summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-20omap2: Add OHCI USB platform init for 2430 SDPViral Mehta
Add platform init code for OHCI USB on OMAP2430 SDP Signed-off-by: Viral Mehta <viral.mehta@lntinfotech.com> [tony@atomide.com: Updated subject to mention the board name] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20omap2: Add I2C bus 1 initialisation for 2430sdpViral Mehta
Initialize isp1301 FS USB transceiver and add I2C bus1 initialization code for OMAP2430 SDP Signed-off-by: Viral Mehta <viral.mehta@lntinfotech.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20omap1: amsdelta: defconfig updatesJanusz Krzysztofik
The patch provides the following ams_delta_defconfig updates: - explicitly select preemptable RCU, - replace outdated CONFIG_LBD and CONFIG_LSF options with CONFIG_LBDAF, - activate support for LCD contrast setting (new in 2.6.34), - turn off verbose bug reporting for smaller kernel. Created and tested against linux-2.6.34-rc3. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-14omap iommu: Reject unaligned addresses at setting page table entryHiroshi DOYU
This rejects unaligned device virtual address('da') and physical address('pa') and informs error to caller when a page table entry is set. Otherwise, a wrong address can be used by IO device. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Cc: Hari Kanigeri <h-kanigeri2@ti.com>
2010-05-14omap iommu: Exit iteration if no possibility of available areaHiroshi DOYU
Searching avaialable spaces should be stopped as soon as it turns out that there's no possibility with the rest of it. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-14omap iommu: Insert a gap page between IOVMAs against overrideHiroshi DOYU
Inserting a gap page between IOVMAs could detect an override on other IOVMA with iommu fault. This was originally suggested by Sakari Ailus and based on the work and comment by David Cohen. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Cc: David Cohen <david.cohen@nokia.com> Cc: Sakari Ailus <Sakari.Ailus@nokia.com>
2010-05-14omap iommu: Make CONFIG_OMAP_IOMMU_DEBUG selectableHiroshi DOYU
This CONFIG_OMAP_IOMMU_DEBUG option cannot be selected because it's not visible on menu. Make this option selectable. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2010-05-14omap iommu: Introduce iteration macro for iotlb entry scanHiroshi DOYU
There are some places to scan iotlb entries. This iteration macro could make these code a bit simpler with proceeding iotlb entries transparently. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Tested-by: Hari Kanigeri <h-kanigeri2@ti.com>
2010-05-14omap iommu: add TLB preservation supportKanigeri, Hari
This patch adds TLB preservation support to IOMMU module Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-14omap iommu: missing check for TLB valid entryKanigeri, Hari
Added the missing TLB valid entry setting for cam register Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-14omap iommu: support for OMAP4Kanigeri, Hari
This patch provides the iommu support for OMAP4 co-processors. Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-14omap iommu: renamed omap3-iommu to omap-iommuKanigeri, Hari
This patch includes changes to omap3-iommu.c file to make it generic for all OMAPs. Renamed omap3-iommu.c to omap-iommu.c [Hiroshi DOYU: Remove unnecessary "iommu-y" in Makefile] Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2010-05-12OMAP: GPIO: remove duplicate debugfs interfaceKevin Hilman
The generic gpiolib provides a debugfs interface to GPIOs which provides identical (but nicer looking) data as the OMAP specific one. This patch completely drops the OMAP specific interface (/debug/omap_gpio) in favor of using the generic one (/debug/gpio.) Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP3: GPIO: Removed a couple of unneeded registers from context save/restoreTero Kristo
setwkuena and setdataout are covered already by wake_en and dataout fields. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP3: GPIO: disable GPIO debounce clocks on idleKevin Hilman
Ensure GPIO debounce clocks are disabled when idle. Otherwise, clocks will prevent PER powerdomain from entering retention. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP2/3: GPIO: generalize prepare for idleKevin Hilman
Currently, the GPIO 'prepare' hook is only called when going to off-mode, while the function is called 'prepare_for_retention.' This patch renames the function to 'prepare_for_idle' and calls it for any powersate != PWRDM_POWER_ON passing in the powerstate. The hook itself is then responsible for doing various preparation based on the powerstate. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP3: GPIO: Only enable WAKEUPEN for edge detection GPIOsChunqiu Wang
