summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-28Bluetooth: Fix reason code for pairing rejectionJohan Hedberg
"Pairing not allowed" is 0x18 and not 0x16. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add confirm_hint parameter to user confirmation requestsJohan Hedberg
When accepting a pairing request which fulfills the SSP auto-accept criteria we need to push the request all the way to the user for confirmation. This patch adds a new hint to the user_confirm_request management event so user space can know when to show a numeric comparison dialog and when to show a simple yes/no confirmation dialog. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix HCI_CONN_AUTH_PEND flag for all authentication requestsJohan Hedberg
The HCI_CONN_AUTH_PEND flag should be set whenever requesting authentication so that multiple pending requests can't occur. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add variable SSP auto-accept delay supportJohan Hedberg
Some test systems require an arbitrary delay to the auto-accept test cases for Secure Simple Pairing in order for the tests to pass. Previously when this was handled in user space it was worked around by code modifications and recompilation, but now that it's on the kernel side it's more convenient if there's a debugfs interface for it. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add automated SSP user confirmation responsesJohan Hedberg
This patch adds automated negative and positive (auto-accept) responses for Secure Simple Pairing user confirmation requests. The responses are only sent if the HCI_MGMT flag is set in order not to confuse older user space versions (without management interface support). Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28mwifiex: fix bug in mwifiex_save_curr_bcn()Amitkumar Karwar
Since timestamp in beacon buffer keeps changing all the time, the memcmp check in mwifiex_save_curr_bcn() is redundant. Remove that memcmp check and also avoid freeing and allocation of buffer if required beacon buffer size is same as previous one. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28mwifiex: HT capability information handlingAmitkumar Karwar
1) Initialise HT capabilities in cfg80211 properly. 2) Cfg80211 stack may modify "sband->ht_cap" to disable 40Mhz operation in 2.4GHz band (after recent patch "cfg80211: module_param to disable HT40 in 2.4GHz band") Therefore read "sband->ht_cap" instead of an adapter variable "hw_dot_11n_dev_cap" to get HT capabilities. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28mwifiex: check firmware capabilities while initialising 5GHz band parametersAmitkumar Karwar
There are some SD8787 cards which don't support 5GHz band. Therefore initialise 5GHz band parameters only if hardware supports the band. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28mwl8k: replace rateinfo bitfields with mask and shift macrosJohn W. Linville
AFAICT, this driver is claiming that 24 bits of rate info fit into a 16-bit field in the Tx descriptor. Anyway, the use of bitfields is frowned-upon for a variety of well-documented reasons... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ssb: pci: early fix for SPROM core indexRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ssb: pci: update PCIe workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ssb: pci: separate workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28mac80211: Skip tailroom reservation for full HW-crypto devicesYogesh Ashok Powar
In xmit path, devices that do full hardware crypto (including TKIP MMIC) need no tailroom. For such devices, tailroom reservation can be skipped if all the keys are programmed into the hardware (i.e software crypto is not used for any of the keys) and none of the keys wants software to generate Michael MIC. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_htc: Add set_bitrate_mask() callbackSujith Manoharan
This callback is used to set the minimum rate for management frames. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_htc: Add a new WMI command to set a rate maskSujith Manoharan
This patch adds WMI_BITRATE_MASK_CMDID which can be used by the set_bitrate_mask() handler. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_htc: Remove unused WMI_AGGR_LIMIT_CMDSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_htc: Increase credit size for AR7010 devicesSujith Manoharan
Bump the firmware version to 1.2 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28mac80211: Add new API for rate selectionSujith Manoharan
This patch adds a new API for setting a TX rate mask in drivers that have rate control in either the firmware or hardware. This can be used for various purposes, for example, masking out the 11b rates in P2P operation. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28libertas: use kernel-doc notation, fix comment styleRandy Dunlap
Convert all libertas/ files to use kernel-doc notation instead of whatever it was (doxygen?). Add or fix function parameters in several places. Use expected style for multi-line comments in lots of places. Remove erroneous /** in multiple places. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28wl12xx: support FW TX inactivity triggersArik Nemtsov
In AP mode we register for the MAX_TX_RETRY and INACTIVE_STA events. Both are reported to the upper layers as a TX failure in the offending stations. In STA mode we register only for the MAX_TX_RETRY event. A TX failure is interpreted as a loss of connection. Support for IEEE80211_HW_REPORTS_TX_ACK_STATUS has been removed to avoid the inherent race condition of a mac80211 TX failure counter in addition to the FW counter. This patch depends on "mac80211: allow low level driver to report packet loss" Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k: Use ps wrappers for btcoex logic.Vivek Natarajan
Use ps wrappers before accessing hw registers in btcoex. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_hw: Enable generic timer interrupt.Vivek Natarajan
Generic timer interrupt was not triggered unless autosleep was disabled. Since autosleep is enabled in the newer chipsets, enable generic timer for using with bt coex logic. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_hw: Add support for btcoexistence in AR9300.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_hw: Move bt_stomp to hw from common.Vivek Natarajan
Move bt_stomp to ath9k_hw and add its support for latest chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28mac80211: allow low level drivers to report packet lossArik Nemtsov
Add API that allows low level drivers to notify mac80211 about TX packet loss. This is useful when there are FW triggers to notify the low level driver about these events. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28Bluetooth: Add secure flag for mgmt_pin_code_reqWaldemar Rymarkiewicz
