summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-08-20sh: Relax devfn constraints for SH7786 PCIe.Paul Mundt
SH7786 PCIe has 1 slot per port, but no specific restriction on function. Relax the devfn restriction and look to the slot number instead when configured as a root complex. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20sh: Fix up SH7786 PCIe PHY initialization.Paul Mundt
This brings the clocking and register setting in line with the somewhat factually ambiguous specification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20sh: Support type 1 accesses for SH7786 PCI.Paul Mundt
This enables support for type 1 config space accesses on the SH7786 PCI controller. At the same time, add in some extra sanity checks for controller asserted errors. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-07-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix page flip finish vs. prepare on plane B drm/i915: change default panel fitting mode to preserve aspect ratio drm/i915: fix uninitialized variable warning in i915_setup_compression() drm/i915: take struct_mutex in i915_dma_cleanup() drm/i915: Fix CRT hotplug regression in 2.6.35-rc1 i915: fix ironlake edp panel setup (v4) drm/i915: don't access FW_BLC_SELF on 965G drm/i915: Account for space on the ring buffer consumed whilst wrapping. drm/i915: gen3 page flipping fixes drm/i915: don't queue flips during a flip pending event drm/i915: Fix incorrect intel_ring_begin size in BSD ringbuffer. drm/i915: Turn on 945 self-refresh only if single CRTC is active drm/i915/gen4: Fix interrupt setup ordering drm/i915: Use RSEN instead of HTPLG for tfp410 monitor detection. drm/i915: Move non-phys cursors into the GTT Revert "drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on)." (Included the "fix page flip finish vs. prepare on plane B" patch from Jesse on top of the pull request from Eric. -- Linus)
2010-07-01drm/i915: fix page flip finish vs. prepare on plane BJesse Barnes
The refreshed patch had a copy & paste bug. Reported-by: Simon Farnsworth <simon.farnsworth@onelan.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-01Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1 ahci,ata_generic: let ata_generic handle new MBP w/ MCP89 libahci: Fix bug in storing EM messages
2010-07-01correct console log level when ERST ACPI table is not foundDaniel J Blueman
When booting 2.6.35-rc3 on a x86 system without an ERST ACPI table with the 'quiet' option, we still observe an "ERST: Table is not found!" warning. Quiesce it to the same info log level as the other 'table not found' warnings. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-01drm/i915: fix hibernation since i915 self-reclaim fixesLinus Torvalds
Since commit 4bdadb9785696439c6e2b3efe34aa76df1149c83 ("drm/i915: Selectively enable self-reclaim"), we've been passing GFP_MOVABLE to the i915 page allocator where we weren't before due to some over-eager removal of the page mapping gfp_flags games the code used to play. This caused hibernate on Intel hardware to result in a lot of memory corruptions on resume. See for example http://bugzilla.kernel.org/show_bug.cgi?id=13811 Reported-by: Evengi Golov (in bugzilla) Signed-off-by: Dave Airlie <airlied@redhat.com> Tested-by: M. Vefa Bicakci <bicave@superonline.com> Cc: stable@kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-01drm/i915: change default panel fitting mode to preserve aspect ratioJesse Barnes
We did this a long time ago in the DDX driver, but now this fix belongs in the kernel. Preserving the aspect ratio is a nicer default. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=18033. Tested-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-01drm/i915: fix uninitialized variable warning in i915_setup_compression()Prarit Bhargava
Fixes: drivers/gpu/drm/i915/i915_dma.c: In function ‘i915_setup_compression’: drivers/gpu/drm/i915/i915_dma.c:1311: error: ‘compressed_llb’ may be used uninitialized in this function Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-01drm/i915: take struct_mutex in i915_dma_cleanup()Dan Carpenter
intel_cleanup_ring_buffer() calls drm_gem_object_unreference() (as opposed to drm_gem_object_unreference_unlocked()) so it needs to be called with "struct_mutex" held. If we don't hold the lock, it triggers a BUG_ON(!mutex_is_locked(&dev->struct_mutex)); I also audited the other places that call intel_cleanup_ring_buffer() and they all hold the lock so they're OK. This was introduced in: 8187a2b70e3 "drm/i915: introduce intel_ring_buffer structure (V2)" and it's a regression from v2.6.34. Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=16247 Signed-off-by: Dan Carpenter <error27@gmail.com> Reported-by: Benny Halevy <bhalevy@panasas.com> Tested-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-01drm/i915: Fix CRT hotplug regression in 2.6.35-rc1Andy Lutomirski
