summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-14kernel/watchdog: fix watchdog_allowed_mask not used warningSantosh Sivaraj
Define watchdog_allowed_mask only when SOFTLOCKUP_DETECTOR is enabled. Fixes: 7feeb9cd4f5b ("watchdog/sysctl: Clean up sysctl variable name space") Signed-off-by: Santosh Sivaraj <santosh@fossix.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20201106015025.1281561-1-santosh@fossix.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14reboot: fix overflow parsing reboot cpu numberMatteo Croce
Limit the CPU number to num_possible_cpus(), because setting it to a value lower than INT_MAX but higher than NR_CPUS produces the following error on reboot and shutdown: BUG: unable to handle page fault for address: ffffffff90ab1bb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:migrate_to_reboot_cpu+0xe/0x60 Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c RSP: 0018:ffffc90000013e08 EFLAGS: 00010246 RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000 RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0 RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __do_sys_reboot.cold+0x34/0x5b do_syscall_64+0x2d/0x40 Fixes: 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fabian Frederick <fabf@skynet.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kees Cook <keescook@chromium.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Robin Holt <robinmholt@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201103214025.116799-3-mcroce@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"Matteo Croce
Patch series "fix parsing of reboot= cmdline", v3. The parsing of the reboot= cmdline has two major errors: - a missing bound check can crash the system on reboot - parsing of the cpu number only works if specified last Fix both. This patch (of 2): This reverts commit 616feab753972b97. kstrtoint() and simple_strtoul() have a subtle difference which makes them non interchangeable: if a non digit character is found amid the parsing, the former will return an error, while the latter will just stop parsing, e.g. simple_strtoul("123xyx") = 123. The kernel cmdline reboot= argument allows to specify the CPU used for rebooting, with the syntax `s####` among the other flags, e.g. "reboot=warm,s31,force", so if this flag is not the last given, it's silently ignored as well as the subsequent ones. Fixes: 616feab75397 ("kernel/reboot.c: convert simple_strtoul to kstrtoint") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Petr Mladek <pmladek@suse.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mike Rapoport <rppt@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Robin Holt <robinmholt@gmail.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201103214025.116799-2-mcroce@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14compiler.h: fix barrier_data() on clangArvind Sankar
Commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") neglected to copy barrier_data() from compiler-gcc.h into compiler-clang.h. The definition in compiler-gcc.h was really to work around clang's more aggressive optimization, so this broke barrier_data() on clang, and consequently memzero_explicit() as well. For example, this results in at least the memzero_explicit() call in lib/crypto/sha256.c:sha256_transform() being optimized away by clang. Fix this by moving the definition of barrier_data() into compiler.h. Also move the gcc/clang definition of barrier() into compiler.h, __memory_barrier() is icc-specific (and barrier() is already defined using it in compiler-intel.h) and doesn't belong in compiler.h. [rdunlap@infradead.org: fix ALPHA builds when SMP is not enabled] Link: https://lkml.kernel.org/r/20201101231835.4589-1-rdunlap@infradead.org Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201014212631.207844-1-nivedita@alum.mit.edu Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14mm/gup: use unpin_user_pages() in __gup_longterm_locked()Jason Gunthorpe
When FOLL_PIN is passed to __get_user_pages() the page list must be put back using unpin_user_pages() otherwise the page pin reference persists in a corrupted state. There are two places in the unwind of __gup_longterm_locked() that put the pages back without checking. Normally on error this function would return the partial page list making this the caller's responsibility, but in these two cases the caller is not allowed to see these pages at all. Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages") Reported-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/0-v2-3ae7d9d162e2+2a7-gup_cma_fix_jgg@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14mm/slub: fix panic in slab_alloc_node()Laurent Dufour
While doing memory hot-unplug operation on a PowerPC VM running 1024 CPUs with 11TB of ram, I hit the following panic: BUG: Kernel NULL pointer dereference on read at 0x00000007 Faulting instruction address: 0xc000000000456048 Oops: Kernel access of bad area, sig: 11 [#2] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS= 2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp CPU: 160 PID: 1 Comm: systemd Tainted: G D 5.9.0 #1 NIP: c000000000456048 LR: c000000000455fd4 CTR: c00000000047b350 REGS: c00006028d1b77a0 TRAP: 0300 Tainted: G D (5.9.0) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24004228 XER: 00000000 CFAR: c00000000000f1b0 DAR: 0000000000000007 DSISR: 40000000 IRQMASK: 0 GPR00: c000000000455fd4 c00006028d1b7a30 c000000001bec800 0000000000000000 GPR04: 0000000000000dc0 0000000000000000 00000000000374ef c00007c53df99320 GPR08: 000007c53c980000 0000000000000000 000007c53c980000 0000000000000000 GPR12: 0000000000004400 c00000001e8e4400 0000000000000000 0000000000000f6a GPR16: 0000000000000000 c000000001c25930 c000000001d62528 00000000000000c1 GPR20: c000000001d62538 c00006be469e9000 0000000fffffffe0 c0000000003c0ff8 GPR24: 0000000000000018 0000000000000000 0000000000000dc0 0000000000000000 GPR28: c00007c513755700 c000000001c236a4 c00007bc4001f800 0000000000000001 NIP [c000000000456048] __kmalloc_node+0x108/0x790 