According to the GPIO 'Wakeup and Interrupt' section of the TRM[1], wake-up requests can only be generated on edge transitions. Also for OMAP3, only edge GPIOs may lose interrupts when PER enters RET/OFF state, this is addressed by gpio prepare|resume idle functions [1] Section 25.5.3.1 OMAP34xx_ES3.1_TRM_V_Q Signed-off-by: Chunqiu Wang <cqwang@motorola.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP3: GPIO fixes for off-modeTero Kristo
Off mode is now using the omap2 retention fix code for scanning GPIOs during off-mode transitions. All the *non_wakeup_gpios variables are now used for off-mode transition tracking on OMAP3. This patch fixes cases where GPIO state changes are missed during off-mode. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP3: PM: Remove PER wakeup dependency on CORE.Mike Chan
We can remove this wakeup dependency since now, when GPIO2-6 are enabled for IO-pad wakeup, PER domain is gauranteed to be awake or be woken up to service. The previous dependency did not handle all corner cases. Since there was no sleep dependency between CORE and PER domains, if PER enters RET and CORE is ON, PER will not be active for GPIO handling. Signed-off-by: Mike Chan <mike@android.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP3: PM: Enable IO / IO-CHAIN wakeups for PERMike Chan
IO events can also come from GPIO modules, which reside in the PER domain. It is possible for the PER to enter RET while CORE is still in ON. If GPIO 2-6 are enabled for IO-pad wakeups, the PER domain will not wakeup in this case, unless we enable it. Signed-off-by: Mike Chan <mike@android.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP3: PM: Enable wakeup from ads7846 touchscreenRanjith Lohithakshan
This patch enables the wakeup capabilities of ads7846 touchscreen driver. ads7846 driver can now wakeup the system from suspend on OMAP3430 EVM and SDP boards. The earlier approach of enabling wakeup on the touchscreen GPIO pin during board level mux init is removed. Instead the wakeup flag in ads7846_platform_data is enabled. Based on the flag, the ads7846 driver will do an enable_irq_wake which will eventually call into the OMAP GPIO layer and will enable the wakeup capability on the GPIO pin. Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP3EVM: Update pad configuration for wakeup enabled padsRanjith Lohithakshan
OMAP3530 TRM section 7.4.4.4.2 requires OFFOUTENABLE to be set (active low) if wakeup capabilities are enabled on a pad. During OFF mode testing on OMAP3530 EVM, it was observed that the device was not residing in the OFF state. The device enters into the OFF state and immediately exits from that state as if an IO wakeup event has occured. The issue was traced down to the pad configuration of wkaeup enabled pad's. Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP3: PM: Add milliseconds interface to suspend wakeup timerAri Kauppi
Millisecond resolution is possible and there are use cases for it (automatic testing). Seconds-based interface is preserved for compatibility. Signed-off-by: Ari Kauppi <Ext-Ari.Kauppi@nokia.com> Reviewed-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12OMAP3: PRCM interrupt: only check and clear enabled PRCM IRQsKevin Hilman
While handling PRCM IRQs, mask out interrupts that are not enabled in PRM_IRQENABLE_MPU. If these are not masked out, non-enabled interrupts are caught, a WARN() is printed due to no 'handler' and the events are cleared. In addition to being noisy, this can also interfere with independent polling of this register by SR/VP code. This was noticed using SmartReflex transitions which cause the VPx_* interrupts to be handled since they are set in PRM_IRQSTATUS_MPU even but not enabled in PRM_IRQENABLE_MPU. Acked-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-10OMAP2/3: Add V4L2 DSS driver support in device.cVaibhav Hiremath
Add V4L2 DSS driver support in device.c Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-09Linux 2.6.34-rc7Linus Torvalds
2010-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O error [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O error [SCSI] scsi_debug: virtual_gb ignores sector_size [SCSI] libiscsi: regression: fix header digest errors [SCSI] fix locking around blk_abort_request() [SCSI] advansys: fix narrow board error path
