summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-21Merge branch 'master' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2021-01-21 1) Fix a rare panic on SMP systems when packet reordering happens between anti replay check and update. From Shmulik Ladkani. 2) Fix disable_xfrm sysctl when used on xfrm interfaces. From Eyal Birger. 3) Fix a race in PF_KEY when the availability of crypto algorithms is set. From Cong Wang. 4) Fix a return value override in the xfrm policy selftests. From Po-Hsu Lin. 5) Fix an integer wraparound in xfrm_policy_addr_delta. From Visa Hankala. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: Fix wraparound in xfrm_policy_addr_delta() selftests: xfrm: fix test return value override issue in xfrm_policy.sh af_key: relax availability checks for skb size calculation xfrm: fix disable_xfrm sysctl when used on xfrm interfaces xfrm: Fix oops in xfrm_replay_advance_bmp ==================== Link: https://lore.kernel.org/r/20210121121558.621339-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21mac80211: 160MHz with extended NSS BW in CSAShay Bar
Upon receiving CSA with 160MHz extended NSS BW from associated AP, STA should set the HT operation_mode based on new_center_freq_seg1 because it is later used as ccfs2 in ieee80211_chandef_vht_oper(). Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20201222064714.24888-1-shay.bar@celeno.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-20net: dsa: microchip: Adjust reset release timing to match reference reset ↵Marek Vasut
circuit KSZ8794CNX datasheet section 8.0 RESET CIRCUIT describes recommended circuit for interfacing with CPU/FPGA reset consisting of 10k pullup resistor and 10uF capacitor to ground. This circuit takes ~100 ms to rise enough to release the reset. For maximum supply voltage VDDIO=3.3V VIH=2.0V R=10kR C=10uF that is VDDIO - VIH t = R * C * -ln( ------------- ) = 10000*0.00001*-(-0.93)=0.093 s VDDIO so we need ~95 ms for the reset to really de-assert, and then the original 100us for the switch itself to come out of reset. Simply msleep() for 100 ms which fits the constraint with a bit of extra space. Fixes: 5b797980908a ("net: dsa: microchip: Implement recommended reset timing") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210120030502.617185-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: dsa: microchip: ksz8795: Fix KSZ8794 port map againMarek Vasut
The KSZ8795 switch has 4 external ports {0,1,2,3} and 1 CPU port {4}, so does the KSZ8765. The KSZ8794 seems to be repackaged KSZ8795 with different ID and port 3 not routed out, however the port 3 registers are present in the silicon, so the KSZ8794 switch has 3 external ports {0,1,2} and 1 CPU port {4}. Currently the driver always uses the last port as CPU port, on KSZ8795/KSZ8765 that is port 4 and that is OK, but on KSZ8794 that is port 3 and that is not OK, as it must also be port 4. This patch adjusts the driver such that it always registers a switch with 5 ports total (4 external ports, 1 CPU port), always sets the CPU port to switch port 4, and then configures the external port mask according to the switch model -- 3 ports for KSZ8794 and 4 for KSZ8795/KSZ8765. Fixes: 68a1b676db52 ("net: dsa: microchip: ksz8795: remove superfluous port_cnt assignment") Fixes: 4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt where possible") Fixes: 241ed719bc98 ("net: dsa: microchip: ksz8795: use port_cnt instead of TOTOAL_PORT_NUM") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210120001045.488506-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20Merge tag 'net-5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.11-rc5, including fixes from bpf, wireless, and can trees. Current release - regressions: - nfc: nci: fix the wrong NCI_CORE_INIT parameters Current release - new code bugs: - bpf: allow empty module BTFs Previous releases - regressions: - bpf: fix signed_{sub,add32}_overflows type handling - tcp: do not mess with cloned skbs in tcp_add_backlog() - bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach - bpf: don't leak memory in bpf getsockopt when optlen == 0 - tcp: fix potential use-after-free due to double kfree() - mac80211: fix encryption issues with WEP - devlink: use right genl user_ptr when handling port param get/set - ipv6: set multicast flag on the multicast route - tcp: fix TCP_USER_TIMEOUT with zero window Previous releases - always broken: - bpf: local storage helpers should check nullness of owner ptr passed - mac80211: fix incorrect strlen of .write in debugfs - cls_flower: call nla_ok() before nla_next() - skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too" * tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) net: systemport: free dev before on error path net: usb: cdc_ncm: don't spew notifications net: mscc: ocelot: Fix multicast to the CPU port tcp: Fix potential use-after-free due to double kfree() bpf: Fix signed_{sub,add32}_overflows type handling can: peak_usb: fix use after free bugs can: vxcan: vxcan_xmit: fix use after free bug can: dev: can_restart: fix use after free bug tcp: fix TCP socket rehash stats mis-accounting net: dsa: b53: fix an off by one in checking "vlan->vid" tcp: do not mess with cloned skbs in tcp_add_backlog() selftests: net: fib_tests: remove duplicate log test net: nfc: nci: fix the wrong NCI_CORE_INIT parameters sh_eth: Fix power down vs. is_opened flag ordering net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled netfilter: rpfilter: mask ecn bits before fib lookup udp: mask TOS bits in udp_v4_early_demux() xsk: Clear pool even for inactive queues bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback sh_eth: Make PHY access aware of Runtime PM to fix reboot crash ...
