summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-17e1000e: check down flag in tasksJesse Brandeburg
This change is part of a fix to avoid any tasks running while the driver is exiting and deinitializing resources. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-16Merge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: nfsd: correctly handle return value from nfsd_map_name_to_*
2011-02-17cifs: fix handling of scopeid in cifs_convert_addressJeff Layton
The code finds, the '%' sign in an ipv6 address and copies that to a buffer allocated on the stack. It then ignores that buffer, and passes 'pct' to simple_strtoul(), which doesn't work right because we're comparing 'endp' against a completely different string. Fix it by passing the correct pointer. While we're at it, this is a good candidate for conversion to strict_strtoul as well. Cc: stable@kernel.org Cc: David Howells <dhowells@redhat.com> Reported-by: Björn JACKE <bj@sernet.de> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-02-17Merge remote branch 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next ↵Dave Airlie
into drm-fixes * 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: drm/nouveau: fix suspend/resume on GPUs that don't have PM support drm/nouveau: flips/flipd need to always set 'evict' for move_accel_cleanup() drm/nv40: fix tiling-related setup for a number of chipsets drm/nouveau: fix non-EDIDful native mode selection drm/nouveau: Fix detection of DDC-based LVDS on DCB15 boards. drm/nv04-nv40: Fix NULL dereference when we fail to find an LVDS native mode. drm/nv10: Fix crash when allocating a BO larger than half the available VRAM.
2011-02-17drm/radeon/kms: add missing frac fb div flag for dce4+Alex Deucher
The fixed ref/post dividers are set by the AdjustPll table rather than the ss info table on dce4+. Make sure we enable the fractional feedback dividers when using a fixed post or ref divider on them as well. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=29272 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-17drm/radeon/kms: do not reject X16 and Y16X16 floating-point formats on r300Marek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-17ARM: S5P: Fix end address in memory resource information for UART devicesThomas Abraham
For S5P platforms, the end address in memory resource information for UART devices is one byte more than the intended value. Fix this by reducing the end address by one byte. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5P64X0: Cleanup map.h fileKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5P6442: Cleanup map.h fileKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5PC100: Clenaup map.h fileKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5PV210: Cleanup map.h fileKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17ARM: S5PV310: Cleanup map.h fileKukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-02-17drm/nouveau: fix suspend/resume on GPUs that don't have PM supportBen Skeggs
This has been broken since 2.6.37, and fixes resume on a couple of fermi boards I have access to. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-16Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi/pxa2xx pci: fix the release - remove race
2011-02-16block: revert block_dev read-only checkChuck Ebbert
This reverts commit 75f1dc0d076d ("block: check bdev_read_only() from blkdev_get()"). That commit added stricter checking to make sure devices that were being used read-only were actually opened in that mode. It turns out that the change breaks a bunch of kernel code that opens block devices. Affected systems include dm, md, and the loop device. Because strict checking for read-only opens of block devices was not done before this, the code that opens the devices was opening them read-write even if they were being used read-only. Auditing all that code will take time, and new userspace packages for dm, mdadm, etc. will also be required. Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-17drm/nouveau: flips/flipd need to always set 'evict' for move_accel_cleanup()Ben Skeggs
We free the temporary binding before leaving this function, so we also have to wait for the move to actually complete. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17drm/nv40: fix tiling-related setup for a number of chipsetsBen Skeggs
Due to the default case handling the older chipsets, a bunch of the newer ones ended up having the wrong tiling regs used. This commit switches the default case to handle the newest chipsets. This also makes nv4e touch the "extra" tiling regs. "nv" doesn't touch them for C51 but traces of the NVIDIA binary driver show it being done there. I couldn't find NV41/NV45 traces to confirm the behaviour there, but an educated guess was taken at each of them. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17drm/nouveau: fix non-EDIDful native mode selectionBen Skeggs
The DRM core fills this value, but at too late a stage for this to work, possibly resulting in an undesirable mode being selected. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17drm/nouveau: Fix detection of DDC-based LVDS on DCB15 boards.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17drm/nv04-nv40: Fix NULL dereference when we fail to find an LVDS native mode.Francisco Jerez
Reported-by: Alex Buell <alex.buell@munted.org.uk> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-17drm/nv10: Fix crash when allocating a BO larger than half the available VRAM.Francisco Jerez
Reported-by: Alex Buell <alex.buell@munted.org.uk> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-16nfsd: correctly handle return value from nfsd_map_name_to_*NeilBrown
These functions return an nfs status, not a host_err. So don't try to convert before returning. This is a regression introduced by 3c726023402a2f3b28f49b9d90ebf9e71151157d; I fixed up two of the callers, but missed these two. Cc: stable@kernel.org Reported-by: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-02-16PM / Hibernate: Return error code when alloc_image_page() failsStanislaw Gruszka
