summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-19irqchip/gic-v3-its: Workaround HiSilicon Hip07 redistributor addressingMarc Zyngier
The ITSes on the Hip07 (as present in the Huawei D05) are broken when it comes to addressing the redistributors, and need to be explicitely told to address the VLPI page instead of the redistributor base address. So let's add yet another quirk, fixing up the target address in the command stream. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Pass its_node pointer to each command builderMarc Zyngier
In order to be able to issue command variants depending on how broken an ITS is, let's pass the its pointer to all command building primitives. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Add post-mortem info on command timeoutMarc Zyngier
If the ITS stops processing commands, we're pretty much toasted as we cannot update the configuration anymore (and we're not even sure that the ITS still translates interrups). If that happens, let's dump some basic information about the state of affairs before moving on. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3: Add workaround for Synquacer pre-ITSArd Biesheuvel
The Socionext Synquacer SoC's implementation of GICv3 has a so-called 'pre-ITS', which maps 32-bit writes targeted at a separate window of size '4 << device_id_bits' onto writes to GITS_TRANSLATER with device ID taken from bits [device_id_bits + 1:2] of the window offset. Writes that target GITS_TRANSLATER directly are reported as originating from device ID #0. So add a workaround for this. Given that this breaks isolation, clear the IRQ_DOMAIN_FLAG_MSI_REMAP flag as well. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic: Make quirks matching conditional on init return valueArd Biesheuvel
As it turns out, the IIDR is not sufficient to distinguish between GICv3 implementations when it comes to enabling quirks. So update the prototype of the init() hook to return a bool, and interpret a 'false' return value as no match, in which case the 'enabling workaround' log message should not be printed. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3: Probe device ID space before quirks handlingArd Biesheuvel
Before adding another SoC whose device ID space deviates from the value presented in the GIC ID registers, let's slightly refactor the code so that the ID registers are probed before that quirks handling executes. This allows us to move the device ID override into the quirk handler itself. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3: Add support for Range Selector (RS) featureShanker Donthineni
A new feature Range Selector (RS) has been added to GIC specification in order to support more than 16 CPUs at affinity level 0. New fields are introduced in SGI system registers (ICC_SGI0R_EL1, ICC_SGI1R_EL1 and ICC_ASGI1R_EL1) to relax an artificial limit of 16 at level 0. - A new RSS field in ICC_CTLR_EL3, ICC_CTLR_EL1 and ICV_CTLR_EL1: [18] - Range Selector Support (RSS) 0b0 = Targeted SGIs with affinity level 0 values of 0-15 are supported. 0b1 = Targeted SGIs with affinity level 0 values of 0-255 are supported. - A new RS field in ICC_SGI0R_EL1, ICC_SGI1R_EL1 and ICC_ASGI1R_EL1: [47:44] - RangeSelector (RS) which group of 16 TargetList[n] field TargetList[n] represents aff0 value ((RS*16)+n) When ICC_CTLR_EL3.RSS==0 or ICC_CTLR_EL1.RSS==0, RS is RES0. - A new RSS field in GICD_TYPER: [26] - Range Selector Support (RSS) 0b0 = Targeted SGIs with affinity level 0 values of 0-15 are supported. 0b1 = Targeted SGIs with affinity level 0 values of 0-255 are supported. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/brcmstb-l2: Add support for the BCM7271 L2 controllerDoug Berger
Add the initialization of the generic irq chip for the BCM7271 L2 interrupt controller. This controller only supports level interrupts and uses the "brcm,bcm7271-l2-intc" compatibility string. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/brcmstb-l2: Abstract register accessesDoug Berger
Added register block offsets to the brcmstb_l2_intc_data structure for the status and mask registers to support reading the active interupts in an abstracted way. It seems like an irq_chip method should have been provided for this, but it's not there yet. Abstracted the implementation of the handler, suspend, and resume functions to not use any hard coded register offsets. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/brcmstb-l2: Remove some processing from the handlerDoug Berger
Saving the generic chip pointer in the brcmstb_l2_intc_data prevents the need to call irq_get_domain_generic_chip(). Also don't need to save parent_irq and base there since local variables in the brcmstb_l2_intc_of_init() function are just as good. The handle_edge_irq flow or chained_irq_enter takes care of the acknowledgment of the interrupt so it is redundant to clear it in brcmstb_l2_intc_irq_handle(). irq_linear_revmap() is a fast path equivalent of irq_find_mapping() that is appropriate to use for domain controllers of this type. Defining irq_mask_ack is slightly more efficient than just implementing irq_mask and irq_ack separately. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/renesas-intc-irqpin: Use of_device_get_match_data() helperGeert Uytterhoeven
