summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-29net/mlx5e: Use hard-coded 4K page size for RQ/SQ/CQAchiad Shochat
The page size of the device's RQ/SQ/CQ objects is defined in 4K units regardless of the system pages size. Thus using the Linux's PAGE_SHIFT macro yields wrong device configuration in systems where PAGE_SHIFT!=12. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net/mlx5_core: Check the return value of mlx5_command_exec()Haggai Abramonvsky
mlx5_cmd_exec() might fail - need to check return value. Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29openvswitch: Re-add CONFIG_OPENVSWITCH_VXLANThomas Graf
This readds the config option CONFIG_OPENVSWITCH_VXLAN to avoid a hard dependency of OVS on VXLAN. It moves the VXLAN config compat code to vport-vxlan.c and allows compliation as a module. Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device") Fixes: 2661371ace96 ("openvswitch: fix compilation when vxlan is a module") Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: pktgen: Remove unused 'allocated_skbs' fieldBogdan Hamciuc
Field pktgen_dev.allocated_skbs had been written to, but never read from. The number of allocated skbs can be deduced anyway, from the total number of sent packets and the 'clone_skb' param. Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: pktgen: Observe needed_headroom of the deviceBogdan Hamciuc
Allocate enough space so as not to force the outgoing net device to do skb_realloc_headroom(). Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29lwtunnel: Make lwtun_encaps[] staticThomas Graf
Any external user should use the registration API instead of accessing this directly. Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29gianfar: Fix warnings when built on 64-bitScott Wood
As part of defconfig consolidation using fragments, we'd like to be able to have the same drivers enabled on 32-bit and 64-bit. Gianfar happens to only exist on 32-bit systems, and when building the resulting 64-bit kernel warnings were produced. A couple of the warnings are trivial, but the rfbptr code has deeper issues. It uses the virtual address as the DMA address, which again, happens to work in the environments where this driver is currently used, but is not the right thing to do. Fixes: 45b679c9a3cc ("gianfar: Implement PAUSE frame generation support") Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29Merge branch 'sk_txhash'David S. Miller
Tom Herbert says: ==================== net: Initialize sk_hash to random value and reset for failing cnxs This patch set implements a common function to simply set sk_txhash to a random number instead of going through the trouble to call flow dissector. From dst_negative_advice we now reset the sk_txhash in hopes of finding a better ECMP path through the network. Changing sk_txhash affects: - IPv6 flow label and UDP source port which affect ECMP in the network - Local ECMP route selection (pending changes to use sk_txhash) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: Recompute sk_txhash on negative routing adviceTom Herbert
When a connection is failing a transport protocol calls dst_negative_advice to try to get a better route. This patch includes changing the sk_txhash in that function. This provides a rudimentary method to try to find a different path in the network since sk_txhash affects ECMP on the local host and through the network (via flow labels or UDP source port in encapsulation). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: Set sk_txhash from a random numberTom Herbert
This patch creates sk_set_txhash and eliminates protocol specific inet_set_txhash and ip6_set_txhash. sk_set_txhash simply sets a random number instead of performing flow dissection. sk_set_txash is also allowed to be called multiple times for the same socket, we'll need this when redoing the hash for negative routing advice. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29Merge branch 'thunderx_octeon_mdio'David S. Miller
Radha Mohan Chintakuntla says: ==================== Add MDIO support to ThunderX NIC driver This patch series adds MDIO support to ThunderX NIC driver by making use of existing mdio-octeon driver. In the process modified the mdio-octeon driver to work on both Octeon and ThunderX platforms. * From v1: - Removed default selection in Kconfig for MDIO_OCTEON - Replace uint64 with u64 as suggested by David Daney ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: thunderx: Select CONFIG_MDIO_OCTEON for ThunderX NICRadha Mohan Chintakuntla
The CONFIG_MDIO_OCTEON is required so that the ThunderX NIC driver can talk to the PHY drivers. Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: mdio-octeon: Fix octeon_mdiobus_probe function for return valuesRadha Mohan Chintakuntla
This patch fixes a possible crash in the octeon_mdiobus_probe function if the return values are not handled properly. Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: mdio-octeon: Modify driver to work on both ThunderX and OcteonRadha Mohan Chintakuntla