LR [c000000000455fd4] __kmalloc_node+0x94/0x790 Call Trace: kvmalloc_node+0x58/0x110 mem_cgroup_css_online+0x10c/0x270 online_css+0x48/0xd0 cgroup_apply_control_enable+0x2c4/0x470 cgroup_mkdir+0x408/0x5f0 kernfs_iop_mkdir+0x90/0x100 vfs_mkdir+0x138/0x250 do_mkdirat+0x154/0x1c0 system_call_exception+0xf8/0x200 system_call_common+0xf0/0x27c Instruction dump: e93e0000 e90d0030 39290008 7cc9402a e94d0030 e93e0000 7ce95214 7f89502a 2fbc0000 419e0018 41920230 e9270010 <89290007> 7f994800 419e0220 7ee6bb78 This pointing to the following code: mm/slub.c:2851 if (unlikely(!object || !node_match(page, node))) { c000000000456038: 00 00 bc 2f cmpdi cr7,r28,0 c00000000045603c: 18 00 9e 41 beq cr7,c000000000456054 <__kmalloc_node+0x114> node_match(): mm/slub.c:2491 if (node != NUMA_NO_NODE && page_to_nid(page) != node) c000000000456040: 30 02 92 41 beq cr4,c000000000456270 <__kmalloc_node+0x330> page_to_nid(): include/linux/mm.h:1294 c000000000456044: 10 00 27 e9 ld r9,16(r7) c000000000456048: 07 00 29 89 lbz r9,7(r9) <<<< r9 = NULL node_match(): mm/slub.c:2491 c00000000045604c: 00 48 99 7f cmpw cr7,r25,r9 c000000000456050: 20 02 9e 41 beq cr7,c000000000456270 <__kmalloc_node+0x330> The panic occurred in slab_alloc_node() when checking for the page's node: object = c->freelist; page = c->page; if (unlikely(!object || !node_match(page, node))) { object = __slab_alloc(s, gfpflags, node, addr, c); stat(s, ALLOC_SLOWPATH); The issue is that object is not NULL while page is NULL which is odd but may happen if the cache flush happened after loading object but before loading page. Thus checking for the page pointer is required too. The cache flush is done through an inter processor interrupt when a piece of memory is off-lined. That interrupt is triggered when a memory hot-unplug operation is initiated and offline_pages() is calling the slub's MEM_GOING_OFFLINE callback slab_mem_going_offline_callback() which is calling flush_cpu_slab(). If that interrupt is caught between the reading of c->freelist and the reading of c->page, this could lead to such a situation. That situation is expected and the later call to this_cpu_cmpxchg_double() will detect the change to c->freelist and redo the whole operation. In commit 6159d0f5c03e ("mm/slub.c: page is always non-NULL in node_match()") check on the page pointer has been removed assuming that page is always valid when it is called. It happens that this is not true in that particular case, so check for page before calling node_match() here. Fixes: 6159d0f5c03e ("mm/slub.c: page is always non-NULL in node_match()") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Christoph Lameter <cl@linux.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201027190406.33283-1-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14mailmap: fix entry for Dmitry Baryshkov/Eremin-SolenikovDmitry Baryshkov
Change back surname to new (old) one. Dmitry Baryshkov -> Dmitry Eremin-Solenikov -> Dmitry Baryshkov. Map several odd entries to main identity. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20201103005158.1181426-1-dmitry.baryshkov@linaro.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bitNicholas Piggin
Previously the negated unsigned long would be cast back to signed long which would have the correct negative value. After commit 730ec8c01a2b ("mm/vmscan.c: change prototype for shrink_page_list"), the large unsigned int converts to a large positive signed long. Symptoms include CMA allocations hanging forever holding the cma_mutex due to alloc_contig_range->...->isolate_migratepages_block waiting forever in "while (unlikely(too_many_isolated(pgdat)))". [akpm@linux-foundation.org: fix -stat.nr_lazyfree_fail as well, per Michal] Fixes: 730ec8c01a2b ("mm/vmscan.c: change prototype for shrink_page_list") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vaneet Narang <v.narang@samsung.com> Cc: Maninder Singh <maninder1.s@samsung.com> Cc: Amit Sahrawat <a.sahrawat@samsung.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201029032320.1448441-1-npiggin@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14mm/compaction: stop isolation if too many pages are isolated and we have ↵Zi Yan
pages to migrate In isolate_migratepages_block, if we have too many isolated pages and nr_migratepages is not zero, we should try to migrate what we have without wasting time on isolating. In theory it's possible that multiple parallel compactions will cause too_many_isolated() to become true even if each has isolated less than COMPACT_CLUSTER_MAX, and loop forever in the while loop. Bailing immediately prevents that. [vbabka@suse.cz: changelog addition] Fixes: 1da2f328fa64 (“mm,thp,compaction,cma: allow THP migration for CMA allocations”) Suggested-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Yang Shi <shy828301@gmail.com> Link: https://lkml.kernel.org/r/20201030183809.3616803-2-zi.yan@sent.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14mm/compaction: count pages and stop correctly during page isolationZi Yan
In isolate_migratepages_block, when cc->alloc_contig is true, we are able to isolate compound pages. But nr_migratepages and nr_isolated did not count compound pages correctly, causing us to isolate more pages than we thought. So count compound pages as the number of base pages they contain. Otherwise, we might be trapped in too_many_isolated while loop, since the actual isolated pages can go up to COMPACT_CLUSTER_MAX*512=16384, where COMPACT_CLUSTER_MAX is 32, since we stop isolation after cc->nr_migratepages reaches to COMPACT_CLUSTER_MAX. In addition, after we fix the issue above, cc->nr_migratepages could never be equal to COMPACT_CLUSTER_MAX if compound pages are isolated, thus page isolation could not stop as we intended. Change the isolation stop condition to '>='. The issue can be triggered as follows: In a system with 16GB memory and an 8GB CMA region reserved by hugetlb_cma, if we first allocate 10GB THPs and mlock them (so some THPs are allocated in the CMA region and mlocked), reserving 6 1GB hugetlb pages via /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages will get stuck (looping in too_many_isolated function) until we kill either task. With the patch applied, oom will kill the application with 10GB THPs and let hugetlb page reservation finish. [ziy@nvidia.com: v3] Link: https://lkml.kernel.org/r/20201030183809.3616803-1-zi.yan@sent.com Fixes: 1da2f328fa64 ("cmm,thp,compaction,cma: allow THP migration for CMA allocations") Signed-off-by: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Yang Shi <shy828301@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@surriel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201029200435.3386066-1-zi.yan@sent.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-14drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhereLyude Paul