2021-01-20Merge tag 'for-linus-5.11-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A fix for build failure showing up in some configurations" * tag 'for-linus-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: fix 'nopvspin' build error
2021-01-20X.509: Fix crash caused by NULL pointerTianjia Zhang
On the following call path, `sig->pkey_algo` is not assigned in asymmetric_key_verify_signature(), which causes runtime crash in public_key_verify_signature(). keyctl_pkey_verify asymmetric_key_verify_signature verify_signature public_key_verify_signature This patch simply check this situation and fixes the crash caused by NULL pointer. Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification") Reported-by: Tobias Markus <tobias@markus-regensburg.de> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@redhat.com> Tested-by: João Fonseca <jpedrofonseca@ua.pt> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-20cachefiles: Drop superfluous readpages aops NULL checkTakashi Iwai
After the recent actions to convert readpages aops to readahead, the NULL checks of readpages aops in cachefiles_read_or_alloc_page() may hit falsely. More badly, it's an ASSERT() call, and this panics. Drop the superfluous NULL checks for fixing this regression. [DH: Note that cachefiles never actually used readpages, so this check was never actually necessary] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208883 BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175245 Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-20Merge tag 'linux-can-fixes-for-5.11-20210120' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== linux-can-fixes-for-5.11-20210120 All three patches are by Vincent Mailhol and fix a potential use after free bug in the CAN device infrastructure, the vxcan driver, and the peak_usk driver. In the TX-path the skb is used to read from after it was passed to the networking stack with netif_rx_ni(). * tag 'linux-can-fixes-for-5.11-20210120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: peak_usb: fix use after free bugs can: vxcan: vxcan_xmit: fix use after free bug can: dev: can_restart: fix use after free bug ==================== Link: https://lore.kernel.org/r/20210120125202.2187358-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: systemport: free dev before on error pathPan Bian
On the error path, it should goto the error handling label to free allocated memory rather than directly return. Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources") Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210120044423.1704-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: usb: cdc_ncm: don't spew notificationsGrant Grundler
RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: mscc: ocelot: Fix multicast to the CPU portAlban Bedel
Multicast entries in the MAC table use the high bits of the MAC address to encode the ports that should get the packets. But this port mask does not work for the CPU port, to receive these packets on the CPU port the MAC_CPU_COPY flag must be set. Because of this IPv6 was effectively not working because neighbor solicitations were never received. This was not apparent before commit 9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries) as the IPv6 entries were broken so all incoming IPv6 multicast was then treated as unknown and flooded on all ports. To fix this problem rework the ocelot_mact_learn() to set the MAC_CPU_COPY flag when a multicast entry that target the CPU port is added. For this we have to read back the ports endcoded in the pseudo MAC address by the caller. It is not a very nice design but that avoid changing the callers and should make backporting easier. Signed-off-by: Alban Bedel <alban.bedel@aerq.com> Fixes: 9403c158b872 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries") Link: https://lore.kernel.org/r/20210119140638.203374-1-alban.bedel@aerq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20tcp: Fix potential use-after-free due to double kfree()Kuniyuki Iwashima
