| Age | Commit message (Collapse) | Author |
|---|
|
There was a bug in the previous logic that attempted to ensure gain cycling
gets inflight above BDP even for small BDPs. This code correctly raised and
lowered target inflight values during the gain cycle. And this code
correctly ensured that cwnd was raised when probing bandwidth. However, it
did not correspondingly ensure that cwnd was *not* raised in this way when
*not* probing for bandwidth. The result was that small-BDP flows that were
always cwnd-bound could go for many cycles with a fixed cwnd, and not probe
or yield bandwidth at all. This meant that multiple small-BDP flows could
fail to converge in their bandwidth allocations.
Fixes: 3c346b233c68 ("tcp_bbr: fix bw probing to raise in-flight data for very small BDPs")
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido Schimmel says:
====================
mlxsw: Various fixes
This patchset includes two small fixes for the mlxsw driver and one
patch which clarifies recently introduced devlink-trap documentation.
Patch #1 clears the port's VLAN filters during port initialization. This
ensures that the drop reason reported to the user is consistent. The
problem is explained in detail in the commit message.
Patch #2 clarifies the description of one of the traps exposed via
devlink-trap.
Patch #3 from Danielle forbids the installation of a tc filter with
multiple mirror actions since this is not supported by the device. The
failure is communicated to the user via extack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ASIC can only mirror a packet to one port, but when user is trying
to set more than one mirror action, it doesn't fail.
Add a check if more than one mirror action was specified per rule and if so,
fail for not being supported.
Fixes: d0d13c1858a11 ("mlxsw: spectrum_acl: Add support for mirror action")
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alex noted that the below description might not be obvious to all users.
Clarify it by adding an example.
Fixes: f3047ca01f12 ("Documentation: Add devlink-trap documentation")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Reviewed-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a port is created, its VLAN filters are not cleared by the
firmware. This causes tagged packets to be later dropped by the ingress
STP filters, which default to DISCARD state.
The above did not matter much until commit b5ce611fd96e ("mlxsw:
spectrum: Add devlink-trap support") where we exposed the drop reason to
users.
Without this patch, the drop reason users will see is not consistent. If
a port is enslaved to a VLAN-aware bridge and a packet with an invalid
VLAN tries to ingress the bridge, it will be dropped due to ingress STP
filter. If the VLAN is later enabled and then disabled, the packet will
be dropped by the ingress VLAN filter despite the above being a
seemingly NOP operation.
Fix this by clearing all the VLAN filters during port initialization.
Adjust the test accordingly.
Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There memset is indented incorrectly, remove the extraneous tabs.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The return statement is indented incorrectly, add in a missing
tab and remove an extraneous space after the return
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric
Pause capability is set. This issue is described in a Silicon Errata
(DS80000691D or DS80000692D), which advises to always disable the
capability.
Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause.
This patch apply the same workaround as the one for KSZ9031.
Fixes: 3aed3e2a143c ("net: phy: micrel: add Asym Pause workaround")
Signed-off-by: Hans Andersson <hans.andersson@cellavision.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until calling register_netdev(), ndev->dev_name isn't specified, and
netdev_err() displays "(unnamed net_device)".
ave 65000000.ethernet (unnamed net_device) (uninitialized): invalid phy-mode setting
ave: probe of 65000000.ethernet failed with error -22
This replaces netdev_err() with dev_err() before calling register_netdev().
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 415606588c61 ("PTP: introduce new versions of IOCTLs",
2019-09-13) introduced new versions of the PTP ioctls which actually
validate that the flags are acceptable values.
As part of this, it cleared the flags value using a bitwise
and+negation, in an attempt to prevent the old ioctl from accidentally
enabling new features.
This is incorrect for a couple of reasons. First, it results in
accidentally preventing previously working flags on the request ioctl.
By clearing the "valid" flags, we now no longer allow setting the
enable, rising edge, or falling edge flags.
Second, if we add new additional flags in the future, they must not be
set by the old ioctl. (Since the flag wasn't checked before, we could
potentially break userspace programs which sent garbage flag data.
The correct way to resolve this is to check for and clear all but the
originally valid flags.
Create defines indicating which flags are correctly checked and
interpreted by the original ioctls. Use these to clear any bits which
will not be correctly interpreted by the original ioctls.
In the future, new flags must be added to the VALID_FLAGS macros, but
*not* to the V1_VALID_FLAGS macros. In this way, new features may be
exposed over the v2 ioctls, but without breaking previous userspace
which happened to not clear the flags value properly. The old ioctl will
continue to behave the same way, while the new ioctl gains the benefit
of using the flags fields.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Christopher Hall <christopher.s.hall@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix help text typos for DIMLIB.
Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Tal Gilboa <talgi@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The regmap stride is set to 1 for regmap describing 8bit registers already.
However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This
is not correct, as the switch protocol supports unaligned register reads
and writes and the KSZ87xx even uses such unaligned register accesses to
read e.g. MIB counter.
This patch fixes MIB counter access on KSZ87xx.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Fixes: 46558d601cb6 ("net: dsa: microchip: Initial SPI regmap support")
Fixes: 255b59ad0db2 ("net: dsa: microchip: Factor out regmap config generation into common header")
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Add NFT_CHAIN_POLICY_UNSET to replace hardcoded -1 to
specify that the chain policy is unset. The chain policy
field is actually defined as an 8-bit unsigned integer.
2) Remove always true condition reported by smatch in
chain policy check.
3) Fix element lookup on dynamic sets, from Florian Westphal.
4) Use __u8 in ebtables uapi header, from Masahiro Yamada.
5) Bogus EBUSY when removing flowtable after chain flush,
from Laura Garcia Liebana.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In nfp_flower_spawn_vnic_reprs in the loop if initialization or the
allocations fail memory is leaked. Appropriate releases are added.
Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of
intermediate allocations or initializations fail memory is leaked.
requiered releases are added.
Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This a new feature, it is preferred that it defaults to N.
We will probe the feature support from userspace before actually using it.
Fixes: 95a7233c452a ('net: openvswitch: Set OvS recirc_id from tc chain index')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A user reported that vrf create fails when IPv6 is disabled at boot using
'ipv6.disable=1':
https://bugzilla.kernel.org/show_bug.cgi?id=204903
The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to
the check in vrf_fib_rule if ipv6_mod_enabled is disabled.
Fixes: e4a38c0c4b27 ("ipv6: add vrf table handling code for ipv6 mcast")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-09-27
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix libbpf's BTF dumper to not skip anonymous enum definitions, from Andrii.
2) Fix BTF verifier issues when handling the BTF of vmlinux, from Alexei.
3) Fix nested calls into bpf_event_output() from TCP sockops BPF
programs, from Allan.
4) Fix NULL pointer dereference in AF_XDP's xsk map creation when
allocation fails, from Jonathan.
5) Remove unneeded 64 byte alignment requirement of the AF_XDP UMEM
headroom, from Bjorn.
6) Remove unused XDP_OPTIONS getsockopt() call which results in an error
on older kernels, from Toke.
7) Fix a client/server race in tcp_rtt BPF kselftest case, from Stanislav.
8) Fix indentation issue in BTF's btf_enum_check_kflag_member(), from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vlad Buslov says:
====================
Fix Qdisc destroy issues caused by adding fine-grained locking to filter API
TC filter API unlocking introduced several new fine-grained locks. The
change caused sleeping-while-atomic BUGs in several Qdiscs that call cls
APIs which need to obtain new mutex while holding sch tree spinlock. This
series fixes affected Qdiscs by ensuring that cls API that became sleeping
is only called outside of sch tree lock critical section.
====================
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent changes that removed rtnl dependency from rules update path of tc
also made tcf_block_put() function sleeping. This function is called from
ops->destroy() of several Qdisc implementations, which in turn is called by
qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock,
which results sleeping-while-atomic BUG.
Steps to reproduce for sfb:
tc qdisc add dev ens1f0 handle 1: root sfb
tc qdisc add dev ens1f0 parent 1:10 handle 50: sfq perturb 10
tc qdisc change dev ens1f0 root handle 1: sfb
Resulting dmesg:
[ 7265.938717] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909
[ 7265.940152] in_atomic(): 1, irqs_disabled(): 0, pid: 28579, name: tc
[ 7265.941455] INFO: lockdep is turned off.
