summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-23i2c: algo-bit: add support for I2C_M_STOPJean Delvare
Support for enforced STOPs will allow us to use SCCB compatible devices. Based on a preliminary patch by Wolfram Sang. Signed-off-by: Jean Delvare <jdelvare@suse.de> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23MAINTAINERS: add entry for Aspeed I2C driverBrendan Higgins
Added myself as maintainer of the Aspeed I2C driver and the associated I2C interrupt controller and added Joel Stanley and Benjamin Herrenschmidt as reviewers. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23i2c: aspeed: added slave support for Aspeed I2C driverBrendan Higgins
Added slave support for Aspeed I2C controller. Supports fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23i2c: aspeed: added driver for Aspeed I2CBrendan Higgins
Added initial master support for Aspeed I2C controller. Supports fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23i2c: aspeed: added documentation for Aspeed I2C driverBrendan Higgins
Added device tree binding documentation for Aspeed I2C busses. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23i2c: rcar: document HW incapabilitiesWolfram Sang
Add recent findings (IGNORE_NAK) and document in a bit more detail why the feature is not possible. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: emev2: Handle return value of clk_prepare_enableArvind Yadav
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: designware: introducing I2C_SLAVE definitionsLuis Oliveira
- Definitions were added to core library - A example was added to designware-core.txt Documentation that shows how the slave can be setup using DTS SLAVE related definitions were added to the core of the controller. Signed-off-by: Luis Oliveira <lolivei@synopsys.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: designware: MASTER mode as separated driverLuis Oliveira
- The functions related to I2C master mode of operation were transformed in a single driver. - Common definitions were moved to i2c-designware-core.h - The i2c-designware-core is now only a library file, the functions associated are in a source file called i2c-designware-common and are used by both i2c-designware-master and i2c-designware-slave. - To decrease noise in namespace common i2c_dw_*() functions are now using ops to keep them private. - Designware PCI driver had to be changed to match the previous ops functions implementation. Almost all of the "core" source is now part of the "master" source. The difference is the functions used by both modes and they are in the "common" source file. Signed-off-by: Luis Oliveira <lolivei@synopsys.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: designware: refactoring of the i2c-designwareLuis Oliveira
- Factor out all _master() part of code from i2c-designware-core and i2c-designware-platdrv to separate functions. - Standardize all code related with MASTER mode. - I have to take off DW_IC_INTR_TX_EMPTY from DW_IC_INTR_DEFAULT_MASK because it is master specific. The purpose of this is to prepare the controller to have is I2C MASTER flow in a separate driver. To do this first all the functions/definitions related to the MASTER flow were identified. Signed-off-by: Luis Oliveira <lolivei@synopsys.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: designware: Cleaning and comment style fixes.Luis Oliveira
The purpose of this commit is to fix some comments and styling in the existing code due to the need of reuse this code. What is being made here is: - Sorted the headers files - Corrected some comments style (capital letters, lowcase i2c) - Reverse tree in the variables declaration - Add/remove empty lines and tabs where needed - Fix of misspelled word "endianness" and "transferred" - Replaced the return variable "r" with the more standard "ret" The value of this, besides the rules of coding style, is because I will use this code after and it will make my future patch a lot bigger and complicated to review. The work here won't bring any additional work to backported fixes because is just style and reordering. Signed-off-by: Luis Oliveira <lolivei@synopsys.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: at91: Fix compilation warning.Arvind Yadav
Replace '%d' by '%zu' to fix the following type of compilation warnings: drivers/i2c/busses/i2c-at91.c:277:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=] dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len); ^ Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Tested-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: at91: Handle return value of clk_prepare_enableArvind Yadav
clk_prepare_enable() can fail here and we must check its return value. Also, add a missing clk_disable_unprepare(). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: use proper name for the R-Car SoCWolfram Sang
It is 'R-Car', not 'RCar'. No code or binding changes, only descriptive text. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: xlp9xx: Enable HWMON class probing for xlp9xxGeorge Cherian
Set I2C_CLASS_HWMON for xlp9xx to enable automatic probing of BMC devices by the ipmi-ssif driver. Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: i801: Add support for Intel Cannon LakeSrinivas Pandruvada
Added SMBUS PCI Ids for SMBUS for Cannon Lake PCH. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [jarkko.nikula@linux.intel.com: Add entries to Documentation and Kconfig. Cover Cannon Lake-H too] Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-18i2c: xgene-slimpro: include linux/io.h for memremapArnd Bergmann
