| Age | Commit message (Collapse) | Author |
|---|
|
Or Gerlitz says:
====================
mlx4 driver encapsulation/steering fixes
The 1st patch fixes a bug in the TX path that supports offloading the
TX checksum of (VXLAN) encapsulated TCP packets. It turns out that the
bug is revealed only when the receiver runs in non-offloaded mode, so
we somehow missed it so far... please queue it for -stable >= 3.14
The 2nd patch makes sure not to leak steering entry on error flow,
please queue it to 3.17-stable
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If mlx4_ib_create_flow() attempts to create > 1 rules with the
firmware, and one of these registrations fail, we leaked the
already created flow rules.
One example of the leak is when the registration of the VXLAN ghost
steering rule fails, we didn't unregister the original rule requested
by the user, introduced in commit d2fce8a9060d "mlx4: Set
user-space raw Ethernet QPs to properly handle VXLAN traffic".
While here, add dump of the VXLAN portion of steering rules
so it can actually be seen when flow creation fails.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For VXLAN/NVGRE encapsulation, the current HW doesn't support offloading
both the outer UDP TX checksum and the inner TCP/UDP TX checksum.
The driver doesn't advertize SKB_GSO_UDP_TUNNEL_CSUM, however we are wrongly
telling the HW to offload the outer UDP checksum for encapsulated packets,
fix that.
Fixes: 837052d0ccc5 ('net/mlx4_en: Add netdev support for TCP/IP
offloads of vxlan tunneling')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2014-10-30
This series contains updates to e1000, igb and ixgbe.
Francesco Ruggeri fixes an issue with e1000 where in a VM the driver did
not support unicast filtering.
Roman Gushchin fixes an issue with igb where the driver was re-using
mapped pages so that packets were still getting dropped even if all
the memory issues are gone and there is free memory.
Junwei Zhang found where in the ixgbe_clean_rx_ring() we were repeating
the assignment of NULL to the receive buffer skb and fixes it.
Emil fixes a race condition between setup_link and SFP detection routine
in the watchdog when setting the advertised speed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we cache them, the kernel will reuse them, independently of
whether forwarding is enabled or not. Which means that if forwarding is
disabled on the input interface where the first routing request comes
from, then that unreachable result will be cached and reused for
other interfaces, even if forwarding is enabled on them. The opposite
is also true.
This can be verified with two interfaces A and B and an output interface
C, where B has forwarding enabled, but not A and trying
ip route get $dst iif A from $src && ip route get $dst iif B from $src
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The man page for open(2) indicates that when O_CREAT is specified, the
'mode' argument applies only to future accesses to the file:
Note that this mode applies only to future accesses of the newly
created file; the open() call that creates a read-only file
may well return a read/write file descriptor.
The man page for open(2) implies that 'mode' is treated identically by
O_CREAT and O_TMPFILE.
O_TMPFILE, however, behaves differently:
int fd = open("/tmp", O_TMPFILE | O_RDWR, 0);
assert(fd == -1);
assert(errno == EACCES);
int fd = open("/tmp", O_TMPFILE | O_RDWR, 0600);
assert(fd > 0);
For O_CREAT, do_last() sets acc_mode to MAY_OPEN only:
if (*opened & FILE_CREATED) {
/* Don't check for write permission, don't truncate */
open_flag &= ~O_TRUNC;
will_truncate = false;
acc_mode = MAY_OPEN;
path_to_nameidata(path, nd);
goto finish_open_created;
}
But for O_TMPFILE, do_tmpfile() passes the full op->acc_mode to
may_open().
This patch lines up the behavior of O_TMPFILE with O_CREAT. After the
inode is created, may_open() is called with acc_mode = MAY_OPEN, in
do_tmpfile().
A different, but related glibc bug revealed the discrepancy:
https://sourceware.org/bugzilla/show_bug.cgi?id=17523
The glibc lazily loads the 'mode' argument of open() and openat() using
va_arg() only if O_CREAT is present in 'flags' (to support both the 2
argument and the 3 argument forms of open; same idea for openat()).