It turns out that I forgot to go through and make sure that I converted all encoder callbacks to use atomic_enable/atomic_disable(), so let's go and actually do that. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Fixes: 09838c4efe9a ("drm/nouveau/kms: Search for encoders' connectors properly") Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-11-14drm/nouveau/ttm: avoid using nouveau_drm.ttm.type_vram prior to nv50Ben Skeggs
Pre-NV50 chipsets don't currently use the MMU subsystem that later chipsets use, and type_vram is negative here, leading to an OOB memory access. This was previously guarded by a chipset check, restore that. Reported-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 5839172f0980 ("drm/nouveau: explicitly specify caching to use") Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-11-14drm/nouveau/kms: Fix NULL pointer dereference in nouveau_connector_detect_depthAlexander Kapshuk
This oops manifests itself on the following hardware: 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 103M] (rev a1) Oct 09 14:17:46 lp-sasha kernel: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: #PF: supervisor read access in kernel mode Oct 09 14:17:46 lp-sasha kernel: #PF: error_code(0x0000) - not-present page Oct 09 14:17:46 lp-sasha kernel: PGD 0 P4D 0 Oct 09 14:17:46 lp-sasha kernel: Oops: 0000 [#1] SMP PTI Oct 09 14:17:46 lp-sasha kernel: CPU: 1 PID: 191 Comm: systemd-udevd Not tainted 5.9.0-rc8-next-20201009 #38 Oct 09 14:17:46 lp-sasha kernel: Hardware name: Hewlett-Packard Compaq Presario CQ61 Notebook PC/306A, BIOS F.03 03/23/2009 Oct 09 14:17:46 lp-sasha kernel: RIP: 0010:nouveau_connector_detect_depth+0x71/0xc0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75 Oct 09 14:17:46 lp-sasha kernel: RSP: 0018:ffffc9000028f8c0 EFLAGS: 00010297 Oct 09 14:17:46 lp-sasha kernel: RAX: 0000000000014c08 RBX: ffff8880369d4000 RCX: ffff8880369d3000 Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: ffff8880369d4000 Oct 09 14:17:46 lp-sasha kernel: RBP: ffff88800601cc00 R08: ffff8880051da298 R09: ffffffff8226201a Oct 09 14:17:46 lp-sasha kernel: R10: ffff88800469aa80 R11: ffff888004c84ff8 R12: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: R13: ffff8880051da000 R14: 0000000000002000 R15: 0000000000000003 Oct 09 14:17:46 lp-sasha kernel: FS: 00007fd0192b3440(0000) GS:ffff8880bc900000(0000) knlGS:0000000000000000 Oct 09 14:17:46 lp-sasha kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 CR3: 0000000004976000 CR4: 00000000000006e0 Oct 09 14:17:46 lp-sasha kernel: Call Trace: Oct 09 14:17:46 lp-sasha kernel: nouveau_connector_get_modes+0x1e6/0x240 [nouveau] Oct 09 14:17:46 lp-sasha kernel: ? kfree+0xb9/0x240 Oct 09 14:17:46 lp-sasha kernel: ? drm_connector_list_iter_next+0x7c/0xa0 Oct 09 14:17:46 lp-sasha kernel: drm_helper_probe_single_connector_modes+0x1ba/0x7c0 Oct 09 14:17:46 lp-sasha kernel: drm_client_modeset_probe+0x27e/0x1360 Oct 09 14:17:46 lp-sasha kernel: ? nvif_object_sclass_put+0xc/0x20 [nouveau] Oct 09 14:17:46 lp-sasha kernel: ? nouveau_cli_init+0x3cc/0x440 [nouveau] Oct 09 14:17:46 lp-sasha kernel: ? ktime_get_mono_fast_ns+0x49/0xa0 Oct 09 14:17:46 lp-sasha kernel: ? nouveau_drm_open+0x4e/0x180 [nouveau] Oct 09 14:17:46 lp-sasha kernel: __drm_fb_helper_initial_config_and_unlock+0x3f/0x4a0 Oct 09 14:17:46 lp-sasha kernel: ? drm_file_alloc+0x18f/0x260 Oct 09 14:17:46 lp-sasha kernel: ? mutex_lock+0x9/0x40 Oct 09 14:17:46 lp-sasha kernel: ? drm_client_init+0x110/0x160 Oct 09 14:17:46 lp-sasha kernel: nouveau_fbcon_init+0x14d/0x1c0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: nouveau_drm_device_init+0x1c0/0x880 [nouveau] Oct 09 14:17:46 lp-sasha kernel: nouveau_drm_probe+0x11a/0x1e0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: pci_device_probe+0xcd/0x140 Oct 09 14:17:46 lp-sasha kernel: really_probe+0xd8/0x400 Oct 09 14:17:46 lp-sasha kernel: driver_probe_device+0x4a/0xa0 Oct 09 14:17:46 lp-sasha kernel: device_driver_attach+0x9c/0xc0 Oct 09 14:17:46 lp-sasha kernel: __driver_attach+0x6f/0x100 Oct 09 14:17:46 lp-sasha kernel: ? device_driver_attach+0xc0/0xc0 Oct 09 14:17:46 lp-sasha kernel: bus_for_each_dev+0x75/0xc0 Oct 09 14:17:46 lp-sasha kernel: bus_add_driver+0x106/0x1c0 Oct 09 14:17:46 lp-sasha kernel: driver_register+0x86/0xe0 Oct 09 14:17:46 lp-sasha kernel: ? 