The newly added support for the pcc mailbox fails to build in some configurations: drivers/i2c/busses/i2c-xgene-slimpro.c: In function 'xgene_slimpro_i2c_probe': drivers/i2c/busses/i2c-xgene-slimpro.c:516:25: error: implicit declaration of function 'memremap'; did you mean 'memcmp'? [-Werror=implicit-function-declaration] drivers/i2c/busses/i2c-xgene-slimpro.c:518:13: error: 'MEMREMAP_WB' undeclared (first use in this function) drivers/i2c/busses/i2c-xgene-slimpro.c:518:13: note: each undeclared identifier is reported only once for each function it appears in This includes the missing header file. Fixes: df5da47fe722 ("i2c: xgene-slimpro: Add ACPI support by using PCC mailbox") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hoan Tran <hotran@apm.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-15i2c: stub: fix build warning regressionWolfram Sang
Commit 6c42778780c40c ("i2c: stub: use pr_fmt") changed the DEBUG handling and caused build warnings. Revert back to the original. Fixes: 6c42778780c40c ("i2c: stub: use pr_fmt") Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02i2c: mxs: change error printing to debug for mxs_i2c_pio_wait_xfer_endMichael Thalmeier
Instead of printing errors after mxs_i2c_pio_wait_xfer_end returns with an error code just print a debug message. NAKs and timeouts can occur in this situation normally, so do not treat them as errors. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02i2c: sh_mobile: drop needless check for of_nodeWolfram Sang
After removal of platform_data support, we can simplify OF handling. of_match_device() evaluates to NULL if !CONFIG_OF or if there is no node pointer for that device, so we can remove the check for the node ptr. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02i2c: sh_mobile: remove platform_dataWolfram Sang
No platform currently upstream makes use of this platform_data anymore. The ones that did are converted to DT meanwhile. So, remove it. The old platforms likely don't have the 'clks_per_cnt' feature, otherwise it would have been implemented by now. And in the unlikely case they need to setup a different bus speed, we should rather go for a generic i2c platform data just for that. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02i2c: stub: use pr_fmtWolfram Sang
Instead of hard coding "i2c-stub:", let's use the pr_fmt mechanism to achieve the same more easily. This makes it easier to stay consistent when adding new messages. Also, remove an unneeded OOM message while we are here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02i2c: xgene-slimpro: Add ACPI support by using PCC mailboxHoan Tran
This patch adds ACPI support by using PCC mailbox communication interface. Signed-off-by: Hoan Tran <hotran@apm.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-02i2c: xgene-slimpro: Use a single function to send command messageHoan Tran
This patch refactors the code to use a single message function to send command message. Signed-off-by: Hoan Tran <hotran@apm.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: reformat core-base file headerWolfram Sang
Finally, apply modern comment rules to the file header. The old style looked very non-Linuxish and challenged my eyes for some time now. I also added my own copyright for the period of me being the maintainer. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: remove unneeded includes from coreWolfram Sang
They seem like cruft to me. I couldn't find any evidence that something included from there is actually used. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31docs: i2c: dev-interface: adapt to new filenames of the i2c coreWolfram Sang
The I2C core files were renamed, adapt the textfile to it. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: break out ACPI support into separate fileWolfram Sang
Removes some ifdeffery. Also add the new file to the relevant MAINTAINERS section. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: break out OF support into separate fileWolfram Sang
Also removes some ifdeffery. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: break out smbus support into separate fileWolfram Sang
Break out the exported SMBus functions and the emulation layer into a separate file. This also involved splitting up the tracing header into an I2C and an SMBus part. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: break out slave support into separate fileWolfram Sang
Also removes some ifdeffery. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: rename core source file to allow refactorizationWolfram Sang
The I2C core became quite huge and its monolithic structure makes maintenance hard. So, prepare to break out some functionality into separate files by renaming the source file. Note that we keep the resulting object name constant to avoid regressions. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-28Linux 4.12-rc3Linus Torvalds
2017-05-28Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC management fixes from Eduardo Valentin: - fixes to TI SoC driver, Broadcom, qoriq - small sparse warning fix on thermal core * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: broadcom: ns-thermal: default on iProc SoCs ti-soc-thermal: Fix a typo in a comment line ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build() ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build() thermal: core: make thermal_emergency_poweroff static thermal: qoriq: remove useless call for of_thermal_get_trip_points()
