summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-04nfsd: remove redundant zero-length check from createJ. Bruce Fields
lookup_one_len already has this check. The only effect of this patch is to return access instead of perm in the 0-length-filename case. I actually prefer nfserr_perm (or _inval?), but I doubt anyone cares. The isdotent check seems redundant too, but I worry that some client might actually care about that strange nfserr_exist error. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-08-04nfsd: Make creates return EEXIST instead of EACCESOleg Drokin
When doing a create (mkdir/mknod) on a name, it's worth checking the name exists first before returning EACCES in case the directory is not writeable by the user. This makes return values on the client more consistent regardless of whenever the entry there is cached in the local cache or not. Another positive side effect is certain programs only expect EEXIST in that case even despite POSIX allowing any valid error to be returned. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-08-04mm/block: convert rw_page users to bio op useMike Christie
The rw_page users were not converted to use bio/req ops. As a result bdev_write_page is not passing down REQ_OP_WRITE and the IOs will be sent down as reads. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixes: 4e1b2d52a80d ("block, fs, drivers: remove REQ_OP compat defs and related code") Modified by me to: 1) Drop op_flags passing into ->rw_page(), as we don't use it. 2) Make op_is_write() and friends safe to use for !CONFIG_BLOCK Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04loop: make do_req_filebacked more robustChristoph Hellwig
Use a switch statement to iterate over the possible operations and error out if it's an incorrect one. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04loop: don't try to use AIO for discardsChristoph Hellwig
Fix a fat-fingered conversion to the req_op accessors, and also use a switch statement to make it more obvious what is being checked. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Dave Chinner <david@fromorbit.com> Fixes: c2df40 ("drivers: use req op accessor"); Reviewed-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04blk-mq: fix deadlock in blk_mq_register_disk() error pathJens Axboe
If we fail registering any of the hardware queues, we call into blk_mq_unregister_disk() with the hotplug mutex already held. Since blk_mq_unregister_disk() attempts to acquire the same mutex, we end up in a less than happy place. Reported-by: Jinpu Wang <jinpu.wang@profitbricks.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04Include: blkdev: Removed duplicate 'struct request;' declaration.John Pittman
In include/linux/blkdev.h duplicate declarations of the request struct exist. Cleaned up by removing the second, unneeded declaration. Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04Fixup direct bi_rw modifiersShaun Tancheff
bi_rw should be using bio_set_op_attrs to set bi_rw. Signed-off-by: Shaun Tancheff <shaun@tancheff.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: David Sterba <dsterba@suse.com> Cc: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04block: fix bdi vs gendisk lifetime mismatchDan Williams
The name for a bdi of a gendisk is derived from the gendisk's devt. However, since the gendisk is destroyed before the bdi it leaves a window where a new gendisk could dynamically reuse the same devt while a bdi with the same name is still live. Arrange for the bdi to hold a reference against its "owner" disk device while it is registered. Otherwise we can hit sysfs duplicate name collisions like the following: WARNING: CPU: 10 PID: 2078 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80 sysfs: cannot create duplicate filename '/devices/virtual/bdi/259:1' Hardware name: HP ProLiant DL580 Gen8, BIOS P79 05/06/2015 0000000000000286 0000000002c04ad5 ffff88006f24f970 ffffffff8134caec ffff88006f24f9c0 0000000000000000 ffff88006f24f9b0 ffffffff8108c351 0000001f0000000c ffff88105d236000 ffff88105d1031e0 ffff8800357427f8 Call Trace: [<ffffffff8134caec>] dump_stack+0x63/0x87 [<ffffffff8108c351>] __warn+0xd1/0xf0 [<ffffffff8108c3cf>] warn_slowpath_fmt+0x5f/0x80 [<ffffffff812a0d34>] sysfs_warn_dup+0x64/0x80 [<ffffffff812a0e1e>] sysfs_create_dir_ns+0x7e/0x90 [<ffffffff8134faaa>] kobject_add_internal+0xaa/0x320 [<ffffffff81358d4e>] ? vsnprintf+0x34e/0x4d0 [<ffffffff8134ff55>] kobject_add+0x75/0xd0 [<ffffffff816e66b2>] ? mutex_lock+0x12/0x2f [<ffffffff8148b0a5>] device_add+0x125/0x610 [<ffffffff8148b788>] device_create_groups_vargs+0xd8/0x100 [<ffffffff8148b7cc>] device_create_vargs+0x1c/0x20 [<ffffffff811b775c>] bdi_register+0x8c/0x180 [<ffffffff811b7877>] bdi_register_dev+0x27/0x30 [<ffffffff813317f5>] add_disk+0x175/0x4a0 Cc: <stable@vger.kernel.org> Reported-by: Yi Zhang <yizhan@redhat.com> Tested-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Fixed up missing 0 return in bdi_register_owner(). Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04blk-mq: Allow timeouts to run while queue is freezingGabriel Krisman Bertazi