[ 7265.942744] CPU: 11 PID: 28579 Comm: tc Tainted: G W 5.3.0-rc8+ #721
[ 7265.944065] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 7265.945396] Call Trace:
[ 7265.946709] dump_stack+0x85/0xc0
[ 7265.947994] ___might_sleep.cold+0xac/0xbc
[ 7265.949282] __mutex_lock+0x5b/0x960
[ 7265.950543] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 7265.951803] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 7265.953022] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 7265.954248] tcf_block_put_ext.part.0+0x21/0x50
[ 7265.955478] tcf_block_put+0x50/0x70
[ 7265.956694] sfq_destroy+0x15/0x50 [sch_sfq]
[ 7265.957898] qdisc_destroy+0x5f/0x160
[ 7265.959099] sfb_change+0x175/0x330 [sch_sfb]
[ 7265.960304] tc_modify_qdisc+0x324/0x840
[ 7265.961503] rtnetlink_rcv_msg+0x170/0x4b0
[ 7265.962692] ? netlink_deliver_tap+0x95/0x400
[ 7265.963876] ? rtnl_dellink+0x2d0/0x2d0
[ 7265.965064] netlink_rcv_skb+0x49/0x110
[ 7265.966251] netlink_unicast+0x171/0x200
[ 7265.967427] netlink_sendmsg+0x224/0x3f0
[ 7265.968595] sock_sendmsg+0x5e/0x60
[ 7265.969753] ___sys_sendmsg+0x2ae/0x330
[ 7265.970916] ? ___sys_recvmsg+0x159/0x1f0
[ 7265.972074] ? do_wp_page+0x9c/0x790
[ 7265.973233] ? __handle_mm_fault+0xcd3/0x19e0
[ 7265.974407] __sys_sendmsg+0x59/0xa0
[ 7265.975591] do_syscall_64+0x5c/0xb0
[ 7265.976753] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 7265.977938] RIP: 0033:0x7f229069f7b8
[ 7265.979117] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5
4
[ 7265.981681] RSP: 002b:00007ffd7ed2d158 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 7265.983001] RAX: ffffffffffffffda RBX: 000000005d813ca1 RCX: 00007f229069f7b8
[ 7265.984336] RDX: 0000000000000000 RSI: 00007ffd7ed2d1c0 RDI: 0000000000000003
[ 7265.985682] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000165c9a0
[ 7265.987021] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001
[ 7265.988309] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000
In sfb_change() function use qdisc_purge_queue() instead of
qdisc_tree_flush_backlog() to properly reset old child Qdisc and save
pointer to it into local temporary variable. Put reference to Qdisc after
sch tree lock is released in order not to call potentially sleeping cls API
in atomic section. This is safe to do because Qdisc has already been reset
by qdisc_purge_queue() inside sch tree lock critical section.
Reported-by: syzbot+ac54455281db908c581e@syzkaller.appspotmail.com
Fixes: c266f64dbfa2 ("net: sched: protect block state with mutex")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent changes that removed rtnl dependency from rules update path of tc
also made tcf_block_put() function sleeping. This function is called from
ops->destroy() of several Qdisc implementations, which in turn is called by
qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock,
which results sleeping-while-atomic BUG.
Steps to reproduce for multiq:
tc qdisc add dev ens1f0 root handle 1: multiq
tc qdisc add dev ens1f0 parent 1:10 handle 50: sfq perturb 10
ethtool -L ens1f0 combined 2
tc qdisc change dev ens1f0 root handle 1: multiq
Resulting dmesg:
[ 5539.419344] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909
[ 5539.420945] in_atomic(): 1, irqs_disabled(): 0, pid: 27658, name: tc
[ 5539.422435] INFO: lockdep is turned off.
[ 5539.423904] CPU: 21 PID: 27658 Comm: tc Tainted: G W 5.3.0-rc8+ #721
[ 5539.425400] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 5539.426911] Call Trace:
[ 5539.428380] dump_stack+0x85/0xc0
[ 5539.429823] ___might_sleep.cold+0xac/0xbc
[ 5539.431262] __mutex_lock+0x5b/0x960
[ 5539.432682] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 5539.434103] ? __nla_validate_parse+0x51/0x840
[ 5539.435493] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 5539.436903] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 5539.438327] tcf_block_put_ext.part.0+0x21/0x50
[ 5539.439752] tcf_block_put+0x50/0x70
[ 5539.441165] sfq_destroy+0x15/0x50 [sch_sfq]
[ 5539.442570] qdisc_destroy+0x5f/0x160
[ 5539.444000] multiq_tune+0x14a/0x420 [sch_multiq]
[ 5539.445421] tc_modify_qdisc+0x324/0x840
[ 5539.446841] rtnetlink_rcv_msg+0x170/0x4b0
[ 5539.448269] ? netlink_deliver_tap+0x95/0x400
[ 5539.449691] ? rtnl_dellink+0x2d0/0x2d0
[ 5539.451116] netlink_rcv_skb+0x49/0x110
[ 5539.452522] netlink_unicast+0x171/0x200
[ 5539.453914] netlink_sendmsg+0x224/0x3f0
[ 5539.455304] sock_sendmsg+0x5e/0x60
[ 5539.456686] ___sys_sendmsg+0x2ae/0x330
[ 5539.458071] ? ___sys_recvmsg+0x159/0x1f0
[ 5539.459461] ? do_wp_page+0x9c/0x790
[ 5539.460846] ? __handle_mm_fault+0xcd3/0x19e0
[ 5539.462263] __sys_sendmsg+0x59/0xa0
[ 5539.463661] do_syscall_64+0x5c/0xb0
[ 5539.465044] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 5539.466454] RIP: 0033:0x7f1fe08177b8
[ 5539.467863] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5
4
[ 5539.470906] RSP: 002b:00007ffe812de5d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 5539.472483] RAX: ffffffffffffffda RBX: 000000005d8135e3 RCX: 00007f1fe08177b8
[ 5539.474069] RDX: 0000000000000000 RSI: 00007ffe812de640 RDI: 0000000000000003
[ 5539.475655] RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000182e9b0
[ 5539.477203] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001
[ 5539.478699] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000
Rearrange locking in multiq_tune() in following ways:
- In loop that removes Qdiscs from disabled queues, call
qdisc_purge_queue() instead of qdisc_tree_flush_backlog() on Qdisc that
is being destroyed. Save the Qdisc in temporary allocated array and call
qdisc_put() on each element of the array after sch tree lock is released.
