by default cifs: smbd: Do not schedule work to send immediate packet on every receive cifs: smbd: Properly process errors on ib_post_send cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending cifs: smbd: Check send queue size before posting a send cifs: smbd: Merge code to track pending packets cifs: ignore cached share root handle closing errors
2020-04-12Merge tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfix from Trond Myklebust: "Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()" * tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS: Fix RCU lock leakage
2020-04-11Merge tag 'nios2-v5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 updates from Ley Foon Tan: - Remove nios2-dev@lists.rocketboards.org from MAINTAINERS - remove 'resetvalue' property - rename 'altr,gpio-bank-width' -> 'altr,ngpio' - enable the common clk subsystem on Nios2 * tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: MAINTAINERS: Remove nios2-dev@lists.rocketboards.org arch: nios2: remove 'resetvalue' property arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio' arch: nios2: Enable the common clk subsystem on Nios2
2020-04-11Merge tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: - fix an integer truncation in dma_direct_get_required_mask (Kishon Vijay Abraham) - fix the display of dma mapping types (Grygorii Strashko) * tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: fix displaying of dma allocation type dma-direct: fix data truncation in dma_direct_get_required_mask()
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 06:24:53 +0000