However, the glibc ignores the 'mode' argument if O_TMPFILE is in
'flags'.
On x86_64, for open(), it magically works anyway, as 'mode' is in
RDX when entering open(), and is still in RDX on SYSCALL, which is where
the kernel looks for the 3rd argument of a syscall.
But openat() is not quite so lucky: 'mode' is in RCX when entering the
glibc wrapper for openat(), while the kernel looks for the 4th argument
of a syscall in R10. Indeed, the syscall calling convention differs from
the regular calling convention in this respect on x86_64. So the kernel
sees mode = 0 when trying to use glibc openat() with O_TMPFILE, and
fails with EACCES.
Signed-off-by: Eric Rannaud <e@nanocritical.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
win0_lock was being used un-initialized, resulting in warning traces
being seen when lock debugging is enabled (and just wrong)
Fixes : fc5ab0209650 ('cxgb4: Replaced the backdoor mechanism to access the HW
memory with PCIe Window method')
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hayes Wang says:
====================
r8152: patches for autosuspend
There are unexpected processes when enabling autosuspend.
These patches are used to fix them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid unnecessary behavior when autosuspend occurs during open().
The relative processes should only be run after finishing open().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If (tp->speed & LINK_STATUS) is not zero, the rtl8152_resume()
would call rtl_start_rx() before enabling the tx/rx. Avoid this
by resetting it to zero.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The flag of SELECTIVE_SUSPEND should be cleared when autoresuming.
Otherwise, when the system suspend and resume occur, it may have
the wrong flow.
Besides, because the flag of SELECTIVE_SUSPEND couldn't be used
to check if the hw enables the relative feature, it should alwayes
be disabled in close().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An error in the code makes the allocated space for firmware to be too
small.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The new version of rtlwifi needs code in rtl92ce_get_desc() that returns
the buffer address for read operations.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The new version of rtlwifi needs code in rtl92se_get_desc() that returns
the buffer address for read operations.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Driver rtlwifi has been modified to call ieee80211_register_hw()
from the probe routine; however, the existing call in the callback
routine for deferred firmware loading was not removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
get_btc_status
The recent changes in checking for Bluetooth status added some callbacks to code
in rtlwifi. To make certain that all callbacks are defined, a dummy routine has been
added to rtlwifi, and the drivers that need to use it are modified.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Murilo Opsfelder Araujo <mopsfelder@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
During 11n RX reordering, if there is a hole in RX table,
driver will not send packets to kernel until the rxreorder
timer expires or the table is full.
However, currently driver always restarts rxreorder timer when
receiving a packet, which causes the timer hardly to expire.
So while connected with to 11n AP in a busy environment,
ping packets may get blocked for about 30 seconds.
This patch fixes this timer restarting by ensuring rxreorder timer
would only be restarted either timer is not set or start_win
has changed.
Signed-off-by: Chin-Ran Lo <crlo@marvell.com>
Signed-off-by: Plus Chen <pchen@marvell.com>
Signed-off-by: Marc Yang <yangyang@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The right shift operation has higher precedence than the mask so we
left shift by "(i * 3)" and then immediately right shift by "(i * 3)"
then we mask. It should be left shift, mask, and then right shift.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
0x1b75 0xa200 AirLive WN-200USB wireless 11b/g/n dongle
References: https://bugs.debian.org/766802
Reported-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Back in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"),
I misstyped the 'enable' sysfs filename as 'enabled', which broke the
userspace API. This patch fixes that issue by renaming the file back.
Fixes: 5136b2da770d ("PCI: convert bus code to use dev_groups")
Reported-by: Jeff Epler <jepler@unpythonic.net>
Tested-by: Jeff Epler <jepler@unpythonic.net> # on v3.14-rt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # 3.13
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- fix fb console option parsing
- fixes for OMAPDSS/OMAPFB crashes related to module unloading and
device/driver binding & unbinding.