This is safe to do because Qdiscs have already been reset by
qdisc_purge_queue() inside sch tree lock critical section.
- Do the same change for second loop that initializes Qdiscs for newly
enabled queues in multiq_tune() function. Since sch tree lock is obtained
and released on each iteration of this loop, just call qdisc_put()
directly outside of critical section. Don't verify that old Qdisc is not
noop_qdisc before releasing reference to it because such check is already
performed by qdisc_put*() functions.
Fixes: c266f64dbfa2 ("net: sched: protect block state with mutex")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent changes that removed rtnl dependency from rules update path of tc
also made tcf_block_put() function sleeping. This function is called from
ops->destroy() of several Qdisc implementations, which in turn is called by
qdisc_put(). Some Qdiscs call qdisc_put() while holding sch tree spinlock,
which results sleeping-while-atomic BUG.
Steps to reproduce for htb:
tc qdisc add dev ens1f0 root handle 1: htb default 12
tc class add dev ens1f0 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps
tc qdisc add dev ens1f0 parent 1:1 handle 40: sfq perturb 10
tc class add dev ens1f0 parent 1:1 classid 1:2 htb rate 100kbps ceil 100kbps
Resulting dmesg:
[ 4791.148551] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909
[ 4791.151354] in_atomic(): 1, irqs_disabled(): 0, pid: 27273, name: tc
[ 4791.152805] INFO: lockdep is turned off.
[ 4791.153605] CPU: 19 PID: 27273 Comm: tc Tainted: G W 5.3.0-rc8+ #721
[ 4791.154336] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 4791.155075] Call Trace:
[ 4791.155803] dump_stack+0x85/0xc0
[ 4791.156529] ___might_sleep.cold+0xac/0xbc
[ 4791.157251] __mutex_lock+0x5b/0x960
[ 4791.157966] ? console_unlock+0x363/0x5d0
[ 4791.158676] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 4791.159395] ? tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 4791.160103] tcf_chain0_head_change_cb_del.isra.0+0x1b/0xf0
[ 4791.160815] tcf_block_put_ext.part.0+0x21/0x50
[ 4791.161530] tcf_block_put+0x50/0x70
[ 4791.162233] sfq_destroy+0x15/0x50 [sch_sfq]
[ 4791.162936] qdisc_destroy+0x5f/0x160
[ 4791.163642] htb_change_class.cold+0x5df/0x69d [sch_htb]
[ 4791.164505] tc_ctl_tclass+0x19d/0x480
[ 4791.165360] rtnetlink_rcv_msg+0x170/0x4b0
[ 4791.166191] ? netlink_deliver_tap+0x95/0x400
[ 4791.166907] ? rtnl_dellink+0x2d0/0x2d0
[ 4791.167625] netlink_rcv_skb+0x49/0x110
[ 4791.168345] netlink_unicast+0x171/0x200
[ 4791.169058] netlink_sendmsg+0x224/0x3f0
[ 4791.169771] sock_sendmsg+0x5e/0x60
[ 4791.170475] ___sys_sendmsg+0x2ae/0x330
[ 4791.171183] ? ___sys_recvmsg+0x159/0x1f0
[ 4791.171894] ? do_wp_page+0x9c/0x790
[ 4791.172595] ? __handle_mm_fault+0xcd3/0x19e0
[ 4791.173309] __sys_sendmsg+0x59/0xa0
[ 4791.174024] do_syscall_64+0x5c/0xb0
[ 4791.174725] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 4791.175435] RIP: 0033:0x7f0aa41497b8
[ 4791.176129] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5
4
[ 4791.177532] RSP: 002b:00007fff4e37d588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 4791.178243] RAX: ffffffffffffffda RBX: 000000005d8132f7 RCX: 00007f0aa41497b8
[ 4791.178947] RDX: 0000000000000000 RSI: 00007fff4e37d5f0 RDI: 0000000000000003
[ 4791.179662] RBP: 0000000000000000 R08: 0000000000000001 R09: 00000000020149a0
[ 4791.180382] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001
[ 4791.181100] R13: 000000000047f640 R14: 0000000000000000 R15: 0000000000000000
In htb_change_class() function save parent->leaf.q to local temporary
variable and put reference to it after sch tree lock is released in order
not to call potentially sleeping cls API in atomic section. This is safe to
do because Qdisc has already been reset by qdisc_purge_queue() inside sch
tree lock critical section.
