summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-02perf tools: Work around strict aliasing related warningsIngo Molnar
Older versions of GCC are rather stupid about strict aliasing: util/trace-event-parse.c: In function 'parse_cmdlines': util/trace-event-parse.c:93: warning: dereferencing type-punned pointer will break strict-aliasing rules util/trace-event-parse.c: In function 'parse_proc_kallsyms': util/trace-event-parse.c:155: warning: dereferencing type-punned pointer will break strict-aliasing rules util/trace-event-parse.c:157: warning: dereferencing type-punned pointer will break strict-aliasing rules util/trace-event-parse.c:158: warning: dereferencing type-punned pointer will break strict-aliasing rules util/trace-event-parse.c: In function 'parse_ftrace_printk': util/trace-event-parse.c:294: warning: dereferencing type-punned pointer will break strict-aliasing rules util/trace-event-parse.c:295: warning: dereferencing type-punned pointer will break strict-aliasing rules make: *** [util/trace-event-parse.o] Error 1 Make it clear to GCC that we intend with those pointers, by passing them through via an explicit (void *) cast. We might want to add -fno-strict-aliasing as well, like the kernel itself does. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-02perf tools: Clean up warnings list in the MakefileIngo Molnar
Make it easier to turn warnings on/off by using a separate line for each warning added. Some of the warnings have too much of a nuisance factor and we might want to turn them off in the future. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31perf tools: Complete support for dynamic stringsFrederic Weisbecker
Complete support for __str_loc type strings of ftrace events which have dynamic offsets values set for each of them inside their sammples. Before: geany-5759 [000] 0.000000: lock_release: name geany-5759 [000] 0.000000: lock_release: name geany-5759 [000] 0.000000: lock_release: name kondemand/0-362 [000] 0.000000: lock_release: name pdflush-421 [000] 0.000000: lock_release: name After: geany-5759 [000] 0.000000: lock_release: &u->lock geany-5759 [000] 0.000000: lock_release: key geany-5759 [000] 0.000000: lock_release: &group->notification_mutex kondemand/0-362 [000] 0.000000: lock_release: &rq->lock pdflush-421 [000] 0.000000: lock_release: &rq->lock Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1251693921-6579-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2009-08-31perf tools: Unify swapper tasks namingFrederic Weisbecker
In perf tools, we hardcode the pid 0 cmdline resolving to "idle" because the init task is not included in the COMM events. But the idle tasks secondary cpus are resolved into their "init" name through the COMM events. We have then such strange result in perf report (ditto with trace): 19.66% init [kernel] [k] acpi_idle_enter_c1 17.32% [idle] [kernel] [k] acpi_idle_enter_c1 It's then better to unify the swapper tasks into a single init name. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1251693921-6579-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2009-08-31perf tools: Resolve idle thread cmdline for perf traceFrederic Weisbecker
The cmd-trace tool used the cmdline file and resolved the idle thread using a hardcoded check for the 0 task pid. Now we have a centralized way to do that from perf using register_idle_thread() API. Before: :0-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name :0-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name After: [idle]-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name [idle]-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1251693921-6579-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31perf tools: Librarize idle thread registrationFrederic Weisbecker
Librarize register_idle_thread() used by annotate and report. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1251693921-6579-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31perf tools: Add missing parameters documentationFrederic Weisbecker
Add missing documentation for the following parameters: - perf record -R - perf report -g Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1251682323-10395-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31Merge branch 'perfcounters/tracing' into perfcounters/coreIngo Molnar
Merge reason: this topic is ready now to merge into the main development branch for .32, with functional perf trace output. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28perf tools: do not complain if root is owning perf.dataPierre Habouzit
This improves patch fa6963b24 so that perf.data stuff that has been dumped as root can be read (annotate/report) by a user without the use of the --force. Rationale is that root has plenty of ways to screw us (usually) that do not require twisted schemes involving specially crafting a perf.data. Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> LKML-Reference: <20090827075902.GF19653@laphroaig.corp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28perf tools: Fix missing string field printing in perf traceFrederic Weisbecker