- fix for OMAP HDMI PLL locking failing in certain cases
- misc minor fixes for atmel lcdfb and OMAP
* tag 'fbdev-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
omap: dss: connector-analog-tv: Add missing module device table
OMAPDSS: DSI: Fix PLL_SELFEQDCO field width
OMAPDSS: fix dispc register dump for preload & mflag
OMAPDSS: DISPC: fix mflag offset
OMAPDSS: HDMI: fix regsd write
OMAPDSS: HDMI: fix PLL GO bit handling
OMAPFB: fix releasing overlays
OMAPFB: fix overlay disable when freeing resources.
OMAPDSS: apply: wait pending updates on manager disable
OMAPFB: remove __exit annotation
OMAPDSS: set suppress_bind_attrs
OMAPFB: add missing MODULE_ALIAS()
drivers: video: fbdev: atmel_lcdfb.c: remove unnecessary header
video/console: Resolve several shadow warnings
fbcon: Fix option parsing control flow in fb_console_setup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Although the diffstat looks scary, it's just because of the removal of
the dead code (s6000), thus it must not affect anything serious.
Other than that, all small fixes. The only core fix is zero-clear for
a PCM compat ioctl. The rest are driver-specific, bebob, sgtl500,
adau1761, intel-sst, ad1889 and a few HD-audio quirks as usual"
* tag 'sound-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add workaround for CMI8888 snoop behavior
ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat mode
ALSA: bebob: Uninitialized id returned by saffirepro_both_clk_src_get
ALSA: hda/realtek - New SSID for Headset quirk
ALSA: ad1889: Fix probable mask then right shift defects
ALSA: bebob: fix wrong decoding of clock information for Terratec PHASE 88 Rack FW
ALSA: hda/realtek - Update restore default value for ALC283
ALSA: hda/realtek - Update restore default value for ALC282
ASoC: fsl: use strncpy() to prevent copying of over-long names
ASoC: adau1761: Fix input PGA volume
ASoC: s6000: remove driver
ASoC: Intel: HSW/BDW only support S16 and S24 formats.
ASoC: sgtl500: Document the required supplies
|
|
ext4_ext_convert_to_initialized() can return more blocks than are
actually allocated from map->m_lblk in case where initial part of the
on-disk extent is zeroed out. Luckily this doesn't have serious
consequences because the caller currently uses the return value
only to unmap metadata buffers. Anyway this is a data
corruption/exposure problem waiting to happen so fix it.
Coverity-id: 1226848
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When clearing inode journal flag, we call jbd2_journal_flush() to force
all the journalled data to their final locations. Currently we ignore
when this fails and continue clearing inode journal flag. This isn't a
big problem because when jbd2_journal_flush() fails, journal is likely
aborted anyway. But it can still lead to somewhat confusing results so
rather bail out early.
Coverity-id: 989044
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When ext4_handle_dirty_dx_node() or ext4_handle_dirty_dirent_node()
fail, there's really something wrong with the fs and there's no point in
continuing further. Just return error from make_indexed_dir() in that
case. Also initialize frames array so that if we return early due to
error, dx_release() doesn't try to dereference uninitialized memory
(which could happen also due to error in do_split()).
Coverity-id: 741300
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
The old hash function didn't work well for 64-bit block numbers, and
used undefined (negative) shift right behavior. Use the generic
64-bit hash function instead.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Andrey Ryabinin <a.ryabinin@samsung.com>
|
|
O_DIRECT flags can be toggeled via fcntl(F_SETFL). But this value checked
twice inside ext4_file_write_iter() and __generic_file_write() which
result in BUG_ON inside ext4_direct_IO.
Let's initialize iocb->private unconditionally.