Use the of_device_get_match_data() helper instead of open coding. Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19dt-bindings: irqchip: renesas-irqc: Document R-Car M3-W, V3M, D3 supportGeert Uytterhoeven
Document support for the Interrupt Controller for Externel Devices (INTC-EX) in the Renesas M3-W (r8a7796), V3M (r8a77970), and D3 (r8a77995) SoCs. No driver update is needed. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqdomain: Add __rcu annotations to radix tree slotMasahiro Yamada
Fix different address spaces warning of sparse. kernel/irq/irqdomain.c:1463:14: warning: incorrect type in assignment (different address spaces) kernel/irq/irqdomain.c:1463:14: expected void **slot kernel/irq/irqdomain.c:1463:14: got void [noderef] <asn:4>** kernel/irq/irqdomain.c:1465:66: warning: incorrect type in argument 2 (different address spaces) kernel/irq/irqdomain.c:1465:66: expected void [noderef] <asn:4>**slot kernel/irq/irqdomain.c:1465:66: got void **slot Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqdomain: Move revmap_trees_mutex to struct irq_domainMasahiro Yamada
The revmap_trees_mutex protects domain->revmap_tree. There is no need to make it global because it is allowed to modify revmap_tree of two different domains concurrently. Having said that, this would not be a actual bottleneck because the interrupt map/unmap does not occur quite often. Rather, the motivation is to tidy up the code from a data structure point of view. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-16irqchip: Add Kconfig menuRandy Dunlap
Add a menu for IRQ chip drivers. This makes the Device drivers menu be more consistent (listing "subsystems" instead of specific options) and makes the IRQCHIP options be listed in expected places for 'make menu|xconfig'. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/3db7385a-c6a1-5c93-0797-6f4b6b2b2cde@infradead.org
2017-10-16irqchip/irq-omap-intc: Do not statically initialize variablesLadislav Michl
omap_nr_pending and omap_nr_irqs variables are initialized right at the beginning of intc_of_init function, so there's no need to statically initialize them. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/20171016161303.veumgcd3xom5c54r@lenoch
2017-10-16irqchip/irq-omap-intc: Remove omap3_init_irq()Ladislav Michl
All mach-omap2 variants are device tree only now, so this function is dead code. Remove it. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-omap@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/20171016160422.uu2i7vvrgy7cc4aw@lenoch
2017-09-25genirq/matrix: Add tracepointsThomas Gleixner
Add tracepoints for the irq bitmap matrix allocator. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213153.279468022@linutronix.de
2017-09-25genirq: Implement bitmap matrix allocatorThomas Gleixner
Implement the infrastructure for a simple bitmap based allocator, which will replace the x86 vector allocator. It's in the core code as other architectures might be able to reuse/extend it. For now it only implements allocations for single CPUs, but it's simple to add multi CPU allocation support if required. The concept is rather simple: Global information: system_vector bitmap global accounting PerCPU information: allocation bitmap managed allocation bitmap local accounting The system vector bitmap is used to exclude vectors system wide from the allocation space. The allocation bitmap is used to keep track of per cpu used vectors. The managed allocation bitmap is used to reserve vectors for managed interrupts. When a regular (non managed) interrupt allocation happens then the following rule applies: tmpmap = system_map | alloc_map | managed_map find_zero_bit(tmpmap) Oring the bitmaps together gives the real available space. The same rule applies for reserving a managed interrupt vector. But contrary to the regular interrupts the reservation only marks the bit in the managed map and therefor excludes it from the regular allocations. The managed map is only cleaned out when the a managed interrupt is completely released and it stays alive accross CPU offline/online operations. For managed interrupt allocations the rule is: tmpmap = managed_map & ~alloc_map find_first_bit(tmpmap) This returns the first bit which is in the managed map, but not yet allocated in the allocation map. The allocation marks it in the allocation map and hands it back to the caller for use. The rest of the code are helper functions to handle the various requirements and the accounting which are necessary to replace the x86 vector allocation code. The result is a single patch as the evolution of this infrastructure cannot be represented in bits and pieces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213153.185437174@linutronix.de
2017-09-25genirq/irqdomain: Add force reactivation flag to irq domainsThomas Gleixner
