| Age | Commit message (Collapse) | Author |
|---|
|
This is a snapshot of the stable clk branch at
git://git.linaro.org/people/mturquette/linux.git clk-for-3.10
which is a dependency for the tegra clock changes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is a dependency for the tegra/clk branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Conflicts:
drivers/clocksource/tegra20_timer.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
From Tony Lindgren <tony@atomide.com>:
GPMC updates from Jon Hunter <jon-hunter@ti.com>:
Adds GPMC (General Purpose Memory Controller) DT support for
NOR flash and Ethernet and includes various GPMC cleans-up
and fixes.
This series is dependent on commit 7185684 (ARM: OMAP: use
consistent error checking) from RMK's clean-up branch and commit
31d9adc (ARM: OMAP2+: Fix broken gpmc support).
* tag 'omap-for-v3.10/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits)
ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
ARM: OMAP2+: rename gpmc_probe_nor_child() to gpmc_probe_generic_child()
ARM: OMAP2+: return -ENODEV if GPMC child device creation fails
ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping fails
ARM: OMAP2+: Remove unnecesssary GPMC definitions and variable
ARM: OMAP2+: Detect incorrectly aligned GPMC base address
ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT
ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT
ARM: OMAP2+: Add device-tree support for NOR flash
ARM: OMAP2+: Add additional GPMC timing parameters
ARM: OMAP2+: Add function to read GPMC settings from device-tree
ARM: OMAP2+: Don't configure of chip-select options in gpmc_cs_configure()
ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()
ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()
ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings()
ARM: OMAP2+: Convert ONENAND to use gpmc_cs_program_settings()
ARM: OMAP2+: Add function for configuring GPMC settings
ARM: OMAP2+: Add structure for storing GPMC settings
ARM: OMAP2+: Add variable to store number of GPMC waitpins
ARM: OMAP2+: Simplify code configuring ONENAND devices
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
From Tony Lindgren <tony@atomide.com>:
Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>:
This series consists mainly of clean-ups for clockevents and
clocksource timers on OMAP2+ devices. The most significant change
in functionality comes from the 5th patch which is changing the
selection of the clocksource timer for OMAP3 and AM335x devices
when gptimers are used for clocksource.
Note that this series depends on 7185684 (ARM: OMAP: use
consistent error checking) in RMK's tree and 960cba6 (ARM:
OMAP5: timer: Update the clocksource name as per clock data)
in omap-for-v3.10/fixes-non-critical. So this branch is based
on a merge of 7185684 and omap-for-v3.10/fixes-non-critical
to avoid non-trivial merge conflicts.
* tag 'omap-for-v3.10/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4+: Fix sparse warning in system timers
ARM: OMAP2+: Store ID of system timers in timer structure
ARM: OMAP3: Update clocksource timer selection
ARM: OMAP2+: Simplify system timers definitions
ARM: OMAP2+: Simplify system timer clock definitions
ARM: OMAP2+: Remove hard-coded test on timer ID
ARM: OMAP2+: Display correct system timer name
ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass
ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0
ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag
ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk
ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
From Tony Lindgren <tony@atomide.com>:
EHCI platform data related changes for v3.10 merge window.
These are needed for the USB PHY support, and are based on
commit 1f0972f5 from Felipe Balbi's tree as agreed on the
mailing lists.
* tag 'omap-for-v3.10/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
ARM: dts: omap3-beagle: Add USB Host support
ARM: dts: OMAP3: Add HS USB Host IP nodes
ARM: dts: OMAP4: Add HS USB Host IP nodes
ARM: OMAP: zoom: Adapt to ehci-omap changes
ARM: OMAP3: overo: Adapt to ehci-omap changes
ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes
ARM: OMAP3: omap3stalker: Adapt to ehci-omap changes
ARM: OMAP3: omap3pandora: Adapt to ehci-omap changes
ARM: OMAP3: omap3evm: Adapt to ehci-omap changes
ARM: OMAP3: igep0020: Adapt to ehci-omap changes
ARM: OMAP: devkit8000: Adapt to ehci-omap changes
ARM: OMAP3: cm-t3517: Adapt to ehci-omap changes
ARM: OMAP3: cm-t35: Adapt to ehci-omap changes
ARM: OMAP: AM3517evm: Adapt to ehci-omap changes
ARM: OMAP: AM3517crane: Adapt to ehci-omap changes
ARM: OMAP3: 3630SDP: Adapt to ehci-omap changes
ARM: OMAP3: 3430SDP: Adapt to ehci-omap changes
ARM: OMAP3: Beagle: Adapt to ehci-omap changes
ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes
ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys()
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
next/drivers
From Michal Simek <michal.simek@xilinx.com>:
* 'zynq/clksrc/cleanup' of git://git.xilinx.com/linux-xlnx:
arm: zynq: Move timer to generic location
arm: zynq: Do not use xilinx specific function names
arm: zynq: Move timer to clocksource interface
arm: zynq: Use standard timer binding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
next/drivers
From Tony Prisk <linux@prisktech.co.nz>:
arm: vt8500: Add pinctrl driver for arch-vt8500
This series adds support for the pinctrl/gpio module on all arch-vt8500
supported SoCs.