Some string fields are not printed because of a missing printf in the post-processing. Before: perf-10070 [000] 0.000000: sched_switch: task :10070 [120] (R) ==> :5720 [120] geany-5720 [000] 0.000000: sched_switch: task :5720 [120] (S) ==> :10070 [120] perf-10070 [000] 0.000000: sched_switch: task :10070 [120] (R) ==> :5720 [120] geany-5720 [000] 0.000000: sched_switch: task :5720 [120] (S) ==> :10070 [120] <idle>-0 [000] 0.000000: sched_switch: task :0 [140] (R) ==> :361 [115] After: perf-10070 [000] 0.000000: sched_switch: task perf:10070 [120] (R) ==> geany:5720 [120] geany-5720 [000] 0.000000: sched_switch: task geany:5720 [120] (S) ==> perf:10070 [120] perf-10070 [000] 0.000000: sched_switch: task perf:10070 [120] (R) ==> geany:5720 [120] geany-5720 [000] 0.000000: sched_switch: task geany:5720 [120] (S) ==> perf:10070 [120] <idle>-0 [000] 0.000000: sched_switch: task swapper:0 [140] (R) ==> kondemand/1:361 [115] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1251427567-10551-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28perf tools: Only save the event formats we needFrederic Weisbecker
While opening a trace event counter, every events are saved in the trace.info file. But we only want to save the specifications of the events we are using. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1251421798-9101-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-26perf top: Show RIP only in verbose modeArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090826145126.GA5255@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-25perf_counter: Allow sharing of output channelsPeter Zijlstra
Provide the ability to configure a counter to send its output to another (already existing) counter's output stream. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: stephane eranian <eranian@googlemail.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090819092023.980284148@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-25perf_counter: Start counting time enabled when group leader gets enabledPaul Mackerras
Currently, if a group is created where the group leader is initially disabled but a non-leader member is initially enabled, and then the leader is subsequently enabled some time later, the time_enabled for the non-leader member will reflect the whole time since it was created, not just the time since the leader was enabled. This is incorrect, because all of the members are effectively disabled while the leader is disabled, since none of the members can go on the PMU if the leader can't. Thus we have to update the ->tstamp_enabled for all the enabled group members when a group leader is enabled, so that the time_enabled computation only counts the time since the leader was enabled. Similarly, when disabling a group leader we have to update the time_enabled and time_running for all of the group members. Also, in update_counter_times, we have to treat a counter whose group leader is disabled as being disabled. Reported-by: Stephane Eranian <eranian@googlemail.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> LKML-Reference: <19091.29664.342227.445006@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-24Merge branch 'perfcounters/urgent' into perfcounters/coreIngo Molnar
Conflicts: tools/perf/builtin-annotate.c tools/perf/builtin-report.c Merge reason: resolve these conflicts. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-21perf trace: Add OPT_END to option array of perf-traceMasami Hiramatsu
Add OPT_END to option array of perf-trace for fixing a SEGV bug when showing perf-trace help message. Without this patch; ./perf trace -h usage: perf trace [<options>] <command> -D, --dump-raw-trace dump raw trace in ASCII -v, --verbose be more verbose (show symbol address, etc) -f, Segmentation fault With this patch: ./perf trace -h usage: perf trace [<options>] <command> -D, --dump-raw-trace dump raw trace in ASCII -v, --verbose be more verbose (show symbol address, etc) Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <20090821185603.11039.62109.stgit@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-21perf_counter: Fix typo in read() output generationPeter Zijlstra
When you iterate a list, using the iterator is useful. Before: ID: 5 ID: 5 ID: 5 ID: 5 EVNT: 0x40088b scale: nan ID: 5 CNT: 1006252 ID: 6 CNT: 1011090 ID: 7 CNT: 1011196 ID: 8 CNT: 1011095 EVNT: 0x40088c scale: 1.000000 ID: 5 CNT: 2003065 ID: 6 CNT: 2011671 ID: 7 CNT: 2012620 ID: 8 CNT: 2013479 EVNT: 0x40088c scale: 1.000000 ID: 5 CNT: 3002390 ID: 6 CNT: 3015996 ID: 7 CNT: 3018019 ID: 8 CNT: 3020006 EVNT: 0x40088b scale: 1.000000 ID: 5 CNT: 4002406 ID: 6 CNT: 4021120 ID: 7 CNT: 4024241 ID: 8 CNT: 4027059 After: ID: 1 ID: 2 ID: 3 ID: 4 EVNT: 0x400889 scale: nan ID: 1 CNT: 1005270 ID: 2 CNT: 1009833 ID: 3 CNT: 1010065 ID: 4 CNT: 1010088 EVNT: 0x400898 scale: nan ID: 1 CNT: 2001531 ID: 2 CNT: 2022309 ID: 3 CNT: 2022470 ID: 4 CNT: 2022627 EVNT: 0x400888 scale: 0.489467 ID: 1 CNT: 3001261 ID: 2 CNT: 3027088 ID: 3 CNT: 3027941 ID: 4 CNT: 3028762 Reported-by: stephane eranian <eranian@googlemail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey J Ashford <cjashfor@us.ibm.com> Cc: perfmon2-devel <perfmon2-devel@lists.sourceforge.net> LKML-Reference: <1250867976.7538.73.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-19perf tools: Check perf.data ownerPeter Zijlstra