Fixes: c266f64dbfa2 ("net: sched: protect block state with mutex")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rds_bind(), laddr_check is called without checking if it is NULL or
not. And rs_transport should be reset if rds_add_bound() fails.
Fixes: c5c1a030a7db ("net/rds: An rds_sock is added too early to the hash table")
Reported-by: syzbot+fae39afd2101a17ec624@syzkaller.appspotmail.com
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
tcp: provide correct skb->priority
SO_PRIORITY socket option requests TCP egress packets
to contain a user provided value.
TCP manages to send most packets with the requested values,
notably for TCP_ESTABLISHED state, but fails to do so for
few packets.
These packets are control packets sent on behalf
of SYN_RECV or TIME_WAIT states.
Note that to test this with packetdrill, it is a bit
of a hassle, since packetdrill can not verify priority
of egress packets, other than indirect observations,
using for example sch_prio on its tunnel device.
The bad skb priorities cause problems for GCP,
as this field is one of the keys used in routing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ctl packets sent on behalf of TIME_WAIT sockets currently
have a zero skb->priority, which can cause various problems.
In this patch we :
- add a tw_priority field in struct inet_timewait_sock.
- populate it from sk->sk_priority when a TIME_WAIT is created.
- For IPv4, change ip_send_unicast_reply() and its two
callers to propagate tw_priority correctly.
ip_send_unicast_reply() no longer changes sk->sk_priority.
- For IPv6, make sure TIME_WAIT sockets pass their tw_priority
field to tcp_v6_send_response() and tcp_v6_send_ack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can populate skb->priority for some ctl packets
instead of always using zero.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, ip6_xmit() sets skb->priority based on sk->sk_priority
This is not desirable for TCP since TCP shares the same ctl socket
for a given netns. We want to be able to send RST or ACK packets
with a non zero skb->priority.
This patch has no functional change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BPF_PROG_TYPE_SOCK_OPS program can reenter bpf_event_output because it
can be called from atomic and non-atomic contexts since we don't have
bpf_prog_active to prevent it happen.
This patch enables 3 levels of nesting to support normal, irq and nmi
context.
We can easily reproduce the issue by running netperf crr mode with 100
flows and 10 threads from netperf client side.
Here is the whole stack dump:
[ 515.228898] WARNING: CPU: 20 PID: 14686 at kernel/trace/bpf_trace.c:549 bpf_event_output+0x1f9/0x220
[ 515.228903] CPU: 20 PID: 14686 Comm: tcp_crr Tainted: G W 4.15.0-smp-fixpanic #44
[ 515.228904] Hardware name: Intel TBG,ICH10/Ikaria_QC_1b, BIOS 1.22.0 06/04/2018
[ 515.228905] RIP: 0010:bpf_event_output+0x1f9/0x220
[ 515.228906] RSP: 0018:ffff9a57ffc03938 EFLAGS: 00010246
[ 515.228907] RAX: 0000000000000012 RBX: 0000000000000001 RCX: 0000000000000000
[ 515.228907] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff836b0f80
[ 515.228908] RBP: ffff9a57ffc039c8 R08: 0000000000000004 R09: 0000000000000012
[ 515.228908] R10: ffff9a57ffc1de40 R11: 0000000000000000 R12: 0000000000000002
[ 515.228909] R13: ffff9a57e13bae00 R14: 00000000ffffffff R15: ffff9a57ffc1e2c0
[ 515.228910] FS: 00007f5a3e6ec700(0000) GS:ffff9a57ffc00000(0000) knlGS:0000000000000000
[ 515.228910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 515.228911] CR2: 0000537082664fff CR3: 000000061fed6002 CR4: 00000000000226f0
[ 515.228911] Call Trace:
[ 515.228913] <IRQ>