Receiving ACK with a valid SYN cookie, cookie_v4_check() allocates struct request_sock and then can allocate inet_rsk(req)->ireq_opt. After that, tcp_v4_syn_recv_sock() allocates struct sock and copies ireq_opt to inet_sk(sk)->inet_opt. Normally, tcp_v4_syn_recv_sock() inserts the full socket into ehash and sets NULL to ireq_opt. Otherwise, tcp_v4_syn_recv_sock() has to reset inet_opt by NULL and free the full socket. The commit 01770a1661657 ("tcp: fix race condition when creating child sockets from syncookies") added a new path, in which more than one cores create full sockets for the same SYN cookie. Currently, the core which loses the race frees the full socket without resetting inet_opt, resulting in that both sock_put() and reqsk_put() call kfree() for the same memory: sock_put sk_free __sk_free sk_destruct __sk_destruct sk->sk_destruct/inet_sock_destruct kfree(rcu_dereference_protected(inet->inet_opt, 1)); reqsk_put reqsk_free __reqsk_free req->rsk_ops->destructor/tcp_v4_reqsk_destructor kfree(rcu_dereference_protected(inet_rsk(req)->ireq_opt, 1)); Calling kmalloc() between the double kfree() can lead to use-after-free, so this patch fixes it by setting NULL to inet_opt before sock_put(). As a side note, this kind of issue does not happen for IPv6. This is because tcp_v6_syn_recv_sock() clones both ipv6_opt and pktopts which correspond to ireq_opt in IPv4. Fixes: 01770a166165 ("tcp: fix race condition when creating child sockets from syncookies") CC: Ricardo Dias <rdias@singlestore.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210118055920.82516-1-kuniyu@amazon.co.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2021-01-20 1) Fix wrong bpf_map_peek_elem_proto helper callback, from Mircea Cirjaliu. 2) Fix signed_{sub,add32}_overflows type truncation, from Daniel Borkmann. 3) Fix AF_XDP to also clear pools for inactive queues, from Maxim Mikityanskiy. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix signed_{sub,add32}_overflows type handling xsk: Clear pool even for inactive queues bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback ==================== Link: https://lore.kernel.org/r/20210120163439.8160-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20bpf: Fix signed_{sub,add32}_overflows type handlingDaniel Borkmann
Fix incorrect signed_{sub,add32}_overflows() input types (and a related buggy comment). It looks like this might have slipped in via copy/paste issue, also given prior to 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") the signature of signed_sub_overflows() had s64 a and s64 b as its input args whereas now they are truncated to s32. Thus restore proper types. Also, the case of signed_add32_overflows() is not consistent to signed_sub32_overflows(). Both have s32 as inputs, therefore align the former. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: De4dCr0w <sa516203@mail.ustc.edu.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-01-20can: peak_usb: fix use after free bugsVincent Mailhol
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-20can: vxcan: vxcan_xmit: fix use after free bugVincent Mailhol
After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the canfd_frame cfd which aliases skb memory is accessed after the netif_rx_ni(). Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Link: https://lore.kernel.org/r/20210120114137.200019-3-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-20can: dev: can_restart: fix use after free bugVincent Mailhol
After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-19tcp: fix TCP socket rehash stats mis-accountingYuchung Cheng
The previous commit 32efcc06d2a1 ("tcp: export count for rehash attempts") would mis-account rehashing SNMP and socket stats: a. During handshake of an active open, only counts the first SYN timeout b. After handshake of passive and active open, stop updating after (roughly) TCP_RETRIES1 recurring RTOs c. After the socket aborts, over count timeout_rehash by 1 This patch fixes this by checking the rehash result from sk_rethink_txhash. Fixes: 32efcc06d2a1 ("tcp: export count for rehash attempts") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20210119192619.1848270-1-ycheng@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: dsa: b53: fix an off by one in checking "vlan->vid"Dan Carpenter
The > comparison should be >= to prevent accessing one element beyond the end of the dev->vlans[] array in the caller function, b53_vlan_add(). The "dev->vlans" array is allocated in the b53_switch_init() function and it has "dev->num_vlans" elements. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19tcp: do not mess with cloned skbs in tcp_add_backlog()Eric Dumazet
