summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-24drm/amdgpu: Fix null point errorRex Zhu
need to check adev->powerplay.pp_funcs first, becasue from AI, the smu ip can be disabled by user, and the pp_handle is null in this case. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-24drm/amd/display: Fix Null point error if smu ip was disabledRex Zhu
from AI, SMU Ip is not indispensable to driver and can be disabled by user via module parameter ip_block_mask. so the pp_handle may be NULL. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-24drm/amd/powerplay: commit get_performance_level API as DAL neededEvan Quan
This can suppress the error reported on driver loading. Also these are empty APIs as Vega12/Vega20 has no performance levels. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22drm/amd/powerplay: bump the PPtable version supportedEvan Quan
As the matching VBIOS is already ready. Also drop the temporary workarounds applied before. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22drm/amd/powerplay: drop highest UCLK setting after display configuration changeEvan Quan
The UCLK is forced to highest at the start of display configuration change. Downgrade the UCLK from highest after display configuration change. Otherwise, we may see the UCLK stuck in the highest in some cases. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22drm/amd/pp: enable power limit increase in OD modeJoseph Greathouse
OverDrive mode allows users to increase the maximum SCLK and MCLK frequencies beyond the default on the GPU. However, this may not results in large performance gains if the GPU then runs into its TDP power limit. This patch adds the capability to increase the power limit of a GPU above its default maximum. This is only allowed when overdrive is enabled in the ppfeaturemask, since this is an overdrive feature. The TDPODLimit value from the VBIOS describes how how much higher the TDP should be allowed to go over its default, in percentage. v2: Moved dereference of hwmgr to after its validity check Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22powerplay: Respect units on max dcfclk watermarkDavid Francis
In a refactor, the watermark clock inputs to powerplay from DC were changed from units of 10kHz to kHz clocks. One division by 100 was not converted into a division by 1000. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22drm/amdgpu: Fix null pointer amdgpu_device_fw_loadingEmily Deng
Need to check adev->powerplay.pp_funcs. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-22drm/amd/powerplay: error out when force clock level under auto dpm mode V2Evan Quan
Forcing clock level is supported under manual dpm mode only. Error out when trying to set under manual mode. Instead of doing nothing and reporting success. V2: update for mclk/pcie clock level settings also Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-19Merge tag 'drm-intel-next-fixes-2018-10-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix GPU hang on MacBook2,1 when booting in EFI mode (Bugzilla #105637) - Fix garbled console on Y tiled BIOS framebuffer configs (Bugzilla #108264) - Fix black screen on certain eDP panels eg. Dell XPS 9350 (Bugzilla #107489 and #105338) - MST fixes that Rodrigo dropped from drm-intel-fixes and bunch of Icelake fixes - Then assorted proactive code fixes caught by CI or developers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018165725.GA2281@jlahtine-desk.ger.corp.intel.com
2018-10-18firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.Anusha Srivatsa
Add missing MODULE_FIRMWARE while loading DMC ICL. v2: Add Fixes tag. (Rodrigo) v3: Rebase by Rodrigo after commit 7fe78985cd08 ("drm/i915/csr: restructure CSR firmware definition macros") v4: Rodrigo fixing his own mess on commit mentioning on v3 comment above. Fixes: 4445930f1c4a ("firmware/dmc/icl: load v1.07 on icelake.") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004223613.19938-1-rodrigo.vivi@intel.com (cherry picked from commit 00e5d8b1eb47378924f3de3435450650f426b02a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-18drm/i915/icl: Fix signal_levelsRodrigo Vivi
Since when it was introduced we forgot to add this case so ICL was using a wrong signal_levels as reference. Fixes: fb5c8e9d4350 ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com (cherry picked from commit 61cdfb9e194d2a327eef301e8fc80b63e3e1dc7a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-18drm/i915/icl: Fix DDI/TC port clk_off bitsMahesh Kumar
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are from offset 12 & TC4 is at offset 21. Create a function to choose correct clk-off bit. v2: Add fixes tag (Lucas) Fixes: c27e917e2bda ("drm/i915/icl: add basic support for the ICL clocks") Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com (cherry picked from commit bb1c7edc6d4d5cc6917814d858d47b22d2e93cde) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-18drm/i915/icl: create function to identify combophy portMahesh Kumar
This patch creates a function/wrapper to check if port is combophy port instead of explicitly comparing ports. Changes since V1: - keep all intel_port_is_* helper together (Lucas) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004085043.10154-1-mahesh1.kumar@intel.com (cherry picked from commit 176597a12d61709727d1639836e5d68a6e7c437b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-18Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Fixes for 4.20. Highlights: - VCN DPG fixes for Picasso - Add support for the latest vega20 vbios - Scheduler timeout fix - License fixes for radeon and amdgpu - Misc other fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181017215427.2804-1-alexander.deucher@amd.com