2017-05-27Merge tag 'tty-4.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some serial and tty fixes for 4.12-rc3. They are a bit bigger than normal, which is why I had them bake in linux-next for a few weeks and didn't send them to you for -rc2. They revert a few of the serdev patches from 4.12-rc1, and bring things back to how they were in 4.11, to try to make things a bit more stable there. Rob and Johan both agree that this is the way forward, so this isn't people squabbling over semantics. Other than that, just a few minor serial driver fixes that people have had problems with. All of these have been in linux-next for a few weeks with no reported issues" * tag 'tty-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: altera_uart: call iounmap() at driver remove serial: imx: ensure UCR3 and UFCR are setup correctly MAINTAINERS/serial: Change maintainer of jsm driver serial: enable serdev support tty/serdev: add serdev registration interface serdev: Restore serdev_device_write_buf for atomic context serial: core: fix crash in uart_suspend_port tty: fix port buffer locking tty: ehv_bytechan: clean up init error handling serial: ifx6x60: fix use-after-free on module unload serial: altera_jtaguart: adding iounmap() serial: exar: Fix stuck MSIs serial: efm32: Fix parity management in 'efm32_uart_console_get_options()' serdev: fix tty-port client deregistration Revert "tty_port: register tty ports with serdev bus" drivers/tty: 8250: only call fintek_8250_probe when doing port I/O
2017-05-27Merge tag 'powerpc-4.12-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fix running SPU programs on Cell, and a few other minor fixes. Thanks to Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas Piggin" * tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions powerpc/spufs: Fix hash faults for kernel regions powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=N powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() call selftests/powerpc: Fix TM resched DSCR test with some compilers
2017-05-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A series of fixes for X86: - The final fix for the end-of-stack issue in the unwinder - Handle non PAT systems gracefully - Prevent access to uninitiliazed memory - Move early delay calaibration after basic init - Fix Kconfig help text - Fix a cross compile issue - Unbreak older make versions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/timers: Move simple_udelay_calibration past init_hypervisor_platform x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives() x86/PAT: Fix Xorg regression on CPUs that don't support PAT x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation x86/build: Permit building with old make versions x86/unwind: Add end-of-stack check for ftrace handlers Revert "x86/entry: Fix the end of the stack for newly forked tasks" x86/boot: Use CROSS_COMPILE prefix for readelf
2017-05-27Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixlet from Thomas Gleixner: "Silence dmesg spam by making the posix cpu timer printks depend on print_fatal_signals" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-timers: Make signal printks conditional
2017-05-27Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two fixlets for RAS: - Export memory_error() so the NFIT module can utilize it - Handle memory errors in NFIT correctly" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: acpi, nfit: Fix the memory error check in nfit_handle_mce() x86/MCE: Export memory_error()
2017-05-27Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: - Synchronization of tools and kernel headers - A series of fixes for perf report addressing various failures: * Handle invalid maps proper * Plug a memory leak * Handle frames and callchain order correctly - Fixes for handling inlines and children mode * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/include: Sync kernel ABI headers with tooling headers perf tools: Put caller above callee in --children mode perf report: Do not drop last inlined frame perf report: Always honor callchain order for inlined nodes perf script: Add --inline option for debugging perf report: Fix off-by-one for non-activation frames perf report: Fix memory leak in addr2line when called by addr2inlines perf report: Don't crash on invalid maps in `-g srcline` mode
2017-05-27Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Thomas Gleixner: "A fix for a state leak which was introduced in the recent rework of futex/rtmutex interaction" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()
2017-05-27Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull kthread fix from Thomas Gleixner: "A single fix which prevents a use after free when kthread fork fails" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kthread: Fix use-after-free if kthread fork fails
2017-05-27Merge tag 'trace-v4.12-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fixes from Steven Rostedt: "There's been a few memory issues found with ftrace. One was simply a memory leak where not all was being freed that should have been in releasing a file pointer on set_graph_function. Then Thomas found that the ftrace trampolines were marked for read/write as well as execute. To shrink the possible attack surface, he added calls to set them to ro. Which also uncovered some other issues with freeing module allocated memory that had its permissions changed. Kprobes had a similar issue which is fixed and a selftest was added to trigger that issue again" * tag 'trace-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/ftrace: Make sure that ftrace trampolines are not RWX x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range() selftests/ftrace: Add a testcase for many kprobe events kprobes/x86: Fix to set RWX bits correctly before releasing trampoline ftrace: Fix memory leak in ftrace_graph_release()
2017-05-26x86/ftrace: Make sure that ftrace trampolines are not RWXThomas Gleixner