Heiner Kallweit reported that some skbs were sent with the following invalid GSO properties : - gso_size > 0 - gso_type == 0 This was triggerring a WARN_ON_ONCE() in rtl8169_tso_csum_v2. Juerg Haefliger was able to reproduce a similar issue using a lan78xx NIC and a workload mixing TCP incoming traffic and forwarded packets. The problem is that tcp_add_backlog() is writing over gso_segs and gso_size even if the incoming packet will not be coalesced to the backlog tail packet. While skb_try_coalesce() would bail out if tail packet is cloned, this overwriting would lead to corruptions of other packets cooked by lan78xx, sharing a common super-packet. The strategy used by lan78xx is to use a big skb, and split it into all received packets using skb_clone() to avoid copies. The drawback of this strategy is that all the small skb share a common struct skb_shared_info. This patch rewrites TCP gso_size/gso_segs handling to only happen on the tail skb, since skb_try_coalesce() made sure it was not cloned. Fixes: 4f693b55c3d2 ("tcp: implement coalescing on backlog queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Bisected-by: Juerg Haefliger <juergh@canonical.com> Tested-by: Juerg Haefliger <juergh@canonical.com> Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209423 Link: https://lore.kernel.org/r/20210119164900.766957-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19selftests: net: fib_tests: remove duplicate log testHangbin Liu
The previous test added an address with a specified metric and check if correspond route was created. I somehow added two logs for the same test. Remove the duplicated one. Reported-by: Antoine Tenart <atenart@redhat.com> Fixes: 0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: nfc: nci: fix the wrong NCI_CORE_INIT parametersBongsu Jeon
Fix the code because NCI_CORE_INIT_CMD includes two parameters in NCI2.0 but there is no parameters in NCI1.x. Fixes: bcd684aace34 ("net/nfc/nci: Support NCI 2.x initial sequence") Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Link: https://lore.kernel.org/r/20210118205522.317087-1-bongsu.jeon@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19sh_eth: Fix power down vs. is_opened flag orderingGeert Uytterhoeven
sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabledTariq Toukan
With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be logically done when RXCSUM offload is off. Fixes: 14136564c8ee ("net: Add TLS RX offload feature") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19Merge branch 'ipv4-ensure-ecn-bits-don-t-influence-source-address-validation'Jakub Kicinski
Guillaume Nault says: ==================== ipv4: Ensure ECN bits don't influence source address validation Functions that end up calling fib_table_lookup() should clear the ECN bits from the TOS, otherwise ECT(0) and ECT(1) packets can be treated differently. Most functions already clear the ECN bits, but there are a few cases where this is not done. This series only fixes the ones related to source address validation. ==================== Link: https://lore.kernel.org/r/cover.1610790904.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19netfilter: rpfilter: mask ecn bits before fib lookupGuillaume Nault
RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt() treats Not-ECT or ECT(1) packets in a different way than those with ECT(0) or CE. Reproducer: Create two netns, connected with a veth: $ ip netns add ns0 $ ip netns add ns1 $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11/32 dev veth10 Add a route to ns1 in ns0: $ ip -netns ns0 route add 192.0.2.11/32 dev veth01 In ns1, only packets with TOS 4 can be routed to ns0: $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS is 4: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 0% packet loss ... Now use iptable's rpfilter module in ns1: $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP Not-ECT and ECT(1) packets still pass: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... But ECT(0) and ECN packets are dropped: $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 100% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 100% packet loss ... After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore. Fixes: 8f97339d3feb ("netfilter: add ipv4 reverse path filter match") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19udp: mask TOS bits in udp_v4_early_demux()Guillaume Nault