2018-10-18Merge tag 'drm-misc-next-fixes-2018-10-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next - Add quirk to fix orientation of Acer One 10 (S1003) panel (Hans) Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181017200741.GA240649@art_vandelay
2018-10-17drm/i915/gen9+: Fix initial readout for Y tiled framebuffersImre Deak
If BIOS configured a Y tiled FB we failed to set up the backing object tiling accordingly, leading to a lack of GT fence installed and a garbled console. The problem was bisected to commit 011f22eb545a ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2") but it just revealed a pre-existing issue. Kudos to Ville who suspected a missing fence looking at the corruption on the screen. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: <ronald@innovation.ch> Cc: <stable@vger.kernel.org> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reported-by: <ronald@innovation.ch> Tested-by: <ronald@innovation.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264 Fixes: bc8d7dffacb1 ("drm/i915/skl: Provide a Skylake version of get_plane_config()") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016160011.28347-1-imre.deak@intel.com (cherry picked from commit 914a4fd8cd28016038ce749a818a836124a8d270) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Large page offsets for pread/pwriteChris Wilson
Handle integer overflow when computing the sub-page length for shmem backed pread/pwrite. Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012140228.29783-1-chris@chris-wilson.co.uk (cherry picked from commit a5e856a5348f6cd50889d125c40bbeec7328e466) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915/selftests: Disable shrinker across mmap-exhaustionChris Wilson
For mmap-exhaustion, we deliberately put the system under a large amount of pressure to ensure that we are able to reap mmap-offsets from dead objects. If background activity does that reaping for us, that defeats the purpose of the test and in some cases will fail our sanity checks (because of the fake activity we use to prevent the idle worker). Fixes: 932cac10c8fb ("drm/i915/selftests: Prevent background reaping of acti ve objects") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011103748.18387-1-chris@chris-wilson.co.uk (cherry picked from commit 0b4bf7ca9be824dde6ff63dd2ceba2d1367f8a58) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit ↵Manasi Navare
panel's native mode This patch fixes the original commit c0cfb10d9e1de49 ("drm/i915/edp: Do not do link training fallback or prune modes on EDP") that causes a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350) where first link training fails and a retraining is required by falling back to lower link rate/lane count. In case of some panels they advertise higher link rate/lane count than whats required for supporting the panel's native mode. But we always link train at highest link rate/lane count for eDP and if that fails we can still fallback to lower link rate/lane count as long as the fallback link BW still fits the native mode to avoid pruning the panel's native mode yet retraining at fallback values to recover from a blank screen. v3: * Add const for fixed_mode (Ville) v2: * Send uevent if link failure on eDP unconditionally Fixes: c0cfb10d9e1d ("drm/i915/edp: Do not do link training fallback or prune modes on EDP") Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: <stable@vger.kernel.org> # v4.17+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338 Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Tested-by: Alexander Wilson <alexander.wilson@ncf.edu> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181009212804.702-1-manasi.d.navare@intel.com (cherry picked from commit 1e712535c51ab025ebc776d4405683d81521996d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Fix intel_dp_mst_best_encoder()Lyude Paul
Currently, i915 appears to rely on blocking modesets on no-longer-present MSTB ports by simply returning NULL for ->best_encoder(), which in turn causes any new atomic commits that don't disable the CRTC to fail. This is wrong however, since we still want to allow userspace to disable CRTCs on no-longer-present MSTB ports by changing the DPMS state to off and this still requires that we retrieve an encoder. So, fix this by always returning a valid encoder regardless of the state of the MST port. Changes since v1: - Remove mst atomic helper, since this got replaced with a much simpler solution Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-6-lyude@redhat.com (cherry picked from commit a9f9ca33d1fe9325f414914be526c0fc4ba5281c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Skip vcpi allocation for MSTB ports that are goneLyude Paul
Since we need to be able to allow DPMS on->off prop changes after an MST port has disappeared from the system, we need to be able to make sure we can compute a config for the resulting atomic commit. Currently this is impossible when the port has disappeared, since the VCPI slot searching we try to do in intel_dp_mst_compute_config() will fail with -EINVAL. Since the only commits we want to allow on no-longer-present MST ports are ones that shut off display hardware, we already know that no VCPI allocations are needed. So, hardcode the VCPI slot count to 0 when intel_dp_mst_compute_config() is called on an MST port that's gone. Changes since V4: - Don't use mst_port_gone at all, just check whether or not the drm connector is registered - Daniel Vetter Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com (cherry picked from commit f67207d78ceaf98b7531bc22df6f21328559c8d4) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Don't unset intel_connector->mst_portLyude Paul