As part of the review process, some tidy up is also done to
drivers/of/base.c to remove some code that is being constantly duplicated.
Also, a patch for the bcm2835 pinctrl driver is included to take advantage
of the new of/base.c code.
* tag 'vt8500/pinctrl' of git://server.prisktech.co.nz/git/linuxwmt: (606 commits)
pinctrl: bcm2835: make use of of_property_read_u32_index()
gpio: vt8500: Remove arch-vt8500 gpio driver
arm: vt8500: Remove gpio devicetree nodes
arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver
pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500
arm: vt8500: Increase available GPIOs on arch-vt8500
of: Remove duplicated code for validating property and value
of: Add support for reading a u32 from a multi-value property.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
From Simon Horman <horms+renesas@verge.net.au>:
Update for Renesas INTC External IRQ pin driver for v3.10
This adds support for shared interrupt lines to the
Renesas INTC External IRQ pin driver which has already
been queued up for v3.10 (tag renesas-intc-external-irq-for-v3.10).
* tag 'renesas-intc-external-irq2-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
irqchip: intc-irqpin: Add support for shared interrupt lines
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
into omap-for-v3.10/gpmc
|
|
Move zynq timer out of mach folder to generic location
and enable it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
Remove all xilinx specific names from the driver
because this is generic driver for cadence ttc.
xttc->ttc
ttcps->ttc
...
No functional changes in this driver.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
Use clocksource timer initialization.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
Use cdns,ttc because this driver is Cadence Rev06
Triple Timer Counter and everybody can use it
without xilinx specific function name or probing.
Also use standard dt description for timer
and also prepare for moving to clocksource
initialization.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
Use the new standard API of_property_read_u32_index() instead of open-
coding it.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
|
|
With the move to a combined pinctrl/gpio driver, the arch-vt8500
gpio driver is no longer required.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Remove the gpio related devicetree nodes as these are no longer required
with the move to a combined pinctrl/gpio driver.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This patch adds pinctrl nodes to the VIA VT8500 and Wondermedia SoC dtsi
files to support the pinctrl driver.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This patch adds support for the GPIO/pinmux controller found on the VIA
VT8500 and Wondermedia WM8xxx-series SoCs.
Each pin within the controller is capable of operating as a GPIO or as
an alternate function. The pins are numbered according to their control
bank/bit so that if new pins are added, the existing numbering is maintained.
All currently supported SoCs are included: VT8500, WM8505, WM8650, WM8750 and
WM8850.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
With the inclusion of the pin control driver, more GPIO pins have been
identified on the arch-vt8500 SoCs requiring an increase in the available
GPIOs.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Several functions in of/base.c have the same code duplicated for
finding and validating a property and value.
struct property *prop = of_find_property(np, propname, NULL);
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
if (<some length> > prop->length)
return -EOVERFLOW;
This patch adds of_find_property_value_of_size() which performs the
equivalent of the above code and removes the instances where it was
duplicated in several functions.
Reported-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
|
|
This patch adds an of_property_read_u32_index() function to allow
reading a single indexed u32 value from a property containing multiple
u32 values.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robherring2@gmail.com>
|
|
Besides being used to interface with external memory devices,
the General-Purpose Memory Controller can be used to connect
Pseudo-SRAM devices such as ethernet controllers to OMAP2+
processors using the TI GPMC as a data bus.