0xffffffffa044e000 Oct 09 14:17:46 lp-sasha kernel: do_one_initcall+0x48/0x1e0 Oct 09 14:17:46 lp-sasha kernel: ? _cond_resched+0x11/0x60 Oct 09 14:17:46 lp-sasha kernel: ? kmem_cache_alloc_trace+0x19c/0x1e0 Oct 09 14:17:46 lp-sasha kernel: do_init_module+0x57/0x220 Oct 09 14:17:46 lp-sasha kernel: __do_sys_finit_module+0xa0/0xe0 Oct 09 14:17:46 lp-sasha kernel: do_syscall_64+0x33/0x40 Oct 09 14:17:46 lp-sasha kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Oct 09 14:17:46 lp-sasha kernel: RIP: 0033:0x7fd01a060d5d Oct 09 14:17:46 lp-sasha kernel: Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 70 0c 00 f7 d8 64 89 01 48 Oct 09 14:17:46 lp-sasha kernel: RSP: 002b:00007ffc8ad38a98 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 Oct 09 14:17:46 lp-sasha kernel: RAX: ffffffffffffffda RBX: 0000563f6e7fd530 RCX: 00007fd01a060d5d Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000000 RSI: 00007fd01a19f95d RDI: 000000000000000f Oct 09 14:17:46 lp-sasha kernel: RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000007 Oct 09 14:17:46 lp-sasha kernel: R10: 000000000000000f R11: 0000000000000246 R12: 00007fd01a19f95d Oct 09 14:17:46 lp-sasha kernel: R13: 0000000000000000 R14: 0000563f6e7fbc10 R15: 0000563f6e7fd530 Oct 09 14:17:46 lp-sasha kernel: Modules linked in: nouveau(+) ttm xt_string xt_mark xt_LOG vgem v4l2_dv_timings uvcvideo ulpi udf ts_kmp ts_fsm ts_bm snd_aloop sil164 qat_dh895xccvf nf_nat_sip nf_nat_irc nf_nat_ftp nf_nat nf_log_ipv6 nf_log_ipv4 nf_log_common ltc2990 lcd intel_qat input_leds i2c_mux gspca_main videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc drivetemp cuse fuse crc_itu_t coretemp ch7006 ath5k ath algif_hash Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: ---[ end trace 0ddafe218ad30017 ]--- Oct 09 14:17:46 lp-sasha kernel: RIP: 0010:nouveau_connector_detect_depth+0x71/0xc0 [nouveau] Oct 09 14:17:46 lp-sasha kernel: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75 Oct 09 14:17:46 lp-sasha kernel: RSP: 0018:ffffc9000028f8c0 EFLAGS: 00010297 Oct 09 14:17:46 lp-sasha kernel: RAX: 0000000000014c08 RBX: ffff8880369d4000 RCX: ffff8880369d3000 Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: ffff8880369d4000 Oct 09 14:17:46 lp-sasha kernel: RBP: ffff88800601cc00 R08: ffff8880051da298 R09: ffffffff8226201a Oct 09 14:17:46 lp-sasha kernel: R10: ffff88800469aa80 R11: ffff888004c84ff8 R12: 0000000000000000 Oct 09 14:17:46 lp-sasha kernel: R13: ffff8880051da000 R14: 0000000000002000 R15: 0000000000000003 Oct 09 14:17:46 lp-sasha kernel: FS: 00007fd0192b3440(0000) GS:ffff8880bc900000(0000) knlGS:0000000000000000 Oct 09 14:17:46 lp-sasha kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 CR3: 0000000004976000 CR4: 00000000000006e0 The disassembly: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75 All code ======== 0: 0a 00 or (%rax),%al 2: 00 48 8b add %cl,-0x75(%rax) 5: 49 rex.WB 6: 48 c7 87 b8 00 00 00 movq $0x6,0xb8(%rdi) d: 06 00 00 00 11: 80 b9 4d 0a 00 00 00 cmpb $0x0,0xa4d(%rcx) 18: 75 1e jne 0x38 1a: 83 fa 41 cmp $0x41,%edx 1d: 75 05 jne 0x24 1f: 48 85 c0 test %rax,%rax 22: 75 29 jne 0x4d 24: 8b 81 10 0d 00 00 mov 0xd10(%rcx),%eax 2a:* 39 06 cmp %eax,(%rsi) <-- trapping instruction 2c: 7c 25 jl 0x53 2e: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx) 35: 75 b7 jne 0xffffffffffffffee 37: c3 retq 38: 80 b9 0c 0d 00 00 00 cmpb $0x0,0xd0c(%rcx) 3f: 75 .byte 0x75 Code starting with the faulting instruction =========================================== 0: 39 06 cmp %eax,(%rsi) 2: 7c 25 jl 0x29 4: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx) b: 75 b7 jne 0xffffffffffffffc4 d: c3 retq e: 80 b9 0c 0d 00 00 00 cmpb $0x0,0xd0c(%rcx) 15: 75 .byte 0x75 objdump -SF --disassemble=nouveau_connector_detect_depth [...] if (nv_connector->edid && c85e1: 83 fa 41 cmp $0x41,%edx c85e4: 75 05 jne c85eb <nouveau_connector_detect_depth+0x6b> (File Offset: 0xc866b) c85e6: 48 85 c0 test %rax,%rax c85e9: 75 29 jne c8614 <nouveau_connector_detect_depth+0x94> (File Offset: 0xc8694) nv_connector->type == DCB_CONNECTOR_LVDS_SPWG) duallink = ((u8 *)nv_connector->edid)[121] == 2; else duallink = mode->clock >= bios->fp.duallink_transition_clk; if ((!duallink && (bios->fp.strapless_is_24bit & 1)) || c85eb: 8b 81 10 0d 00 00 mov 0xd10(%rcx),%eax c85f1: 39 06 cmp %eax,(%rsi) c85f3: 7c 25 jl c861a <nouveau_connector_detect_depth+0x9a> (File Offset: 0xc869a) ( duallink && (bios->fp.strapless_is_24bit & 2))) c85f5: f6 81 14 0d 00 00 02 testb $0x2,0xd14(%rcx) c85fc: 75 b7 jne c85b5 <nouveau_connector_detect_depth+0x35> (File Offset: 0xc8635) connector->display_info.bpc = 8; [...] % scripts/faddr2line /lib/modules/5.9.0-rc8-next-20201009/kernel/drivers/gpu/drm/nouveau/nouveau.ko nouveau_connector_detect_depth+0x71/0xc0 nouveau_connector_detect_depth+0x71/0xc0: nouveau_connector_detect_depth at /home/sasha/linux-next/drivers/gpu/drm/nouveau/nouveau_connector.c:891 It is actually line 889. See the disassembly below. 889 duallink = mode->clock >= bios->fp.duallink_transition_clk; The NULL pointer being dereferenced is mode. Git bisect has identified the following commit as bad: f28e32d3906e drm/nouveau/kms: Don't change EDID when it hasn't actually changed Here is the chain of events that causes the oops. On entry to nouveau_connector_detect_lvds, edid is set to NULL. The call to nouveau_connector_detect sets nv_connector->edid to valid memory, with status set to connector_status_connected and the flow of execution branching to the out label. The subsequent call to nouveau_connector_set_edid erronously clears nv_connector->edid, via the local edid pointer which remains set to NULL. Fix this by setting edid to the value of the just acquired nv_connector->edid and executing the body of nouveau_connector_set_edid only if nv_connector->edid and edid point to different memory addresses thus preventing nv_connector->edid from being turned into a dangling pointer. Fixes: f28e32d3906e ("drm/nouveau/kms: Don't change EDID when it hasn't actually changed") Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-11-13Merge tag 'vfs-5.10-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull fs freeze fix and cleanups from Darrick Wong: "A single vfs fix for 5.10, along with two subsequent cleanups. A very long time ago, a hack was added to the vfs fs freeze protection code to work around lockdep complaints about XFS, which would try to run a transaction (which requires intwrite protection) to finalize an xfs freeze (by which time the vfs had already taken intwrite). Fast forward a few years, and XFS fixed the recursive intwrite problem on its own, and the hack became unnecessary. Fast forward almost a decade, and latent bugs in the code converting this hack from freeze flags to freeze locks combine with lockdep bugs to make this reproduce frequently enough to notice page faults racing with freeze. Since the