Add an owner check to opening perf.data files and a switch to silence it. Because perf-report/perf-annotate are binary parsers reading another users' perf.data file could be a security risk if the file were explicitly engineered to trigger bugs in the parser (we hope of course there are non such bugs, but you never know). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090819092023.896648538@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf tools: Make 'make html' workKyle McMartin
pushd tools/perf/Documentation make html popd is failing for me... ASCIIDOC perf-annotate.html ERROR: unsafe: include file: /etc/asciidoc/./stylesheets/xhtml11.css ERROR: unsafe: include file: /etc/asciidoc/./stylesheets/xhtml11-manpage.css ERROR: unsafe: include file: /etc/asciidoc/./stylesheets/xhtml11-quirks.css make: *** [perf-annotate.html] Error 1 Apparently asciidoc "unsafe" is the default mode of operation in practice. https://bugzilla.redhat.com/show_bug.cgi?id=506953 Works tidily now. Signed-off-by: Kyle McMartin <kyle@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090818164125.GM25206@bombadil.infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf tools: Save partial non-overlapping mapFrederic Weisbecker
The librarization of the thread helpers between annotate and report lost some perf report specifics. thread__insert_map() had its most uptodate version in perf report which cared about partial map overlapping. In case of overlap between two maps, perf annotate's version removes the whole old map without considering if it partially or absolutely overlaps the new map. We exported the odd version, change it by using the perf report version. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250607843-7395-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf tools: Fix comm column adjustingFrederic Weisbecker
The librarization of the thread helpers between annotate and report lost some perf report specifics. This patch fixes the thread comm column adjusting that has been omitted during this export. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250604226-6852-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf annotate: Fix segmentation faultIngo Molnar
Linus reported this perf annotate segfault: [torvalds@nehalem git]$ perf annotate unmap_vmas Segmentation fault #0 map__clone (self=<value optimized out>) at builtin-annotate.c:236 #1 thread__fork (self=<value optimized out>) at builtin-annotate.c:372 The bug here was that builtin-annotate.c was a copy of builtin-report.c and a threading related fix to builtin-report.c didnt get propagated to builtin-annotate.c ... Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf_counter: Fix the PARISC buildIngo Molnar
PARISC does not build: /home/mingo/tip/kernel/perf_counter.c: In function 'perf_counter_index': /home/mingo/tip/kernel/perf_counter.c:2016: error: 'PERF_COUNTER_INDEX_OFFSET' undeclared (first use in this function) /home/mingo/tip/kernel/perf_counter.c:2016: error: (Each undeclared identifier is reported only once /home/mingo/tip/kernel/perf_counter.c:2016: error: for each function it appears in.) As PERF_COUNTER_INDEX_OFFSET is not defined. Now, we could define it in the architecture - but lets also provide a core default of 0 (which happens to be what all but one architecture uses at the moment). Architectures that need a different index offset should set this value in their asm/perf_counter.h files. Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf tools: Remove obsolete definesIngo Molnar
The _XOPEN_SOURCE* defines are not really needed on Linux and it's not like we'll port this to AIX ;-) The define also broke the build with gcc 4.4.1: CC util/trace-event-parse.o In file included from util/trace-event-parse.c:32: util/util.h:43:1: error: "_XOPEN_SOURCE" redefined So remove them. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18Merge branch 'master' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/perfcounters into perfcounters/core
2009-08-18perf_counter: powerpc: Add callchain supportPaul Mackerras