Allow irqdomains to tell the core code, that after early activation the interrupt needs to be reactivated at request_irq() time. This allows reservation of vectors at early activation time and actual vector assignment at request_irq() time. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213153.106242536@linutronix.de
2017-09-25genirq/irqdomain: Propagate early activationThomas Gleixner
Propagate the early activation mode to the irqdomain activate() callbacks. This is required for the upcoming reservation, late vector assignment scheme, so that the early activation call can act accordingly. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213153.028353660@linutronix.de
2017-09-25genirq/irqdomain: Allow irq_domain_activate_irq() to failThomas Gleixner
Allow irq_domain_activate_irq() to fail. This is required to support a reservation and late vector assignment scheme. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.933882227@linutronix.de
2017-09-25genirq/irqdomain: Update irq_domain_ops.activate() signatureThomas Gleixner
The irq_domain_ops.activate() callback has no return value and no way to tell the function that the activation is early. The upcoming changes to support a reservation scheme which allows to assign interrupt vectors on x86 only when the interrupt is actually requested requires: - A return value, so activation can fail at request_irq() time - Information that the activate invocation is early, i.e. before request_irq(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.848490816@linutronix.de
2017-09-25genirq: Separate activation and startupThomas Gleixner
Activation of an interrupt and startup are currently a combo functionlity. That works so far, but upcoming changes require a strict separation because the activation can fail in future. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.754334077@linutronix.de
2017-09-25genirq: Set managed shut down flag at initThomas Gleixner
Managed interrupts should start up in managed shutdown mode. Set the status flag when initialising the irq descriptor. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.669687742@linutronix.de
2017-09-25genirq: Make state consistent for !IRQ_DOMAIN_HIERARCHYThomas Gleixner
In the !IRQ_DOMAIN_HIERARCHY cas the activation stubs are not setting/clearing the activation status bits. This is not a problem at the moment, but upcoming changes require a correct status. Add the set/clear incovations to the stub functions and move them to the core internal header to avoid duplication and visibility outside the core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.591985591@linutronix.de
2017-09-25irqdomain/debugfs: Provide domain specific debug callbackThomas Gleixner
Some interrupt domains like the X86 vector domain has special requirements for debugging, like showing the vector usage on the CPUs. Add a callback to the irqdomain ops which can be filled in by domains which require it and add conditional invocations to the irqdomain and the per irq debug files. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.512937505@linutronix.de
2017-09-25genirq/msi: Capture device name for debugfsThomas Gleixner
For debugging the allocation of unused or potentially leaked interrupt descriptor it's helpful to have some information about the site which allocated them. In case of MSI this is simple because the caller hands the device struct pointer into the domain allocation function. Duplicate the device name and show it in the debugfs entry of the interrupt descriptor. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.433038426@linutronix.de
2017-09-25genirq/debugfs: Show debug information for all irq descriptorsThomas Gleixner
Currently the debugfs shows only information about actively used interrupts like /proc/irq/ does. That's fine for most cases, but not helpful when internals of allocated, but unused interrupt descriptors have to debugged. It's also useful to provide information about all descriptors so leaks can be debugged in a simpler way. Move the debugfs registration to the descriptor allocation code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.355525908@linutronix.de
2017-09-25genirq: Check __free_irq() return value for NULLAlexandru Moise
__free_irq() can return a NULL irqaction for example when trying to free already-free IRQ, but the callsite unconditionally dereferences the returned pointer. Fix this by adding a check and return NULL. Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20170919200412.GA29985@gmail.com
2017-09-24Linux 4.14-rc2Linus Torvalds
2017-09-24Merge tag 'devicetree-fixes-for-4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - fix build for !OF providing empty of_find_device_by_node - fix Abracon vendor prefix - sync dtx_diff include paths (again) - a stm32h7 clock binding doc fix * tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: clk: stm32h7: fix clock-cell size scripts/dtc: dtx_diff - 2nd update of include dts paths to match build dt-bindings: fix vendor prefix for Abracon of: provide inline helper for of_find_device_by_node
