summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-26ALSA: emu10k1: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: emu10k1x: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: echoaudio: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: cs46xx: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: cs5535audio: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: ca0106: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. A couple of prints are difficult to convert with dev_err() so they are converted to pr_err() at least. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: aw2: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. A couple of prints are difficult to convert with dev_err() so they are converted to pr_err() at least. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: ali5451: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Some debug prints are replaced with dev_dbg(), too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: ac97: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: via82xx_modem: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: via82xx: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: sonicvibes: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. The debug prints are also reformatted to suit with dev_dbg(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: rme96: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: rme32: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: maestro3: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: intel8x0m: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: intel8x0: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: fm801: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: es1968: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: es1938: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Some debug prints are replaced with dev_dbg(), too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: ens137x: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: cs5530: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: cs4281: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: cmipci: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Some commented debug prints are also enabled as dev_dbg(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: bt87x: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: azt3328: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. All debug print macros have been replaced with dev_dbg(), too. Also, added the missing definition of snd_azf3328_ctrl_inw(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: azt3328: Remove function debug printsTakashi Iwai
We have a better infrastructure in general, so let's reduce the home-baked debug macros. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: atiixp-modem: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: atiixp: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: als4000: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: als300: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Also, correct the printk level appropriately. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: als300: Remove function debug printsTakashi Iwai
We have a better infrastructure in general, so let's reduce the home-baked debug macros. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: ad1889: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: rme96: Convert to the new pm_opsTakashi Iwai
This driver slipped from the last rewrite. Just convert to the new standard pm ops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25ALSA: hda - Avoid codec D3 for keeping mute LED up on Lenovo Yxx0Takashi Iwai
The GPIO line used for the mute LED control on Lenovo Yxx0 laptops is cleared unexpectedly when the codec goes to D3, typically by power-saving. For avoiding it, add a power filter in the fixup. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-21ALSA: rawmidi: remove undefined functions.Takashi Sakamoto
'snd_rawmidi_transmit_reset()' and 'snd_rawmidi_receive_reset()' are declared but not defined. This state has been continue over 10 years. So let us remove them. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-19ALSA: core: Fix missing card sysfs contentsTakashi Iwai
While moving the card device into struct snd_card, the reference to the assigned card in sysfs show/store callbacks were forgotten to be refreshed, still accessing to the no longer used drvdata. Fix these places to refer correctly via container_of(). Also, remove the superfluous NULL checks since it's guaranteed to be non-NULL now. Fixes: 8bfb181c17d2 ('ALSA: Embed card device into struct snd_card') Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-19ALSA: hda - Add QEMU codec vendor IDTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-17ALSA: usx2y: Don't peep the card internal objectTakashi Iwai
Avoid traversing the device object list of the card instance just for checking the PCM streams. The driver's private object already contains the array of substream pointers, so it can be simply looked through. The card internal may be restructured in future, thus better not to rely on it. Also, this fixes the possible deadlocks in PCM mutex. Instead of taking multiple PCM mutexes, just take the common mutex in all places. Along with it, rename prepare_mutex as pcm_mutex. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-15ALSA: hda - Remove superfluous inclusion of linux/pci.hTakashi Iwai
Some codec drivers still have it since using PCI_VENDOR_ID_*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-15ALSA: hda/realtek - Allow NULL bus->pciTakashi Iwai
Realtek codec driver contains some codes referring to the PCI subdevice IDs, but most of them are optional, typically for checking the codec name variants. Add NULL checks appropriately so that it can work without PCI assignment. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-15ALSA: hda - Remove dependency on bus->pci in hda_beep.cTakashi Iwai
The default parent device can be obtained directly via card object, so we don't need to rely on pci->dev.parent. Since there is no access to pci_dev, we can reduce the inclusion of linux/pci.h, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: ak4117: Do not free priv until timer handler hasn't actually stopped ↵Kirill Tkhai
using it Function del_timer() does not guarantee that timer was really deleted. If the timer handler is beeing executed at the moment, the function does nothing. So, it's possible to use already freed memory in the handler: [ref: Documentation/DocBook/kernel-locking.tmpl] This was found using grep and compile-tested only. Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: Drop __bitwise and typedefs for snd_device attributesTakashi Iwai
Using __bitwise and typedefs for the attributes of snd_device struct isn't so useful, and rather it worsens the readability. Let's drop them and use the straightforward enum. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: i2c/ak413x: Use SNDRV_DEV_CODEC for ak413x codec objectsTakashi Iwai
... instead of SNDRV_DEV_LOWLEVEL. No functional change at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: aoa: Use SNDRV_DEV_CODEC for AOA codec objectsTakashi Iwai
... instead of SNDRV_DEV_LOWLEVEL. No functional change at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: usb-audio: Use SNDRV_DEV_CODEC for mixer objectsTakashi Iwai
Instead of SNDRV_DEV_LOWLEVEL, use SNDRV_DEV_CODEC type for mixer objects so that they are managed in a proper release order. No functional change at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: seq_oss: Use standard printk helpersTakashi Iwai
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: seq: Use standard printk helpersTakashi Iwai
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14ALSA: timer: Use standard printk helpersTakashi Iwai
Use the standard pr_xxx() helpers instead of home-baked snd_print*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 03:24:48 +0000