This adds support for tracing callchains for powerpc, both 32-bit and 64-bit, and both in the kernel and userspace, from PMU interrupt context. The first three entries stored for each callchain are the NIP (next instruction pointer), LR (link register), and the contents of the LR save area in the second stack frame (the first is ignored because the ABI convention on powerpc is that functions save their return address in their caller's stack frame). Because leaf functions don't have to save their return address (LR value) and don't have to establish a stack frame, it's possible for either or both of LR and the second stack frame's LR save area to have valid return addresses in them. This is basically impossible to disambiguate without either reading the code or looking at auxiliary information such as CFI tables. Since we don't want to do either of those things at interrupt time, we store both LR and the second stack frame's LR save area. Once we get past the second stack frame, there is no ambiguity; all return addresses we get are reliable. For kernel traces, we check whether they are valid kernel instruction addresses and store zero instead if they are not (rather than omitting them, which would make it impossible for userspace to know which was which). We also store zero instead of the second stack frame's LR save area value if it is the same as LR. For kernel traces, we check for interrupt frames, and for user traces, we check for signal frames. In each case, since we're starting a new trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace knows that the next three entries are NIP, LR and the second stack frame for the interrupted context. We read user memory with __get_user_inatomic. On 64-bit, if this PMU interrupt occurred while interrupts are soft-disabled, and there is no MMU hash table entry for the page, we will get an -EFAULT return from __get_user_inatomic even if there is a valid Linux PTE for the page, since hash_page isn't reentrant. Thus we have code here to read the Linux PTE and access the page via the kernel linear mapping. Since 64-bit doesn't use (or need) highmem there is no need to do kmap_atomic. On 32-bit, we don't do soft interrupt disabling, so this complication doesn't occur and there is no need to fall back to reading the Linux PTE, since hash_page (or the TLB miss handler) will get called automatically if necessary. Note that we cannot get PMU interrupts in the interval during context switch between switch_mm (which switches the user address space) and switch_to (which actually changes current to the new process). On 64-bit this is because interrupts are hard-disabled in switch_mm and stay hard-disabled until they are soft-enabled later, after switch_to has returned. So there is no possibility of trying to do a user stack trace when the user address space is not current's address space. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18powerpc: Allow perf_counters to access user memory at interrupt timePaul Mackerras
This provides a mechanism to allow the perf_counters code to access user memory in a PMU interrupt routine. Such an access can cause various kinds of interrupt: SLB miss, MMU hash table miss, segment table miss, or TLB miss, depending on the processor. This commit only deals with 64-bit classic/server processors, which use an MMU hash table. 32-bit processors are already able to access user memory at interrupt time. Since we don't soft-disable on 32-bit, we avoid the possibility of reentering hash_page or the TLB miss handlers, since they run with interrupts disabled. On 64-bit processors, an SLB miss interrupt on a user address will update the slb_cache and slb_cache_ptr fields in the paca. This is OK except in the case where a PMU interrupt occurs in switch_slb, which also accesses those fields. To prevent this, we hard-disable interrupts in switch_slb. Interrupts are already soft-disabled at this point, and will get hard-enabled when they get soft-enabled later. This also reworks slb_flush_and_rebolt: to avoid hard-disabling twice, and to make sure that it clears the slb_cache_ptr when called from other callers than switch_slb, the existing routine is renamed to __slb_flush_and_rebolt, which is called by switch_slb and the new version of slb_flush_and_rebolt. Similarly, switch_stab (used on POWER3 and RS64 processors) gets a hard_irq_disable() to protect the per-cpu variables used there and in ste_allocate. If a MMU hashtable miss interrupt occurs, normally we would call hash_page to look up the Linux PTE for the address and create a HPTE. However, hash_page is fairly complex and takes some locks, so to avoid the possibility of deadlock, we check the preemption count to see if we are in a (pseudo-)NMI handler, and if so, we don't call hash_page but instead treat it like a bad access that will get reported up through the exception table mechanism. An interrupt whose handler runs even though the interrupt occurred when soft-disabled (such as the PMU interrupt) is considered a pseudo-NMI handler, which should use nmi_enter()/nmi_exit() rather than irq_enter()/irq_exit(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18powerpc/32: Always order writes to halves of 64-bit PTEsPaul Mackerras