In case a submitted request gets stuck for some reason, the block layer can prevent the request starvation by starting the scheduled timeout work. If this stuck request occurs at the same time another thread has started a queue freeze, the blk_mq_timeout_work will not be able to acquire the queue reference and will return silently, thus not issuing the timeout. But since the request is already holding a q_usage_counter reference and is unable to complete, it will never release its reference, preventing the queue from completing the freeze started by first thread. This puts the request_queue in a hung state, forever waiting for the freeze completion. This was observed while running IO to a NVMe device at the same time we toggled the CPU hotplug code. Eventually, once a request got stuck requiring a timeout during a queue freeze, we saw the CPU Hotplug notification code get stuck inside blk_mq_freeze_queue_wait, as shown in the trace below. [c000000deaf13690] [c000000deaf13738] 0xc000000deaf13738 (unreliable) [c000000deaf13860] [c000000000015ce8] __switch_to+0x1f8/0x350 [c000000deaf138b0] [c000000000ade0e4] __schedule+0x314/0x990 [c000000deaf13940] [c000000000ade7a8] schedule+0x48/0xc0 [c000000deaf13970] [c0000000005492a4] blk_mq_freeze_queue_wait+0x74/0x110 [c000000deaf139e0] [c00000000054b6a8] blk_mq_queue_reinit_notify+0x1a8/0x2e0 [c000000deaf13a40] [c0000000000e7878] notifier_call_chain+0x98/0x100 [c000000deaf13a90] [c0000000000b8e08] cpu_notify_nofail+0x48/0xa0 [c000000deaf13ac0] [c0000000000b92f0] _cpu_down+0x2a0/0x400 [c000000deaf13b90] [c0000000000b94a8] cpu_down+0x58/0xa0 [c000000deaf13bc0] [c0000000006d5dcc] cpu_subsys_offline+0x2c/0x50 [c000000deaf13bf0] [c0000000006cd244] device_offline+0x104/0x140 [c000000deaf13c30] [c0000000006cd40c] online_store+0x6c/0xc0 [c000000deaf13c80] [c0000000006c8c78] dev_attr_store+0x68/0xa0 [c000000deaf13cc0] [c0000000003974d0] sysfs_kf_write+0x80/0xb0 [c000000deaf13d00] [c0000000003963e8] kernfs_fop_write+0x188/0x200 [c000000deaf13d50] [c0000000002e0f6c] __vfs_write+0x6c/0xe0 [c000000deaf13d90] [c0000000002e1ca0] vfs_write+0xc0/0x230 [c000000deaf13de0] [c0000000002e2cdc] SyS_write+0x6c/0x110 [c000000deaf13e30] [c000000000009204] system_call+0x38/0xb4 The fix is to allow the timeout work to execute in the window between dropping the initial refcount reference and the release of the last reference, which actually marks the freeze completion. This can be achieved with percpu_refcount_tryget, which does not require the counter to be alive. This way the timeout work can do it's job and terminate a stuck request even during a freeze, returning its reference and avoiding the deadlock. Allowing the timeout to run is just a part of the fix, since for some devices, we might get stuck again inside the device driver's timeout handler, should it attempt to allocate a new request in that path - which is a quite common action for Abort commands, which need to be sent after a timeout. In NVMe, for instance, we call blk_mq_alloc_request from inside the timeout handler, which will fail during a freeze, since it also tries to acquire a queue reference. I considered a similar change to blk_mq_alloc_request as a generic solution for further device driver hangs, but we can't do that, since it would allow new requests to disturb the freeze process. I thought about creating a new function in the block layer to support unfreezable requests for these occasions, but after working on it for a while, I feel like this should be handled in a per-driver basis. I'm now experimenting with changes to the NVMe timeout path, but I'm open to suggestions of ways to make this generic. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Cc: linux-nvme@lists.infradead.org Cc: linux-block@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04nbd: fix race in ioctlVegard Nossum