Extend the mgmt_pin_code_request interface to require secure pin code (16 digit) for authentication. This is a kernel part of the secure pin code requirement notification to user space agent. Code styling fix by Johan Hedberg. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Respect local MITM req in io_cap replyWaldemar Rymarkiewicz
If host requires MITM protection notify that to controller in io capabilities reply even if the remote device requires no bonding. If it is not respected, host can get an unauthenticated link key while it expects authenticated one. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Ignore key unauthenticated for high securityWaldemar Rymarkiewicz
High security level for pre v2.1 devices requires combination link key authenticated by at least 16 digit PIN code. It's also necessary to update key_type and pin_length when the key exists and is sufficently secured for the connection as there will be no link key notify event in that case. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Map sec_level to link key requirementsWaldemar Rymarkiewicz
Keep the link key type together with connection and use it to map security level to link key requirements. Authenticate and/or encrypt connection if the link is insufficiently secure. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Don't modify sec_level if auth failedWaldemar Rymarkiewicz
If authentication fails the security level should stay as it was set before the process has started. Setting BT_SECURITY_LOW can hide real security level on a link eg. having BT_SECURITY_MEDIUM on the link, re-authenticate with failure to get BT_SECURITY_HIGH, as a result we get BT_SECURITY_LOW on the link while the real security is still medium. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add definitions for link key typesWaldemar Rymarkiewicz
Introduce the link key types defs and use them instead of magic numbers. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add discovering event to the Management interfaceJohan Hedberg
This patch adds a new event to the Management interface to track when local adapters are discovering remote devices. For now this only tracks BR/EDR discovery procedures. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add basic discovery commands to the management interfaceJohan Hedberg
This patch adds start_discovery and stop_discovery commands to the management interface. Right now their implementation is fairly simplistic and the parameters are fixed to what user space has defaulted to so far. This is the very initial phase for discovery implementation into the kernel. Next steps include name resolution, LE scanning and bdaddr type handling. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Don't export l2cap_sock_opsGustavo F. Padovan
l2cap_sk_ops can be static, it's not used outside l2cap_sock.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix memory leak with L2CAP channelsGustavo F. Padovan
A new l2cap_chan_free() is added to free the channels. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Move conn to struct l2cap_chanGustavo F. Padovan
There is no need to the socket deal directly with the channel, most of the time it cares about the channel only. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Move more vars to struct l2cap_chanGustavo F. Padovan
In this commit, psm, scid and dcid. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Move more channel info to struct l2cap_chanGustavo F. Padovan
In this commit, omtu, imtu, flush_to, mode and sport. It also remove the pi var from l2cap_sock_sendmsg(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-27Bluetooth: Move more vars to struct l2cap_chanGustavo F. Padovan
In this commit all ERTM and Streaming Mode specific vars. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-27Bluetooth: Move some more elements to struct l2cap_chanGustavo F. Padovan
In this commit sec_level, force_reliable, role_switch and flushable. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-27Bluetooth: Rename l2cap_do_connect() to l2cap_chan_connect()Gustavo F. Padovan
l2cap_chan_connect() is a much better name and reflects what this functions is doing (or will do once socket dependence is removed from the core). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-27Bluetooth: Move conf_state to struct l2cap_chanGustavo F. Padovan
First move of elements depending on user data. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-27Bluetooth: Refactor L2CAP channel allocationGustavo F. Padovan
If the allocation happens at l2cap_sock_create() will be able to use the struct l2cap_chan to store channel info that comes from the user via setsockopt. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-26cfg80211: fix regresion on reg user timeoutLuis R. Rodriguez
The patch "cfg80211: add a timer for invalid user reg hints" introduced a regression for the case where a secondary identical regulatory hint from a user is sent. What would happen is the second hint would schedule delayed work in to catch a timeout but since we are never processing it given that the hint was already applied we'd always hit the timeout and and restore regulatory settings back to world regulatory domain. This is fixed by simply avoiding sheduling work if the hint was already applied. Tested-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26rtlwifi: rtl8192ce: rtl8192cu: Fix most sparse warningsLarry Finger
Fix most sparse warnings in rtlwifi, rtl8192ce and rtl8192cu drivers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26rtlwifi: rtl8192ce: Change rtl8192ce routines phy and trx and modify ↵Chaoming_Li
rtl8192cu for addition of rtl8192se and rtl8192de Change rtl8192ce routines phy and trx for addition of RTL8192SE and RTL8192DE. In addition, make necessary modifications to rtl8192cu. This patch also removes the temporary patches needed to enable intermediate steps to build without error. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26rtlwifi: rtl8192ce: Change phy and rc routines for addition of rtl8192se and ↵Chaoming_Li
rtl8192de Change rtl8192ce routines phy and rc for addition of RTL8192SE and RTL8192DE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26rtlwifi: rtl8192ce: Change sw and LED routines for addition of rtl8192se and ↵Chaoming_Li
rtl8192de Change rtl8192ce sw and LED routines for addition of RTL8192SE and RTL8192DE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26rtlwifi: rtl8192ce: Change hw routine for addition of rtl8192se and rtl8192deChaoming_Li
Change rtl8192ce hw routine for addition of RTL8192SE and RTL8192DE. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26rtlwifi: rtl8192c-common: Change common PHY routines for addition of ↵Chaoming_Li
rtl8192se and rtl8192de Change common PHY routines for addition of RTL8192SE and RTL8192DE code. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-04 15:29:59 +0000