[ 515.228919] [<ffffffff82c6c6cb>] bpf_sockopt_event_output+0x3b/0x50
[ 515.228923] [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10
[ 515.228927] [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100
[ 515.228930] [<ffffffff82cf90a5>] ? tcp_init_transfer+0x125/0x150
[ 515.228933] [<ffffffff82cf9159>] ? tcp_finish_connect+0x89/0x110
[ 515.228936] [<ffffffff82cf98e4>] ? tcp_rcv_state_process+0x704/0x1010
[ 515.228939] [<ffffffff82c6e263>] ? sk_filter_trim_cap+0x53/0x2a0
[ 515.228942] [<ffffffff82d90d1f>] ? tcp_v6_inbound_md5_hash+0x6f/0x1d0
[ 515.228945] [<ffffffff82d92160>] ? tcp_v6_do_rcv+0x1c0/0x460
[ 515.228947] [<ffffffff82d93558>] ? tcp_v6_rcv+0x9f8/0xb30
[ 515.228951] [<ffffffff82d737c0>] ? ip6_route_input+0x190/0x220
[ 515.228955] [<ffffffff82d5f7ad>] ? ip6_protocol_deliver_rcu+0x6d/0x450
[ 515.228958] [<ffffffff82d60246>] ? ip6_rcv_finish+0xb6/0x170
[ 515.228961] [<ffffffff82d5fb90>] ? ip6_protocol_deliver_rcu+0x450/0x450
[ 515.228963] [<ffffffff82d60361>] ? ipv6_rcv+0x61/0xe0
[ 515.228966] [<ffffffff82d60190>] ? ipv6_list_rcv+0x330/0x330
[ 515.228969] [<ffffffff82c4976b>] ? __netif_receive_skb_one_core+0x5b/0xa0
[ 515.228972] [<ffffffff82c497d1>] ? __netif_receive_skb+0x21/0x70
[ 515.228975] [<ffffffff82c4a8d2>] ? process_backlog+0xb2/0x150
[ 515.228978] [<ffffffff82c4aadf>] ? net_rx_action+0x16f/0x410
[ 515.228982] [<ffffffff830000dd>] ? __do_softirq+0xdd/0x305
[ 515.228986] [<ffffffff8252cfdc>] ? irq_exit+0x9c/0xb0
[ 515.228989] [<ffffffff82e02de5>] ? smp_call_function_single_interrupt+0x65/0x120
[ 515.228991] [<ffffffff82e020e1>] ? call_function_single_interrupt+0x81/0x90
[ 515.228992] </IRQ>
[ 515.228996] [<ffffffff82a11ff0>] ? io_serial_in+0x20/0x20
[ 515.229000] [<ffffffff8259c040>] ? console_unlock+0x230/0x490
[ 515.229003] [<ffffffff8259cbaa>] ? vprintk_emit+0x26a/0x2a0
[ 515.229006] [<ffffffff8259cbff>] ? vprintk_default+0x1f/0x30
[ 515.229008] [<ffffffff8259d9f5>] ? vprintk_func+0x35/0x70
[ 515.229011] [<ffffffff8259d4bb>] ? printk+0x50/0x66
[ 515.229013] [<ffffffff82637637>] ? bpf_event_output+0xb7/0x220
[ 515.229016] [<ffffffff82c6c6cb>] ? bpf_sockopt_event_output+0x3b/0x50
[ 515.229019] [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10
[ 515.229023] [<ffffffff82c29e87>] ? release_sock+0x97/0xb0
[ 515.229026] [<ffffffff82ce9d6a>] ? tcp_recvmsg+0x31a/0xda0
[ 515.229029] [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100
[ 515.229032] [<ffffffff82ce77c1>] ? tcp_set_state+0x191/0x1b0
[ 515.229035] [<ffffffff82ced10e>] ? tcp_disconnect+0x2e/0x600
[ 515.229038] [<ffffffff82cecbbb>] ? tcp_close+0x3eb/0x460
[ 515.229040] [<ffffffff82d21082>] ? inet_release+0x42/0x70
[ 515.229043] [<ffffffff82d58809>] ? inet6_release+0x39/0x50
[ 515.229046] [<ffffffff82c1f32d>] ? __sock_release+0x4d/0xd0
[ 515.229049] [<ffffffff82c1f3e5>] ? sock_close+0x15/0x20
[ 515.229052] [<ffffffff8273b517>] ? __fput+0xe7/0x1f0
[ 515.229055] [<ffffffff8273b66e>] ? ____fput+0xe/0x10
[ 515.229058] [<ffffffff82547bf2>] ? task_work_run+0x82/0xb0
[ 515.229061] [<ffffffff824086df>] ? exit_to_usermode_loop+0x7e/0x11f
[ 515.229064] [<ffffffff82408171>] ? do_syscall_64+0x111/0x130
[ 515.229067] [<ffffffff82e0007c>] ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: a5a3a828cd00 ("bpf: add perf event notificaton support for sock_ops")
Signed-off-by: Allan Zhang <allanzhang@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20190925234312.94063-2-allanzhang@google.com
|
|
The CPU port does not have a PHY connected to it. So calling
phy_support_asym_pause() results in an Opps. As with other DSA
drivers, add a guard that the port is a user port.