2017-09-24Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Another round of CR3/PCID related fixes (I think this addresses all but one of the known problems with PCID support), an objtool fix plus a Clang fix that (finally) solves all Clang quirks to build a bootable x86 kernel as-is" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Fix inline asm call constraints for Clang objtool: Handle another GCC stack pointer adjustment bug x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code x86/mm: Factor out CR3-building code
2017-09-24Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "A clocksource driver section mismatch fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/integrator: Fix section mismatch warning
2017-09-24Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Three irqchip driver fixes, and an affinity mask helper function bug fix affecting x86" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "genirq: Restrict effective affinity to interrupts actually using it" irqchip.mips-gic: Fix shared interrupt mask writes irqchip/gic-v4: Fix building with ancient gcc irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()
2017-09-24Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull address-limit checking fixes from Ingo Molnar: "This fixes a number of bugs in the address-limit (USER_DS) checks that got introduced in the merge window, (mostly) affecting the ARM and ARM64 platforms" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/syscalls: Move address limit check in loop arm/syscalls: Optimize address limit check Revert "arm/syscalls: Check address limit on user-mode return" syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_check
2017-09-24Merge branch 'next-general' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull misc security layer update from James Morris: "This is the remaining 'general' change in the security tree for v4.14, following the direct merging of SELinux (+ TOMOYO), AppArmor, and seccomp. That's everything now for the security tree except IMA, which will follow shortly (I've been traveling for the past week with patchy internet)" * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: fix description of values returned by cap_inode_need_killpriv
2017-09-24Merge branch 'next-tpm' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM updates from James Morris: "Here are the TPM updates from Jarkko for v4.14, which I've placed in their own branch (next-tpm). I ended up cherry-picking them as other changes had been made in Jarkko's branch after he sent me his original pull request. I plan on maintaining a separate branch for TPM (and other security subsystems) from now on. From Jarkko: 'Not much this time except a few fixes'" * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: ibmvtpm: simplify crq initialization and document crq format tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers Documentation: tpm: add powered-while-suspended binding documentation tpm: tpm_crb: constify acpi_device_id. tpm: vtpm: constify vio_device_id
2017-09-23tpm: ibmvtpm: simplify crq initialization and document crq formatMichal Suchanek
The crq is passed in registers and is the same on BE and LE hosts. However, current implementation allocates a structure on-stack to represent the crq, initializes the members swapping them to BE, and loads the structure swapping it from BE. This is pointless and causes GCC warnings about ununitialized members. Get rid of the structure and the warnings. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-09-23tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic driversHamza Attak
The patch simply replaces all msleep function calls with usleep_range calls in the generic drivers. Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a thousand PCR extends, we see results going from 1m57s unpatched to 40s with the new patch. We obtain similar results when using the original and patched tpm_infineon driver, which is also part of the patch. Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per extend unpatched and around 7ms with the new patch. Note that the PCR consistency is untouched with this patch, each TPM has been tested with 10 million extends and the aggregated PCR value is continuously verified to be correct. As an extension of this work, this could potentially and easily be applied to other vendor's drivers. Still, these changes are not included in the proposed patch as they are untested. Signed-off-by: Hamza Attak <hamza@hpe.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-09-23Documentation: tpm: add powered-while-suspended binding documentationEnric Balletbo i Serra
Add a new powered-while-suspended property to control the behavior of the TPM suspend/resume. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sonny Rao <sonnyrao@chromium.org> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-09-23tpm: tpm_crb: constify acpi_device_id.Arvind Yadav