Quentin ran into this bug: WARNING: CPU: 64 PID: 10085 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x65/0x80 sysfs: cannot create duplicate filename '/devices/virtual/block/nbd3/pid' Modules linked in: nbd CPU: 64 PID: 10085 Comm: qemu-nbd Tainted: G D 4.6.0+ #7 0000000000000000 ffff8820330bba68 ffffffff814b8791 ffff8820330bbac8 0000000000000000 ffff8820330bbab8 ffffffff810d04ab ffff8820330bbaa8 0000001f00000296 0000000000017681 ffff8810380bf000 ffffffffa0001790 Call Trace: [<ffffffff814b8791>] dump_stack+0x4d/0x6c [<ffffffff810d04ab>] __warn+0xdb/0x100 [<ffffffff810d0574>] warn_slowpath_fmt+0x44/0x50 [<ffffffff81218c65>] sysfs_warn_dup+0x65/0x80 [<ffffffff81218a02>] sysfs_add_file_mode_ns+0x172/0x180 [<ffffffff81218a35>] sysfs_create_file_ns+0x25/0x30 [<ffffffff81594a76>] device_create_file+0x36/0x90 [<ffffffffa0000e8d>] __nbd_ioctl+0x32d/0x9b0 [nbd] [<ffffffff814cc8e8>] ? find_next_bit+0x18/0x20 [<ffffffff810f7c29>] ? select_idle_sibling+0xe9/0x120 [<ffffffff810f6cd7>] ? __enqueue_entity+0x67/0x70 [<ffffffff810f9bf0>] ? enqueue_task_fair+0x630/0xe20 [<ffffffff810efa76>] ? resched_curr+0x36/0x70 [<ffffffff810f0078>] ? check_preempt_curr+0x78/0x90 [<ffffffff810f00a2>] ? ttwu_do_wakeup+0x12/0x80 [<ffffffff810f01b1>] ? ttwu_do_activate.constprop.86+0x61/0x70 [<ffffffff810f0c15>] ? try_to_wake_up+0x185/0x2d0 [<ffffffff810f0d6d>] ? default_wake_function+0xd/0x10 [<ffffffff81105471>] ? autoremove_wake_function+0x11/0x40 [<ffffffffa0001577>] nbd_ioctl+0x67/0x94 [nbd] [<ffffffff814ac0fd>] blkdev_ioctl+0x14d/0x940 [<ffffffff811b0da2>] ? put_pipe_info+0x22/0x60 [<ffffffff811d96cc>] block_ioctl+0x3c/0x40 [<ffffffff811ba08d>] do_vfs_ioctl+0x8d/0x5e0 [<ffffffff811aa329>] ? ____fput+0x9/0x10 [<ffffffff810e9092>] ? task_work_run+0x72/0x90 [<ffffffff811ba627>] SyS_ioctl+0x47/0x80 [<ffffffff8185f5df>] entry_SYSCALL_64_fastpath+0x17/0x93 ---[ end trace 7899b295e4f850c8 ]--- It seems fairly obvious that device_create_file() is not being protected from being run concurrently on the same nbd. Quentin found the following relevant commits: 1a2ad21 nbd: add locking to nbd_ioctl 90b8f28 [PATCH] end of methods switch: remove the old ones d4430d6 [PATCH] beginning of methods conversion 08f8585 [PATCH] move block_device_operations to blkdev.h It would seem that the race was introduced in the process of moving nbd from BKL to unlocked ioctls. By setting nbd->task_recv while the mutex is held, we can prevent other processes from running concurrently (since nbd->task_recv is also checked while the mutex is held). Reported-and-tested-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Pavel Machek <pavel@suse.cz> Cc: Jens Axboe <axboe@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04block: fix use-after-free in seq fileVegard Nossum
I got a KASAN report of use-after-free: ================================================================== BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508 Read of size 8 by task trinity-c1/315 ============================================================================= BUG kmalloc-32 (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315 ___slab_alloc+0x4f1/0x520 __slab_alloc.isra.58+0x56/0x80 kmem_cache_alloc_trace+0x260/0x2a0 disk_seqf_start+0x66/0x110 traverse+0x176/0x860 seq_read+0x7e3/0x11a0 proc_reg_read+0xbc/0x180 do_loop_readv_writev+0x134/0x210 do_readv_writev+0x565/0x660 vfs_readv+0x67/0xa0 do_preadv+0x126/0x170 SyS_preadv+0xc/0x10 do_syscall_64+0x1a1/0x460 return_from_SYSCALL_64+0x0/0x6a INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315 __slab_free+0x17a/0x2c0 kfree+0x20a/0x220 disk_seqf_stop+0x42/0x50 traverse+0x3b5/0x860 seq_read+0x7e3/0x11a0 proc_reg_read+0xbc/0x180 do_loop_readv_writev+0x134/0x210 do_readv_writev+0x565/0x660 vfs_readv+0x67/0xa0 do_preadv+0x126/0x170 SyS_preadv+0xc/0x10 do_syscall_64+0x1a1/0x460 return_from_SYSCALL_64+0x0/0x6a CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G B 4.7.0+ #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480 ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480 ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970 Call Trace: [<ffffffff81d6ce81>] dump_stack+0x65/0x84 [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0 [<ffffffff814704ff>] object_err+0x2f/0x40 [<ffffffff814754d1>] kasan_report_error+0x221/0x520 [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40 [<ffffffff83888161>] klist_iter_exit+0x61/0x70 [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10 [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50 [<ffffffff8151f812>] seq_read+0x4b2/0x11a0 [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180 [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210 [<ffffffff814b4c45>] do_readv_writev+0x565/0x660 [<ffffffff814b8a17>] vfs_readv+0x67/0xa0 [<ffffffff814b8de6>] do_preadv+0x126/0x170 [<ffffffff814b92ec>] SyS_preadv+0xc/0x10 This problem can occur in the following situation: open() - pread() - .seq_start() - iter = kmalloc() // succeeds - seqf->private = iter - .seq_stop() - kfree(seqf->private) - pread() - .seq_start() - iter = kmalloc() // fails - .seq_stop() - class_dev_iter_exit(seqf->private) // boom! old pointer As the comment in disk_seqf_stop() says, stop is called even if start failed, so we need to reinitialise the private pointer to NULL when seq iteration stops. An alternative would be to set the private pointer to NULL when the kmalloc() in disk_seqf_start() fails. Cc: stable@vger.kernel.org Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04f2fs: drop bio->bi_rw manual assignmentJens Axboe
Merge 4fc29c1aa375 included this extra line, but it's not needed (or useful) since we'll bio_set_op_attrs() right after to properly set the op and flags for the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04block: add missing group association in bio-cloning functionsPaolo Valente
When a bio is cloned, the newly created bio must be associated with the same blkcg as the original bio (if BLK_CGROUP is enabled). If this operation is not performed, then the new bio is not associated with any group, and the group of the current task is returned when the group of the bio is requested. Depending on the cloning frequency, this may cause a large percentage of the bios belonging to a given group to be treated as if belonging to other groups (in most cases as if belonging to the root group). The expected group isolation may thereby be broken. This commit adds the missing association in bio-cloning functions. Fixes: da2f0f74cf7d ("Btrfs: add support for blkio controllers") Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Reviewed-by: Nikolay Borisov <kernel@kyup.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04blkcg: kill unused field nr_undestroyed_grpsHou Tao
'nr_undestroyed_grps' in struct throtl_data was used to count the number of throtl_grp related with throtl_data, but now throtl_grp is tracked by blkcg_gq, so it is useless anymore. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04writeback: Write dirty times for WB_SYNC_ALL writebackJan Kara
Currently we take care to handle I_DIRTY_TIME in vfs_fsync() and queue_io() so that inodes which have only dirty timestamps are properly written on fsync(2) and sync(2). However there are other call sites - most notably going through write_inode_now() - which expect inode to be clean after WB_SYNC_ALL writeback. This is not currently true as we do not clear I_DIRTY_TIME in __writeback_single_inode() even for WB_SYNC_ALL writeback in all the cases. This then resulted in the following oops because bdev_write_inode() did not clean the inode and writeback code later stumbled over a dirty inode with detached wb. general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 3 PID: 32 Comm: kworker/u10:1 Not tainted 4.6.0-rc3+ #349 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-11:0) task: ffff88006ccf1840 ti: ffff88006cda8000 task.ti: ffff88006cda8000 RIP: 0010:[<ffffffff818884d2>] [<ffffffff818884d2>] locked_inode_to_wb_and_lock_list+0xa2/0x750 RSP: 0018:ffff88006cdaf7d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88006ccf2050 RDX: 0000000000000000 RSI: 000000114c8a8484 RDI: 0000000000000286 RBP: ffff88006cdaf820 R08: ffff88006ccf1840 R09: 0000000000000000 R10: 000229915090805f R11: 0000000000000001 R12: ffff88006a72f5e0 R13: dffffc0000000000 R14: ffffed000d4e5eed R15: ffffffff8830cf40 FS: 0000000000000000(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000003301bf8 CR3: 000000006368f000 CR4: 00000000000006e0 DR0: 0000000000001ec9 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Stack: ffff88006a72f680 ffff88006a72f768 ffff8800671230d8 03ff88006cdaf948 ffff88006a72f668 ffff88006a72f5e0 ffff8800671230d8 ffff88006cdaf948 ffff880065b90cc8 ffff880067123100 ffff88006cdaf970 ffffffff8188e12e Call Trace: [< inline >] inode_to_wb_and_lock_list fs/fs-writeback.c:309 [<ffffffff8188e12e>] writeback_sb_inodes+0x4de/0x1250 fs/fs-writeback.c:1554 [<ffffffff8188efa4>] __writeback_inodes_wb+0x104/0x1e0 fs/fs-writeback.c:1600 [<ffffffff8188f9ae>] wb_writeback+0x7ce/0xc90 fs/fs-writeback.c:1709 [< inline >] wb_do_writeback fs/fs-writeback.c:1844 [<ffffffff81891079>] wb_workfn+0x2f9/0x1000 fs/fs-writeback.c:1884 [<ffffffff813bcd1e>] process_one_work+0x78e/0x15c0 kernel/workqueue.c:2094 [<ffffffff813bdc2b>] worker_thread+0xdb/0xfc0 