Reported-by: Michal Vokáč <michal.vokac@ysoft.com>
Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qdisc_root() use from netem_enqueue() triggers a lockdep warning.
__dev_queue_xmit() uses rcu_read_lock_bh() which is
not equivalent to rcu_read_lock() + local_bh_disable_bh as far
as lockdep is concerned.
WARNING: suspicious RCU usage
5.3.0-rc7+ #0 Not tainted
-----------------------------
include/net/sch_generic.h:492 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syz-executor427/8855:
#0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: lwtunnel_xmit_redirect include/net/lwtunnel.h:92 [inline]
#0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x2dc/0x2570 net/ipv4/ip_output.c:214
#1: 00000000b5525c01 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x20a/0x3650 net/core/dev.c:3804
#2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: spin_lock include/linux/spinlock.h:338 [inline]
#2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_xmit_skb net/core/dev.c:3502 [inline]
#2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_queue_xmit+0x14b8/0x3650 net/core/dev.c:3838
stack backtrace:
CPU: 0 PID: 8855 Comm: syz-executor427 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5357
qdisc_root include/net/sch_generic.h:492 [inline]
netem_enqueue+0x1cfb/0x2d80 net/sched/sch_netem.c:479
__dev_xmit_skb net/core/dev.c:3527 [inline]
__dev_queue_xmit+0x15d2/0x3650 net/core/dev.c:3838
dev_queue_xmit+0x18/0x20 net/core/dev.c:3902
neigh_hh_output include/net/neighbour.h:500 [inline]
neigh_output include/net/neighbour.h:509 [inline]
ip_finish_output2+0x1726/0x2570 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x5fc/0xb90 net/ipv4/ip_output.c:290
ip_finish_output+0x38/0x1f0 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_mc_output+0x292/0xf40 net/ipv4/ip_output.c:417
dst_output include/net/dst.h:436 [inline]
ip_local_out+0xbb/0x190 net/ipv4/ip_output.c:125
ip_send_skb+0x42/0xf0 net/ipv4/ip_output.c:1555
udp_send_skb.isra.0+0x6b2/0x1160 net/ipv4/udp.c:887
udp_sendmsg+0x1e96/0x2820 net/ipv4/udp.c:1174
inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:657
___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
__sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
__do_sys_sendmmsg net/socket.c:2442 [inline]
__se_sys_sendmmsg net/socket.c:2439 [inline]
__x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439
do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit a2c11b034142 ("kcm: use BPF_PROG_RUN")
syzbot easily triggers the warning in cant_sleep().
As explained in commit 6cab5e90ab2b ("bpf: run bpf programs
with preemption disabled") we need to disable preemption before
running bpf programs.
BUG: assuming atomic context at net/kcm/kcmsock.c:382
in_atomic(): 0, irqs_disabled(): 0, pid: 7, name: kworker/u4:0
3 locks held by kworker/u4:0/7:
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: __write_once_size include/linux/compiler.h:226 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_data kernel/workqueue.c:620 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:647 [inline]
#0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: process_one_work+0x88b/0x1740 kernel/workqueue.c:2240
#1: ffff8880a989fdc0 ((work_completion)(&strp->work)){+.+.}, at: process_one_work+0x8c1/0x1740 kernel/workqueue.c:2244
#2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: lock_sock include/net/sock.h:1522 [inline]
#2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: strp_sock_lock+0x2e/0x40 net/strparser/strparser.c:440
CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.3.0+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: kstrp strp_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
__cant_sleep kernel/sched/core.c:6826 [inline]
__cant_sleep.cold+0xa4/0xbc kernel/sched/core.c:6803
kcm_parse_func_strparser+0x54/0x200 net/kcm/kcmsock.c:382
__strp_recv+0x5dc/0x1b20 net/strparser/strparser.c:221
strp_recv+0xcf/0x10b net/strparser/strparser.c:343
tcp_read_sock+0x285/0xa00 net/ipv4/tcp.c:1639
strp_read_sock+0x14d/0x200 net/strparser/strparser.c:366
do_strp_work net/strparser/strparser.c:414 [inline]
strp_work+0xe3/0x130 net/strparser/strparser.c:423
process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
Fixes: a2c11b034142 ("kcm: use BPF_PROG_RUN")
Fixes: 6cab5e90ab2b ("bpf: run bpf programs with preemption disabled")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "gmac->phy_mode" variable is an enum and in this context GCC will
treat it as an unsigned int so the error handling will never be
triggered.