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 4198 608 0 4806 12c6 drivers/char/tpm/tpm_crb.o File size After adding 'const': text data bss dec hex filename 4262 520 0 4782 12ae drivers/char/tpm/tpm_crb.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-09-23tpm: vtpm: constify vio_device_idArvind Yadav
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-09-23security: fix description of values returned by cap_inode_need_killprivStefan Berger
cap_inode_need_killpriv returns 1 if security.capability exists and has a value and inode_killpriv() is required, 0 otherwise. Fix the description of the return value to reflect this. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-09-23Merge branch 'parisc-4.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Unbreak parisc bootloader by avoiding a gcc-7 optimization to convert multiple byte-accesses into one word-access. - Add missing HWPOISON page fault handler code. I completely missed that when I added HWPOISON support during this merge window and it only showed up now with the madvise07 LTP test case. - Fix backtrace unwinding to stop when stack start has been reached. - Issue warning if initrd has been loaded into memory regions with broken RAM modules. - Fix HPMC handler (parisc hardware fault handler) to comply with architecture specification. - Avoid compiler warnings about too large frame sizes. - Minor init-section fixes. * 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Unbreak bootloader due to gcc-7 optimizations parisc: Reintroduce option to gzip-compress the kernel parisc: Add HWPOISON page fault handler code parisc: Move init_per_cpu() into init section parisc: Check if initrd was loaded into broken RAM parisc: Add PDCE_CHECK instruction to HPMC handler parisc: Add wrapper for pdc_instr() firmware function parisc: Move start_parisc() into init section parisc: Stop unwinding at start of stack parisc: Fix too large frame size warnings
2017-09-23Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: - Smattering of miscellanous fixes - A five patch series for i40iw that had a patch (5/5) that was larger than I would like, but I took it because it's needed for large scale users - An 8 patch series for bnxt_re that landed right as I was leaving on PTO and so had to wait until now...they are all appropriate fixes for -rc IMO * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (22 commits) bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed bnxt_re: Fix memory leak in FRMR path bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port bnxt_re: Fix race between the netdev register and unregister events bnxt_re: Free up devices in module_exit path bnxt_re: Fix compare and swap atomic operands bnxt_re: Stop issuing further cmds to FW once a cmd times out bnxt_re: Fix update of qplib_qp.mtu when modified i40iw: Add support for port reuse on active side connections i40iw: Add missing VLAN priority i40iw: Call i40iw_cm_disconn on modify QP to disconnect i40iw: Prevent multiple netdev event notifier registrations i40iw: Fail open if there are no available MSI-X vectors RDMA/vmw_pvrdma: Fix reporting correct opcodes for completion IB/bnxt_re: Fix frame stack compilation warning IB/mlx5: fix debugfs cleanup IB/ocrdma: fix incorrect fall-through on switch statement IB/ipoib: Suppress the retry related completion errors iw_cxgb4: remove the stid on listen create failure iw_cxgb4: drop listen destroy replies if no ep found ...
2017-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix NAPI poll list corruption in enic driver, from Christian Lamparter. 2) Fix route use after free, from Eric Dumazet. 3) Fix regression in reuseaddr handling, from Josef Bacik. 4) Assert the size of control messages in compat handling since we copy it in from userspace twice. From Meng Xu. 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.) from Ursula Braun. 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn. 7) Don't use ARRAY_SIZE on spinlock array which might have zero entries, from Geert Uytterhoeven. 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov Kasiviswanathan. 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) inet: fix improper empty comparison net: use inet6_rcv_saddr to compare sockets net: set tb->fast_sk_family net: orphan frags on stand-alone ptype in dev_queue_xmit_nit MAINTAINERS: update git tree locations for ieee802154 subsystem net: prevent dst uses after free net: phy: Fix truncation of large IRQ numbers in phy_attached_print() net/smc: no close wait in case of process shut down net/smc: introduce a delay net/smc: terminate link group if out-of-sync is received net/smc: longer delay for client link group removal net/smc: adapt send request completion notification net/smc: adjust net_device refcount net/smc: take RCU read lock for routing cache lookup net/smc: add receive timeout check net/smc: add missing dev_put net: stmmac: Cocci spatch "of_table" lan78xx: Use default values loaded from EEPROM/OTP after reset lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE lan78xx: Fix for eeprom read/write when device auto suspend ...
