| Age | Commit message (Collapse) | Author |
|---|
|
Historically struct device_node references were tracked using a kref embedded as
a struct field. Commit 75b57ecf9d1d ("of: Make device nodes kobjects so they
show up in sysfs") (Mar 2014) refactored device_nodes to be kobjects such that
the device tree could by more simply exposed to userspace using sysfs.
Commit 0829f6d1f69e ("of: device_node kobject lifecycle fixes") (Mar 2014)
followed up these changes to better control the kobject lifecycle and in
particular the referecne counting via of_node_get(), of_node_put(), and
of_node_init().
A result of this second commit was that it introduced an of_node_put() call when
a dynamic node is detached, in of_node_remove(), that removes the initial kobj
reference created by of_node_init().
Traditionally as the original dynamic device node user the pseries code had
assumed responsibilty for releasing this final reference in its platform
specific DLPAR detach code.
This patch fixes a refcount underflow introduced by commit 0829f6d1f6, and
recently exposed by the upstreaming of the recount API.
Messages like the following are no longer seen in the kernel log with this
patch following DLPAR remove operations of cpus and pci devices.
rpadlpar_io: slot PHB 72 removed
refcount_t: underflow; use-after-free.
------------[ cut here ]------------
WARNING: CPU: 5 PID: 3335 at lib/refcount.c:128 refcount_sub_and_test+0xf4/0x110
Fixes: 0829f6d1f69e ("of: device_node kobject lifecycle fixes")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
[mpe: Make change log commit references more verbose]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently the code that dumps SLB entries uses a double-nested if. This
means the actual dumping logic is a bit squashed. Deindent it by using
continue.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Although most of these kprobes patches are powerpc specific, there's a couple
that touch generic code (with Acks). At the moment there's one conflict with
acme's tree, but it's not too bad. Still just in case some other conflicts show
up, we've put these in a topic branch so another tree could merge some or all of
it if necessary.
|
|
KPROBES_ON_FTRACE avoids much of the overhead of regular kprobes as it
eliminates the need for a trap, as well as the need to emulate or single-step
instructions.
Though OPTPROBES provides us with similar performance, we have limited
optprobes trampoline slots. As such, when asked to probe at a function
entry, default to using the ftrace infrastructure.
With:
# cd /sys/kernel/debug/tracing
# echo 'p _do_fork' > kprobe_events
before patch:
# cat ../kprobes/list
c0000000000daf08 k _do_fork+0x8 [DISABLED]
c000000000044fc0 k kretprobe_trampoline+0x0 [OPTIMIZED]
and after patch:
# cat ../kprobes/list
c0000000000d074c k _do_fork+0xc [DISABLED][FTRACE]
c0000000000412b0 k kretprobe_trampoline+0x0 [OPTIMIZED]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
kprobe_lookup_name() is specific to the kprobe subsystem and may not always
return the function entry point (in a subsequent patch for KPROBES_ON_FTRACE).
For looking up function entry points, introduce a separate helper and use it
in optprobes.c
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Allow kprobes to be placed on ftrace _mcount() call sites. This optimization
avoids the use of a trap, by riding on ftrace infrastructure.
This depends on HAVE_DYNAMIC_FTRACE_WITH_REGS which depends on MPROFILE_KERNEL,
which is only currently enabled on powerpc64le with newer toolchains.
Based on the x86 code by Masami.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Pass the real LR to the ftrace handler. This is needed for KPROBES_ON_FTRACE for
the pre handlers.
Also, with KPROBES_ON_FTRACE, the link register may be updated by the pre
handlers or by a registed kretprobe. Honor updated LR by restoring it from
pt_regs, rather than from the stack save area.
Live patch and function graph continue to work fine with this change.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Blacklist all the exception common/OOL handlers as the kernel stack is not yet
setup, which means we can't take a trap at this point.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Introduce __head_end to mark end of the early fixed sections and use it to
blacklist all exception handlers from kprobes.
mpe: We do not need to do anything special for relocatable kernels, where the
exception vectors are split from the main kernel, as the split vectors are
already excluded by the check for kernel_text_address().