udp_v4_early_demux() is the only function that calls ip_mc_validate_source() with a TOS that hasn't been masked with IPTOS_RT_MASK. This results in different behaviours for incoming multicast UDPv4 packets, depending on if ip_mc_validate_source() is called from the early-demux path (udp_v4_early_demux) or from the regular input path (ip_route_input_noref). ECN would normally not be used with UDP multicast packets, so the practical consequences should be limited on that side. However, IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align with the non-early-demux path behaviour. Reproducer: Setup two netns, connected with veth: $ ip netns add ns0 $ ip netns add ns1 $ ip -netns ns0 link set dev lo up $ ip -netns ns1 link set dev lo up $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10 In ns0, add route to multicast address 224.0.2.0/24 using source address 198.51.100.10: $ ip -netns ns0 address add 198.51.100.10/32 dev lo $ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10 In ns1, define route to 198.51.100.10, only for packets with TOS 4: $ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10 Also activate rp_filter in ns1, so that incoming packets not matching the above route get dropped: $ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1 Now try to receive packets on 224.0.2.11: $ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof - In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is, tos 6 for socat): $ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6 The "test0" message is properly received by socat in ns1, because early-demux has no cached dst to use, so source address validation is done by ip_route_input_mc(), which receives a TOS that has the ECN bits masked. Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0): $ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6 The "test1" message isn't received by socat in ns1, because, now, early-demux has a cached dst to use and calls ip_mc_validate_source() immediately, without masking the ECN bits. Fixes: bc044e8db796 ("udp: perform source validation for mcast early demux") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19xsk: Clear pool even for inactive queuesMaxim Mikityanskiy
The number of queues can change by other means, rather than ethtool. For example, attaching an mqprio qdisc with num_tc > 1 leads to creating multiple sets of TX queues, which may be then destroyed when mqprio is deleted. If an AF_XDP socket is created while mqprio is active, dev->_tx[queue_id].pool will be filled, but then real_num_tx_queues may decrease with deletion of mqprio, which will mean that the pool won't be NULLed, and a further increase of the number of TX queues may expose a dangling pointer. To avoid any potential misbehavior, this commit clears pool for RX and TX queues, regardless of real_num_*_queues, still taking into consideration num_*_queues to avoid overflows. Fixes: 1c1efc2af158 ("xsk: Create and free buffer pool independently from umem") Fixes: a41b4f3c58dd ("xsk: simplify xdp_clear_umem_at_qid implementation") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20210118160333.333439-1-maximmi@mellanox.com
2021-01-19Merge tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull task_work fix from Jens Axboe: "The TIF_NOTIFY_SIGNAL change inadvertently removed the unconditional task_work run we had in get_signal(). This caused a regression for some setups, since we're relying on eg ____fput() being run to close and release, for example, a pipe and wake the other end. For 5.11, I prefer the simple solution of just reinstating the unconditional run, even if it conceptually doesn't make much sense - if you need that kind of guarantee, you should be using TWA_SIGNAL instead of TWA_NOTIFY. But it's the trivial fix for 5.11, and would ensure that other potential gotchas/assumptions for task_work don't regress for 5.11. We're looking into further simplifying the task_work notifications for 5.12 which would resolve that too" * tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block: task_work: unconditionally run task_work from get_signal()
2021-01-19bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callbackMircea Cirjaliu
I assume this was obtained by copy/paste. Point it to bpf_map_peek_elem() instead of bpf_map_pop_elem(). In practice it may have been less likely hit when under JIT given shielded via 84430d4232c3 ("bpf, verifier: avoid retpoline for map push/pop/peek operation"). Fixes: f1a2e44a3aec ("bpf: add queue and stack maps") Signed-off-by: Mircea Cirjaliu <mcirjaliu@bitdefender.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Mauricio Vasquez <mauriciovasquezbernal@gmail.com> Link: https://lore.kernel.org/bpf/AM7PR02MB6082663DFDCCE8DA7A6DD6B1BBA30@AM7PR02MB6082.eurprd02.prod.outlook.com
2021-01-19Merge tag 'nfsd-5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Avoid exposing parent of root directory in NFSv3 READDIRPLUS results - Fix a tracepoint change that went in the initial 5.11 merge * tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Move the svc_xdr_recvfrom tracepoint again nfsd4: readdirplus shouldn't return parent of export
