summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-26staging: vt6656: dead code remove bssdb.cMalcolm Priestley
The header will be remove later Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: dead code remove wmgr.cMalcolm Priestley
The header will removed later Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: rxtx remove dead codeMalcolm Priestley
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: wcmd remove dead codeMalcolm Priestley
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: deadcode iwctl.c/hMalcolm Priestley
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: main_usb removed dead codeMalcolm Priestley
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: dpc remove dead code.Malcolm Priestley
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: move life time macros to rxtx.hMalcolm Priestley
DEFAULT_MGN_LIFETIME_RES_64us DEFAULT_MSDU_LIFETIME_RES_64us Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: dead code remove zonetypesMalcolm Priestley
Remove vntconfiguration.dat, iocmd.h and country.h Set all channels are enabled as by rf type. mac80211 will handles zones Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6655: remove header declarations for static functionsJames A Shackleford
The functions iwctl_giwscan() and iwctl_siwscan() are only referenced within iwctl.c -- so, remove their function declarations from iwctl.h and mark these functions as static. Signed-off-by: James A Shackleford <shack@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: rxtx implement power save pollMalcolm Priestley
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: device_alloc_bufs use dev_errMalcolm Priestley
priv->dev->name is now null change to dev_err Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: vnt_mac_set_keyentry remove byLocalID checkMalcolm Priestley
This is now set in vnt_set_keys. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: change vnt_rf_set_txpowerMalcolm Priestley
Remove old eScanState code and use. priv->hw->conf.chandef.chan->hw_value to find current channel Check hw_value for bounds of vt3226d0_lo_current_table Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: move data rates to device.hMalcolm Priestley
Move all RATE_* macros to device.h Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: vRunCommand channel changesMalcolm Priestley
pDevice->hw->conf.chandef.chan->hw_value to find current channel Remove bChannelSwitch, uCurrChannel, byNewChannel and bStopDataPkt Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: int.c changesMalcolm Priestley
Remove BSSvUpdateNodeTxCounter which is not used. net_device_stats and wsats will be removed later. Change handling of ISR_BNTX to mac80211 Change handling of ISR_TBTT. Use IEEE80211_CONF_PS for WLAN_CMD_TBTT_WAKEUP disable bChannelSwitch this is yet to be done. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: change vnt_next_tbtt_wakeupMalcolm Priestley
Wake up to listen to next beacon when struct ieee80211_conf -> listen_interval == 1 Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: vRunCommand change beaconMalcolm Priestley
Remove bMgrPrepareBeaconToSend Check that vif is not null Call vnt_beacon_make and turn on TCR_AUTOBCNTX. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: enable power savingMalcolm Priestley
Convert vnt_enable_power_saving and vnt_disable_power_saving Remove mgmt->wCurrAID and use priv->current_aid We nolonger send the PSbSendNullPacket from vnt_enable_power_saving Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: vnt_update_ifs change basic ratesMalcolm Priestley
Use wBasicRate to find ofdm_rate. wBasicRate is changed to u32 to match struct ieee80211_bss_conf -> basic_rates Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: add vnt_init to bScheduleCommandMalcolm Priestley
start driver by linking vnt_init to vt6656_probe use bScheduleCommand to schedule new command WLAN_CMD_INIT_MAC80211 vResetCommandTimer is now used to initiate command timer. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: add channel bandsMalcolm Priestley
Add rates and channels according to rf type for vnt_init_bands which is a mac80211 replacement for CHvInitChannelTable. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: main_usb add functions and change ↵Malcolm Priestley
usb_driver functions Create new functions for the operations of mac80211 vnt_tx_80211 vnt_start vnt_stop vnt_add_interface vnt_remove_interface vnt_config vnt_bss_info_changed vnt_prepare_multicast vnt_configure vnt_set_key vnt_sw_scan_start vnt_sw_scan_complete vnt_get_tsf vnt_set_tsf vnt_reset_tsf Create vnt_init to call device_init_registers to get permanent mac address. This will be linked to vt6656_probe via bScheduleCommand in another patch as firmware needs to be loaded first. Modify vt6656_probe, vt6656_disconnect for mac80211 Change vt6656_suspend and vt6656_resume, nothing needs to be done here let mac80211 handle the suspend. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: add key functionsMalcolm Priestley
Create vnt_key_init_table to replace KeyvInitTable. Create vnt_set_keymode to handle key setting operations with five different modes VNT_KEY_DEFAULTKEY, VNT_KEY_GROUP_ADDRESS, VNT_KEY_ALLGROUP, VNT_KEY_GROUP and VNT_KEY_PAIRWISE. VNT_KEY_ONFLY and VNT_KEY_ONFLY_ALL are for when key latching in driver is not required. Create vnt_set_keys to handle mac80211 key cipher modes, four modes are supported WLAN_CIPHER_SUITE_WEP40, WLAN_CIPHER_SUITE_WEP104, WLAN_CIPHER_SUITE_TKIP and WLAN_CIPHER_SUITE_CCMP. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: Create tx functionsMalcolm Priestley
