summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-19ice: remove redundant variable and if conditionBrett Creeley
In ice_pf_rxq_wait we are using an unnecessary local variable and also we are checking if the timeout time was reached after the loop. Get rid of the local variable and return 0 right when we get a successful result. This makes it so we can return -ETIMEDOUT if we ever exit the loop because we know the timeout time has been hit. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19ice: avoid multiple unnecessary de-references in probeBruce Allan
Add a local variable struct device *dev to avoid unnecessary de-references throughout ice_probe(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19ice: Fix issue with VF reset and multiple VFs support on PFsAkeem G Abodunrin
This patch fixes issues with VF queues being disabled, and VF netdev network carrier being lost after reset. Basically, we need to check if VF is enabled, and queue configured in reset_all_vfs flow, and disable/enable those queues appropriately whenever the function is called after Global/CORER/PFR reset/rebuild/replay. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19ice: Fix broadcast traffic in port VLAN modeMichal Swiatkowski
Set egress (Rx) pruning enable flag for VF VSI in VSI ctxt to enable prune action. To avoid seeing broadcast packet in different VLAN, pruning enable flag in VSI ctxt should be set. Write new functions (fill VSI ctx) to not repeat send ctxt code. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Remove unneeded hw_dbg printsSasha Neftin
Remove unneeded hw_dbg prints from igc_ethtool.c file. Clean up code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Fix the typo in igc_base.h header definitionSasha Neftin
Add the underline for the _IGC_BASE_H_. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Add support for the ntuple featureSasha Neftin
Copy the ntuple feature into list of user selectable features. Enable the ntuple feature. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Add support for statisticsSasha Neftin
Add support for statistics and show basic counters. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19Merge branch 'enc28j60-messaging-clean-up-and-ACPI-improvements'David S. Miller
Andy Shevchenko says: ==================== enc28j60: messaging clean up and ACPI improvements Most of the patches in the series dedicated to update messaging to use modern APIs, such as netdev, with a benefit to distinguish devices, if more than one installed on the system. Besides that, patch 1 targeting ACPI enabled systems when MAC address provided there via properties. And few clean ups are included, such as: - switching to module_spi_driver() - converting to use ether_addr_copy() API - converting to use SPDX Since v2: - cover letter is added ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Convert to use SPDX identifierAndy Shevchenko
Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Fix indentation splatsAndy Shevchenko
Fix few indentation splats. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Amend comments by fixing typos, adding periods, etcAndy Shevchenko
Amend comments in the code: - adding periods to the multi-line comments - fixing typos - capitalize first word in the sentences - etc Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Remove linux/init.hAndy Shevchenko
There is no need to include linux/init.h when at the same time we include linux/module.h. Remove redundant inclusion. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Convert printk() to netdev_printk()Andy Shevchenko
The debug prints of network operations will look better if network device name is printed. The benefit of that is a possibility to distinguish the actual hardware when more than one is installed on the system. Convert appropriate printk(KERN_DEBUG) to netdev_print(KERN_DEBUG, ndev). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Convert HW related printk() to dev_printk()Andy Shevchenko
The debug prints of hardware status and operations will look better if SPI device name is printed. The benefit of that is a possibility to distinguish the actual hardware when more than one is installed on the system. Convert appropriate printk(KERN_DEBUG) to dev_print(KERN_DEBUG, &spi->dev). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Switch to dev_<level> from pr_<level>Andy Shevchenko
Instead of using open coded printk(KERN_<LEVEL>) switch the driver to use dev_<level> macros. Note, the device name will be printed in full, which is beneficial when more than one card installed on the system. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Use ether_addr_copy() in enc28j60_set_mac_address()Andy Shevchenko
Use ether_addr_copy() instead of memcpy() to copy the mac address. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Switch to use module_spi_driver() macroAndy Shevchenko
Eliminate some boilerplate code by using module_spi_driver() instead of ->init() / ->exit(), moving the salient bits from ->init() into ->probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Drop driver name duplication from messagesAndy Shevchenko
When dev_<level>() macros are used against SPI device, the driver's name is printed as well. No need to duplicate this explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Replace dev_*(&netdev->dev, ...) with netdev_*()Andy Shevchenko
Replace open coded netdev_<level>() macros. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Remove duplicate messagingAndy Shevchenko
The ->probe() and ->remove() stages can be easily debugged with initcall_debug or function tracer. There is no need to repeat the same explicitly in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Use device_get_mac_address()Andy Shevchenko
Replace the DT-specific of_get_mac_address() function with device_get_mac_address, which works on both DT and ACPI platforms. This change makes it easier to add ACPI support. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19igc: Extend the ethtool supportingSasha Neftin
Add show and configure network flow classification (NFC) methods to the ethtool. Show the specifies Rx ntuple filters. Configures receive network flow classification option or rules. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igc: Add multiple receive queues control supportingSasha Neftin