2021-01-19Merge tag 'hyperv-fixes-signed-20210119' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fix from Wei Liu: "One patch from Dexuan to fix clockevent initialization" * tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Initialize clockevents after LAPIC is initialized
2021-01-19Merge branch 'sh_eth-fix-reboot-crash'Jakub Kicinski
Geert Uytterhoeven says: ==================== sh_eth: Fix reboot crash This patch fixes a regression v5.11-rc1, where rebooting while a sh_eth device is not opened will cause a crash. Changes compared to v1: - Export mdiobb_{read,write}(), - Call mdiobb_{read,write}() now they are exported, - Use mii_bus.parent to avoid bb_info.dev copy, - Drop RFC state. Alternatively, mdio-bitbang could provide Runtime PM-aware wrappers itself, and use them either manually (through a new parameter to alloc_mdio_bitbang(), or a new alloc_mdio_bitbang_*() function), or automatically (e.g. if pm_runtime_enabled() returns true). Note that the latter requires a "struct device *" parameter to operate on. Currently there are only two drivers that call alloc_mdio_bitbang() and use Runtime PM: the Renesas sh_eth and ravb drivers. This series fixes the former, while the latter is not affected (it keeps the device powered all the time between driver probe and driver unbind, and changing that seems to be non-trivial). ==================== Link: https://lore.kernel.org/r/20210118150656.796584-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19sh_eth: Make PHY access aware of Runtime PM to fix reboot crashGeert Uytterhoeven
Wolfram reports that his R-Car H2-based Lager board can no longer be rebooted in v5.11-rc1, as it crashes with an imprecise external abort. The issue can be reproduced on other boards (e.g. Koelsch with R-Car M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is down at reboot time: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=422b6835, *pte=00000000, *ppte=00000000 Internal error: : 1406 [#1] ARM Modules linked in: CPU: 0 PID: 1105 Comm: init Tainted: G W 5.10.0-rc1-00402-ge2f016cf7751 #1048 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) PC is at sh_mdio_ctrl+0x44/0x60 LR is at sh_mmd_ctrl+0x20/0x24 ... Backtrace: [<c0451f30>] (sh_mdio_ctrl) from [<c0451fd4>] (sh_mmd_ctrl+0x20/0x24) r7:0000001f r6:00000020 r5:00000002 r4:c22a1dc4 [<c0451fb4>] (sh_mmd_ctrl) from [<c044fc18>] (mdiobb_cmd+0x38/0xa8) [<c044fbe0>] (mdiobb_cmd) from [<c044feb8>] (mdiobb_read+0x58/0xdc) r9:c229f844 r8:c0c329dc r7:c221e000 r6:00000001 r5:c22a1dc4 r4:00000001 [<c044fe60>] (mdiobb_read) from [<c044c854>] (__mdiobus_read+0x74/0xe0) r7:0000001f r6:00000001 r5:c221e000 r4:c221e000 [<c044c7e0>] (__mdiobus_read) from [<c044c9d8>] (mdiobus_read+0x40/0x54) r7:0000001f r6:00000001 r5:c221e000 r4:c221e458 [<c044c998>] (mdiobus_read) from [<c044d678>] (phy_read+0x1c/0x20) r7:ffffe000 r6:c221e470 r5:00000200 r4:c229f800 [<c044d65c>] (phy_read) from [<c044d94c>] (kszphy_config_intr+0x44/0x80) [<c044d908>] (kszphy_config_intr) from [<c044694c>] (phy_disable_interrupts+0x44/0x50) r5:c229f800 r4:c229f800 [<c0446908>] (phy_disable_interrupts) from [<c0449370>] (phy_shutdown+0x18/0x1c) r5:c229f800 r4:c229f804 [<c0449358>] (phy_shutdown) from [<c040066c>] (device_shutdown+0x168/0x1f8) [<c0400504>] (device_shutdown) from [<c013de44>] (kernel_restart_prepare+0x3c/0x48) r9:c22d2000 r8:c0100264 r7:c0b0d034 r6:00000000 r5:4321fedc r4:00000000 [<c013de08>] (kernel_restart_prepare) from [<c013dee0>] (kernel_restart+0x1c/0x60) [<c013dec4>] (kernel_restart) from [<c013e1d8>] (__do_sys_reboot+0x168/0x208) r5:4321fedc r4:01234567 [<c013e070>] (__do_sys_reboot) from [<c013e2e8>] (sys_reboot+0x18/0x1c) r7:00000058 r6:00000000 r5:00000000 r4:00000000 [<c013e2d0>] (sys_reboot) from [<c0100060>] (ret_fast_syscall+0x0/0x54) As of commit e2f016cf775129c0 ("net: phy: add a shutdown procedure"), system reboot calls phy_disable_interrupts() during shutdown. As this happens unconditionally, the PHY registers may be accessed while the device is suspended, causing undefined behavior, which may crash the system. Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by wrappers that take care of Runtime PM, to resume the device when needed. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19mdio-bitbang: Export mdiobb_{read,write}()Geert Uytterhoeven
Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers can call them from their MDIO read/write wrappers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19net: core: devlink: use right genl user_ptr when handling port param get/setOleksandr Mazur