Currently we set intel_connector->mst_port to NULL to signify that the MST port has been removed from the system so that we can prevent further action on the port such as connector probes, mode probing, etc. However, we're going to need access to intel_connector->mst_port in order to fixup ->best_encoder() so that it can always return the correct encoder for an MST port to prevent legacy DPMS prop changes from failing. This should be safe, so instead keep intel_connector->mst_port always set and instead just check the status of drm_connector->regustered to signify whether or not the connector has disappeared from the system. Changes since v2: - Add a comment to mst_port_gone (Jani Nikula) - Change mst_port_gone to a u8 instead of a bool, per the kernel bot. Apparently bool is discouraged in structs these days Changes since v4: - Don't use mst_port_gone at all! Just check if the connector is registered or not - Daniel Vetter Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-4-lyude@redhat.com (cherry picked from commit 6ed5bb1fbad34382c8cfe9a9bf737e9a43053df5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Only reset seqno if actually idleChris Wilson
Before we can reset the seqno, we have to be sure the engines are idle. In debugfs/i915_drop_caches_set, we do wait_for_idle but allow ourselves to be interrupted. We should only proceed to reset the seqno then if we were not interrupted, and so also avoid overwriting the error status. References: https://bugs.freedesktop.org/show_bug.cgi?id=108133 Fixes: 6b048706f407 ("drm/i915: Forcibly flush unwanted requests in drop-caches") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004082119.24970-1-chris@chris-wilson.co.uk (cherry picked from commit 88a83f3c2d7a87ce7c9c4171dec8e2fb48070288) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Use the correct crtc when sanitizing plane mappingVille Syrjälä
When we decide that a plane is attached to the wrong pipe we try to turn off said plane. However we are passing around the crtc we think that the plane is supposed to be using rather than the crtc it is currently using. That doesn't work all that well because we may have to do vblank waits etc. and the other pipe might not even be enabled here. So let's pass the plane's current crtc to intel_plane_disable_noatomic() so that it can its job correctly. To do that semi-cleanly we also have to change the plane readout to record the plane's visibility into the bitmasks of the crtc where the plane is currently enabled rather than to the crtc we want to use for the plane. One caveat here is that our active_planes bitmask will get confused if both planes are enabled on the same pipe. Fortunately we can use plane_mask to reconstruct active_planes sufficiently since plane_mask still has the same meaning (is the plane visible?) during readout. We also have to do the same during the initial plane readout as the second plane could clear the active_planes bit the first plane had already set. v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel) Add Daniel's proposed comment to better document why we do this Drop the redundant intel_set_plane_visible() call Cc: stable@vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe Cc: stable@vger.kernel.org Cc: Dennis <dennis.nezic@utoronto.ca> Cc: Daniel Vetter <daniel@ffwll.ch> Tested-by: Dennis <dennis.nezic@utoronto.ca> Tested-by: Peter Nowee <peter.nowee@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637 Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181003145017.4527-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 62358aa4ee86481ce044bef04859820e1bc7c1d9) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Restore vblank interrupts earlierVille Syrjälä
Plane sanitation needs vblank interrupts (on account of CxSR disable). So let's restore vblank interrupts earlier. v2: Make it actually build v3: Add comment to explain why we need this (Daniel) Cc: stable@vger.kernel.org Cc: Dennis <dennis.nezic@utoronto.ca> Tested-by: Dennis <dennis.nezic@utoronto.ca> Tested-by: Peter Nowee <peter.nowee@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637 Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181003144951.4397-1-ville.syrjala@linux.intel.com (cherry picked from commit 68bc30deac625b8be8d3950b30dc93d09a3645f5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Check fb stride against plane max strideVille Syrjälä
commit 4e0b83a567e2 ("drm/i915: Extract per-platform plane->check() functions") removed the plane max stride check for sprite planes. I was going to add it back when introducing GTT remapping for the display, but after further thought it seems better to re-introduce it separately. So let's add the max stride check back. And let's do it in a nicer form than what we had before and do it for all plane types (easy now that we have the ->max_stride() plane vfunc). Only sprite planes really need this for now since primary planes are capable of scanning out the current max fb size we allow, and cursors have more stringent stride checks elsewhere. Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: 4e0b83a567e2 ("drm/i915: Extract per-platform plane->check() functions") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180918140243.12207-1-ville.syrjala@linux.intel.com Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> (cherry picked from commit fc3fed5d297b51f9e2c7d4f969c95c0d6e50ca57) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/amdgpu/vcn:Fix uninitialized symbol errorJames Zhu