kernel/workqueue.c:2228 [<ffffffff813cdeef>] kthread+0x23f/0x2d0 drivers/block/aoe/aoecmd.c:1303 [<ffffffff867bc5d2>] ret_from_fork+0x22/0x50 arch/x86/entry/entry_64.S:392 Code: 05 94 4a a8 06 85 c0 0f 85 03 03 00 00 e8 07 15 d0 ff 41 80 3e 00 0f 85 64 06 00 00 49 8b 9c 24 88 01 00 00 48 89 d8 48 c1 e8 03 <42> 80 3c 28 00 0f 85 17 06 00 00 48 8b 03 48 83 c0 50 48 39 c3 RIP [< inline >] wb_get include/linux/backing-dev-defs.h:212 RIP [<ffffffff818884d2>] locked_inode_to_wb_and_lock_list+0xa2/0x750 fs/fs-writeback.c:281 RSP <ffff88006cdaf7d0> ---[ end trace 986a4d314dcb2694 ]--- Fix the problem by making sure __writeback_single_inode() writes inode only with dirty times in WB_SYNC_ALL mode. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04floppy: fix open(O_ACCMODE) for ioctl-only openJiri Kosina
Commit 09954bad4 ("floppy: refactor open() flags handling"), as a side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that this is being used setfdprm userspace for ioctl-only open(). Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE) modes, while still keeping the original O_NDELAY bug fixed. Cc: stable@vger.kernel.org # v4.5+ Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Tested-by: Wim Osterholt <wim@djo.tudelft.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-04metag: Fix __cmpxchg_u32 asm constraint for CMPJames Hogan
The LNKGET based atomic sequence in __cmpxchg_u32 has slightly incorrect constraints for the return value which under certain circumstances can allow an address unit register to be used as the first operand of a CMP instruction. This isn't a valid instruction however as the encodings only allow a data unit to be specified. This would result in an assembler error like the following: Error: failed to assemble instruction: "CMP A0.2,D0Ar6" Fix by changing the constraint from "=&da" (assigned, early clobbered, data or address unit register) to "=&d" (data unit register only). The constraint for the second operand, "bd" (an op2 register where op1 is a data unit register and the instruction supports O2R) is already correct assuming the first operand is a data unit register. Other cases of CMP in inline asm have had their constraints checked, and appear to all be fine. Fixes: 6006c0d8ce94 ("metag: Atomics, locks and bitops") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.9.x-
2016-08-04Input: silead - remove some dead codeDan Carpenter
buf[0] is an unsigned char. touch_nr is an int. The test for negative here doesn't make sense so I have removed it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-04Input: sis-i2c - select CONFIG_CRC_ITU_TArnd Bergmann
The newly added sis_i2c driver fails to link without the CRC_ITU_T driver enabled: drivers/input/touchscreen/sis_i2c.o: In function `sis_ts_irq_handler': sis_i2c.c:(.text+0xc0): undefined reference to `crc_itu_t' This adds a Kconfig select statement. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a485cb037fe6 ("Input: add driver for SiS 9200 family I2C touchscreen controllers") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-04Merge branches 'misc' and 'rxe' into k.o/for-4.8-1Doug Ledford
2016-08-04Soft RoCE driverMoni Shoua
Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-04dm raid: fix use of wrong status char during resynchronizationHeinz Mauelshagen
During a resynchronization, device status char 'a' is output on the raid status line for every device of a RAID set. It changes from 'a' to 'A' (unless device failure) when the resynchronization completes. Interrupting and restarting a resynchronization, by reloading the DM table, erroneously lead to status char 'A'. Fix this by avoiding setting the MD_RECOVERY_REQUESTED flag in raid_preresume(). Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-04Merge tag 'media/v4.8-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media DocBook removal and some fixups from Mauro Carvalho Chehab: - removal of the media DocBook (since it's all in Sphinx now) - videobuf2: Fix an allocation regression - a few fixes related to the CEC drivers * tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] cec: fix off-by-one memset [media] staging: add MEDIA_SUPPORT dependency [media] vivid: don't handle CEC_MSG_SET_STREAM_PATH [media] media: adv7180: Fix broken interrupt register access [media] vb2: Fix allocation size of dma_parms [media] vim2m: copy the other colorspace-related fields as well [media] adv7511: fix VIC autodetect doc-rst: Remove the media docbook