Fixes: b1c17215d718 ("stmmac: add ipq806x glue layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "priv->phy_mode" is an enum and in this context GCC will treat it
as an unsigned int so it can never be less than zero.
Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "iface" variable is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.
Fixes: b78624125304 ("of_mdio: Abstract a general interface for phy connect")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "lp->phy_mode" is an enum but in this context GCC treats it as an
unsigned int so the error handling is never triggered.
Fixes: ee06b1728b95 ("net: axienet: add support for standard phy-mode binding")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "dwmac->phy_mode" is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.
Fixes: 566e82516253 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "phy_mode" variable is an enum and in this context GCC treats it as
an unsigned int so the error handling is never triggered.
Fixes: 4c270b55a5af ("net: ethernet: socionext: add AVE ethernet driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "priv->if_mode" is type phy_interface_t which is an enum. In this
context GCC will treat the enum as an unsigned int so this error
handling is never triggered.
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "priv->phy_interface" variable is an enum and in this context GCC
will treat it as an unsigned int so the error handling is never
triggered.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "priv->phy_interface" variable is an enum and in this context GCC
will treat it as unsigned so the error handling will never be
triggered.
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "priv->phy_mode" variable is an enum and in this context GCC will
treat it as unsigned to the error handling will never trigger.
Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "chip" variable is an enum, and it's treated as unsigned int by GCC
in this context so the error handling isn't triggered.
Fixes: e8d452923ae6 ("cxgb4: clean up init_one")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The irqreturn_t type is an enum or an unsigned int in GCC. That
creates to problems because it can't detect if the
self->aq_hw_ops->hw_irq_read() call fails and at the end the function
always returns IRQ_HANDLED.
drivers/net/ethernet/aquantia/atlantic/aq_vec.c:316 aq_vec_isr_legacy() warn: unsigned 'err' is never less than zero.
drivers/net/ethernet/aquantia/atlantic/aq_vec.c:329 aq_vec_isr_legacy() warn: always true condition '(err >= 0) => (0-u32max >= 0)'
Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to Tal Gilboa the only benefit from DIM comes from a driver
that uses it. So it doesn't make sense to make this symbol user visible,
instead all drivers that use it should select it (as is already the case
AFAICT).
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.4
First set of fixes for 5.4 sent during the merge window. Most are
regressions fixes but the mt7615 problem has been since it was merged.
iwlwifi
* fix a build regression related CONFIG_THERMAL
* avoid using GEO_TX_POWER_LIMIT command on certain firmware versions
rtw88
* fixes for skb leaks
zd1211rw
* fix a compiler warning on 32 bit
mt76
* fix the firmware paths for mt7615 to match with linux-firmware
wil6210
* fix use of skb after free
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a statement that is indented one level too deeply, remove
the extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190925093835.19515-1-colin.king@canonical.com
|
|
BTF-to-C converter previously skipped anonymous enums in an assumption
that those are embedded in struct's field definitions. This is not
always the case and a lot of kernel constants are defined as part of
anonymous enums. This change fixes the logic by eagerly marking all
types as either referenced by any other type or not. This is enough to
distinguish two classes of anonymous enums and emit previously omitted
enum definitions.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190925203745.3173184-1-andriin@fb.com
|
|
Commit 7d9e5f422150 removed references from certain dsts, but accounting
for this never translated down into the fib6 suppression code. This bug
was triggered by WireGuard users who use wg-quick(8), which uses the
"suppress-prefix" directive to ip-rule(8) for routing all of their
internet traffic without routing loops. The test case added here
causes the reference underflow by causing packets to evaluate a suppress
rule.
Fixes: 7d9e5f422150 ("ipv6: convert major tx path to use RT6_LOOKUP_F_DST_NOREF")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
userspace openvswitch patch "(dpif-linux: Implement the API
functions to allow multiple handler threads read upcall)"
changes its type from U32 to UNSPEC, but leave the kernel
unchanged
and after kernel 6e237d099fac "(netlink: Relax attr validation
for fixed length types)", this bug is exposed by the below
warning
[ 57.215841] netlink: 'ovs-vswitchd': attribute type 5 has an invalid length.
Fixes: 5cd667b0a456 ("openvswitch: Allow each vport to have an array of 'port_id's")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document RZ/G2N (R8A774B1) SoC bindings.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