hack is unnecessary and causes thread race errors, just get rid of it completely. Making this kind of vfs change midway through a cycle makes me nervous, but a large enough number of the usual VFS/ext4/XFS/btrfs suspects have said this looks good and solves a real problem vector. And once that removal is done, __sb_start_write is now simple enough that it becomes possible to refactor the function into smaller, simpler static inline helpers in linux/fs.h. The cleanup is straightforward. Summary: - Finally remove the "convert to trylock" weirdness in the fs freezer code. It was necessary 10 years ago to deal with nested transactions in XFS, but we've long since removed that; and now this is causing subtle race conditions when lockdep goes offline and sb_start_* aren't prepared to retry a trylock failure. - Minor cleanups of the sb_start_* fs freeze helpers" * tag 'vfs-5.10-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: move __sb_{start,end}_write* to fs.h vfs: separate __sb_start_write into blocking and non-blocking helpers vfs: remove lockdep bogosity in __sb_start_write
2020-11-13Merge tag 'xfs-5.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Darrick Wong: - Fix a fairly serious problem where the reverse mapping btree key comparison functions were silently ignoring parts of the keyspace when doing comparisons - Fix a thinko in the online refcount scrubber - Fix a missing unlock in the pnfs code * tag 'xfs-5.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix a missing unlock on error in xfs_fs_map_blocks xfs: fix brainos in the refcount scrubber's rmap fragment processor xfs: fix rmap key and record comparison functions xfs: set the unwritten bit in rmap lookup flags in xchk_bmap_get_rmapextents xfs: fix flags argument to rmap lookup when converting shared file rmaps
2020-11-13Merge tag 'block-5.10-2020-11-13' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few small fixes: - NVMe pull request from Christoph: - don't clear the read-only bit on a revalidate (Sagi Grimberg) - nbd error case refcount leak (Christoph) - loop/generic uevent fix (Christoph, Petr)" * tag 'block-5.10-2020-11-13' of git://git.kernel.dk/linux-block: loop: Fix occasional uevent drop block: add a return value to set_capacity_revalidate_and_notify nbd: fix a block_device refcount leak in nbd_release nvme: fix incorrect behavior when BLKROSET is called by the user
2020-11-13Merge tag 'io_uring-5.10-2020-11-13' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fix from Jens Axboe: "A single fix in here, for a missed rounding case at setup time, which caused an otherwise legitimate setup case to return -EINVAL if used with unaligned ring size values" * tag 'io_uring-5.10-2020-11-13' of git://git.kernel.dk/linux-block: io_uring: round-up cq size before comparing with rounded sq size
2020-11-13Merge tag 'devicetree-fixes-for-5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - fix Flexcan binding schema errors introduced in rc3 - fix an of_node ref counting error in of_dma_is_coherent * tag 'devicetree-fixes-for-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: clock: imx5: fix example dt-bindings: can: fsl,flexcan.yaml: fix compatible for i.MX35 and i.MX53 dt-bindings: can: fsl,flexcan.yaml: fix fsl,stop-mode of/address: Fix of_node memory leak in of_dma_is_coherent
2020-11-13Merge tag 'pinctrl-v5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "A bunch of pin control fixes for the v5.10 kernel series. Nothing in particular to say about it, because they are all driver fixes. I'm happy that some AMD driver fixes are appearing, it's been an undermaintained driver, and laptops have suffered. Summary: - Two fixes to the Intel pin controller drivers: fixing pull resistance bias. - Fix some invalid SSI pins on the Ingenic pin controller. - Make sure the clock is enabled when requesting interrupts from the Rockchip GPIO controller. - Make sure IRQs are mapped when looking up the IRQ for a GPIO line on the Rockchip GPIO Write. - Two regmap initialization fixes for the MCP23s08. - Fix a GPI-only prefix function problem on the Aspeed pin controller. - Disable the debounce filter correctly on the AMD pin controller. - Correct the timer clock setting for the AMD debounce timer. - Make the Qualcomm pin controller more cautious around the handling of PDC-related GPIO interrupts. - Fix the interrupt map in the Qualcomm SM8250 pin controller" * tag 'pinctrl-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: sm8250: Specify PDC map pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback pinctrl: amd: use higher precision for 512 RtcClk pinctrl: amd: fix incorrect way to disable debounce filter pinctrl: aspeed: Fix GPI only function problem. pinctrl: mcp23s08: Print error message when regmap init fails pinctrl: mcp23s08: Use full chunk of memory for regmap configuration pinctrl: rockchip: create irq mapping in gpio_to_irq pinctrl: rockchip: enable gpio pclk for rockchip_gpio_to_irq pinctrl: ingenic: Fix invalid SSI pins pinctrl: intel: Set default bias in case no particular value given pinctrl: intel: Fix 2 kOhm bias which is 833 Ohm
2020-11-13Merge tag 'gpio-v5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some GPIO fixes I've collected with the help of Bartosz. Nothing special about them: all are driver and kbuild fixes + some documentation fixes: - Tidy up a missed function call in the designware driver when converting to gpiolib irqchip - Fix some bitmasks in the Aspeed driver - Fix some kerneldoc warnings and minor bugs in the improved userspace API documentation - Revert the revert of the OMAP fix for lost edge wakeup interrupts: the fix needs to stay in - Fix a compile error when deselecting the character device - A bunch of IRQ fixes on the idio GPIO drivers - Fix an off-by-one error in the SiFive GPIO driver" * tag 'gpio-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: sifive: Fix SiFive gpio probe gpio: pcie-idio-24: Enable PEX8311 interrupts gpio: pcie-idio-24: Fix IRQ Enable Register value gpio: pcie-idio-24: Fix irq mask when masking gpiolib: fix sysfs when cdev is not selected Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts"" gpio: uapi: clarify the meaning of 'empty' char arrays gpio: uapi: remove whitespace gpio: uapi: kernel-doc formatting improvements gpio: uapi: comment consistency gpio: uapi: fix kernel-doc warnings gpio: aspeed: fix ast2600 bank properties gpio: dwapb: Fix missing conversion to GPIO-lib-based IRQ-chip