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Move __head_end outside #ifdef 64-bit to unbreak the 32-bit build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Along similar lines as commit 9326638cbee2 ("kprobes, x86: Use NOKPROBE_SYMBOL()
instead of __kprobes annotation"), convert __kprobes annotation to either
NOKPROBE_SYMBOL() or nokprobe_inline. The latter forces inlining, in which case
the caller needs to be added to NOKPROBE_SYMBOL().
Also:
- blacklist arch_deref_entry_point(), and
- convert a few regular inlines to nokprobe_inline in lib/sstep.c
A key benefit is the ability to detect such symbols as being
blacklisted. Before this patch:
$ cat /sys/kernel/debug/kprobes/blacklist | grep read_mem
$ perf probe read_mem
Failed to write event: Invalid argument
Error: Failed to add events.
$ dmesg | tail -1
[ 3736.112815] Could not insert probe at _text+10014968: -22
After patch:
$ cat /sys/kernel/debug/kprobes/blacklist | grep read_mem
0xc000000000072b50-0xc000000000072d20 read_mem
$ perf probe read_mem
read_mem is blacklisted function, skip it.
Added new events:
(null):(null) (on read_mem)
probe:read_mem (on read_mem)
You can now use it in all perf tools, such as:
perf record -e probe:read_mem -aR sleep 1
$ grep " read_mem" /proc/kallsyms
c000000000072b50 t read_mem
c0000000005f3b40 t read_mem
$ cat /sys/kernel/debug/kprobes/list
c0000000005f3b48 k read_mem+0x8 [DISABLED]
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Minor change log formatting, fix up some conflicts]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Move the stack setup and teardown code into ftrace_graph_caller(). This way, we
don't incur the cost of setting it up unless function graph is enabled for this
function.
Also, remove the extraneous LR restore code after the function graph stub. LR
has previously been restored and neither livepatch_handler() nor
ftrace_graph_caller() return back here.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Drop bad change to non-mprofile-kernel version of ftrace_graph_caller]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
set_current_kprobe() already saves regs->msr into kprobe_saved_msr. Remove the
redundant save.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The idle workaround does not need to load PACATOC, and it does not
need to be called within a nested function that requires LR to be
saved.
Load the PACATOC at entry to the idle wakeup. It does not matter which
PACA this comes from, so it's okay to call before the workaround. Then
apply the workaround to get the right PACA.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
If not all threads were in winkle, full state loss recovery is not
necessary and can be avoided. A previous patch removed this optimisation
due to some complexity with the implementation. Re-implement it by
counting the number of threads in winkle with the per-core idle state.
Only restore full state loss if all threads were in winkle.
This has a small window of false positives right before threads execute
winkle and just after they wake up, when the winkle count does not
reflect the true number of threads in winkle. This is not a significant
problem in comparison with even the minimum winkle duration. For
correctness, a false positive is not a problem (only false negatives
would be).
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When taking the core idle state lock, grab it immediately like a regular
lock, rather than adding more tests in there. Holding the lock keeps it
stable, so there is no need to do it whole holding the reservation.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In preparation for adding more bits to the core idle state word, move
the lock bit up, and unlock by flipping the lock bit rather than masking
off all but the thread bits.
Add branch hints for atomic operations while we're here.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The ISA specifies power save wakeup due to a machine check exception can
cause a machine check interrupt (rather than the usual system reset
interrupt).
The machine check handler copes with this by doing low level machine
check recovery without restoring full state from idle, then queues up a
machine check event for logging, then directly executes the same idle
instruction it woke from. This minimises the work done before recovery
is performed.
