summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-12-20ASoC: Rename rt562[1|2]_vol_snd_controls to alc562[1|2]_vol_snd_controlsAxel Lin
The module desciption says this is ASoC alc5621/2/3 driver. Make the naming consistent with the reset of the code. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20Merge branch 'for-3.2' into for-3.3Mark Brown
2011-12-20ASoC: Use dai_fmt in snappercl15 machine driverAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20ASoC: Use dai_fmt in edb93xx machine driverAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alexander Sverdlin <subaparts@yandex.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20ASoC: mxs: correct 'direction' of device_prep_dma_cyclicShawn Guo
The commit 49920bc (dmaengine: add new enum dma_transfer_direction) changes the type of parameter 'direction' of device_prep_dma_cyclic from dma_data_direction to dma_transfer_direction. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20ASoC: Remove export of s3c_pcm_daiAxel Lin
We don't need to export s3c_pcm_dai after multi-component patch. Thus remove export of s3c_pcm_dai and make it static. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20ASoC: Tegra machine ASoC driver for boards using ALC5332 codecLeon Romanovsky
At this stage only Toshiba AC100/Dynabook supported. Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Andrey Danin <danindrey@mail.ru> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20ASoC: Convert uda1380 to table based DAPM and control initAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-20ASoC: Convert max9850 to table based DAPM and control initAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17ASoC: Use standard cache sync code in wm8961Mark Brown
We write the reset register with the default value so it should not be mistakenly written. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17ASoC: Convert wm8961 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17ASoC: Remove I2C ifdefs from wm8961 driverMark Brown
The driver only supports I2C so no need to conditionalise its use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17ASoC: Convert WM8960 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17ASoC: pxa: Convert e800_wm9712 to use snd_soc_register_card()Axel Lin
Use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17ASoC: pxa: Convert tosa to use snd_soc_register_card()Axel Lin
Use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17ASoC: pxa: Convert imote2 to use snd_soc_register_card()Axel Lin
Use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17ASoC: pxa: Convert e750_wm9705 to use snd_soc_register_card()Axel Lin
Use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17ASoC: pxa: Convert e740_wm9705 to use snd_soc_register_card()Axel Lin
Use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17ASoC: omap-mcbsp: Enable FIFO usage on OMAP4Peter Ujfalusi
Allow McBSP FIFO configuration from ASoC dai driver on OMAP4 platform. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17OMAP4: mcbsp: Enable FIFO usagePeter Ujfalusi
All McBSP instances on OMAP4 has 128 word long FIFO Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-17Merge branch 'topic/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into for-3.3
2011-12-16ASoC: Fix compile error in sound/soc/mid-x86/sst_platform.cJoerg Roedel
The variable ret_val is used but not declared. This causes the following compile error: sound/soc/mid-x86/sst_platform.c: In function ‘sst_platform_open’: sound/soc/mid-x86/sst_platform.c:274:2: error: ‘ret_val’ undeclared (first use in this function) sound/soc/mid-x86/sst_platform.c:274:2: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [sound/soc/mid-x86/sst_platform.o] Error 1 Fix this. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-15ASoC: Staticise mfld_msic_dailinkAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15ASoC: Fix partial cherry pick in wm8993Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15ASoC: Use core pm_runtime callbacks for fsiMark Brown
Now that the core holds a pm_runtime reference to the device while the link is active there is no need for the driver to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-15ASoC: Use core pm_runtime callbacks for siu_daiMark Brown
Now that the core holds a pm_runtime reference to the device while the link is active there is no need for the driver to do so. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14ASoC: Tune the accessory detection rates for WM8996Mark Brown
Use longer intervals when the microphone is not inserted to increase robustness against leisurely insertion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14mfd: Test for jack detection when deciding if wm8994 should suspendMark Brown
The jack detection on WM1811 is often required during system suspend, add it as another check when deciding if we should suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-14ASoC: Use standard register cache sync in wm8993Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14ASoC: Convert wm8993 to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14ASoC: Use standard snd_soc_cache_sync() for WM9090Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14ASoC: Remove cache default for volatile wm9081 reset registerMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14ASoC: Staticise sst_pcm_new and sst_soc_platform_drvAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by Vinod Koul <vinod.koul@linux.intel.com> Acked-by: Lu Guanqun <guanqun.lu@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14ASoC: Remove unused extern declarations for sh4_hac_dai and sh7760_soc_platformAxel Lin
Both sh4_hac_dai and sh7760_soc_platform are changed to static by multi-component patch and they are not used in sh7760-ac97.c now. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-14ASoC: Complete initialisation before registering Samsung PCM DAIMark Brown
Otherwise there's a race where the DAI might get used without everything having been set up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2011-12-14ASoC: Staticise asoc_idma_platformMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2011-12-14ASoC: Fix wm8995 regmap usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13ASoC: Rename ALC5632 MICBIAS to common name convention.Leon Romanovsky
Signed-off-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13Merge branch 'topic/cache' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into for-3.3
2011-12-13regmap: Move initialization of regcache related fields to regcache_initLars-Peter Clausen
Move the initialization regcache related fields of the regmap struct to regcache_init. This allows us to keep regmap and regcache code better separated. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13ASoC: Staticise alchemy_pcm_soc_platformAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13ASoC: Staticise au1xpsc_soc_platformAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13ASoC: Staticise rx51_aux_devAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13ASoC: Remove rbtree register cacheMark Brown
All users now use regmap directly so delete the ASoC version of the code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13ASoC: Remove WM8994 register cacheMark Brown
Now that the mfd is using the register map cache there's no need for the CODEC driver to do any register cache management or any funny dances to interact with the other drivers using the device so just remove the cache initialisation and volatility information. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13ASoC: Remove ASoC-specific WM8994 I/O codeMark Brown
Just go directly to the regmap API, saving code and making integration that bit more direct. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-13Merge branch 'mfd/wm8994' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into for-3.3
2011-12-13mfd: Convert wm8994 to use generic regmap irq_chipMark Brown
Factor out the irq_chip implementation, substantially reducing the code size for the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-13Merge branch 'topic/irq' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into wm8994-mfd
2011-12-13mfd: Mark WM1811 GPIO6 register volatile for later revisionsMark Brown
For later chip revisions the WM1811 GPIO6 register is always volatile so store the device revision when initialising the driver and then check at runtime if we're running on a newer device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 22:17:20 +0000