Commit 7a772c492fcfffae812ffca78a628e76fa57fe58 has two bugs which made the hotplug problems on my laptop worse instead of better. First, it did not, in fact, disable the CRT plug interrupt -- it disabled all the other hotplug interrupts. It seems rather doubtful that that bit of the patch fixed anything, so let's just remove it. (If you want to add it back, you probably meant ~CRT_HOTPLUG_INT_EN.) Second, on at least my GM45, setting CRT_HOTPLUG_ACTIVATION_PERIOD_64 and CRT_HOTPLUG_VOLTAGE_COMPARE_50 (when they were previously unset) causes a hotplug interrupt about three seconds later. The old code never restored PORT_HOTPLUG_EN so this could only happen once, but they new code restores those registers. So just set those bits when we set up the interrupt in the first place. Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-01i915: fix ironlake edp panel setup (v4)Dave Airlie
The eDP spec claims a 20% overhead for the 8:10 encoding scheme used on the wire. Take this into account when picking the lane/clock speed for the panel. v3: some panels are out of spec, try our best to deal with them, don't refuse modes on eDP panels, and try the largest allowed settings if all else fails on eDP. v4: fix stupid typo, forgot to git add before amending. Fixes several reports in bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28070 Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-01drm/i915: don't access FW_BLC_SELF on 965GJesse Barnes
The register offset for FW_BLC_SELF is a totally different set of bits on Broadwater (it's actually MI_RDRET_STATE), so don't treat it like FW_BLC_SELF on 965G chips. Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=26874. Cc: stable@kernel.org Tested-by: Norman Yarvin <yarvin@yarchive.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-01drm/i915: Account for space on the ring buffer consumed whilst wrapping.Chris Wilson
If we fill the tail of the physical ring buffer with NOOP when wrapping, we need to account for the reduction in available space. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-01ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1Tejun Heo
IDE mode of MCP89 on MBP 7,1 doesn't set DMA enable bits in the BMDMA status register. Make the following changes to work around the problem. * Instead of using hard coded 1 in id->driver_data as class code match, use ATA_GEN_CLASS_MATCH and carry the matched id in host->private_data. * Instead of matching PCI_VENDOR_ID_CENATEK, use ATA_GEN_FORCE_DMA flag in id instead. * Add ATA_GEN_FORCE_DMA to the id entry of MBP 7,1. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Cc: stable@kernel.org Reported-by: Anders Østhus <grapz666@gmail.com> Reported-by: Andreas Graf <andreas_graf@csgraf.de> Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Reported-by: Damien Cassou <damien.cassou@gmail.com> Reported-by: tixetsal@juno.com Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-07-01ahci,ata_generic: let ata_generic handle new MBP w/ MCP89Tejun Heo
For yet unknown reason, MCP89 on MBP 7,1 doesn't work w/ ahci under linux but the controller doesn't require explicit mode setting and works fine with ata_generic. Make ahci ignore the controller on MBP 7,1 and let ata_generic take it for now. Reported in bko#15923. https://bugzilla.kernel.org/show_bug.cgi?id=15923 NVIDIA is investigating why ahci mode doesn't work. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Cc: stable@kernel.org Reported-by: Anders Østhus <grapz666@gmail.com> Reported-by: Andreas Graf <andreas_graf@csgraf.de> Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Reported-by: Damien Cassou <damien.cassou@gmail.com> Reported-by: tixetsal@juno.com Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-07-01libahci: Fix bug in storing EM messagesHarry Zhang
In function ahci_store_em_buffer(), if the input (signed char*) buffer contains negative data, the constructed 32-bit long message data may be wrong. Signed-off-by: Harry Zhang <harry.zhang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-07-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: docs: add an entry for imx2_wdt
2010-07-01Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits) drm/radeon/kms: remove rv100 bios connector quirk drm/radeon/kms/pm: fix power state indexing on igp chips in dynpm mode DRM / radeon / KMS: Fix hibernation regression related to radeon PM (was: Re: [Regression, post-2.6.34] Hibernation broken on machines with radeon/KMS and r300) drm/radeon/kms/igp: fix possible divide by 0 in bandwidth code (v2) drm/radeon: add quirk to make HP nx6125 laptop resume. drm/radeon/kms: add some missing regs to evergreen gpu init drm/radeon/kms: fix typos in evergreen command checker drm/radeon/kms: avoid oops on mac r4xx cards fb: fix colliding defines for fb flags. drm/radeon/kms: Force HDP_NONSURF to maximum size drm/radeon/kms: disable frac fb dividers for rs6xx drm/radeon/kms: don't read attempt to read bios from VRAM on unposted GPU. drm/radeon/kms: fix typo in evergreen_gpu_init drm/radeon/kms: return ret in cursor_set failure path drm/ttm: non pooled page allocation should have GFP_USER set drm/radeon/r100/r200: fix calculation of compressed cube maps drm/radeon/r200: handle more hw tex coord types drm/radeon/kms: CS checker texture fixes for r1xx/r2xx/r3xx drm/radeon: add fake RN50 table for powerpc drm/fb: Fix video= mode computation ...