2020-11-13Merge tag 'mmc-v5.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - tmio: Fixup support for reset - sdhci-of-esdhc: Extend erratum for pulse width to more broken HWs - renesas_sdhi: Fix re-binding of drivers * tag 'mmc-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: Revert "mmc: renesas_sdhi: workaround a regression when reinserting SD cards" mmc: tmio: bring tuning HW to a sane state with MMC_POWER_OFF mmc: tmio: when resetting, reset DMA controller, too mmc: sdhci-of-esdhc: Handle pulse width detection erratum for more SoCs mmc: renesas_sdhi_core: Add missing tmio_mmc_host_free() at remove
2020-11-13Merge tag 'drm-fixes-2020-11-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Nearly didn't send you a PR this week at all, but a few things trickled in over the day, not a huge amount here, some i915, amdgpu and a bunch of misc fixes. I have a couple of nouveau fixes outstanding due to the PR having the wrong base, I'll figure it out next week. amdgpu: - Pageflip fix for DCN3 - Declare TA firmware for green sardine - Headless navi fix i915: - Pull phys pread/pwrite implementations to the backend - Correctly set SFC capability for video engines bridge: - cdns Kconfig fix hyperv_fb: - fix missing include gma500: - oob access fix mcde: - unbalanced regulator fix" * tag 'drm-fixes-2020-11-13' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: enable DCN for navi10 headless SKU drm/amdgpu: add ta firmware load for green-sardine drm/i915: Correctly set SFC capability for video engines drm/i915/gem: Pull phys pread/pwrite implementations to the backend drm/i915/gem: Allow backends to override pread implementation drm/mcde: Fix unbalanced regulator drm/gma500: Fix out-of-bounds access to struct drm_device.vblank[] video: hyperv_fb: include vmalloc.h drm: bridge: cdns: Kconfig: Switch over dependency to ARCH_K3 drm/amd/display: Add missing pflip irq
2020-11-13Merge tag 'trace-v5.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull bootconfig fix from Steven Rostedt: "Fix alignment of bootconfig GRUB may align the init ramdisk size to 4 bytes, the magic number at the end of the init ramdisk that denotes bootconfig is attached may not be at the exact end of the ramdisk. The kernel needs to check back at least 4 bytes" * tag 'trace-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Extend the magic check range to the preceding 3 bytes
2020-11-13Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fix from Russell King: "Just one bug fix: avoid a fortify panic when copying optprobe template" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9019/1: kprobes: Avoid fortify_panic() when copying optprobe template
2020-11-13Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Spectre/Meltdown safelisting for some Qualcomm KRYO cores - Fix RCU splat when failing to online a CPU due to a feature mismatch - Fix a recently introduced sparse warning in kexec() - Fix handling of CPU erratum 1418040 for late CPUs - Ensure hot-added memory falls within linear-mapped region * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist arm64: Add MIDR value for KRYO2XX gold/silver CPU cores arm64/mm: Validate hotplug range before creating linear mapping arm64: smp: Tell RCU about CPUs that fail to come online arm64: psci: Avoid printing in cpu_psci_cpu_die() arm64: kexec_file: Fix sparse warning arm64: errata: Fix handling of 1418040 with late CPU onlining
2020-11-13Merge tag 'ext4_for_linus_bugfixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Two ext4 bug fixes, one being a revert of a commit sent during the merge window" * tag 'ext4_for_linus_bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: Revert "ext4: fix superblock checksum calculation race" ext4: handle dax mount option collision
2020-11-13dt-bindings: clock: imx5: fix exampleMarc Kleine-Budde
Since commit: 0e030a373df3 ("can: flexcan: fix endianess detection") the fsl,imx53-flexcan isn't compatible with the fsl,p1010-flexcan any more. As the former accesses the IP core in Little Endian mode and the latter uses Big Endian mode. With the conversion of the flexcan DT bindings to yaml, the dt_binding_check this throws the following error: Documentation/devicetree/bindings/clock/imx5-clock.example.dt.yaml: can@53fc8000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx53-flexcan', 'fsl,p1010-flexcan'] is too long Additional items are not allowed ('fsl,p1010-flexcan' was unexpected) 'fsl,imx53-flexcan' is not one of ['fsl,imx7d-flexcan', 'fsl,imx6ul-flexcan', 'fsl,imx6sx-flexcan'] 'fsl,imx53-flexcan' is not one of ['fsl,ls1028ar1-flexcan'] 'fsl,imx6q-flexcan' was expected 'fsl,lx2160ar1-flexcan' was expected From schema: /builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml The error is fixed by replacing the "fsl,p1010-flexcan" compatible (which turned out the be incompatible) with "fsl,imx25-flexcan" in the binding example. Reported-by: Rob Herring <robh+dt@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20201111213548.1621094-1-mkl@pengutronix.de [robh: Add "fsl,imx25-flexcan" as fallback] Signed-off-by: Rob Herring <robh@kernel.org>
2020-11-13dt-bindings: can: fsl,flexcan.yaml: fix compatible for i.MX35 and i.MX53Marc Kleine-Budde