On 32-bit systems with 64-bit PTEs, the PTEs have to be written in two 32-bit halves. On SMP we write the higher-order half and then the lower-order half, with a write barrier between the two halves, but on UP there was no particular ordering of the writes to the two halves. This extends the ordering that we already do on SMP to the UP case as well. The reason is that with the perf_counter subsystem potentially accessing user memory at interrupt time to get stack traces, we have to be careful not to create an incorrect but apparently valid PTE even on UP. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-08-18perf tools: Make trace event format parser aware of cast to pointersFrederic Weisbecker
The ftrace event format parser handles the usual casts but not the cast to pointers. Such casts have been introduced recently with the module trace events and raise the following parsing error: Fatal: bad op token ) This is because it considers the "*" character as a binary operator. Make it then aware of casts to pointers. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1250543271-8383-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf tools: Record events info also when :record suffix is used.Frederic Weisbecker
You can enable a counter's PERF_SAMPLE_RAW attribute in two fashions: - using the -R option (every counters get PERF_SAMPLE_RAW) - using the :record suffix in a trace event counter name Currently we record the events info in a trace.info file from perf record when the former method is used but we omit it with the latter. Check both situations. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1250543271-8383-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf tools: Warn while running perf trace without sampleFrederic Weisbecker
When a user runs perf trace using an input with logged counters without PERF_SAMPLE_RAW attribute, warn by giving a nice tip. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1250543271-8383-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf tools: Fix spelling mistake in callchain errorFrederic Weisbecker
While running perf report -g in a perf.data file that hasn't been recorded in callchain mode, the error reported has a spelling issue: ./perf report -g selected -c but no callchain data. Did you call perf record without -g? Fix it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1250543271-8383-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17perf tools: Add perf traceFrederic Weisbecker
This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17perf tools: Add trace event information parserSteven Rostedt
Add util/trace-event-parse.c which provides the handlers to parse the ftrace events info from the stream and handles the ftrace perf samples event printing. This file is a rename of the parse-events.c file from the trace-cmd tools, written by Steven Rostedt and Josh Triplett, originated from the git tree: git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This is a perf tools integration. [ fweisbec@gmail.com: various changes for perf tools integration. ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17perf tools: Add trace event debugfs stream readerSteven Rostedt
Add util/trace-event-read.c which handles trace events informations reading. This file is a rename of the trace-read.c file from the trace-cmd tools, written by Steven Rostedt and Josh Triplett, originated from the git tree: git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This is its perf tools integration. [ fweisbec@gmail.com: various changes for perf tools integration. ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17perf tools: Add trace event debugfs IO handlerSteven Rostedt
Add util/trace-event-info.c which handles ftrace file IO from debugfs and provides general helpers to fetch/save ftrace events informations. This file is a rename of the trace-cmd.c file from the trace-cmd tools, written by Steven Rostedt and Josh Triplett, originated from the git tree: git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This is a perf tools integration. For now, ftrace events information is saved in a separate file than the standard perf.data [fweisbec@gmail.com: various changes for perf tools integration] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17perf_counter: Check task on counter read IPIPaul Mackerras
In general, code in perf_counter.c that is called through an IPI checks, for per-task counters, that the counter's task is still the current task. This is to handle the race condition where the cpu switches from the task we want to another task in the interval between sending the IPI and the IPI arriving and being handled on the target CPU. For some reason, __perf_counter_read is missing this check, yet there is no reason why the race condition can't occur. This adds a check that the current task is the one we want. If it isn't, we just return. In that case the counter->count value should be up to date, since it will have been updated when the counter was scheduled out, which must have happened since the IPI was sent. I don't have an example of an actual failure due to this race, but it seems obvious that it could occur and we need to guard against it. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19076.63614.277861.368125@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17perf: Rename perf-examples.txt to examples.txtCarlos R. Mafra