TESTCASE: xfstest:generic/036 https://patchwork.ozlabs.org/patch/402445/
#TYPICAL STACK TRACE:
kernel BUG at fs/ext4/inode.c:2960!
invalid opcode: 0000 [#1] SMP
Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod
CPU: 6 PID: 5505 Comm: aio-dio-fcntl-r Not tainted 3.17.0-rc2-00176-gff5c017 #161
Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011
task: ffff88080e95a7c0 ti: ffff88080f908000 task.ti: ffff88080f908000
RIP: 0010:[<ffffffff811fabf2>] [<ffffffff811fabf2>] ext4_direct_IO+0x162/0x3d0
RSP: 0018:ffff88080f90bb58 EFLAGS: 00010246
RAX: 0000000000000400 RBX: ffff88080fdb2a28 RCX: 00000000a802c818
RDX: 0000040000080000 RSI: ffff88080d8aeb80 RDI: 0000000000000001
RBP: ffff88080f90bbc8 R08: 0000000000000000 R09: 0000000000001581
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88080d8aeb80
R13: ffff88080f90bbf8 R14: ffff88080fdb28c8 R15: ffff88080fdb2a28
FS: 00007f23b2055700(0000) GS:ffff880818400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f23b2045000 CR3: 000000080cedf000 CR4: 00000000000407e0
Stack:
ffff88080f90bb98 0000000000000000 7ffffffffffffffe ffff88080fdb2c30
0000000000000200 0000000000000200 0000000000000001 0000000000000200
ffff88080f90bbc8 ffff88080fdb2c30 ffff88080f90be08 0000000000000200
Call Trace:
[<ffffffff8112ca9d>] generic_file_direct_write+0xed/0x180
[<ffffffff8112f2b2>] __generic_file_write_iter+0x222/0x370
[<ffffffff811f495b>] ext4_file_write_iter+0x34b/0x400
[<ffffffff811bd709>] ? aio_run_iocb+0x239/0x410
[<ffffffff811bd709>] ? aio_run_iocb+0x239/0x410
[<ffffffff810990e5>] ? local_clock+0x25/0x30
[<ffffffff810abd94>] ? __lock_acquire+0x274/0x700
[<ffffffff811f4610>] ? ext4_unwritten_wait+0xb0/0xb0
[<ffffffff811bd756>] aio_run_iocb+0x286/0x410
[<ffffffff810990e5>] ? local_clock+0x25/0x30
[<ffffffff810ac359>] ? lock_release_holdtime+0x29/0x190
[<ffffffff811bc05b>] ? lookup_ioctx+0x4b/0xf0
[<ffffffff811bde3b>] do_io_submit+0x55b/0x740
[<ffffffff811bdcaa>] ? do_io_submit+0x3ca/0x740
[<ffffffff811be030>] SyS_io_submit+0x10/0x20
[<ffffffff815ce192>] system_call_fastpath+0x16/0x1b
Code: 01 48 8b 80 f0 01 00 00 48 8b 18 49 8b 45 10 0f 85 f1 01 00 00 48 03 45 c8 48 3b 43 48 0f 8f e3 01 00 00 49 83 7c
24 18 00 75 04 <0f> 0b eb fe f0 ff 83 ec 01 00 00 49 8b 44 24 18 8b 00 85 c0 89
RIP [<ffffffff811fabf2>] ext4_direct_IO+0x162/0x3d0
RSP <ffff88080f90bb58>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: stable@vger.kernel.org
|
|
If we can't load the journal, remove the procfs files for the extent
status information file to avoid leaking resources.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
ext4 does not permit changing the metadata or journal checksum feature
flag while mounted. Until we decide to support that, don't allow a
remount to change the journal_csum flag (right now we silently fail to
change anything).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If metadata checksumming is turned on for the FS, we need to tell the
journal to use checksumming too.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
When we fail to load block bitmap in __ext4_new_inode() we will
dereference NULL pointer in ext4_journal_get_write_access(). So check
for error from ext4_read_block_bitmap().
Coverity-id: 989065
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When there are no meta block groups update_backups() will compute the
backup block in 32-bit arithmetics thus possibly overflowing the block
number and corrupting the filesystem. OTOH filesystems without meta
block groups larger than 16 TB should be rare. Fix the problem by doing
the counting in 64-bit arithmetics.
Coverity-id: 741252
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
|
|
|
|
Without that fix connector-analog-tv driver isn't probed when compiled
as module.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Following commands:
modprobe ixgbe
ifconfig ethX up
ethtool -s ethX advertise 0x020
can lead to "setup link failed with code -14" error due to the setup_link
call racing with the SFP detection routine in the watchdog.