ftrace use module_alloc() to allocate trampoline pages. The mapping of module_alloc() is RWX, which makes sense as the memory is written to right after allocation. But nothing makes these pages RO after writing to them. Add proper set_memory_rw/ro() calls to protect the trampolines after modification. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705251056410.1862@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-05-26x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range()Steven Rostedt (VMware)
With function tracing starting in early bootup and having its trampoline pages being read only, a bug triggered with the following: kernel BUG at arch/x86/mm/pageattr.c:189! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.12.0-rc2-test+ #3 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 task: ffffffffb4222500 task.stack: ffffffffb4200000 RIP: 0010:change_page_attr_set_clr+0x269/0x302 RSP: 0000:ffffffffb4203c88 EFLAGS: 00010046 RAX: 0000000000000046 RBX: 0000000000000000 RCX: 00000001b6000000 RDX: ffffffffb4203d40 RSI: 0000000000000000 RDI: ffffffffb4240d60 RBP: ffffffffb4203d18 R08: 00000001b6000000 R09: 0000000000000001 R10: ffffffffb4203aa8 R11: 0000000000000003 R12: ffffffffc029b000 R13: ffffffffb4203d40 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9a639ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9a636b384000 CR3: 00000001ea21d000 CR4: 00000000000406b0 Call Trace: change_page_attr_clear+0x1f/0x21 set_memory_ro+0x1e/0x20 arch_ftrace_update_trampoline+0x207/0x21c ? ftrace_caller+0x64/0x64 ? 0xffffffffc029b000 ftrace_startup+0xf4/0x198 register_ftrace_function+0x26/0x3c function_trace_init+0x5e/0x73 tracer_init+0x1e/0x23 tracing_set_tracer+0x127/0x15a register_tracer+0x19b/0x1bc init_function_trace+0x90/0x92 early_trace_init+0x236/0x2b3 start_kernel+0x200/0x3f5 x86_64_start_reservations+0x29/0x2b x86_64_start_kernel+0x17c/0x18f secondary_startup_64+0x9f/0x9f ? secondary_startup_64+0x9f/0x9f Interrupts should not be enabled at this early in the boot process. It is also fine to leave interrupts enabled during this time as there's only one CPU running, and on_each_cpu() means to only run on the current CPU. If early_boot_irqs_disabled is set, it is safe to run cpu_flush_range() with interrupts disabled. Don't trigger a BUG_ON() in that case. Link: http://lkml.kernel.org/r/20170526093717.0be3b849@gandalf.local.home Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-05-26selftests/ftrace: Add a testcase for many kprobe eventsMasami Hiramatsu
Add a testcase to test kprobes via ftrace interface with many concurrent kprobe events. This tries to add many kprobe events (up to 256) on kernel functions. To avoid making ftrace-based kprobes (kprobes on fentry), it skips first N bytes (on x86 N=5, on ppc or arm N=4) of function entry. After that, it enables all those events, disable it, and remove it. Since the unoptimization buffer reclaiming will be delayed, after removing events, it will wait enough time. Link: http://lkml.kernel.org/r/149577388470.11702.11832460851769204511.stgit@devbox Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-05-26kprobes/x86: Fix to set RWX bits correctly before releasing trampolineMasami Hiramatsu
Fix kprobes to set(recover) RWX bits correctly on trampoline buffer before releasing it. Releasing readonly page to module_memfree() crash the kernel. Without this fix, if kprobes user register a bunch of kprobes in function body (since kprobes on function entry usually use ftrace) and unregister it, kernel hits a BUG and crash. Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devbox Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Fixes: d0381c81c2f7 ("kprobes/x86: Set kprobes pages read-only") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-05-26ftrace: Fix memory leak in ftrace_graph_release()Luis Henriques
ftrace_hash is being kfree'ed in ftrace_graph_release(), however the ->buckets field is not. This results in a memory leak that is easily captured by kmemleak: unreferenced object 0xffff880038afe000 (size 8192): comm "trace-cmd", pid 238, jiffies 4294916898 (age 9.736s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815f561e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8113964d>] __kmalloc+0x12d/0x1a0 [<ffffffff810bf6d1>] alloc_ftrace_hash+0x51/0x80 [<ffffffff810c0523>] __ftrace_graph_open.isra.39.constprop.46+0xa3/0x100 [<ffffffff810c05e8>] ftrace_graph_open+0x68/0xa0 [<ffffffff8114003d>] do_dentry_open.isra.1+0x1bd/0x2d0 [<ffffffff81140df7>] vfs_open+0x47/0x60 [<ffffffff81150f95>] path_openat+0x2a5/0x1020 [<ffffffff81152d6a>] do_filp_open+0x8a/0xf0 [<ffffffff811411df>] do_sys_open+0x12f/0x200 [<ffffffff811412ce>] SyS_open+0x1e/0x20 [<ffffffff815fa6e0>] entry_SYSCALL_64_fastpath+0x13/0x94 [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/20170525152038.7661-1-lhenriques@suse.com Cc: stable@vger.kernel.org Fixes: b9b0c831bed2 ("ftrace: Convert graph filter to use hash tables") Signed-off-by: Luis Henriques <lhenriques@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-05-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Just a few fixups to a couple of drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - ignore signals when finishing updating firmware Input: elan_i2c - clear INT before resetting controller Input: atmel_mxt_ts - add T100 as a readable object Input: edt-ft5x06 - increase allowed data range for threshold parameter
2017-05-26Merge tag 'led_fixes_for_4-12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski: "A single LED fix for 4.12-rc3. leds-pca955x driver uses only i2c_smbus API and thus it should pass I2C_FUNC_SMBUS_BYTE_DATA flag to i2c_check_functionality" * tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: Correct I2C Functionality
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-08 21:13:02 +0000