2010-05-09cpuidle: Fix incorrect optimizationArjan van de Ven
commit 672917dcc78 ("cpuidle: menu governor: reduce latency on exit") added an optimization, where the analysis on the past idle period moved from the end of idle, to the beginning of the new idle. Unfortunately, this optimization had a bug where it zeroed one key variable for new use, that is needed for the analysis. The fix is simple, zero the variable after doing the work from the previous idle. During the audit of the code that found this issue, another issue was also found; the ->measured_us data structure member is never set, a local variable is always used instead. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Corrado Zoccolo <czoccolo@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-07Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: restore ability of spare drives to spin down. md/raid6: Fix raid-6 read-error correction in degraded state
2010-05-07Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix compilation after 16bit state locking changes pcmcia: order userspace suspend and resume requests pcmcia: avoid pccard_validate_cis failure in resume callpath
2010-05-07Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: blk-cgroup: Fix an RCU warning in blkiocg_create() blk-cgroup: Fix RCU correctness warning in cfq_init_queue() drbd: don't expose failed local READ to upper layers
2010-05-07Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/ttm: Remove the ttm_bo_block_reservation() function. drm/ttm: Remove some leftover debug messages. drm/radeon: async event synchronization for drmWaitVblank
2010-05-07virtio: initialize earlierStijn Tintel
Move initialization of the virtio framework before the initialization of mtd, so that block2mtd can be used on virtio-based block devices. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15644 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-07Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix RCU issues in the NFSv4 delegation code NFSv4: Fix the locking in nfs_inode_reclaim_delegation()
2010-05-07Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: sleep: init_set_sci_en_on_resume for Dell Studio 155x ACPI: fix acpi_hest_firmware_first_pci() caused oops sbshc: acpi_device_class "smbus_host_controller" too long power_meter: acpi_device_class "power_meter_resource" too long acpi_pad: "processor_aggregator" name too long PNP: don't check for conflicts with bridge windows ACPI: DMI init_set_sci_en_on_resume for multiple Lenovo ThinkPads PNPACPI: compute Address Space length rather than using _LEN ACPI: silence kmemcheck false positive
2010-05-07Merge branch 'v4l_for_2.6.34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: pxa_camera: move fifo reset direct before dma start V4L/DVB: video: testing unsigned for less than 0 V4L/DVB: mx1-camera: compile fix V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference" V4L/DVB: ngene: Workaround for stuck DiSEqC pin V4L/DVB: saa7146: fix regression of the av7110/budget-av driver V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 V4L/DVB: feature-removal: announce videotext.h removal V4L/DVB: V4L - vpfe capture - fix for kernel crash V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration V4L/DVB: saa7146: fix up bytesperline if it is an impossible value V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci V4L/DVB: omap24xxcam: potential buffer overflow
2010-05-07Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: create rcu_my_thread_group_empty() wrapper memcg: css_id() must be called under rcu_read_lock() cgroup: Check task_lock in task_subsys_state() sched: Fix an RCU warning in print_task() cgroup: Fix an RCU warning in alloc_css_id() cgroup: Fix an RCU warning in cgroup_path() KEYS: Fix an RCU warning in the reading of user keys KEYS: Fix an RCU warning
2010-05-07md: restore ability of spare drives to spin down.NeilBrown
Some time ago we stopped the clean/active metadata updates from being written to a 'spare' device in most cases so that it could spin down and say spun down. Device failure/removal etc are still recorded on spares. However commit 51d5668cb2e3fd1827a55 broke this 50% of the time, depending on whether the event count is even or odd. The change log entry said: This means that the alignment between 'odd/even' and 'clean/dirty' might take a little longer to attain, how ever the code makes no attempt to create that alignment, so it could take arbitrarily long. So when we find that clean/dirty is not aligned with odd/even, force a second metadata-update immediately. There are already cases where a second metadata-update is needed immediately (e.g. when a device fails during the metadata update). We just piggy-back on that. Reported-by: Joe Bryant <tenminjoe@yahoo.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2010-05-07md/raid6: Fix raid-6 read-error correction in degraded stateGabriele A. Trombetti