This patch resolves this issue by protecting the setup_link call with check
for __IXGBE_IN_SFP_INIT.
Reported-by: Scott Harrison <scoharr2@cisco.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Signed-off-by: Martin Zhang <martinbj2008@gmail.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Incoming packet is dropped silently by sk_filter(), if the skb was
allocated from pfmemalloc reserves and the corresponding socket is
not marked with the SOCK_MEMALLOC flag.
Igb driver allocates pages for DMA with __skb_alloc_page(), which
calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case
of OOM condition, igb can get pages with pfmemalloc flag set.
If an incoming packet hits the pfmemalloc page and is large enough
(small packets are copying into the memory, allocated with
netdev_alloc_skb_ip_align(), so they are not affected), it will be
dropped.
This behavior is ok under high memory pressure, but the problem is
that the igb driver reuses these mapped pages. So, packets are still
dropping even if all memory issues are gone and there is a plenty
of free memory.
In my case, some TCP sessions hang on a small percentage (< 0.1%)
of machines days after OOMs.
Fix this by avoiding reuse of such pages.
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Tested-by: Aaron Brown "aaron.f.brown@intel.com"
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
VMWare's e1000 implementation does not seem to support unicast filtering.
This can be observed by configuring a macvlan interface on eth0 in a VM in
VMWare Fusion 5.0.5, and trying to use that interface instead of eth0.
Tested on 3.16.
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent
Pull two RCU fixes from Paul E. McKenney:
" - Complete the work of commit dd56af42bd82 (rcu: Eliminate deadlock
between CPU hotplug and expedited grace periods), which was
intended to allow synchronize_sched_expedited() to be safely
used when holding locks acquired by CPU-hotplug notifiers.
This commit makes the put_online_cpus() avoid the deadlock
instead of just handling the get_online_cpus().
- Complete the work of commit 35ce7f29a44a (rcu: Create rcuo
kthreads only for onlined CPUs), which was intended to allow
RCU to avoid allocating unneeded kthreads on systems where the
firmware says that there are more CPUs than are really present.
This commit makes rcu_barrier() aware of the mismatch, so that
it doesn't hang waiting for non-existent CPUs. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix report -F (abort, in_tx, mispredict, etc) segfaults for sample.data files
without branch info (Jiri Olsa)
- Add patch that should have went in a previous patchkit to use global cache
provided by libunwind (Namhyung Kim)
- Make CPUINFO_PROC an array to support different kernels, problem
detected when the information reported via /proc/cpuinfo changed on ARM (Wang Nan)
- 'perf probe' --demangle typo fix and a new --quiet option (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Merge misc fixes from Andrew Morton:
"21 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits)
mm/balloon_compaction: fix deflation when compaction is disabled
sh: fix sh770x SCIF memory regions
zram: avoid NULL pointer access in concurrent situation
mm/slab_common: don't check for duplicate cache names
ocfs2: fix d_splice_alias() return code checking
mm: rmap: split out page_remove_file_rmap()
mm: memcontrol: fix missed end-writeback page accounting
mm: page-writeback: inline account_page_dirtied() into single caller
lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}()
drivers/rtc/rtc-bq32k.c: fix register value
memory-hotplug: clear pgdat which is allocated by bootmem in try_offline_node()
drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock
kernel/kmod: fix use-after-free of the sub_info structure
drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc
mm, thp: fix collapsing of hugepages on madvise
drivers: of: add return value to of_reserved_mem_device_init()
mm: free compound page with correct order
gcov: add ARM64 to GCOV_PROFILE_ALL
fsnotify: next_i is freed during fsnotify_unmount_inodes.
mm/compaction.c: avoid premature range skip in isolate_migratepages_range
...
|
|
If CONFIG_BALLOON_COMPACTION=n balloon_page_insert() does not link pages
with balloon and doesn't set PagePrivate flag, as a result
balloon_page_dequeue() cannot get any pages because it thinks that all
of them are isolated. Without balloon compaction nobody can isolate
ballooned pages. It's safe to remove this check.