The problem is that it requires machine specific instructions and
knowledge of the book3s idle code. Currently it only has code to handle
POWER8 idle, so POWER9 crashes when trying to execute the P8 idle
instructions which don't exist in ISAv3.0B.
cpu 0x0: Vector: e40 (Emulation Assist) at [c0000000008f3810]
pc: c000000000008380: machine_check_handle_early+0x130/0x2f0
lr: c00000000053a098: stop_loop+0x68/0xd0
sp: c0000000008f3a90
msr: 9000000000081001
current = 0xc0000000008a1080
paca = 0xc00000000ffd0000 softe: 0 irq_happened: 0x01
pid = 0, comm = swapper/0
Instead of going to sleep after recovery, do the usual idle wakeup and
state restoration by calling into the normal idle wakeup path. This
reuses the normal idle wakeup paths.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This reduces the number of nops for POWER8.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The POWER8 idle code has a neat trick of programming the power on engine
to restore a low bit into HSPRG0, so idle wakeup code can test and see
if it has been programmed this way and therefore lost all state. Restore
time can be reduced if winkle has not been reached.
However this messes with our r13 PACA pointer, and requires HSPRG0 to be
written to. It also optimizes the slowest and most uncommon case at the
expense of another SPR write in the common nap state wakeup.
Remove this complexity and assume winkle sleeps always require a state
restore. This speedup could be made entirely contained within the winkle
idle code by counting per-core winkles and setting a thread bitmap when
all have gone to winkle.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
No functional change.
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The system reset idle handler system_reset_idle_common is relocated, so
relocation is not required to branch to kvm_start_guest. The superfluous
relocation does not result in incorrect code, but it does not compile
outside of exception-64s.S (with fixed section definitions).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add powerpc support for mmap_rnd_bits and mmap_rnd_compat_bits, which are two
sysctls that allow a user to configure the number of bits of randomness used for
ASLR.
Because of the way the Kconfig for ARCH_MMAP_RND_BITS is defined, we have to
construct at least the MIN value in Kconfig, vs in a header which would be more
natural. Given that we just go ahead and do it all in Kconfig.
At least according to the code (the documentation makes no mention of it), the
value is defined as the number of bits of randomisation *of the page*, not the
address. This makes some sense, with larger page sizes more of the low bits are
forced to zero, which would reduce the randomisation if we didn't take the
PAGE_SIZE into account. However it does mean the min/max values have to change
depending on the PAGE_SIZE in order to actually limit the amount of address
space consumed by the randomisation.
The result of that is that we have to define the default values based on both
32-bit vs 64-bit, but also the configured PAGE_SIZE. Furthermore now that we
have 128TB address space support on Book3S, we also have to take that into
account.
Finally we can wire up the value in arch_mmap_rnd().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
|
|
The default implementation of ioremap_cache() is aliased to ioremap().
On powerpc ioremap() creates cache-inhibited mappings by default which
is almost certainly not what you wanted.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
On kprobe handler re-entry, try to emulate the instruction rather than single
stepping always.
Acked-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Factor out code to emulate instruction into a try_to_emulate()
helper function. This makes no functional changes.
Acked-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
With ABIv2, we offset 8 bytes into a function to get at the local entry
point.
mpe: NB this function is currently not called, the change to generic code to
call it is being merged via the tip tree.
Acked-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
commit 239aeba76409 ("perf powerpc: Fix kprobe and kretprobe handling with
kallsyms on ppc64le") changed how we use the offset field in struct kprobe on
ABIv2. perf now offsets from the global entry point if an offset is specified
and otherwise chooses the local entry point.
Fix the same in kernel for kprobe API users. We do this by extending
kprobe_lookup_name() to accept an additional parameter to indicate the offset
specified with the kprobe registration. If offset is 0, we return the local
function entry and return the global entry point otherwise.