2017-09-23Merge tag 'apparmor-pr-2017-09-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor updates from John Johansen: "This is the apparmor pull request, similar to SELinux and seccomp. It's the same series that I was sent to James' security tree + one regression fix that was found after the series was sent to James and would have been sent for v4.14-rc2. Features: - in preparation for secid mapping add support for absolute root view based labels - add base infastructure for socket mediation - add mount mediation - add signal mediation minor cleanups and changes: - be defensive, ensure unconfined profiles have dfas initialized - add more debug asserts to apparmorfs - enable policy unpacking to audit different reasons for failure - cleanup conditional check for label in label_print - Redundant condition: prev_ns. in [label.c:1498] Bug Fixes: - fix regression in apparmorfs DAC access permissions - fix build failure on sparc caused by undeclared signals - fix sparse report of incorrect type assignment when freeing label proxies - fix race condition in null profile creation - Fix an error code in aafs_create() - Fix logical error in verify_header() - Fix shadowed local variable in unpack_trans_table()" * tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix apparmorfs DAC access permissions apparmor: fix build failure on sparc caused by undeclared signals apparmor: fix incorrect type assignment when freeing proxies apparmor: ensure unconfined profiles have dfas initialized apparmor: fix race condition in null profile creation apparmor: move new_null_profile to after profile lookup fns() apparmor: add base infastructure for socket mediation apparmor: add more debug asserts to apparmorfs apparmor: make policy_unpack able to audit different info messages apparmor: add support for absolute root view based labels apparmor: cleanup conditional check for label in label_print apparmor: add mount mediation apparmor: add the ability to mediate signals apparmor: Redundant condition: prev_ns. in [label.c:1498] apparmor: Fix an error code in aafs_create() apparmor: Fix logical error in verify_header() apparmor: Fix shadowed local variable in unpack_trans_table()
2017-09-23x86/asm: Fix inline asm call constraints for ClangJosh Poimboeuf
For inline asm statements which have a CALL instruction, we list the stack pointer as a constraint to convince GCC to ensure the frame pointer is set up first: static inline void foo() { register void *__sp asm(_ASM_SP); asm("call bar" : "+r" (__sp)) } Unfortunately, that pattern causes Clang to corrupt the stack pointer. The fix is easy: convert the stack pointer register variable to a global variable. It should be noted that the end result is different based on the GCC version. With GCC 6.4, this patch has exactly the same result as before: defconfig defconfig-nofp distro distro-nofp before 9820389 9491555 8816046 8516940 after 9820389 9491555 8816046 8516940 With GCC 7.2, however, GCC's behavior has changed. It now changes its behavior based on the conversion of the register variable to a global. That somehow convinces it to *always* set up the frame pointer before inserting *any* inline asm. (Therefore, listing the variable as an output constraint is a no-op and is no longer necessary.) It's a bit overkill, but the performance impact should be negligible. And in fact, there's a nice improvement with frame pointers disabled: defconfig defconfig-nofp distro distro-nofp before 9796316 9468236 9076191 8790305 after 9796957 9464267 9076381 8785949 So in summary, while listing the stack pointer as an output constraint is no longer necessary for newer versions of GCC, it's still needed for older versions. Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-23objtool: Handle another GCC stack pointer adjustment bugJosh Poimboeuf
The kbuild bot reported the following warning with GCC 4.4 and a randconfig: net/socket.o: warning: objtool: compat_sock_ioctl()+0x1083: stack state mismatch: cfa1=7+160 cfa2=-1+0 This is caused by another GCC non-optimization, where it backs up and restores the stack pointer for no apparent reason: 2f91: 48 89 e0 mov %rsp,%rax 2f94: 4c 89 e7 mov %r12,%rdi 2f97: 4c 89 f6 mov %r14,%rsi 2f9a: ba 20 00 00 00 mov $0x20,%edx 2f9f: 48 89 c4 mov %rax,%rsp This issue would have been happily ignored before the following commit: dd88a0a0c861 ("objtool: Handle GCC stack pointer adjustment bug") But now that objtool is paying attention to such stack pointer writes to/from a register, it needs to understand them properly. In this case that means recognizing that the "mov %rsp, %rax" instruction is potentially a backup of the stack pointer. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: dd88a0a0c861 ("objtool: Handle GCC stack pointer adjustment bug") Link: http://lkml.kernel.org/r/8c7aa8e9a36fbbb6655d9d8e7cea58958c912da8.1505942196.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 03:02:00 +0000