Fix incorrect user_ptr dereferencing when handling port param get/set: idx [0] stores the 'struct devlink' pointer; idx [1] stores the 'struct devlink_port' pointer; Fixes: 637989b5d77e ("devlink: Always use user_ptr[0] for devlink and simplify post_doit") CC: Parav Pandit <parav@mellanox.com> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20210119085333.16833-1-vadym.kochan@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18tcp: fix TCP_USER_TIMEOUT with zero windowEnke Chen
The TCP session does not terminate with TCP_USER_TIMEOUT when data remain untransmitted due to zero window. The number of unanswered zero-window probes (tcp_probes_out) is reset to zero with incoming acks irrespective of the window size, as described in tcp_probe_timer(): RFC 1122 4.2.2.17 requires the sender to stay open indefinitely as long as the receiver continues to respond probes. We support this by default and reset icsk_probes_out with incoming ACKs. This counter, however, is the wrong one to be used in calculating the duration that the window remains closed and data remain untransmitted. Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the actual issue. In this patch a new timestamp is introduced for the socket in order to track the elapsed time for the zero-window probes that have not been answered with any non-zero window ack. Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT") Reported-by: William McCall <william.mccall@gmail.com> Co-developed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Enke Chen <enchen@paloaltonetworks.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18Merge branch 'ipv6-fixes-for-the-multicast-routes'Jakub Kicinski
Matteo Croce says: ==================== ipv6: fixes for the multicast routes Fix two wrong flags in the IPv6 multicast routes created by the autoconf code. ==================== Link: https://lore.kernel.org/r/20210115184209.78611-1-mcroce@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18ipv6: set multicast flag on the multicast routeMatteo Croce
The multicast route ff00::/8 is created with type RTN_UNICAST: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium Set the type to RTN_MULTICAST which is more appropriate. Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18ipv6: create multicast route with RTPROT_KERNELMatteo Croce
The ff00::/8 multicast route is created without specifying the fc_protocol field, so the default RTPROT_BOOT value is used: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium As the documentation says, this value identifies routes installed during boot, but the route is created when interface is set up. Change the value to RTPROT_KERNEL which is a better value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18Merge tag 'mac80211-for-net-2021-01-18.2' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes: * kernel-doc parsing fixes * incorrect debugfs string checks * locking fix in regulatory * some encryption-related fixes * tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: check if atf has been disabled in __ieee80211_schedule_txq mac80211: do not drop tx nulldata packets on encrypted links mac80211: fix encryption key selection for 802.3 xmit mac80211: fix fast-rx encryption check mac80211: fix incorrect strlen of .write in debugfs cfg80211: fix a kerneldoc markup cfg80211: Save the regulatory domain with a lock cfg80211/mac80211: fix kernel-doc for SAR APIs ==================== Link: https://lore.kernel.org/r/20210118204750.7243-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnextRasmus Villemoes
mv88e6xxx_port_vlan_join checks whether the VTU already contains an entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely changes the relevant .member[] element and loads the updated entry into the VTU. However, at least for the mv88e6250, the on-stack struct mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly initialized, neither in mv88e6xxx_port_vlan_join() nor inside the getnext implementation. So the new entry has random garbage for the STU bits, breaking VLAN filtering. When the VTU entry is initially created, those bits are all zero, and we should make sure to keep them that way when the entry is updated. Fixes: 92307069a96c (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net: mscc: ocelot: allow offloading of bridge on top of LAGVladimir Oltean