2010-07-01Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix spinaphore down_spin()
2010-07-01watchdog: docs: add an entry for imx2_wdtFabio Estevam
Add an entry for imx2_wdt in watchdog-parameters.txt Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-07-01drm/radeon/kms: remove rv100 bios connector quirkAlex Deucher
Some RV100 cards with 2 VGA ports show up with DVI+VGA, however some boards with DVI+VGA have the same subsystem ids. Better to have a VGA port show up as DVI than having a non-useable DVI port. reported by DHR in irc. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms/pm: fix power state indexing on igp chips in dynpm modeAlex Deucher
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28745 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Tested-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01DRM / radeon / KMS: Fix hibernation regression related to radeon PM (was: ↵Rafael J. Wysocki
Re: [Regression, post-2.6.34] Hibernation broken on machines with radeon/KMS and r300) There is a regression from 2.6.34 related to the recent radeon power management changes, caused by attempting to cancel a delayed work item that's never been scheduled. However, the code as is has some other issues potentially leading to visible problems. First, the mutex around cancel_delayed_work() in radeon_pm_suspend() doesn't really serve any purpose, because cancel_delayed_work() only tries to delete the work's timer. Moreover, it doesn't prevent the work handler from running, so the handler can do some wrong things if it wins the race and in that case it will rearm itself to do some more wrong things going forward. So, I think it's better to wait for the handler to return in case it's already been queued up for execution. Also, it should be prevented from rearming itself in that case. Second, in radeon_set_pm_method() the cancel_delayed_work() is not sufficient to prevent the work handler from running and queing up itself for the next run (the failure scenario is that cancel_delayed_work() returns 0, so the handler is run, it waits on the mutex and then rearms itself after the mutex has been released), so again the work handler should be prevented from rearming itself in that case.. Finally, there's a potential deadlock in radeon_pm_fini(), because cancel_delayed_work_sync() is called under rdev->pm.mutex, but the work handler tries to acquire the same mutex (if it wins the race). Fix the issues described above. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms/igp: fix possible divide by 0 in bandwidth code (v2)Alex Deucher
Some IGP systems specify the system memory clock in the Firmware table rather than the IGP info table. Check both and make sure we have a value system memory clock value. v2: make sure rs690_pm_info is called on rs780/rs880 as well. fixes a regression since 07d4190327b02ab3aaad25a2d168f79d92e8f8c2. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon: add quirk to make HP nx6125 laptop resume.Dave Airlie
For some reason on resume, executing the BIOS scripts locks up the whole chipset, by avoiding the dynclk table the machine resumes properly and seems to function okay. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: add some missing regs to evergreen gpu initAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: fix typos in evergreen command checkerAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: avoid oops on mac r4xx cardsAlex Deucher
They don't have an atombios so don't attempt to use it for eng/mem clocks. Reported by spoonb on #radeon fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28671 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01fb: fix colliding defines for fb flags.Dave Airlie
When I added the flags I must have been using a 25 line terminal and missed the following flags. The collided with flag has one user in staging despite being in-tree for 5 years. I'm happy to push this via my drm tree unless someone really wants to do it. Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org
2010-07-01drm/radeon/kms: Force HDP_NONSURF to maximum sizeJerome Glisse
HDP non surface should cover the whole VRAM but we were misscomputing the size and we endup in some case not covering the VRAM at all (if VRAM size were > 1G). Covering more than the VRAM size shouldn't be an issue. Fix : https://bugs.freedesktop.org/show_bug.cgi?id=28016 [airlied: add evergreen fix] Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: disable frac fb dividers for rs6xxAlex Deucher
Should fix fdo bug 28331: https://bugs.freedesktop.org/show_bug.cgi?id=28331 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: don't read attempt to read bios from VRAM on unposted GPU.Dave Airlie
Since the VGA switcheroo, we'd attempt to read the BIOS from VRAM on startup but on some unposted cards this can cause hangs/crashes. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28592 (further problem pointed out by agd5f on IGP systems) Reported-by: Reilithion on #radeon Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: fix typo in evergreen_gpu_initAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: return ret in cursor_set failure pathMatt Turner
We were returning 0 in both the success and failure paths. Noticed while investigating FDO bug 26403. Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/ttm: non pooled page allocation should have GFP_USER setJerome Glisse