2016-08-04Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "The only interesting thing here is Jessica's patch to add ro_after_init support to modules. The rest are all trivia" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: extable.h: add stddef.h so "NULL" definition is not implicit modules: add ro_after_init support jump_label: disable preemption around __module_text_address(). exceptions: fork exception table content from module.h into extable.h modules: Add kernel parameter to blacklist modules module: Do a WARN_ON_ONCE() for assert module mutex not held Documentation/module-signing.txt: Note need for version info if reusing a key module: Invalidate signatures on force-loaded modules module: Issue warnings when tainting kernel module: fix redundant test. module: fix noreturn attribute for __module_put_and_exit()
2016-08-04Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge even more updates from Andrew Morton: - dma-mapping API cleanup - a few cleanups and misc things - use jump labels in dynamic-debug * emailed patches from Andrew Morton <akpm@linux-foundation.org>: dynamic_debug: add jump label support jump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABEL arm: jump label may reference text in __exit tile: support static_key usage in non-module __exit sections sparc: support static_key usage in non-module __exit sections powerpc: add explicit #include <asm/asm-compat.h> for jump label drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warning MAINTAINERS: update email and list of Samsung HW driver maintainers block: remove BLK_DEV_DAX config option samples/kretprobe: fix the wrong type samples/kretprobe: convert the printk to pr_info/pr_err samples/jprobe: convert the printk to pr_info/pr_err samples/kprobe: convert the printk to pr_info/pr_err dma-mapping: use unsigned long for dma_attrs media: mtk-vcodec: remove unused dma_attrs include/linux/bitmap.h: cleanup tree-wide: replace config_enabled() with IS_ENABLED() drivers/fpga/Kconfig: fix build failure
2016-08-04dynamic_debug: add jump label supportJason Baron
Although dynamic debug is often only used for debug builds, sometimes its enabled for production builds as well. Minimize its impact by using jump labels. This reduces the text section by 7000+ bytes in the kernel image below. It does increase data, but this should only be referenced when changing the direction of the branches, and hence usually not in cache. text data bss dec hex filename 8194852 4879776 925696 14000324 d5a0c4 vmlinux.pre 8187337 4960224 925696 14073257 d6bda9 vmlinux.post Link: http://lkml.kernel.org/r/d165b465e8c89bc582d973758d40be44c33f018b.1467837322.git.jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04jump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABELJason Baron
The current jump_label.h includes bug.h for things such as WARN_ON(). This makes the header problematic for inclusion by kernel.h or any headers that kernel.h includes, since bug.h includes kernel.h (circular dependency). The inclusion of atomic.h is similarly problematic. Thus, this should make jump_label.h 'includable' from most places. Link: http://lkml.kernel.org/r/7060ce35ddd0d20b33bf170685e6b0fab816bdf2.1467837322.git.jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04arm: jump label may reference text in __exitJason Baron
The jump table can reference text found in an __exit section. Thus, instead of discarding it at build time, include EXIT_TEXT as part of __init and it will be released when the system boots. Link: http://lkml.kernel.org/r/60284113bb759121e8ae3e99af1535647e52123f.1467837322.git.jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04tile: support static_key usage in non-module __exit sectionsChris Metcalf
Previously, all the __exit sections were just dropped by the link phase. However, if there are static_key (jump label) constructs in __exit sections that are not modules, the link fails with the message: `.exit.text' referenced in section `__jump_table' of xxx.o: defined in discarded section `.exit.text' of xxx.o Support this usage by keeping the .exit.text sections in the final image if JUMP_LABEL is defined, then discarding them once initialization is complete. Link: http://lkml.kernel.org/r/bfd7c107c610c30e992868ebfe2a5d796a097464.1467837322.git.jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04sparc: support static_key usage in non-module __exit sectionsJason Baron