This patch modifies the mdio-octeon driver to work on both ThunderX and Octeon SoCs from Cavium Inc. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: netcp: Fixes efuse mac addr swap on k2e and k2lWingMan Kwok
On some of the K2E and K2L platforms, the two DWORDs in efuse occupied by the pre-programmed mac address for slave port 1 are swapped. To workaround this issue, this patch adds a new define NETCP_EFUSE_ADDR_SWAP (2) which signifies the occurrence of such swapping so that the driver can take proper action. The flag can be enabled in the corresponding netcp interface dts binding as efuse-mac = <2> under the corresponding netcp interface node. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29tipc: fix bug in broadcast synch message create functionJon Maloy
In commit d999297c3dbbe7fdd832f7fa4ec84301e170b3e6 ("tipc: reduce locking scope during packet reception") we introduced a new function tipc_build_bcast_sync_msg(), which carries initial synchronization data between two nodes at first contact and at re-contact. In this function, we missed to add synchronization data, with the effect that the broadcast link endpoints will fail to synchronize correctly at re-contact between a running and a restarted node. All other cases work as intended. With this commit, we fix this bug. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29packet: remove handling of tx_ring from prb_shutdown_retire_blk_timer()Tobias Klauser
Follow e8e85cc5eb57 ("packet: remove handling of tx_ring") and remove the tx_ring parameter from prb_shutdown_retire_blk_timer() as it is only called with tx_ring = 0. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29Merge branch 's390-bpf-push-pop'David S. Miller
Michael Holzheu says: ==================== s390/bpf: recache skb->data/hlen for skb_vlan_push/pop Here the s390 backend for Alexei's patch 4e10df9a60d9 ("bpf: introduce bpf_skb_vlan_push/pop() helpers") plus two bugfixes and two minor improvements. The first patch "s390/bpf: clear correct BPF accumulator register" will also go upstream via Martin's "fixes" branch. * v2: Integrated suggestions from Joe Perches ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29s390/bpf: recache skb->data/hlen for skb_vlan_push/popMichael Holzheu
Allow eBPF programs attached to TC qdiscs call skb_vlan_push/pop via helper functions. These functions may change skb->data/hlen. This data is cached by s390 JIT to improve performance of ld_abs/ld_ind instructions. Therefore after a change we have to reload the data. In case of usage of skb_vlan_push/pop, in the prologue we store the SKB pointer on the stack and restore it after BPF_JMP_CALL to skb_vlan_push/pop. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29s390/bpf: Only clear A and X for converted BPF programsMichael Holzheu
Only classic BPF programs that have been converted to eBPF need to clear the A and X registers. We can check for converted programs with: bpf_prog->type == BPF_PROG_TYPE_UNSPEC So add the check and skip initialization for real eBPF programs. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29s390/bpf: increase BPF_SIZE_MAXMichael Holzheu
Currently we have the restriction that jitted BPF programs can have a maximum size of one page. The reason is that we use short displacements for the literal pool. The 20 bit displacements are available since z990 and BPF requires z196 as minimum. Therefore we can remove this restriction and use everywhere 20 bit signed long displacements. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29s390/bpf: Fix multiple macro expansionsMichael Holzheu
The EMIT6_DISP_LH macro passes the "disp" parameter to the _EMIT6_DISP_LH macro. The _EMIT6_DISP_LH macro uses the "disp" parameter twice: unsigned int __disp_h = ((u32)disp) & 0xff000; unsigned int __disp_l = ((u32)disp) & 0x00fff; The EMIT6_DISP_LH is used several times with EMIT_CONST_U64() as "disp" parameter. Therefore always two constants are created per usage of EMIT6_DISP_LH. Fix this and add variable "_disp" to avoid multiple expansions. * v2: Move "_disp" to _EMIT6_DISP_LH as suggested by Joe Perches Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29s390/bpf: clear correct BPF accumulator registerMichael Holzheu
Currently we assumed the following BPF to eBPF register mapping: - BPF_REG_A -> BPF_REG_7 - BPF_REG_X -> BPF_REG_8 Unfortunately this mapping is wrong. The correct mapping is: - BPF_REG_A -> BPF_REG_0 - BPF_REG_X -> BPF_REG_7 So clear the correct registers and use the BPF_REG_A and BPF_REG_X macros instead of BPF_REG_0/7. Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net/mlx4_en: Hardware accelerated 802.1ad works only on the first portAmir Vadai
Fix mistakenly used, hard coded, port number in get_phv_bit() Fixes: 77fc29c ("net/mlx4_core: Preparations for 802.1ad VLAN support") Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29Merge branch 'stmmac-cleanup'David S. Miller