Create vnt_fill_txkey as mac80211 replacement for s_vFillTxKey. Create vnt_tx_packet which a merger of s_bPacketToWirelessUsb, nsDMA_tx_packet and csMgmt_xmit using mac80211 signalling. Create vnt_beacon_xmit as mac80211 replacement for csBeacon_xmit. Changing header in vnt_beacon_buffer to struct ieee80211_mgmt deleting some of old code. vnt_beacon_make is needed to make beacon for vnt_beacon_xmit. Create vnt_beacon_enable as mac80211 call to enable beacon. vnt_fill_ieee80211_rts is modified to use struct ieee80211_hdr instead of struct ethhdr and access to tx_context. In s_nsBulkOutIoCompleteWrite modify context handling Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: vt6656: mac80211 conversion: create rx function.Malcolm Priestley
Add mac80211 header and depends. Create new function vnt_rx_data to receive 80211 packets which is based on RXbBulkInProcessData and rx them into mac80211 The function also relays dbm, tsf_time(as mactime) and sets byBBPreEDRSSI and uCurrRSSI. skb is modified slightly to skb_put the maxium tail room in PIPEnsBulkInUsbRead and trim back in vnt_rx_data. dev_alloc_skb is used to reallocate the sk_buff. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: xillybus: Use devm_ API for memory allocation and DMA mappingEli Billauer
Managed device resource API replaces code that reinvents it for memory allocation, page allocation and DMA mapping. devm_add_action() is used for unwinding DMA mappings, since there is no devm_* API for dma_map_single(). A recent patch that introduces such API was rejected, mainly on the grounds that it may cause an unnecessary waste of resources. Suggested-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Eli Billauer <eli.billauer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: wlags49_h2: Fix use of skb after netif_rxHimangi Saraogi
This patch moves a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb via enqueue_to_backlog on its argument. This was found using the following semantic match. // <smpl> @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26Staging: Android: removed an unnecessary else statementKarthik Nayak
As per checkpatch warning, removed an unnecessary else statement proceeding an if statement with a return. Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26Staging: unisys Remove BROKEN from Kconfig to allow compilationKen Cox
The unisys drivers now properly check to make sure they are running on the s-Par platform before they will initialize. This was fixed in commit fcd0157ece so it is safe to allow the unisys drivers to be built. This has been tested in the same qemu environment that originally produced the panic and the kernel now runs as expected. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Ken Cox <jkc@redhat.com> Signed-off-by: Ken Cox <jkc@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26Staging: unisys: remove references to __DATE__ and __TIME__Ken Cox
The use of __DATE__ and __TIME__ is no longer allowed in the kernel so this commit removes those. They were once useful when the drivers were being built externally, but now that the drivers are in the kernel the use of the macros is redundant since the kernel already has the same information elsewhere. In addition, using these macros breaks the build if using gcc 4.9.0 Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ken Cox <jkc@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: unisys: remove unused macrosPaul Bolle
The macros CONFIG_SPAR_GUEST, GUESTDRIVERBUILD, and NOAUTOVERSION are defined in Makefiles for the Unisys SPAR driver. They are never used. Remove the lines that define these macros. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove struct s626_enc_infoH Hartley Sweeten
The only member left in this struct is the 'chan' which is the comedi channel of the encoder. Remove the struct and refactor the code to pass/use the comedi channel instead. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: tidy up s626_enc_insn_read()H Hartley Sweeten
Abosorb the s626_read_latch() helper and tidy up this function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'my_event_bits' from encoder private dataH Hartley Sweeten
This array in the encoder private data just makes the driver harder to follow. The S626_EVBITS() macro is used to initialize the member in the declaration. This macro creates a array of four values, based on the encoder channel, that are used to mask and set the private data 'counter_int_enabs' member. The values are created using the S626_OVERMASK() and S626_INDXMASK() macros using the encoder channel number. Remove the 'my_event_bits' member from the encoder private data as well as the S626_EVBITS() macro. Refactor the code to use the S626_OVERMASK() and S626_INDXMASK() macros directly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'set_mode' callback from encoder private dataH Hartley Sweeten
There are two functions used for the 'set_mode' callback. One is used for the channel 0-2 encoders and the other for the channel 3-5 encoders. Add a helper function, s626_set_mode(), that uses the encoder channel number to determine which function to call. Remove the then unnecessary 'set_mode' member and just call s626_set_mode() directly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'get_mode' callback from encoder private dataH Hartley Sweeten
There are two functions used for the 'get_mode' callback. One is used for the channel 0-2 encoders and the other for the channel 3-5 encoders. Add a helper function, s626_get_mode(), that uses the encoder channel number to determine which function to call. Remove the then unnecessary 'get_mode' member from the encoder private data. The 'get_mode' callbacks were not being used by the driver in any of the enabled code. For now block the s626_get_mode() functions with '#ifdef unused' to prevent a compiler warning. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'reset_cap_flags' callback from encoder ↵H Hartley Sweeten