As both the i.MX35 and i.MX53 flexcan IP cores are compatible to the i.MX25, they are listed as: compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan"; and: compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; in the SoC device trees. This patch fixes the following errors, which shows up during a dtbs_check: arch/arm/boot/dts/imx53-ard.dt.yaml: can@53fc8000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx53-flexcan', 'fsl,imx25-flexcan'] is too long Additional items are not allowed ('fsl,imx25-flexcan' was unexpected) 'fsl,imx53-flexcan' is not one of ['fsl,imx7d-flexcan', 'fsl,imx6ul-flexcan', 'fsl,imx6sx-flexcan'] 'fsl,imx53-flexcan' is not one of ['fsl,ls1028ar1-flexcan'] 'fsl,imx6q-flexcan' was expected 'fsl,lx2160ar1-flexcan' was expected From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml Fixes: e5ab9aa7e49b ("dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml") Reported-by: Rob Herring <robh+dt@kernel.org> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20201111130507.1560881-4-mkl@pengutronix.de [robh: drop singular fsl,imx53-flexcan and fsl,imx35-flexcan] Signed-off-by: Rob Herring <robh@kernel.org>
2020-11-13hwmon: (amd_energy) modify the visibility of the countersNaveen Krishna Chatradhi
This patch limits the visibility to owner and groups only for the energy counters exposed through the hwmon based amd_energy driver. Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20201112172159.8781-1-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-11-13usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download modeChris Brandt
Renesas R-Car and RZ/G SoCs have a firmware download mode over USB. However, on reset a banner string is transmitted out which is not expected to be echoed back and will corrupt the protocol. Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Link: https://lore.kernel.org/r/20201111131209.3977903-1-chris.brandt@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13MAINTAINERS: add usb raw gadget entryAndrey Konovalov
Add myself (using the personal email address) as a reviewer for the USB Raw Gadget driver. Acked-by: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Link: https://lore.kernel.org/r/245047b3fffaf5c0b791ed226d1ea272b2aef031.1605060950.git.andreyknvl@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13usb: typec: ucsi: Report power supply changesHeikki Krogerus
When the ucsi power supply goes online/offline, and when the power levels change, the power supply class needs to be notified so it can inform the user space. Fixes: 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class") Cc: stable@vger.kernel.org Reported-and-tested-by: Vladimir Yerilov <openmindead@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201110120547.67922-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13xhci: hisilicon: fix refercence leak in xhci_histb_probeZhang Qilong
pm_runtime_get_sync() will increment pm usage at first and it will resume the device later. We should decrease the usage count whetever it succeeded or failed(maybe runtime of the device has error, or device is in inaccessible state, or other error state). If we do not call put operation to decrease the reference, it will result in reference leak in xhci_histb_probe. Moreover, this device cannot enter the idle state and always stay busy or other non-idle state later. So we fixed it by jumping to error handling branch. Fixes: c508f41da0788 ("xhci: hisilicon: support HiSilicon STB xHCI host controller") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201106122221.2304528-1-zhangqilong3@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13Revert "usb: musb: convert to devm_platform_ioremap_resource_byname"Geert Uytterhoeven
This reverts commit 2d30e408a2a6b3443d3232593e3d472584a3e9f8. On Beaglebone Black, where each interface has 2 children: musb-dsps 47401c00.usb: can't request region for resource [mem 0x47401800-0x474019ff] musb-hdrc musb-hdrc.1: musb_init_controller failed with status -16 musb-hdrc: probe of musb-hdrc.1 failed with error -16 musb-dsps 47401400.usb: can't request region for resource [mem 0x47401000-0x474011ff] musb-hdrc musb-hdrc.0: musb_init_controller failed with status -16 musb-hdrc: probe of musb-hdrc.0 failed with error -16 Before, devm_ioremap_resource() was called on "dev" ("musb-hdrc.0" or "musb-hdrc.1"), after it is called on "&pdev->dev" ("47401400.usb" or "47401c00.usb"), leading to a duplicate region request, which fails. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 2d30e408a2a6 ("usb: musb: convert to devm_platform_ioremap_resource_byname") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201112135900.3822599-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13KVM: SVM: Update cr3_lm_rsvd_bits for AMD SEV guestsBabu Moger
For AMD SEV guests, update the cr3_lm_rsvd_bits to mask the memory encryption bit in reserved bits. Signed-off-by: Babu Moger <babu.moger@amd.com> Message-Id: <160521948301.32054.5783800787423231162.stgit@bmoger-ubuntu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-13KVM: x86: Introduce cr3_lm_rsvd_bits in kvm_vcpu_archBabu Moger
SEV guests fail to boot on a system that supports the PCID feature. While emulating the RSM instruction, KVM reads the guest CR3 and calls kvm_set_cr3(). If the vCPU is in the long mode, kvm_set_cr3() does a sanity check for the CR3 value. In this case, it validates whether the value has any reserved bits set. The reserved bit range is 63:cpuid_maxphysaddr(). When AMD memory encryption is enabled, the memory encryption bit is set in the CR3 value. The memory encryption bit may fall within the KVM reserved bit range, causing the KVM emulation failure. Introduce a new field cr3_lm_rsvd_bits in kvm_vcpu_arch which will cache the reserved bits in the CR3 value. This will be initialized to rsvd_bits(cpuid_maxphyaddr(vcpu), 63). If the architecture has any special bits(like AMD SEV encryption bit) that needs to be masked from the reserved bits, should be cleared in vendor specific kvm_x86_ops.vcpu_after_set_cpuid handler. Fixes: a780a3ea628268b2 ("KVM: X86: Fix reserved bits check for MOV to CR3") Signed-off-by: Babu Moger <babu.moger@amd.com> Message-Id: <160521947657.32054.3264016688005356563.stgit@bmoger-ubuntu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-13KVM: x86: clflushopt should be treated as a no-op by emulationDavid Edmondson