The jump table can reference text found in an __exit section. Thus, instead of discarding it at build/link time, include EXIT_TEXT as part of __init and release it at system boot time. Without this patch the link fails with: `.exit.text' referenced in section `__jump_table' of xxx.o: defined in discarded section `.exit.text' of xxx.o Link: http://lkml.kernel.org/r/d822da427ab07a02a394602eca687104ff682f83.1467837322.git.jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04powerpc: add explicit #include <asm/asm-compat.h> for jump labelJason Baron
The stringify_in_c() macro may not be included. Make the dependency explicit. Link: http://lkml.kernel.org/r/564720c5328edd53c9d56db325be7215440eec3e.1467837322.git.jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Joe Perches <joe@perches.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warningArnd Bergmann
The addition of jump label support in dynamic_debug caused an unexpected warning in exactly one file in the kernel: drivers/media/dvb-frontends/cxd2841er.c: In function 'cxd2841er_tune_tc': include/linux/dynamic_debug.h:134:3: error: 'carrier_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^~~~~~~~~~~~~~~~~ drivers/media/dvb-frontends/cxd2841er.c:3177:11: note: 'carrier_offset' was declared here int ret, carrier_offset; ^~~~~~~~~~~~~~ The problem seems to be that the compiler gets confused by the extra conditionals in static_branch_unlikely, to the point where it can no longer keep track of which branches have already been taken, and it doesn't realize that this variable is now always initialized when it gets used. I have done lots of randconfig kernel builds and could not find any other file with this behavior, so I assume it's a rare enough glitch that we don't need to change the jump label support but instead just work around the warning in the driver. To achieve that, I'm moving the check for the return value into the switch() statement, which is an obvious transformation, but is enough to un-confuse the compiler here. The resulting code is not as nice to read, but at least we retain the behavior of warning if it gets changed to actually access an uninitialized carrier offset value in the future. Link: http://lkml.kernel.org/r/20160713204342.1221511-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Abylay Ospan <aospan@netup.ru> Cc: Sergey Kozlov <serjk@netup.ru> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04MAINTAINERS: update email and list of Samsung HW driver maintainersKamil Debski
Change my email address in the MAINTAINERS file. Add new maintainers of selected Samsung HW drivers. Link: http://lkml.kernel.org/r/1470060703-20423-1-git-send-email-k.debski@samsung.com Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kamil Debski <kamil@wypas.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04block: remove BLK_DEV_DAX config optionRoss Zwisler
The functionality for block device DAX was already removed with commit acc93d30d7d4 ("Revert "block: enable dax for raw block devices"") However, we still had a config option hanging around that was always disabled because it depended on CONFIG_BROKEN. This config option was introduced in commit 03cdadb04077 ("block: disable block device DAX by default") This change reverts that commit, removing the dead config option. Link: http://lkml.kernel.org/r/20160729182314.6368-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04samples/kretprobe: fix the wrong typeHuang Shijie
The regs_return_value() returns "unsigned long" or "long" value. But the retval is int type now, it may cause overflow, the log may becomes: [ 2911.078869] do_brk returned -2003877888 and took 4620 ns to execute This patch converts the retval to "unsigned long" type, and fixes the overflow issue. Link: http://lkml.kernel.org/r/1464143083-3877-4-git-send-email-shijie.huang@arm.com Signed-off-by: Huang Shijie <shijie.huang@arm.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04samples/kretprobe: convert the printk to pr_info/pr_errHuang Shijie
We prefer to use the pr_* to print out the log now, this patch converts the printk to pr_info. In the error path, use the pr_err to replace the printk. Link: http://lkml.kernel.org/r/1464143083-3877-3-git-send-email-shijie.huang@arm.com Signed-off-by: Huang Shijie <shijie.huang@arm.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04samples/jprobe: convert the printk to pr_info/pr_errHuang Shijie
We prefer to use the pr_* to print out the log now, this patch converts the printk to pr_info. In the error path, use the pr_err to replace the printk. Link: http://lkml.kernel.org/r/1464143083-3877-2-git-send-email-shijie.huang@arm.com Signed-off-by: Huang Shijie <shijie.huang@arm.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04samples/kprobe: convert the printk to pr_info/pr_errHuang Shijie