Joachim Eastwood says: ==================== stmmac clean up for 4.3 part2 This patch set creates proper probe functions in the remaining dwmac-* drivers, lets the drivers manage their own of match data structure, and cleans up some of the drivers a bit. Note that should be no functional change in any of the drivers. First patch from Fengguang fixes a Coccinelle that was found after the previous patch set when into next. Probe functions are best placed just above the platform_driver struct since it usually needs to call other functions in the driver but this requires some code movement in the drivers. To keep the conversion itself easier to review the code movement is done in separate patches. This creates some extra churn but I think it's worth it in this case. As only a couple of drivers actually needs to use of match data this pushed down from stmmac_platform and into the drivers. This also makes it possible for drivers to have their own match data structure. dwmac-rk benefits most from this. After each driver has it's own probe function and manages it's own match data the setup/free hooks and common match data struct are removed. Sorry for the slightly largish patch set this time around. Since I can only test the core changes on my platform and not the specific dwmac-drivers I greatly appreciate if people could test this on their respective platforms. I did spend quite a bit of time visually checking all these patches, but nothing beats real hardware testing. Thanks! Patch set based on net-next can also be picked up from here: https://github.com/manabian/linux-lpc.git stmmac_4.3_part2 For those who want to have a look at all the patches for v4.3 a branch based on Linus master can be found here: https://github.com/manabian/linux-lpc.git stmmac_4.2 Previous parts can be found here: http://www.spinics.net/lists/netdev/msg328997.html http://www.spinics.net/lists/netdev/msg329932.html http://www.spinics.net/lists/netdev/msg336097.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-sti: refactor the init glue callbacksJoachim Eastwood
Remove the two platform specific init callbacks and make them use a common one by creating a function member in the internal data structure. This allow us to remove the layer of indirection and simplify the code a bit. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: remove setup/free glue callbacksJoachim Eastwood
As all dwmac-* drivers have been converted to have a proper probe function the setup callback can now be removed. Also remove the free callback that wasn't used by any driver. New dwmac-* drivers should implement standard probe and remove functions to preform any needed setup and teardown. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: remove unused stmmac_of_data structJoachim Eastwood
As dwmac-* drivers that need OF match have been converted to use their own internal OF match data structure this can now be removed. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-rk: use rk_gmac_ops as of match dataJoachim Eastwood
Remove the setup glue callback and use rk_gmac_ops as OF match data so it can used directly when calling rk_gmac_setup. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-rk: make rk_gmac_ops structs static constJoachim Eastwood
Mark the rk_gmac_ops structures as static const as they should be. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-sti: use custom of match structureJoachim Eastwood
Create a new private structure for OF match data in the dwmac-sti driver. This enables us to eventually drop the common OF match data structure which contains a lot of unused fields. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: let dwmac-* drivers handle their own match dataJoachim Eastwood
Since only a few of the dwmac-* drivers actually need to use the OF match move handling into the dwmac-* drivers that need it. This will also allow dwmac-* drivers to use their own custom match data structure. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: move stmmac_pltfr_probe into dwmac-genericJoachim Eastwood
As all dwmac-* drivers now have their own probe function move the common one into dwmac-generic driver and drop the EXPORT. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-rk: create a new probe functionJoachim Eastwood
Create a new probe functions that call the necessary setup functions. This is done in preparation for a code refactor in this driver and dropping the common probe function in stmmac_platform.c. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-sti: turn setup callback into a probe functionJoachim Eastwood
By using a few functions from stmmac_platform a proper probe function can be created from the setup glue callback. This makes it look more like a standard driver and prepares the driver for further clean ups. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-sunxi: turn setup callback into a probe functionJoachim Eastwood
By using a few functions from stmmac_platform a proper probe function can be created from the setup glue callback. This makes it look more like a standard driver and the OF match data can also be dropped. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-sunxi: move sun7i_gmac_setup functionJoachim Eastwood