With:
# cd /sys/kernel/debug/tracing/
# echo "p _do_fork" >> kprobe_events
# echo "p _do_fork+0x10" >> kprobe_events
before this patch:
# cat ../kprobes/list
c0000000000d0748 k _do_fork+0x8 [DISABLED]
c0000000000d0758 k _do_fork+0x18 [DISABLED]
c0000000000412b0 k kretprobe_trampoline+0x0 [OPTIMIZED]
and after:
# cat ../kprobes/list
c0000000000d04c8 k _do_fork+0x8 [DISABLED]
c0000000000d04d0 k _do_fork+0x10 [DISABLED]
c0000000000412b0 k kretprobe_trampoline+0x0 [OPTIMIZED]
Acked-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The macro is now pretty long and ugly on powerpc. In the light of further
changes needed here, convert it to a __weak variant to be over-ridden with a
nicer looking function.
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Skip preparing optprobe if the probe is ftrace-based, since anyway, it
must not be optimized (or already optimized by ftrace).
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Hypervisor Virtualization and Directed Hypervisor Doorbell interrupt handlers
use the macro EXC_VIRT_OOL_MASKABLE_HV for their relocation-on handlers, which
calls MASKABLE_RELON_EXCEPTION_HV_OOL, which uses the *real mode* interrupt
prolog. This means we needlessly rfid from virtual mode to virtual mode.
For POWER8 it only affects doorbell IPIs. Context switch microbenchmark between
threads with snooze disabled (which causes IPI) gets about 3% faster, about 370
cycles. Should be more important on POWER9 with global doorbells and HVI for
host interrupts.
Use the RELON variant instead to reduce overhead.
Fixes: 1707dd1613 ("powerpc: Save CFAR before branching in interrupt entry paths")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fold some more detail into the change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Dan Carpenter noticed that the code in __xive_native_disable_queue() has a for
loop with an unconditional break in the middle, which doesn't make a lot of
sense.
What the code's supposed to do is loop as long as OPAL says it's busy, if we get
any other return code, either success or failure, then we should break the loop.
So add the missing check.
Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Power9 DD1 does not implement SAO. Although it's not widely used, its presence
or absence is visible to user space via arch_validate_prot() so it's moderately
important that we get the value right.
Fixes: 7dccfbc325bb ("powerpc/book3s: Add a cpu table entry for different POWER9 revs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Power9 does not implement the icswx instruction. This CPU feature is not visible
to userspace and is only used in the CONFIG_PPC_ICSWX code, which is generally
not enabled, and can only be triggered by other code using icswx, which should
not happen on Power9 systems in the first place. So impact should be minimal.
Fixes: c3ab300ea5 ("powerpc: Add POWER9 cputable entry")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Patch add "mem_access" event to sysfs. This as-is not a raw event
supported by Power8 pmu. Instead, it is formed based on
raw event encoding specificed in isa207-common.h.
Primary PMU event used here is PM_MRK_INST_CMPL.
This event tracks only the completed marked instructions.
Random sampling mode (MMCRA[SM]) with Random Instruction
Sampling (RIS) is enabled to mark type of instructions.
With Random sampling in RLS mode with PM_MRK_INST_CMPL event,
the LDST /DATA_SRC fields in SIER identifies the memory
hierarchy level (eg: L1, L2 etc) statisfied a data-cache
miss for a marked instruction.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Patch to export SIER bits to userspace via
perf_mem_data_src and perf_sample_data struct.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Patch to export SIER bits to userspace via
perf_mem_data_src and perf_sample_data struct.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Threshold feature when used with MMCRA [Threshold Event Counter Event],
MMCRA[Threshold Start event] and MMCRA[Threshold End event] will update
MMCRA[Threashold Event Counter Exponent] and MMCRA[Threshold Event
Counter Multiplier] with the corresponding threshold event count values.