The instruction emulator ignores clflush instructions, yet fails to support clflushopt. Treat both similarly. Fixes: 13e457e0eebf ("KVM: x86: Emulator does not decode clflush well") Signed-off-by: David Edmondson <david.edmondson@oracle.com> Message-Id: <20201103120400.240882-1-david.edmondson@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-13Merge tag 'kvmarm-fixes-5.10-3' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for v5.10, take #3 - Allow userspace to downgrade ID_AA64PFR0_EL1.CSV2 - Inject UNDEF on SCXTNUM_ELx access
2020-11-13iommu/vt-d: Cure VF irqdomain hickupThomas Gleixner
The recent changes to store the MSI irqdomain pointer in struct device missed that Intel DMAR does not register virtual function devices. Due to that a VF device gets the plain PCI-MSI domain assigned and then issues compat MSI messages which get caught by the interrupt remapping unit. Cure that by inheriting the irq domain from the physical function device. Ideally the irqdomain would be associated to the bus, but DMAR can have multiple units and therefore irqdomains on a single bus. The VF 'bus' could of course inherit the domain from the PF, but that'd be yet another x86 oddity. Fixes: 85a8dfc57a0b ("iommm/vt-d: Store irq domain in struct device") Reported-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Link: https://lore.kernel.org/r/draft-87eekymlpz.fsf@nanos.tec.linutronix.de
2020-11-13arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX SilverKonrad Dybcio
QCOM KRYO2XX Silver cores are Cortex-A53 based and are susceptible to the 845719 erratum. Add them to the lookup list to apply the erratum. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20201104232218.198800-5-konrad.dybcio@somainline.org Signed-off-by: Will Deacon <will@kernel.org>
2020-11-13arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-listKonrad Dybcio
KRYO2XX silver (LITTLE) CPUs are based on Cortex-A53 and they are not affected by spectre-v2. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20201104232218.198800-4-konrad.dybcio@somainline.org Signed-off-by: Will Deacon <will@kernel.org>
2020-11-13arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelistKonrad Dybcio
QCOM KRYO2XX gold (big) silver (LITTLE) CPU cores are based on Cortex-A73 and Cortex-A53 respectively and are meltdown safe, hence add them to kpti_safe_list[]. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20201104232218.198800-3-konrad.dybcio@somainline.org Signed-off-by: Will Deacon <will@kernel.org>
2020-11-13arm64: Add MIDR value for KRYO2XX gold/silver CPU coresKonrad Dybcio
Add MIDR value for KRYO2XX gold (big) and silver (LITTLE) CPU cores which are used in Qualcomm Technologies, Inc. SoCs. This will be used to identify and apply errata which are applicable for these CPU cores. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20201104232218.198800-2-konrad.dybcio@somainline.org Signed-off-by: Will Deacon <will@kernel.org>
2020-11-13arm64/mm: Validate hotplug range before creating linear mappingAnshuman Khandual
During memory hotplug process, the linear mapping should not be created for a given memory range if that would fall outside the maximum allowed linear range. Else it might cause memory corruption in the kernel virtual space. Maximum linear mapping region is [PAGE_OFFSET..(PAGE_END -1)] accommodating both its ends but excluding PAGE_END. Max physical range that can be mapped inside this linear mapping range, must also be derived from its end points. This ensures that arch_add_memory() validates memory hot add range for its potential linear mapping requirements, before creating it with __create_pgd_mapping(). Fixes: 4ab215061554 ("arm64: Add memory hotplug support") Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1605252614-761-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-13Merge tag 'amd-drm-fixes-5.10-2020-11-12' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.10-2020-11-12: amdgpu: - Pageflip fix for DCN3 - Declare TA firmware for green sardine - Headless navi fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201113055512.3963-1-alexander.deucher@amd.com
2020-11-13Merge tag 'drm-intel-fixes-2020-11-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Pull phys pread/pwrite implementations to the backend (Chris) - Correctly set SFC capability for video engines (Venkata) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201113052551.GA1319429@intel.com
2020-11-13drm/amdgpu: enable DCN for navi10 headless SKUTianci.Yin
There is a NULL pointer crash when DCN disabled on headless SKU. On normal SKU, the variable adev->ddev.mode_config.funcs is initialized in dm_hw_init(), and it is fine to access it in amdgpu_device_resume(). But on headless SKU, DCN is disabled, the funcs variable is not initialized, then crash arises. Enable DCN to fix this issue. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amdgpu: add ta firmware load for green-sardineRoman Li
[Why] In preparation to enabling hdcp on green sardine. [How] Add green-sardine ta f/w loading in psp_v12 Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13Merge tag 'drm-misc-fixes-2020-11-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes One Kconfig fix for bridge/cdns, a missing include for hypervb_fb, an out-of-bound access fix for gma500 and a unbalanced regulator fix for mcde. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201112130726.qwtryqvgspmljkax@gilmour.lan
2020-11-12bootconfig: Extend the magic check range to the preceding 3 bytesMasami Hiramatsu
Since Grub may align the size of initrd to 4 if user pass initrd from cpio, we have to check the preceding 3 bytes as well. Link: https://lkml.kernel.org/r/160520205132.303174.4876760192433315429.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 85c46b78da58 ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly") Reported-by: Chen Yu <yu.chen.surf@gmail.com> Tested-by: Chen Yu <yu.chen.surf@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 20:04:20 +0000