Move sun7i_gmac_setup in preparation for turning it into a proper probe function. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-socfpga: turn setup callback into a probe functionJoachim Eastwood
By using a few functions from stmmac_platform a proper probe function can be created from the setup glue callback. This makes it look more like a standard driver and the OF match data can also be dropped. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-socfpga: move socfpga_dwmac_probe functionJoachim Eastwood
Move socfpga_dwmac_probe in preparation for turning it into a proper probe function. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-ipq806x: turn setup callback into a probe functionJoachim Eastwood
By using a few functions from stmmac_platform a proper probe function can be created from the setup glue callback. This makes it look more like a standard driver and the OF match data can also be dropped. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: dwmac-ipq806x: move ipq806x_gmac_fix_mac_speed functionJoachim Eastwood
Move ipq806x_gmac_fix_mac_speed in preparation for turning the setup glue callback in a proper probe function. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29stmmac: fix ptr_ret.cocci warningFengguang Wu
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:304:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> [je: rebase and insert newline before return] Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-28Merge branch 'dwc_ethernet'David S. Miller
Lars Persson says: ==================== dwc_eth_qos: Add support for Synopsys DWC Ethernet QoS This is a driver supporting version 4.10a of the Synopsys DWC Ethernet QoS gigabit ethernet controller. The IP has changed significantly compared to the dwmac1000 so a separate driver is justified. The IP is highly configurable at synthesis time. This driver has been developed for a subset of the total available feature set. Currently it supports: * TSO * Checksum offload for RX and TX. * Energy efficient ethernet. * GMII phy interface. * The statistics module. * Single RX and TX queue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-28dwc_eth_qos: Add maintainer infoLars Persson
Add maintainer information for the Synopsys DWC Ethernet QOS driver. Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-28dwc_eth_qos: Add the synopsys folder to the build system.Lars Persson
Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-28dwc_eth_qos: Add support for Synopsys DWC Ethernet QoSLars Persson
This patch adds a platform driver for the new generation of the gigabit ethernet IP from Synopsys. It is developed for version 4.10a of the IP core. Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-28dwc_eth_qos: Add Synopsys DWC Ethernet QoS bindingsLars Persson
Add device tree binding documentation for the Synopsys DWC Ethernet QoS driver supporting revision 4.10a of the hardware IP. Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27Merge branch 'mlx4-802.1ad-accel'David S. Miller
Amir Vadai says: ==================== net/mlx4_en: Hardware accelerated 802.1ad This patchset by Hadar introduces support in Hardware accelerated 802.1ad, for ConnectX-3pro NIC's. In order to support existing deployment, and due to some hardware limitations, the feature is disabled by default, and needed to be enabled using a private flag in ethtool. Ofcourse user can enable the private flag only if hardware has support. After being enabled, the standard ethtool -k/-K can be used. Patchset was applied and tested over commit 71790a2 ("hv_netvsc: Add structs and handlers for VF messages") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/mlx4_en: Add support for hardware accelerated 802.1ad vlanHadar Hen Zion
To enable device support in accelerated 802.1ad vlan, the port capability "packet has vlan enable" (phv_en) should be set. Firmware won't work properly, in case phv_en is not set. The user can enable "phv_en" port capability with the new ethtool private flag phv-bit. The phv-bit private flag default value is OFF, users who are interested in 802.1ad hardware acceleration should turn ON the phv-bit private flag: $ ethtool --set-priv-flags eth1 phv-bit on Once the private flag is set, the device is ready for 802.1ad vlan acceleration. The user should also change the interface device features and turn on "tx-vlan-stag-hw-insert" which is off by default: $ ethtool -K eth1 tx-vlan-stag-hw-insert on "phv-bit" private flag setting is available only for Physical Functions(PF), the Virtual Function (VF) will be able to use the feature by setting "tx-vlan-stag-hw-insert" ethtool device feature only if the feature was enabled by the Hypervisor. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net/mlx4: Prepare VLAN macros for 802.1ad Hardware accelerated supportHadar Hen Zion
To add Hardware accelerated support in 802.1ad vlan, replace Current VLAN macros to CVLAN. Replace: MLX4_WQE_CTRL_INS_VLAN MLX4_CQE_VLAN_PRESENT_MASK With: MLX4_WQE_CTRL_INS_CVLAN MLX4_CQE_CVLAN_PRESENT_MASK Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 13:32:32 +0000