Non pooled page allocation should have GFP_USER set so allocation can wait and reclaim page from other process (ie non atomic). Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/r100/r200: fix calculation of compressed cube mapsRoland Scheidegger
This needs similar handling to other compressed textures. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=26428 Signed-off-by: sroland@vmware.com Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/r200: handle more hw tex coord typesRoland Scheidegger
Code did not handle projected 2d and depth coordinates, meaning potentially set 3d or cube special handling might stick. (Not sure what depth coord actually does, but I guess handling it like a normal coordinate is the right thing to do.) Might be related to https://bugs.freedesktop.org/show_bug.cgi?id=26428 Signed-off-by: sroland@vmware.com Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: CS checker texture fixes for r1xx/r2xx/r3xxRoland Scheidegger
fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28459 agd5f: apply to r1xx/r2xx as well. Signed-off-by: Roland Scheidegger <sroland@vmware.com> Cc: stable@kernel.org Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon: add fake RN50 table for powerpcDave Airlie
This works well enough on a js21, but it would be nice if IBM could supply more tables for the later Power6/7 machines. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/fb: Fix video= mode computationAdam Jackson
Reduced blanking is valid only when doing CVT modes. Also, generate GTF modes unless CVT was requested; CVT devices are required to support GTF, but the reverse is not true. [airlied: fix typo] Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: fix DP after DPMS cycleAlex Deucher
The transmitter needs to be enabled before the link is trained. Reported-By: Lars Doelle <lars.doelle@on-line.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: fix dpms state on resumeCedric Godin
When suspending, we turn the display hw off, at resume the screen will stay black. This patch turn it on. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16180 Signed-off-by: Cedric Godin <cedric.godin@skynet.be> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: fix bandwidth calculation when sideport is presentAlex Deucher
Fixes fdo bug 27529: https://bugs.freedesktop.org/show_bug.cgi?id=27529 Reported-by: steckdenis@yahoo.fr Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: rtl8192u_usb: Add LG device ID 043e:7a01 Staging: rtl8192s_usb: Remove duplicate device ID Staging: rt2870: add device id for Zyxel NWD-270N Staging: comedi: fix read past end of array in cb_pcidda_attach() Staging: rtl8192su: add device ids Staging: rtl8192su: remove device ids Staging: rtl8187se: Fix compile warnings in 2.6.35-rc2 Staging: wlags49_h2: Fix build error when CONFIG_SYSFS is not set Staging: wlags49_h2: add missing <linux/string.h> for strlen Staging: hv: fix hv_utils module to properly autoload staging: hv: Fix race condition on vmbus channel initialization Staging: comedi: drivers: adl_pci9111: Fix AI commands in TRIG_FOLLOW case Staging: mrst-touchscreen: fix dereferencing free memory Staging: batman-adv: fix function prototype Staging: batman-adv: return -EFAULT on copy_to_user errors staging: usbip: usbip_common: kill rx thread on tx thread creation error.
2010-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits) USB: gadget: f_mass_storage: stale common->fsg value bug fix USB: gadget: f_mass_storage: fixed fs descriptors not being updated USB: musb: Enable the maximum supported burst mode for DMA USB: musb: fix Blackfin ulpi stubs USB: MUSB: make non-OMAP platforms build with CONFIG_PM=y USB: musb_core: make disconnect and suspend interrupts work again USB: obey the sysfs power/wakeup setting USB: gadget eth: Fix calculate CRC32 in EEM USB: qcserial: fix a memory leak in qcprobe error path USB: gadget/printer, fix sleep inside atomic USB: isp1362-hcd, fix double lock USB: serial: ftdi: correct merge conflict with CONTEC id USB: fix oops in usb_sg_init() USB: s3c2410: deactivate endpoints before gadget unbinding USB: ehci-mxc: bail out on transceiver problems USB: otg/ulpi: bail out on read errors usb: musb: Fix a bug by making suspend interrupt available in device mode USB: r8a66597: Fix failure in change of status USB: xHCI: Fix bug in link TRB activation change. USB: gadget: g_fs: possible invalid pointer reference bug fixed ...
2010-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: cpm_uart: implement the cpm_uart_early_write() function for console poll
2010-06-30Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP: hwmod: Fix the missing braces OMAP4: clock: Fix multi-omap boot with reset un-used clocks OMAP3: PM: fix IO daisy chain enable to use PM_WKEN reg omap: GPIO: fix auto-disable of debounce clock omap: DMTIMER: Ack pending interrupt always when stopping a timer omap: Stalker board: switch over to gpio_set_debounce omap: fix build failure due to missing include dma-mapping.h omap iommu: Fix Memory leak
2010-06-30Add mdr as maintainer of qla1280 driver.Jes Sorensen
As discussed with Mike Reed, add him as the maintainer of the qla1280 driver as I no longer have any hardware and he is actively looking after it. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 22:00:13 +0000