Patch to export MMCRA[TECX/TECM] to userspace in 'weight' field of
struct perf_sample_data.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The LDST field and DATA_SRC in SIER identifies the memory hierarchy level
(eg: L1, L2 etc), from which a data-cache miss for a marked instruction
was satisfied. Use the 'perf_mem_data_src' object to export this
hierarchy level to user space.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
perf_mem_data_src is a union that is initialized in the kernel via the ->val
field and accessed by userspace via the mem_xxx bitfields. For this to work
correctly on big endian platforms, we need a big-endian definition for the
bitfields.
Currently on a big endian system, if a user requests PERF_SAMPLE_DATA_SRC (perf
report -d), they will get the default value from perf_sample_data_init(), which
is PERF_MEM_NA. The value for PERF_MEM_NA is constructed using shifts:
/* TLB access */
#define PERF_MEM_TLB_NA 0x01 /* not available */
...
#define PERF_MEM_TLB_SHIFT 26
#define PERF_MEM_S(a, s) \
(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
#define PERF_MEM_NA (PERF_MEM_S(OP, NA) |\
PERF_MEM_S(LVL, NA) |\
PERF_MEM_S(SNOOP, NA) |\
PERF_MEM_S(LOCK, NA) |\
PERF_MEM_S(TLB, NA))
Which works out as:
((0x01 << 0) | (0x01 << 5) | (0x01 << 19) | (0x01 << 24) | (0x01 << 26))
Which means the PERF_MEM_NA value comes out of the kernel as 0x5080021
in CPU endian.
But then in the perf tool, the code uses the bitfields to inspect the value, and
currently the bitfields are defined using little endian ordering.
So eg. in perf_mem__tlb_scnprintf() we see:
data_src->val = 0x5080021
op = 0x0
lvl = 0x0
snoop = 0x0
lock = 0x0
dtlb = 0x0
rsvd = 0x5080021
Because of the way the perf tool code is written this is still displayed to the
user as "N/A", so there is no bug visible at the UI level.
Currently there are no big endian architectures which export a meaningful
value (ie. other than PERF_MEM_NA), so the extent of the bug on big endian
platforms is that the PERF_MEM_NA value is exported incorrectly as described
above. Subsequent patches will add support on big endian powerpc for populating
the data source value.
This patch does a minimal fix of adding big endian definition of the bitfields
to match the values that are already exported by the kernel on big endian. And
it makes no change on little endian.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The CMA pages migration code does not support compound pages at
the moment so it performs few tests before proceeding to actual page
migration.
One of the tests - PageTransHuge() - has VM_BUG_ON_PAGE(PageTail()) as
it is designed to be called on head pages only. Since we also test for
PageCompound(), and it contains PageTail() and PageHead(), we can
simplify the check by leaving just PageCompound() and therefore avoid
possible VM_BUG_ON_PAGE.
Fixes: 2e5bbb5461f1 ("KVM: PPC: Book3S HV: Migrate pinned pages out of CMA")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
As part of the new large address space support, processes start out life with a
128TB virtual address space. However when calling mmap() a process can pass a
hint address, and if that hint is > 128TB the kernel will use the full 512TB
address space to try and satisfy the mmap() request.
Currently we have a check that the hint is > 128TB and < 512TB (TASK_SIZE),
which was added as an optimisation to avoid updating addr_limit unnecessarily
and also to avoid calling slice_flush_segments() on all CPUs more than
necessary.
However this has the user-visible side effect that an mmap() hint above 512TB
does not search the full address space unless a preceding mmap() used a hint
value > 128TB && < 512TB.
So fix it to treat any hint above 128TB as a hint to search the full address
space, instead of checking the hint against TASK_SIZE, we instead check if the
addr_limit is already == TASK_SIZE.
This also brings the ABI in-line with what is proposed on x86. ie, that a hint
address above 128TB up to and including (2^64)-1 is an indication to search the
full address space.
Fixes: f4ea6dcb08ea2c (powerpc/mm: Enable mappings above 128TB)
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add support for future IBM Coherent Accelerator (CXL) devices
with an IDs of 0x0623 and 0x0628.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The TLB flush for radix first flushes TLB for radix configuration,
then flushes for hash configuration. The second flush is unnecessary
but does not affect correctness.