Rename it to examples.txt to avoid the perf-*.txt pattern in the Makefile, otherwise 'make doc' fails because perf-examples.txt is not formatted to be a man page: ERROR: perf-examples.txt: line 1: manpage document title is mandatory Signed-off-by: Carlos R. Mafra <crmafra@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16perf tools: Librarize trace_event() helperFrederic Weisbecker
Librarize trace_event() helper so that perf trace can use it too. Also clean up the debug.h includes a bit. It's not good to have it included in perf.h because it doesn't make it flexible against other headers it may need (headers that can also depend on perf.h and then create a recursive header dependency). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250453149-664-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16perf tools: Librarize sample type and attr finding from headersFrederic Weisbecker
Librarize the sample type and attr fetching from perf data file headers so that we can also use it from perf trace. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250448997-30715-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16perf tools: Put the show mode into the event headers filesFrederic Weisbecker
Annotate and report share the same flags to filter events considering their context (kernel, user, hypervisor). Both tools have their own definitions of these flags. Factorize them out into the event headers file. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250445414-29237-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16perf tools: Factorize the dprintf definitionFrederic Weisbecker
We have two users of dprintf: report and annotate. Another one is coming with perf trace. Then factorize it into the debug file. While at it, rename dprintf() to dump_printf() so that it doesn't conflicts with its libc homograph. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250443461-28130-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16perf tools: Substract -Wformat-nonliteral from Wformat=2 in extra flagsFrederic Weisbecker
The soon coming perf trace needs to use printf with dynamically built formats. But we are using -Wformat=2 which is a shortcut for the following set: -Wformat -Wformat-security -Wformat-y2k -Wformat-nonliteral -Wformat-nonliteral warns when it can't check formats because they are not builtin constant strings, but we want to feature dynamic formats. What we want instead is Wformat=2 minus -Wformat-nonliteral, which is what this patch does. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250437927-25490-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16perf: Build with stack-protector and with -D_FORTIFY_SOURCE=2Ingo Molnar
Up our defences a bit. Suggested-by: Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16perf: Enable more compiler warningsIngo Molnar
Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15perf tools: Factorize the thread code in a dedicated fileFrederic Weisbecker
Factorize the thread management code used by perf-annotate and perf-report in dedicated source and header files. v2: pass last_match by address so that it can actually be modified. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250245313-6995-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15Merge branch 'perfcounters/urgent' into perfcounters/coreIngo Molnar
Conflicts: kernel/perf_counter.c Merge reason: update to latest upstream (-rc6) and resolve the conflict with urgent fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15perf tools: Add some comments to the event definitionsPeter Zijlstra
Just to make it clear that these are _not_ generic event structures but do rely on the counter configuration. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey J Ashford <cjashfor@us.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> LKML-Reference: <20090813103655.334194326@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15perf record: Fix typo in pid_synthesize_comm_eventArnaldo Carvalho de Melo
We were using 'fd' locally, but there was a global 'fd' too, so when converting from open to fopen the test made against fd should be made against 'fp', but since we have that global it didnt get discovered ... Reported-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20090814182632.GF3490@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-13Linux 2.6.31-rc6Linus Torvalds
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 05:15:34 +0000