summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-02media: dm1105: Limit number of cards to avoid buffer over readAnton Vasilyev
dm1105_probe() counts number of cards at dm1105_devcount, but missed bounds check before dereference a card array. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: helene: add I2C device probe functionKatsuhiro Suzuki
This patch adds I2C probe function to use dvb_module_probe() with this driver. And also support multiple delivery systems at the same device. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dw2102: Fix memleak on sequence of probesAnton Vasilyev
Each call to dw2102_probe() allocates memory by kmemdup for structures p1100, s660, p7500 and s421, but there is no their deallocation. dvb_usb_device_init() copies the corresponding structure into dvb_usb_device->props, so there is no use of original structure after dvb_usb_device_init(). The patch moves structures from global scope to local and adds their deallocation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: headers: fix linux/mod_devicetable.h inclusionsArnd Bergmann
A couple of drivers produced build errors after the mod_devicetable.h header was split out from the platform_device one, e.g. drivers/media/platform/davinci/vpbe_osd.c:42:40: error: array type has incomplete element type 'struct platform_device_id' drivers/media/platform/davinci/vpbe_venc.c:42:40: error: array type has incomplete element type 'struct platform_device_id' This adds the inclusion where needed. Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dvb_frontend: ensure that the step is ok for both FE and tunerMauro Carvalho Chehab
The frequency step should take into account the tuner step, as, if tuner step is bigger than frontend step, the zigzag algorithm won't be doing the right thing, as it will be tuning multiple times at the same frequency. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dvb: represent min/max/step/tolerance freqs in HzMauro Carvalho Chehab
Right now, satellite frontend drivers specify frequencies in kHz, while terrestrial/cable ones specify in Hz. That's confusing for developers. However, the main problem is that universal frontends capable of handling both satellite and non-satelite delivery systems are appearing. We end by needing to hack the drivers in order to support such hybrid frontends. So, convert everything to specify frontend frequencies in Hz. Tested-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dvb: convert tuner_info frequencies to HzMauro Carvalho Chehab
Right now, satellite tuner drivers specify frequencies in kHz, while terrestrial/cable ones specify in Hz. That's confusing for developers. However, the main problem is that universal tuners capable of handling both satellite and non-satelite delivery systems are appearing. We end by needing to hack the drivers in order to support such hybrid tuners. So, convert everything to specify tuner frequencies in Hz. Plese notice that a similar patch is also needed for frontends. Tested-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Michael Büsch <m@bues.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dvb_ca_en50221: off by one in dvb_ca_en50221_io_do_ioctl()Dan Carpenter
The > should be >= so we don't read one element beyond the end of the ca->slot_info[] array. The array is allocated in dvb_ca_en50221_init(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jasmin Jessich <jasmin@anw.at> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: usbtv: use irqsave() in USB's complete callbackSebastian Andrzej Siewior
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: go7007: use irqsave() in USB's complete callbackSebastian Andrzej Siewior
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: cx231xx: use irqsave() in USB's complete callbackSebastian Andrzej Siewior
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Add support for events triggered by user controlsTodor Tomov
Changing a user control value can trigger an event to other users. Add support for that. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: doc: media/v4l-drivers: Update Qualcomm CAMSS driver document for 8x96Todor Tomov
Update the document to describe the support of Camera Subsystem on MSM8996/APQ8096. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Add support for 10-bit grayscale formatsTodor Tomov
Add support for 10-bit packed V4L2_PIX_FMT_Y10P (on 8x16 and 8x96) and unpacked V4L2_PIX_FMT_Y10 (on 8x96 only) pixel formats. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Add support for RAW MIPI14 on 8x96Todor Tomov
Add support for RAW MIPI14 format for RDI mode on 8x96. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: MIPI10 to Plain16 format conversionTodor Tomov
Use the PRDI mode on 8x96 to allow to configure RAW MIPI10 to Plain16 format conversion. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Different format support on source padTodor Tomov
Usually the format on the source pad is the same as on the sink pad. However the CSID is able to do some format conversions. To support this make the format on the source pad selectable amongst a list of formats. This list can be different for each sink pad format. This is still not used but will be when the format conversions are implemented. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Add support for UYVY output from VFE on 8x96Todor Tomov
Add support to output UYVY formats from the VFE (via the PIX interface). A configuration for the realign module in the VFE is added. As the realign module is present on 8x96 but not on 8x16, this is supported on 8x96 only. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Different format support on source padTodor Tomov
Rework the format selection on the source pad. Make the format on the source pad selectable amongst a list of formats. This list can be different for each sink pad format. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Format configuration per hardware versionTodor Tomov
As the 8x16 and 8x96 support different formats, separate the arrays which contain the supported formats. For the VFE also add separate arrays for RDI and PIX subdevices. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Add support for 8x96Todor Tomov
Add VFE hardware dependent part for 8x96. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Split to hardware dependent and independent partsTodor Tomov
This will allow to add support for different hardware. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: ispif: Add support for 8x96Todor Tomov
ISPIF hardware modules on 8x16 and 8x96 are similar. However on 8x96 the ISPIF routes data to two VFE hardware modules. Add separate interrupt handler for 8x96 to handle the additional interrupts. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Add support for 8x96Todor Tomov
CSID hardware modules on 8x16 and 8x96 are similar. There is no need to duplicate the code by adding separate versions. Just update the register macros to return the correct register addresses. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csiphy: Add support for 8x96Todor Tomov
Add CSIPHY hardware dependent part for 8x96. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csiphy: Unify lane handlingTodor Tomov