Fixes: 1a472c9dba6b9 ("powerpc/mm/radix: Add tlbflush routines")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We don't init addr_limit correctly for 32 bit applications. So default to using
mm->task_size for boundary condition checking. We use addr_limit to only control
free space search. This makes sure that we do the right thing with 32 bit
applications.
We should consolidate the usage of TASK_SIZE/mm->task_size and
mm->context.addr_limit later.
This partially reverts commit fbfef9027c2a7ad (powerpc/mm: Switch some
TASK_SIZE checks to use mm_context addr_limit).
Fixes: fbfef9027c2a ("powerpc/mm: Switch some TASK_SIZE checks to use mm_context addr_limit")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The XIVE enablement patches included a change to set the LPES (Logical
Partitioning Environment Selector) bit (bit # 3) in LPCR (Logical Partitioning
Control Register) on POWER9 hosts. This bit sets external interrupts to guest
delivery mode, which uses SRR0/1. The host's EE interrupt handler is written to
expect HSRR0/1 (for earlier CPUs). This should be fine because XIVE is
configured not to deliver EEs to the host (Hypervisor Virtulization Interrupt is
used instead) so the EE handler should never be executed.
However a bug in interrupt controller code, hardware, or odd configuration of a
simulator could result in the host getting an EE incorrectly. Keeping the EE
delivery mode matching the host EE handler prevents strange crashes due to using
the wrong exception registers.
KVM will configure the LPCR to set LPES prior to running a guest so that EEs are
delivered to the guest using SRR0/1.
Fixes: 08a1e650cc ("powerpc: Fixup LPCR:PECE and HEIC setting on POWER9")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Massage change log to avoid referring to LPES0 which is now renamed LPES]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The pseries platform supports Power4 and later CPUs, all of which are
multithreaded and/or multicore.
In practice no one ever builds a SMP=n kernel for these machines. So as
we did for powernv, have the pseries platform imply SMP=y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The powernv platform supports Power7 and later CPUs, all of which are
multithreaded and multicore.
As such we never build a SMP=n kernel for those machines, other than
possibly for debugging or running in a simulator.
In the debugging case we can get a similar effect by booting with
nr_cpus=1, or there's always the option of building a custom kernel with
SMP hacked out.
For running in simulators the code size reduction from building without
SMP is not particularly important, what matters is the number of
instructions executed. A quick test shows that a SMP=y kernel takes ~6%
more instructions to boot to a shell. Booting with nr_cpus=1 recovers
about half that deficit.
On the flip side, keeping the SMP=n kernel building can be a pain at
times. And although we've mostly kept it building in recent years, no
one is regularly testing that the SMP=n kernel actually boots and works
well on these machines.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Of the 64-bit Book3S platforms, only powermac supports booting on an
actual non-SMP system. The other platforms can be built with SMP
disabled, but it doesn't make a lot of sense given the CPUs they support
are all multicore or multithreaded.
So give platforms the option of forcing SMP=y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently powerpc's asm/io.h includes linux/io.h, and linux/io.h
includes asm/io.h.
This can cause problems because depending on which is included first the
order of definitions between the two files will change.
The include of linux/io.h was added back in 2008 in commit b41e5fffe8b8
("[POWERPC] devres: Add devm_ioremap_prot()"). It's not entirely clear
it was needed then, but devm_ioremap_prot() has since been removed
entirely as unused, in dedd24a12fe6 ("powerpc: Remove unused
devm_ioremap_prot()").
So it seems to be unnecessary and can potentially cause problems, so
remove the include of linux/io.h from asm/io.h
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
POWER9 requires msgsync for receiver-side synchronization, and a DD1
workaround restricts IPIs to core-local.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop no longer needed asm feature macro changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