Fixes: d6d86c0a7f8d ("mm/balloon_compaction: redesign ballooned pages management").
Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Reported-by: Matt Mullins <mmullins@mmlx.us>
Cc: <stable@vger.kernel.org> [3.17]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Resources scif1_resources & scif2_resources overlap. Actual SCIF region
size is 0x10.
This is regression from commit d850acf975be ("sh: Declare SCIF register
base and IRQ as resources")
Signed-off-by: Andriy Skulysh <askulysh@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a rare NULL pointer bug in mem_used_total_show() and
mem_used_max_store() in concurrent situation, like this:
zram is not initialized, process A is a mem_used_total reader which runs
periodically, while process B try to init zram.
process A process B
access meta, get a NULL value
init zram, done
init_done() is true
access meta->mem_pool, get a NULL pointer BUG
This patch fixes this issue.
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The SLUB cache merges caches with the same size and alignment and there
was long standing bug with this behavior:
- create the cache named "foo"
- create the cache named "bar" (which is merged with "foo")
- delete the cache named "foo" (but it stays allocated because "bar"
uses it)
- create the cache named "foo" again - it fails because the name "foo"
is already used
That bug was fixed in commit 694617474e33 ("slab_common: fix the check
for duplicate slab names") by not warning on duplicate cache names when
the SLUB subsystem is used.
Recently, cache merging was implemented the with SLAB subsystem too, in
12220dea07f1 ("mm/slab: support slab merge")). Therefore we need stop
checking for duplicate names even for the SLAB subsystem.
This patch fixes the bug by removing the check.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
d_splice_alias() can return a valid dentry, NULL or an ERR_PTR.
Currently the code checks not for ERR_PTR and will cuase an oops in
ocfs2_dentry_attach_lock(). Fix this by using IS_ERR_OR_NULL().
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page_remove_rmap() has too many branches on PageAnon() and is hard to
follow. Move the file part into a separate function.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API") changed
page migration to uncharge the old page right away. The page is locked,
unmapped, truncated, and off the LRU, but it could race with writeback
ending, which then doesn't unaccount the page properly:
test_clear_page_writeback() migration
wait_on_page_writeback()
TestClearPageWriteback()
mem_cgroup_migrate()
clear PCG_USED
mem_cgroup_update_page_stat()
if (PageCgroupUsed(pc))
decrease memcg pages under writeback
release pc->mem_cgroup->move_lock
The per-page statistics interface is heavily optimized to avoid a
function call and a lookup_page_cgroup() in the file unmap fast path,
which means it doesn't verify whether a page is still charged before
clearing PageWriteback() and it has to do it in the stat update later.
Rework it so that it looks up the page's memcg once at the beginning of
the transaction and then uses it throughout. The charge will be
verified before clearing PageWriteback() and migration can't uncharge
the page as long as that is still set. The RCU lock will protect the
memcg past uncharge.
As far as losing the optimization goes, the following test results are
from a microbenchmark that maps, faults, and unmaps a 4GB sparse file
three times in a nested fashion, so that there are two negative passes
that don't account but still go through the new transaction overhead.
There is no actual difference:
old: 33.195102545 seconds time elapsed ( +- 0.01% )
new: 33.199231369 seconds time elapsed ( +- 0.03% )
The time spent in page_remove_rmap()'s callees still adds up to the
same, but the time spent in the function itself seems reduced:
# Children Self Command Shared Object Symbol
old: 0.12% 0.11% filemapstress [kernel.kallsyms] [k] page_remove_rmap
new: 0.12% 0.08% filemapstress [kernel.kallsyms] [k] page_remove_rmap
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: <stable@vger.kernel.org> [3.17.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A follow-up patch would have changed the call signature. To save the
trouble, just fold it instead.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: <stable@vger.kernel.org> [3.17.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If __bitmap_shift_left() or __bitmap_shift_right() are asked to shift by
a multiple of BITS_PER_LONG, they will try to shift a long value by
BITS_PER_LONG bits which is undefined. Change the functions to avoid
the undefined shift.
Coverity id: 1192175
Coverity id: 1192174
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