Enable the multi queues to receive. Program the direction of packets to specified queues according to the mode selected in the MRQC register. Multiple receive queues defined by filters and RSS for 4 queues. Enable/disable RSS hashing and also to enable multiple receive queues. This patch will allow further ethtool support development. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19e1000e: Disable runtime PM on CNP+Kai-Heng Feng
There are some new e1000e devices can only be woken up from D3 one time, by plugging Ethernet cable. Subsequent cable plugging does set PME bit correctly, but it still doesn't get woken up. Since e1000e connects to the root complex directly, we rely on ACPI to wake it up. In this case, the GPE from _PRW only works once and stops working after that. Though it appears to be a platform bug, e1000e maintainers confirmed that I219 does not support D3. So disable runtime PM on CNP+ chips. We may need to disable earlier generations if this bug also hit older platforms. Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=280819 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19igb: fix various indentation issuesColin Ian King
There are some lines that have indentation issues, fix these Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19ipv6: Add icmp_echo_ignore_multicast support for ICMPv6Stephen Suryaputra
IPv4 has icmp_echo_ignore_broadcast to prevent responding to broadcast pings. IPv6 needs a similar mechanism. v1->v2: - Remove NET_IPV6_ICMP_ECHO_IGNORE_MULTICAST. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19net: macb: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19igb: Exclude device from suspend direct complete optimizationKai-Heng Feng
igb sets different WoL settings in system suspend callback and runtime suspend callback. The suspend direct complete optimization leaves igb in runtime suspended state with wrong WoL setting during system suspend. To fix this, we need to disable suspend direct complete optimization to let igb always use suspend callback to set correct WoL during system suspend. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19intel: correct return from set features callbackSerhey Popovych
According to comments in <linux/netdevice.h> we should return either >0 or -errno from ->ndo_set_features() if changing dev->features by itself. Return 1 in such places to notify netdev_update_features() about applied changes in dev->features. Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19net: pasemi: Make pasemi_mac_init_module staticYueHaibing
Fix sparse warning: drivers/net/ethernet/pasemi/pasemi_mac.c:1842:5: warning: symbol 'pasemi_mac_init_module' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tcp: free request sock directly upon TFO or syncookies errorGuillaume Nault
Since the request socket is created locally, it'd make more sense to use reqsk_free() instead of reqsk_put() in TFO and syncookies' error path. However, tcp_get_cookie_sock() may set ->rsk_refcnt before freeing the socket; tcp_conn_request() may also have non-null ->rsk_refcnt because of tcp_try_fastopen(). In both cases 'req' hasn't been exposed to the outside world and is safe to free immediately, but that'd trigger the WARN_ON_ONCE in reqsk_free(). Define __reqsk_free() for these situations where we know nobody's referencing the socket, even though ->rsk_refcnt might be non-null. Now we can consolidate the error path of tcp_get_cookie_sock() and tcp_conn_request(). Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19datagram: Make __skb_datagram_iter staticYueHaibing
Fix sparse warning: net/core/datagram.c:411:5: warning: symbol '__skb_datagram_iter' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19net: hns3: Make hclgevf_update_link_mode staticYueHaibing
Fix sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c:407:6: warning: symbol 'hclgevf_update_link_mode' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19ibmveth: Make array ibmveth_stats staticYueHaibing
Fix sparse warning: drivers/net/ethernet/ibm/ibmveth.c:96:21: warning: symbol 'ibmveth_stats' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tcp: add tcp_inet6_sk() helperEric Dumazet
TCP ipv6 fast path dereferences a pointer to get to the inet6 part of a tcp socket, but given the fixed memory placement, we can do better and avoid a possible cache line miss. This also reduces register pressure, since we let the compiler know about this memory placement. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19ibmvnic: Report actual backing device speed and duplex valuesMurilo Fossa Vicentini
The ibmvnic driver currently reports a fixed value for both speed and duplex settings regardless of the actual backing device that is being used. By adding support to the QUERY_PHYS_PARMS command defined by the PAPR+ we can query the current physical port state and report the proper values for these feilds. Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Murilo Fossa Vicentini <muvic@linux.ibm.com> Reviewed-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tipc: smooth change between replicast and broadcastHoang Le
Currently, a multicast stream may start out using replicast, because there are few destinations, and then it should ideally switch to L2/broadcast IGMP/multicast when the number of destinations grows beyond a certain limit. The opposite should happen when the number decreases below the limit. To eliminate the risk of message reordering caused by method change, a sending socket must stick to a previously selected method until it enters an idle period of 5 seconds. Means there is a 5 seconds pause in the traffic from the sender socket. If the sender never makes such a pause, the method will never change, and transmission may become very inefficient as the cluster grows. With this commit, we allow such a switch between replicast and broadcast without any need for a traffic pause. Solution is to send a dummy message with only the header, also with the SYN bit set, via broadcast or replicast. For the data message, the SYN bit is set and sending via replicast or broadcast (inverse method with dummy). Then, at receiving side any messages follow first SYN bit message (data or dummy message), they will be held in deferred queue until another pair (dummy or data message) arrived in other link. v2: reverse christmas tree declaration Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tipc: introduce new capability flag for clusterHoang Le