private data There are two functions used for the 'reset_cap_flags' callback, One is used for the channel 0-2 encoders and the other for the channel 3-5 encoders. Refactor the two callbacks into a single s626_reset_cap_flags() function and use the encoder channel number to handle the differences. Remove the then unnecessary 'reset_cap_flags' member and just call s626_reset_cap_flags() directly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'pulse_index' callback from encoder private dataH Hartley Sweeten
There are two functions used for the 'pulse_index' callback, One is used for the channel 0-2 encoders and the other for the channel 3-5 encoders. Refactor the two callbacks into a single s626_pulse_index() function and use the encoder channel number to handle the differences. Remove the then unnecessary 'pulse_index' member and just call s626_pulse_index() drectly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'get_int_src' callback from encoder private dataH Hartley Sweeten
There are two functions used for the 'get_int_src' callback. One is used for the channel 0-2 encoders and the other for the channel 3-5 encoders. Refactor the two callbacks into a single s626_get_int_srsc() function and use the encoder channel number to handle the differences. Remove the then unnecessary 'get_int_src' member from the encoder private data. The 'get_int_src' callbacks were not being used by the driver. For now block the s626_get_int_src() function with '#ifdef unused' to prevent a compiler warning. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'set_int_src' callback from encoder private dataH Hartley Sweeten
There are two functions used for the 'set_int_src' callback, One is used for the channel 0-2 encoders and the other for the channel 3-5 encoders. Refactor the two callbacks into a single s626_set_int_src() function and use the encoder channel number to handle the differences. Remove the then unnecessary 'set_int_src' member and just call s626_set_int_src() drectly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'get_load_trig' callback from encoder private dataH Hartley Sweeten
There are two functions used for the 'get_load_trig' callback. One is used for the channel 0-2 encoders and the other for the channel 3-5 encoders. Refactor the two callbacks into a single s626_get_load_trig() function and use the encoder channel number to handle the differences. Remove the then unnecessary 'get_enable' member from the encoder private data. The 'get_load_trig' callbacks were not being used by the driver. For now block the s626_get_load_trig() function with '#ifdef unused' to prevent a compiler warning. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'set_load_trig' callback from encoder private dataH Hartley Sweeten
There are two functions used for the 'set_load_trig' callback, One is used for the channel 0-2 encoders and the other for the channel 3-5 encoders. Refactor the two callbacks into a single s626_set_load_trig() function and use the encoder channel number to handle the differences. Remove the then unnecessary 'set_load_trig' member and just call s626_set_load_trig() drectly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'get_enable' callback from encoder private dataH Hartley Sweeten
There are two functions used for the 'get_enable' callback, s626_get_enable_a() function is used for the channel 0-2 encoders and s626_get_enable_b() is used for the channel 3-5 encoders. Refactor the two callbacks into a single s626_get_enable() function and use the encoder channel number to handle the differenced. Remove the then unnecessary 'get_enable' member and just call s626_set_enable() directly. The 'get_enable' callbacks were not being used by the driver. For now block the s626_get_enable() function with '#ifdef unused' to prevent a compiler warning. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove 'set_enable' callback from encoder private dataH Hartley Sweeten
There are two functions used for the 'set_enable' callback, s626_set_enable_a() function is used for the channel 0-2 encoders and s626_set_enable_b() is used for the channel 3-5 encoders. Refactor the two callbacks into a single s626_set_enable() function and use the encoder channel number to handle the differenced. Remove the then unnecessary 'set_enable' member and just call s626_set_enable() directly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove my_latch_lsw from encoder private dataH Hartley Sweeten
This member of the encoder private data can be calculated based on the comedi channel stored in the 'chan' member of the private data. Do that instead and remove the unnecessary member. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: define S626_LP_CNTR* registers based on channel numberH Hartley Sweeten
Redefining the Counter Preload/Latch registers as a macro that calculates the register offset based on the comedi channel number. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: remove my_cr[ab] from encoder private dataH Hartley Sweeten
These members of the encoder private data can be calculated based on the comedi channel stored in the 'chan' member of the private data. Do that instead and remove the unnecessary members. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26staging: comedi: s626: add comedi "chan" number to struct s626_enc_infoH Hartley Sweeten
Add the comedi "chan" number to the encoder private data so we can then remove some of the members of the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-29 19:27:34 +0000