ret_code should be initialized with 0. The check of read/write ptr should be activate when UVD_POWER_STATUS_TILES is off. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-17drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)Hans de Goede
The Acer One 10 uses a clamshell design with a detachable keyboard. As such in normal operating mode, with the keyboard attach the device is in landscape mode (and the Acer logo at boot also shows in landscape mode). But the device uses a portrait screen rotated 90 degrees (sigh). This commit adds a quirk for this device so that we shown the fbcon the right way up and that we hint userspace to also show e.g. plymouth and gdm the right way up. Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012101610.29100-1-hdegoede@redhat.com
2018-10-16drm/amd/amdgpu: Fix debugfs error handlingDan Carpenter
The error handling is wrong and "ent" could be NULL we when dereference it to get "ent->d_inode". The thing is that normally debugfs_create_file() is not supposed to require (or have) any error handling. That function does return error pointers if debugfs is turned off but we know it's enable here. When it's enabled, then it returns NULL on error. So what I did was I stripped out all the error handling except around the i_size_write(). I could have just used a NULL check instead of an IS_ERR_OR_NULL() but I figured this was more clear because that way you don't have to look at the surrounding code to see whether debugfs is enabled or not. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-16drm/amdgpu: Update gc_9_0 golden settings.Feifei Xu
Add mmDB_DEBUG3 settings. Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-10-16drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fieldsEvan Quan
Update the PPtable structure to fit the latest SMC firmware. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-16drm/amd/powerplay: added I2C controller configurationEvan Quan
PPTABLE structure is stretched to add I2C controller configuration. Hold on the PPTABLE_V20_SMU_VERSION bump until the VBIOS is ready. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-16drm/amdgpu: update Vega20 SDMA golden settingEvan Quan
Update SDMA golden settings. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-16drm/amdgpu: Fix typo in amdgpu_vmid_mgr_initRex Zhu
fix a typo in for loop: i->j Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-10-15drm/amd/display: fix bug of accessing invalid memorySu Sung Chung
[Why] A loop inside of build_evenly_distributed_points function that traverse through the array of points become an infinite loop when m_GammaUpdates does not get assigned to any value. [How] In DMColor, clear m_gammaIsValid bit just before writting all Zeromem for m_GammaUpdates, to prevent calling build_evenly_distributed_points before m_GammaUpdates gets assigned to some value. Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-15drm/radeon: change SPDX identifier to MITJonathan Gray
Commit b24413180f5600bcb3bb70fbed5cf186b60864bd added "SPDX-License-Identifier: GPL-2.0" to files which previously had no license, change this to MIT for radeon matching the license text of the other radeon files. Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-15drm/amdgpu: correct SPDX identifier in amdgpu_trace_points.cJonathan Gray
Commit b24413180f5600bcb3bb70fbed5cf186b60864bd 'License cleanup: add SPDX GPL-2.0 license identifier to files with no license' incorrectly added "SPDX-License-Identifier: GPL-2.0" to a file with MIT license text. Change the SPDX identifier to match the license text. Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Update SPG mode UVD status clearJames Zhu
Update Static Power Gate mode UVD status clear Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Set VCPU busy after gate power during vcn SPG startJames Zhu
Set VCPU busy after gate power during vcn Static Power Gate start Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Apply new UMC enable for VNC DPG modeJames Zhu
Apply new UMC enable for VNC Dynamic Power Gate mode Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Remove SPG mode unused steps during vcn startJames Zhu
Remove Sitatic Power Gate mode unused steps during vcn start Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Add SPG mode Register XX checkJames Zhu
Add Static Power Gate mode Register XX check Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Move SPG mode mc resume after MPC controlJames Zhu
Move Static Power Gate mode mc resume after MPC control Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Update SPG mode VCN global tilingJames Zhu
Update Static Power Gate mode VCN global tiling Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Update SPG mode VCN memory controlJames Zhu
Update Static Power Gate mode VCN memory control Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Apply new UMC enable for VNC DPG mode startJames Zhu
Apply new UMC enable for VNC Dynamic Power Gate mode start Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Remove DPG mode unused steps during vcn startJames Zhu
Remove Dynamic Power Gate mode unused steps during VCN start Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Add DPG mode Register XX checkJames Zhu
Add Dynamic Power Gate mode Register XX check Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-12drm/amdgpu/vcn:Update DPG mode VCN global tiling registersJames Zhu
Update Dynamic Power Gate mode VCN global tiling registers Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 19:57:21 +0000