As a preparation for introducing a smooth switching between replicast and broadcast method for multicast message, We have to introduce a new capability flag TIPC_MCAST_RBCTL to handle this new feature. During a cluster upgrade a node can come back with this new capabilities which also must be reflected in the cluster capabilities field. The new feature is only applicable if all node in the cluster supports this new capability. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19tipc: support broadcast/replicast configurable for bc-linkHoang Le
Currently, a multicast stream uses either broadcast or replicast as transmission method, based on the ratio between number of actual destinations nodes and cluster size. However, when an L2 interface (e.g., VXLAN) provides pseudo broadcast support, this becomes very inefficient, as it blindly replicates multicast packets to all cluster/subnet nodes, irrespective of whether they host actual target sockets or not. The TIPC multicast algorithm is able to distinguish real destination nodes from other nodes, and hence provides a smarter and more efficient method for transferring multicast messages than pseudo broadcast can do. Because of this, we now make it possible for users to force the broadcast link to permanently switch to using replicast, irrespective of which capabilities the bearer provides, or pretend to provide. Conversely, we also make it possible to force the broadcast link to always use true broadcast. While maybe less useful in deployed systems, this may at least be useful for testing the broadcast algorithm in small clusters. We retain the current AUTOSELECT ability, i.e., to let the broadcast link automatically select which algorithm to use, and to switch back and forth between broadcast and replicast as the ratio between destination node number and cluster size changes. This remains the default method. Furthermore, we make it possible to configure the threshold ratio for such switches. The default ratio is now set to 10%, down from 25% in the earlier implementation. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18virtio_net: remove hcpu from virtnet_clean_affinityPeter Xu
The variable is never used. CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> CC: virtualization@lists.linux-foundation.org CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18Documentation: networking: Update netdev-FAQ regarding patchesFlorian Fainelli
Provide an explanation of what is expected with respect to sending new versions of specific patches within a patch series, as well as what happens if an earlier patch series accidentally gets merged). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18Merge branch 's390-qeth-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2019-03-18 please apply the following three patches to -net. The first two are fixes for minor race conditions in the probe code, while the third one gets dropwatch working (again). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18s390/qeth: be drop monitor friendlyJulian Wiedmann
As part of the TX completion path, qeth_release_skbs() frees the completed skbs with __skb_queue_purge(). This ends in kfree_skb(), reporting every completed skb as dropped. On the other hand when dropping an skb in .ndo_start_xmit, we end up calling consume_skb()... where we should be using kfree_skb() so that drop monitors get notified. Switch the drop/consume logic around, and also don't accumulate dropped packets in the tx_errors statistics. Fixes: dc149e3764d8 ("s390/qeth: replace open-coded skb_queue_walk()") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18s390/qeth: fix race when initializing the IP address tableJulian Wiedmann
The ucast IP table is utilized by some of the L3-specific sysfs attributes that qeth_l3_create_device_attributes() provides. So initialize the table _before_ registering the attributes. Fixes: ebccc7397e4a ("s390/qeth: add missing hash table initializations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18s390/qeth: don't erase configuration while probingJulian Wiedmann
The HW trap and VNICC configuration is exposed via sysfs, and may have already been modified when qeth_l?_probe_device() attempts to initialize them. So (1) initialize the VNICC values a little earlier, and (2) don't bother about the HW trap mode, it was already initialized before. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18mISDN: hfcpci: Test both vendor & device ID for Digium HFC4SBjorn Helgaas
The device ID alone does not uniquely identify a device. Test both the vendor and device ID to make sure we don't mistakenly think some other vendor's 0xB410 device is a Digium HFC4S. Also, instead of the bare hex ID, use the same constant (PCI_DEVICE_ID_DIGIUM_HFC4S) used in the device ID table. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18Merge branch ↵David S. Miller
'sctp-fix-ignoring-asoc_id-for-tcp-style-sockets-on-some-setsockopts' Xin Long says: ==================== sctp: fix ignoring asoc_id for tcp-style sockets on some setsockopts This is a patchset to fix ignoring asoc_id for tcp-style sockets on some setsockopts, introduced by SCTP_CURRENT_ASSOC of the patchset: [net-next,00/24] sctp: support SCTP_FUTURE/CURRENT/ALL_ASSOC (https://patchwork.ozlabs.org/cover/1031706/) As Marcelo suggested, we fix it on each setsockopt that is using SCTP_CURRENT_ASSOC one by one by adding the check: if (sctp_style(sk, TCP)) xxx.xxx_assoc_id = SCTP_FUTURE_ASSOC; so that assoc_id will be completely ingored for tcp-style socket on setsockopts, and works as SCTP_FUTURE_ASSOC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_STREAM_SCHEDULER ↵Xin Long
sockopt A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_STREAM_SCHEDULER sockopt. Fixes: 7efba10d6bd2 ("sctp: add SCTP_FUTURE_ASOC and SCTP_CURRENT_ASSOC for SCTP_STREAM_SCHEDULER sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_EVENT sockoptXin Long
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_EVENT sockopt. Fixes: d251f05e3ba2 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_EVENT sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 10:17:11 +0000