Restructure lane configuration so it is simpler and will allow similar (although not the same) handling for different hardware versions. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csiphy: Split to hardware dependent and independent partsTodor Tomov
This will allow to add support for different hardware. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> [hans.verkuil@cisco.com: remove trailing empty line] Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Add basic runtime PM supportTodor Tomov
There is a PM domain for each of the VFE hardware modules. Add support for basic runtime PM support to be able to control the PM domains. When a PM domain needs to be powered on - a device link is created. When a PM domain needs to be powered off - its device link is removed. This allows separate and independent control of the PM domains. Suspend/Resume is still not supported. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Add 8x96 resourcesTodor Tomov
Add structs with 8x96 resources. As the number of CSIPHY, CSID and VFE hardware modules is different on 8x16 and 8x96 select the number at runtime and allocate needed structures dynamically. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dt-bindings: media: qcom,camss: Add 8996 bindingsTodor Tomov
Update binding document for MSM8996. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dt-bindings: media: qcom,camss: Fix whitespacesTodor Tomov
Use tabs. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Do not disable CAMIF when clearing its statusTodor Tomov
Use "no change" value when clearing CAMIF status and make sure this is done before configuring the new command. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Get line pointer as container of video_outTodor Tomov
Simplify getting of the line pointer by using the container_of macro instead of traversing media controller links. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: vfe: Fix to_vfe() macro member nameTodor Tomov
Use the member name which is "line" instead of the pointer argument. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csid: Configure data type and decode format properlyTodor Tomov
The CSID decodes the input data stream. When the input comes from the Test Generator the format of the stream is set on the source media pad. When the input comes from the CSIPHY the format is the one on the sink media pad. Use the proper format for each case. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csiphy: Update settle count calculationTodor Tomov
Update settle count calculation as per specification. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Unify the clock namesTodor Tomov
Use more logical clock names - similar to the names in documentation. This will allow better handling of the clocks in the driver when support for more hardware versions is added - equivalent clocks on different hardware versions will have the same name. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: dt-bindings: media: qcom, camss: Unify the clock namesTodor Tomov
Use more logical clock names - similar to the names in documentation. This will allow better handling of the clocks in the driver when support for more hardware versions is added - equivalent clocks on different hardware versions will have the same name. Note: No dts is using this device (and clock names) yet. CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: csiphy: Ensure clock mux config is done before the restTodor Tomov
Add a write memory barier after clock mux config and before the rest of the csiphy config. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Fix OF node usageTodor Tomov
of_graph_get_next_endpoint increases the refcount of the returned node and decreases the refcount of the passed node. Take this into account and use of_node_put properly. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: camss: Use SPDX license headersTodor Tomov
Use SPDX license headers for all files of the Qualcomm CAMSS driver. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: Rename CAMSS driver pathTodor Tomov
Support for camera subsystem on QComm MSM8996/APQ8096 is to be added so remove hardware version from CAMSS driver's path. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: v4l: Add new 10-bit packed grayscale formatTodor Tomov
The new format will be called V4L2_PIX_FMT_Y10P. It is similar to the V4L2_PIX_FMT_SBGGR10P family formats but V4L2_PIX_FMT_Y10P is a grayscale format. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: v4l: Add new 2X8 10-bit grayscale media bus codeTodor Tomov
The code will be called MEDIA_BUS_FMT_Y10_2X8_PADHI_LE. It is similar to MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE but MEDIA_BUS_FMT_Y10_2X8_PADHI_LE describes grayscale data. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: doc-rst: Add packed Bayer raw14 pixel formatsSakari Ailus
These formats are compressed 14-bit raw bayer formats with four different pixel orders. They are similar to 10-bit variants. The formats added by this patch are V4L2_PIX_FMT_SBGGR14P V4L2_PIX_FMT_SGBRG14P V4L2_PIX_FMT_SGRBG14P V4L2_PIX_FMT_SRGGB14P Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-30media: em28xx: disable null packet filter for WinTVdualHDRobert Schlabbach
This patch disables the null packet filter for the Hauppauge WinTV-dualHD. There are applications which require the unfiltered transport stream (e.g. DOCSIS segment load analyzers). Tests showed that the device is capable of delivering two unfiltered EuroDOCSIS 3.0 transport streams simultaneously, i.e. over 100 Mbit/s worth of data, without any losses. Signed-off-by: Robert Schlabbach <Robert.Schlabbach@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-30media: dvb-frontends/tda18271c2dd: fix handling of DVB-T parametersDaniel Scheller
Add a break statement in set_params() for the SYS_DVBT(2). As reported by gcc: drivers/media/dvb-frontends/tda18271c2dd.c:1144:3: warning: this statement may fall through [-Wimplicit-fallthrough=] There is a nested switch() inside the code with sets the tuner to the right standard. Without the break, the code will always set to DVB-C mode, with can be sub-optimal for DVB-T. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-30media: ddbridge/mci: add SX8 I/Q mode remark and remove DIAG CMD definesDaniel Scheller
Take note that the SX8 IQ mode is only available on a single tuner, and remove the MCI/SX8 DIAG CMD defines. Picked up from the upstream dddvb GIT. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-30media: ddbridge/sx8: enable modulation selection in set_parameters()Daniel Scheller
Allow for tuning to transponders with specific modulations in set_parameters(). Setting a specific modulation will also enable lower modulations. Picked up from the upstream dddvb GIT. Upstream also has support for APSK64/128/256 modulations which aren't supported yet by the DVB API, so comment them out until support for them is added. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-30media: ddbridge/sx8: disable automatic PLS code searchDaniel Scheller
The SX8 cards by default do an automatic search for the PLS code. This is not necessarily wanted as this can eventually be detected wrong, so disable this. Picked up from the upstream dddvb GIT. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 00:28:31 +0000