We prefer to use the pr_* to print out the log now, this patch converts the printk to pr_info. In the error path, use the pr_err to replace the printk. Link: http://lkml.kernel.org/r/1464143083-3877-1-git-send-email-shijie.huang@arm.com Signed-off-by: Huang Shijie <shijie.huang@arm.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04media: mtk-vcodec: remove unused dma_attrsKrzysztof Kozlowski
The local variable dma_attrs is set but never read. Link: http://lkml.kernel.org/r/1468399300-5399-1-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04include/linux/bitmap.h: cleanupAndrew Morton
Remove two unneeded `else's. Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04tree-wide: replace config_enabled() with IS_ENABLED()Masahiro Yamada
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04drivers/fpga/Kconfig: fix build failureSudip Mukherjee
While building m32r allmodconfig the build is failing with the error: ERROR: "bad_dma_ops" [drivers/fpga/zynq-fpga.ko] undefined! Xilinx Zynq FPGA is using DMA but there was no dependency while building. Link: http://lkml.kernel.org/r/1464346526-13913-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04arm64: Fix copy-on-write referencing in HugeTLBSteve Capper
set_pte_at(.) will set or unset the PTE_RDONLY hardware bit before writing the entry to the table. This can cause problems with the copy-on-write logic in hugetlb_cow: *) hugetlb_cow(.) called to handle a write fault on read only pte, *) Before the copy-on-write updates the new page table a call is made to pte_same(huge_ptep_get(ptep), pte)), to check for a race, *) Because set_pte_at(.) changed the pte, *ptep != pte, and the hugetlb_cow(.) code erroneously assumes that it lost the race, *) The new page is subsequently freed without being used. On arm64 this problem only becomes apparent when we apply: 67961f9 mm/hugetlb: fix huge page reserve accounting for private mappings When one runs the libhugetlbfs test suite, there are allocation errors and hugetlbfs pages become erroneously locked in memory as reserved. (There is a high HugePages_Rsvd: count). In this patch we introduce pte_same which ignores the PTE_RDONLY bit, allowing for the libhugetlbfs test suite to pass as expected and without leaking any reserved HugeTLB pages. Reported-by: Huang Shijie <shijie.huang@arm.com> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-08-04nvmx: mark ept single context invalidation as supportedBandan Das
Commit 4b855078601f ("KVM: nVMX: Don't advertise single context invalidation for invept") removed advertising single context invalidation since the spec does not mandate it. However, some hypervisors (such as ESX) require it to be present before willing to use ept in a nested environment. Advertise it and fallback to the global case. Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-04nvmx: remove comment about missing nested vpid supportBandan Das
Nested vpid is already supported and both single/global modes are advertised to the guest Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-04KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=offWanpeng Li
BUG: unable to handle kernel NULL pointer dereference at 000000000000008c IP: [<ffffffffc04e0180>] kvm_lapic_hv_timer_in_use+0x10/0x20 [kvm] PGD 0 Oops: 0000 [#1] SMP Call Trace: kvm_arch_vcpu_load+0x86/0x260 [kvm] vcpu_load+0x46/0x60 [kvm] kvm_vcpu_ioctl+0x79/0x7c0 [kvm] ? __lock_is_held+0x54/0x70 do_vfs_ioctl+0x96/0x6a0 ? __fget_light+0x2a/0x90 SyS_ioctl+0x79/0x90 do_syscall_64+0x7c/0x1e0 entry_SYSCALL64_slow_path+0x25/0x25 RIP [<ffffffffc04e0180>] kvm_lapic_hv_timer_in_use+0x10/0x20 [kvm] RSP <ffff8800db1f3d70> CR2: 000000000000008c ---[ end trace a55fb79d2b3b4ee8 ]--- This can be reproduced steadily by kernel_irqchip=off. We should not access preemption timer stuff if lapic is emulated in userspace. This patch fix it by avoiding access preemption timer stuff when kernel_irqchip=off. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-04KVM: documentation: fix KVM_CAP_X2APIC_API informationPaolo Bonzini
The KVM_X2APIC_API_USE_32BIT_IDS feature applies to both KVM_SET_GSI_ROUTING and KVM_SIGNAL_MSI, but was not mentioned in the documentation for the latter ioctl. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-04Merge tag 'kvm-arm-for-4.8-take2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Changes for v4.8 - Take 2 Includes GSI routing support to go along with the new VGIC and a small fix that has been cooking in -next for a while.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 13:16:01 +0000