The blamed commit was too aggressive, and it made ocelot_netdevice_event react only to network interface events emitted for the ocelot switch ports. In fact, only the PRECHANGEUPPER should have had that check. When we ignore all events that are not for us, we miss the fact that the upper of the LAG changes, and the bonding interface gets enslaved to a bridge. This is an operation we could offload under certain conditions. Fixes: 7afb3e575e5a ("net: mscc: ocelot: don't handle netdev events for other netdevs") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210118135210.2666246-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18Merge tag 'spi-fix-v5.11-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few more bug fixes for SPI, both driver specific ones. The caching in the Cadence driver is to avoid a deadlock trying to retrieve the cached value later at runtime" * tag 'spi-fix-v5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: cadence: cache reference clock rate during probe spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode
2021-01-18Merge tag 'fixes-2021-01-18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull ia64 build fix from Mike Rapoport: "Fix an ia64 build failure caused by memory model changes" * tag 'fixes-2021-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ia64: fix build failure caused by memory model changes
2021-01-18Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "A Kconfig dependency issue with omap-sham and a divide by zero in xor on some platforms" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: omap-sham - Fix link error without crypto-engine crypto: xor - Fix divide error in do_xor_speed()
2021-01-18mt76: mt7663s: fix rx buffer refcountingLorenzo Bianconi
Similar to mt7601u driver, fix erroneous rx page refcounting Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/dca19c9d445156201bc41f7cbb6e894bbc9a678c.1610644945.git.lorenzo@kernel.org
2021-01-18mt7601u: fix rx buffer refcountingLorenzo Bianconi
Fix the following crash due to erroneous page refcounting: [ 32.445919] BUG: Bad page state in process swapper/1 pfn:11f65a [ 32.447409] page:00000000938f0632 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x11f65a [ 32.449605] flags: 0x8000000000000000() [ 32.450421] raw: 8000000000000000 ffffffff825b0148 ffffea00045ae988 0000000000000000 [ 32.451795] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 [ 32.452999] page dumped because: nonzero mapcount [ 32.453888] Modules linked in: [ 32.454492] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-rc2+ #1976 [ 32.455695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014 [ 32.457157] Call Trace: [ 32.457636] <IRQ> [ 32.457993] dump_stack+0x77/0x97 [ 32.458576] bad_page.cold+0x65/0x96 [ 32.459198] get_page_from_freelist+0x46a/0x11f0 [ 32.460008] __alloc_pages_nodemask+0x10a/0x2b0 [ 32.460794] mt7601u_rx_tasklet+0x651/0x720 [ 32.461505] tasklet_action_common.constprop.0+0x6b/0xd0 [ 32.462343] __do_softirq+0x152/0x46c [ 32.462928] asm_call_irq_on_stack+0x12/0x20 [ 32.463610] </IRQ> [ 32.463953] do_softirq_own_stack+0x5b/0x70 [ 32.464582] irq_exit_rcu+0x9f/0xe0 [ 32.465028] common_interrupt+0xae/0x1a0 [ 32.465536] asm_common_interrupt+0x1e/0x40 [ 32.466071] RIP: 0010:default_idle+0x18/0x20 [ 32.468981] RSP: 0018:ffffc90000077f00 EFLAGS: 00000246 [ 32.469648] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [ 32.470550] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81aac3dd [ 32.471463] RBP: ffff88810022ab00 R08: 0000000000000001 R09: 0000000000000001 [ 32.472335] R10: 0000000000000046 R11: 0000000000005aa0 R12: 0000000000000000 [ 32.473235] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 32.474139] ? default_idle_call+0x4d/0x200 [ 32.474681] default_idle_call+0x74/0x200 [ 32.475192] do_idle+0x1d5/0x250 [ 32.475612] cpu_startup_entry+0x19/0x20 [ 32.476114] secondary_startup_64_no_verify+0xb0/0xbb [ 32.476765] Disabling lock debugging due to kernel taint Fixes: c869f77d6abb ("add mt7601u driver") Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/62b2380c8c2091834cfad05e1059b55f945bd114.1610643952.git.lorenzo@kernel.org
2021-01-18x86/xen: fix 'nopvspin' build errorRandy Dunlap
Fix build error in x86/xen/ when PARAVIRT_SPINLOCKS is not enabled. Fixes this build error: ../arch/x86/xen/smp_hvm.c: In function ‘xen_hvm_smp_init’: ../arch/x86/xen/smp_hvm.c:77:3: error: ‘nopvspin’ undeclared (first use in this function) nopvspin = true; Fixes: 3d7746bea925 ("x86/xen: Fix xen_hvm_smp_init() when vector callback not available") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210115191123.27572-1-rdunlap@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 23:52:30 +0000