Currently we return 0 in swsusp_alloc() when alloc_image_page() fails. Fix that. Also remove unneeded "error" variable since the only useful value of error is -ENOMEM. [rjw: Fixed up the changelog and changed subject.] Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-16workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies longTejun Heo
MAYDAY_INITIAL_TIMEOUT is defined as HZ / 100 and depending on configuration may end up 0 or 1. Even when it's 1, depending on when the mayday timer is added in the current jiffy interval, it may expire way before a jiffy has passed. Make sure MAYDAY_INITIAL_TIMEOUT is at least two to guarantee that at least a full jiffy has passed before calling rescuers. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Ray Jui <rjui@broadcom.com> Cc: stable@kernel.org
2011-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla2xxx: Return DID_NO_CONNECT when FC device is lost. [SCSI] mptfusion: Bump version 03.04.18 [SCSI] mptfusion: Fix Incorrect return value in mptscsih_dev_reset [SCSI] mptfusion: mptctl_release is required in mptctl.c [SCSI] target: fix use after free detected by SLUB poison [SCSI] target: Remove procfs based target_core_mib.c code [SCSI] target: Fix SCF_SCSI_CONTROL_SG_IO_CDB breakage [SCSI] target: Fix top-level configfs_subsystem default_group shutdown breakage [SCSI] target: fixed missing lock drop in error path [SCSI] target: Fix demo-mode MappedLUN shutdown UA/PR breakage [SCSI] target/iblock: Fix failed bd claim NULL pointer dereference [SCSI] target: iblock/pscsi claim checking for NULL instead of IS_ERR [SCSI] scsi_debug: Fix 32-bit overflow in do_device_access causing memory corruption [SCSI] qla2xxx: Change from irq to irqsave with host_lock [SCSI] qla2xxx: Fix race that could hang kthread_stop()
2011-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha-s390 - Reset index after processing partial block
2011-02-16vfs: fix BUG_ON() in fs/namei.c:1461Linus Torvalds
When Al moved the nameidata_dentry_drop_rcu_maybe() call into the do_follow_link function in commit 844a391799c2 ("nothing in do_follow_link() is going to see RCU"), he mistakenly left the BUG_ON(inode != path->dentry->d_inode); behind. Which would otherwise be ok, but that BUG_ON() really needs to be _after_ dropping RCU, since the dentry isn't necessarily stable otherwise. So complete the code movement in that commit, and move the BUG_ON() into do_follow_link() too. This means that we need to pass in 'inode' as an argument (just for this one use), but that's a small thing. And eventually we may be confident enough in our path lookup that we can just remove the BUG_ON() and the unnecessary inode argument. Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-16workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'Tejun Heo
There are two spellings in use for 'freeze' + 'able' - 'freezable' and 'freezeable'. The former is the more prominent one. The latter is mostly used by workqueue and in a few other odd places. Unify the spelling to 'freezable'. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Dubov <oakad@yahoo.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Steven Whitehouse <swhiteho@redhat.com>
2011-02-16hwmon: (jc42) do not allow writing to locked registersClemens Ladisch
On systems where the temperature sensor is actually used, the BIOS is likely to have locked the alarm registers. In that case, all writes through the corresponding sysfs files would be silently ignored. To prevent this, detect the locks and make the affected sysfs files read-only. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16hwmon: (jc42) more helpful documentationClemens Ladisch
The documentation lists standard numbers and chip names in excruciating detail, but that's all it does. To help mere mortals in deciding whether to enable this driver, mention what this sensor is for and in which systems it might be found. Also add a link to the actual JC 42.4 specification. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16hwmon: (jc42) fix type mismatchClemens Ladisch
In set_temp_crit_hyst(), make the variable 'val' have the correct type for strict_strtoul(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-15Linux 2.6.38-rc5Linus Torvalds
2011-02-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: set flow handler for secondary interrupt controller of 5249 m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support m68knommu: fix dereference of port.tty m68knommu: add missing linker __modver section m68knommu: fix mis-named variable int set_irq_chip loop m68knommu: add optimize memmove() function m68k: remove arch specific non-optimized memcmp() m68knommu: fix use of un-defined _TIF_WORK_MASK m68knommu: Rename m548x_wdt.c to m54xx_wdt.c m68knommu: fix m548x_wdt.c compilation after headers renaming m68knommu: Remove dependencies on nonexistent M68KNOMMU
2011-02-16m68knommu: set flow handler for secondary interrupt controller of 5249Greg Ungerer
The secondary interrupt controller of the ColdFire 5249 code is not setting the edge triggered flow handler. Set it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform supportGreg Ungerer
The m68knommu arch does not define or use IRQ_FLG_LOCK in its irq subsystem. Remove obsolete use of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: fix dereference of port.ttyGreg Ungerer
The struct_tty associated with a port is now a direct pointer from within the local private driver info struct. So fix all uses of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: add missing linker __modver sectionGreg Ungerer
Add missing linker section __modver to fix: LD vmlinux /usr/local/bin/../m68k-uclinux/bin/ld.real: error: no memory region specified for loadable section `__modver' Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: fix mis-named variable int set_irq_chip loopGreg Ungerer
Compiling for 68360 targets gives: CC arch/m68knommu/platform/68360/ints.o arch/m68knommu/platform/68360/ints.c: In function ‘init_IRQ’: arch/m68knommu/platform/68360/ints.c:135:16: error: ‘irq’ undeclared (first use in this function) arch/m68knommu/platform/68360/ints.c:135:16: note: each undeclared identifier is reported only once for each function it appears in Fix variable name used. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: add optimize memmove() functionGreg Ungerer