Fix: Raid-6 was not trying to correct a read-error when in singly-degraded state and was instead dropping one more device, going to doubly-degraded state. This patch fixes this behaviour. Tested-by: Janos Haar <janos.haar@netcenter.hu> Signed-off-by: Gabriele A. Trombetti <g.trombetti.lkrnl1213@logicschema.com> Reported-by: Janos Haar <janos.haar@netcenter.hu> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2010-05-07blk-cgroup: Fix an RCU warning in blkiocg_create()Li Zefan
with CONFIG_PROVE_RCU=y, a warning can be triggered: # mount -t cgroup -o blkio xxx /mnt # mkdir /mnt/subgroup ... kernel/cgroup.c:4442 invoked rcu_dereference_check() without protection! ... To fix this, we avoid caling css_depth() here, which is a bit simpler than the original code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-06Merge branches 'bugzilla-14337', 'bugzilla-14998', 'bugzilla-15407', ↵Len Brown
'bugzilla-15903' and 'misc-2.6.34' into release
2010-05-07drm/ttm: Remove the ttm_bo_block_reservation() function.Thomas Hellstrom
It's unused and buggy in its current form, since it can place a bo in the reserved state without removing it from lru lists. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-07drm/ttm: Remove some leftover debug messages.Thomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-07drm/radeon: async event synchronization for drmWaitVblankJerome Glisse
Bring radeon up to speed with the async event synchronization for drmWaitVblank. See c9a9c5e02aedc1a2815877b0268f886d2640b771 for more information. Without this patch event never get delivered to userspace client. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-06V4L/DVB: pxa_camera: move fifo reset direct before dma startStefan Herbrechtsmeier
Move the fifo reset from pxa_camera_start_capture to pxa_camera_irq direct before the dma start after an end of frame interrupt to prevent images from shifting because of old data at the begin of the frame. Signed-off-by: Stefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: video: testing unsigned for less than 0Dan Carpenter
soc_mbus_bytes_per_line() returns -EINVAL on error but we store it in an unsigned int so the test for less than zero doesn't work. I think it always returns "small" positive values so we can just cast it to int here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: mx1-camera: compile fixUwe Kleine-König
This fixes a regression of 7d58289 (mx1: prefix SOC specific defines with MX1_ and deprecate old names) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference"Bjørn Mork
Never call dvb_frontend_detach if we failed to attach a frontend. This fixes the following oops, which will be triggered by a missing stv090x module: [ 8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI) [ 8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29 [ 8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.562047] DVB: Unable to find symbol stv090x_attach() [ 8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac [ 8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core] Ref http://bugs.debian.org/575207 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: ngene: Workaround for stuck DiSEqC pinOliver Endriss
Send one DiSEqC byte to make sure that the pin is set to low level. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Reviewed-by: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06V4L/DVB: saa7146: fix regression of the av7110/budget-av driverHans Verkuil
An earlier regression fix for the mxb driver (V4L/DVB: saa7146_vv: fix regression where v4l2_device was registered too late) caused a new regression in the av7110 driver. Reverted the old fix and fixed the problem in the mxb driver instead. Tested on mxb and budget-av cards. The real problem is that the saa7146 framework has separate probe() and attach() driver callbacks which should be rolled into one. This is now done for the mxb driver, but others should do the same. Lack of hardware makes this hard to do, though. I hope to get hold of some hexium cards and then I can try to improve the framework to prevent this from happening again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 07:34:41 +0000