Add an m68k/coldfire optimized memmove() function for the m68knommu arch. This is the same function as used by m68k. Simple speed tests show this is faster once buffers are larger than 4 bytes, and significantly faster on much larger buffers (4 times faster above about 100 bytes). This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memmove() fucntion defined, since there was none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68k: remove arch specific non-optimized memcmp()Greg Ungerer
The m68k arch implements its own memcmp() function. It is not optimized in any way (it is the most strait forward coding of memcmp you can get). Remove it and use the kernels standard memcmp() implementation. This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memcmp() function defined, since there is none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-02-15Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits) drm/radeon/kms: hopefully fix pll issues for real (v3) drm/radeon/kms: add bounds checking to avivo pll algo drm: fix wrong usages of drm_device in DRM Developer's Guide drm/radeon/kms: fix a few more atombios endian issues drm/radeon/kms: improve 6xx/7xx CS error output drm/radeon/kms: check AA resolve registers on r300 drm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300 drm/radeon/kms: use linear aligned for evergreen/ni bo blits drm/radeon/kms: use linear aligned for 6xx/7xx bo blits drm/radeon: fix race between GPU reset and TTM delayed delete thread. drm/radeon/kms: evergreen/ni big endian fixes (v2) drm/radeon/kms: 6xx/7xx big endian fixes drm/radeon/kms: atombios big endian fixes drm/radeon: 6xx/7xx non-kms endian fixes drm/radeon/kms: optimize CS state checking for r100->r500 drm: do not leak kernel addresses via /proc/dri/*/vma drm/radeon/kms: add connector table for mac g5 9600 radeon mkregtable: Add missing fclose() calls drm/radeon/kms: fix interlaced modes on dce4+ drm/radeon: fix memory debugging since d961db75ce86a84f1f04e91ad1014653ed7d9f46 ...
2011-02-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: pci: use security_capable() when checking capablities during config space read
2011-02-15thp: prevent hugepages during args/env copying into the user stackAndrea Arcangeli
Transparent hugepages can only be created if rmap is fully functional. So we must prevent hugepages to be created while is_vma_temporary_stack() is true. This also optmizes away some harmless but unnecessary setting of khugepaged_scan.address and it switches some BUG_ON to VM_BUG_ON. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-15Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / Video: Probe for output switch method when searching video devices. ACPI / Wakeup: Enable button GPEs unconditionally during initialization ACPI / ACPICA: Avoid crashing if _PRW is defined for the root object ACPI: Fix acpi_os_read_memory() and acpi_os_write_memory() (v2)
2011-02-15Merge branch 'tools-release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: tools: turbostat: style updates tools: turbostat: fix bitwise and operand
2011-02-15sparc64: Fix NMI startup bug which also breaks perf.David S. Miller
Doing NMI startup as an early initcall doesn't work because we need to have SMP started up by then. So we'd only NMI startup one cpu, which causes perf PMU grab to BUG because the nmi_active count isn't what it's supposed to be. This also points out that we don't have proper CPU up/down notifiers for the NMI code which will need to be fixed at some point. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-15Merge branch 'iomem' into releaseLen Brown
2011-02-15spi/pxa2xx pci: fix the release - remove raceSebastian Andrzej Siewior
Right now the platform device and its platform data is included in one big struct which requires its custom ->release function. The problem with the release function within the driver is that it might be called after the driver was removed because someone was holding a reference to it and it was not called right after platform_device_unregister(). So we also free the platform device memory to which one might hold a reference. This patch uses the normal pdev functions so this kind of race does not occur. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-15isdn: hisax: Use l2headersize() instead of dup (and buggy) func.David S. Miller
There was a bug in my commit c978e7bb77dfd2cd3d1f547fa4e395cfe47f02b2 ("hisax: Fix unchecked alloc_skb() return.") One of the l2->flag checks is wrong. Even worse it turns out I'm duplicating an existing function, so use that instead. Reported-by: Milton Miller <miltonm@bga.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-15Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (21 commits) dmaengine: add slave-dma maintainer dma: ipu_idmac: do not lose valid received data in the irq handler dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg() dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop() dmaengine: imx-sdma: return sdmac->status in sdma_tx_status() dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg() dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg() dmaengine i.MX dma: initialize dma capabilities outside channel loop dmaengine i.MX DMA: do not initialize chan_id field dmaengine i.MX dma: check sg entries for valid addresses and lengths dmaengine i.MX dma: set maximum segment size for our device dmaengine i.MX SDMA: reserve channel 0 by not registering it dmaengine i.MX SDMA: initialize dma capabilities outside channel loop dmaengine i.MX SDMA: do not initialize chan_id field dmaengine i.MX sdma: check sg entries for valid addresses and lengths dmaengine i.MX sdma: set maximum segment size for our device DMA: PL08x: fix channel pausing to timeout rather than lockup DMA: PL08x: fix infinite wait when terminating transfers dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie() dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0 ...