This patch allows an ethernet chip to be defined as an GPMC
child device node.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
|
|
The gpmc_probe_nor_child() function is used in the GPMC driver to
configure the GPMC for a NOR child device node.
But this function is quite generic and all the NOR specific configuration
is made by the driver of the actual NOR flash memory used.
Other Pseudo-SRAM devices such as ethernet controllers need a similar
setup so by making this function generic it can be used for those too.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
|
|
gpmc_probe_nor_child() calls of_platform_device_create() to create a
platform device for the NOR child. If this function fails the value
of ret is returned to the caller but this value is zero since it was
assigned the return of a previous call to gpmc_cs_program_settings()
that had to succeed or otherwise gpmc_probe_nor_child() would have
returned before.
This means that if of_platform_device_create() fails, 0 will be returned
to the caller instead of an appropriate error code.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
|
|
When the GPMC driver is probed, we call gpmc_mem_init() to see which
chip-selects have already been configured and enabled by the boot-loader
and allocate space for them. If we fail to allocate space for one
chip-select, then we return failure from the probe and the GPMC driver
will not be available.
Rather than render the GPMC useless for all GPMC devices, if we fail to
allocate space for one chip-select print a warning and disable the
chip-select. This way other GPMC clients can still be used.
There is no downside to this approach, because all GPMC clients need to
request a chip-select before they can use the GPMC and on requesting a
chip-select, if memory has not already been reserved for the chip-select
then it will be.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
|
|
With commit 21cc2bd (ARM: OMAP2+: Remove apollon board support) the
variable "boot_rom_space" is now not needed and the code surrounding
this variable can be cleaned up and simplified. Remove unnecessary
definitions and clean-up the comment as well.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
|
|
Each GPMC chip-select can be configured to map 16MB, 32MB, 64MB or 128MB
of address space. The physical base address where a chip-select starts
is also configurable and must be aligned on a boundary that is equal to
or greater than the size of the address space mapped bt the chip-select.
When enabling a GPMC chip-select, ensure that the base address is aligned
to the appropriate boundary.
Reported-by: Mark Jackson <mpfj-list@mimc.co.uk>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
|
|
When booting with device-tree, retrieve GPMC settings for ONENAND from
the device-tree blob. This will allow us to remove all static settings
stored in the gpmc-nand.c in the future once the migration to
device-tree is complete.
The user must now specify the ONENAND device width in the device-tree
binding so that the GPMC can be programmed correctly. Therefore, update
the device-tree binding documentation for ONENAND devices connected to
the GPMC to reflect this.
Please note that this does not include GPMC timings for ONENAND. The
timings are being calculated at runtime.
There is some legacy code that only enables read wait monitoring for
non-OMAP3 devices. There are no known OMAP3 device issues that prevent
this feature being enabled and so when booting with device-tree use the
wait-monitoring settings described in the device-tree blob.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
|
|
When booting with device-tree, retrieve GPMC settings for NAND from
the device-tree blob. This will allow us to remove all static settings
stored in the gpmc-nand.c in the future once the migration to
device-tree is complete.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
|
|
NOR flash is not currently supported when booting with device-tree
on OMAP2+ devices. Add support to detect and configure NOR devices
when booting with device-tree.
Add documentation for the TI GPMC NOR binding.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
|
|
Some of the GPMC timings parameters are currently missing from the GPMC
device-tree binding. Add these parameters to the binding documentation
as well as code to read them. Also add either "-ps" or "-ns" suffix to
the GPMC timing properties to indicate whether the timing is in
picoseconds or nanoseconds.
The existing code in gpmc_read_timings_dt() is checking the value of
of_property_read_u32() and only is successful storing the value read
in the gpmc_timings structure. Checking the return value in this case
is not necessary and we can simply read the value, if present, and
store directly in the gpmc_timings structure. Therefore, simplify the
code by removing these checks.
The comment in the gpmc_read_timings_dt() function, "only for OMAP3430"
is also incorrect as it is applicable to all OMAP3+ devices. So correct
this too.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
|
|
After the patch series for system suspending support, tegra_idle_lp2_last()
no longer uses its parameters cpu_on_time or cpu_off_time, so remove them.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
Adding suspend to RAM support for Tegra platform. There are three suspend
mode for Tegra. The difference were below.
* LP2: CPU voltage off
* LP1: CPU voltage off, DRAM in self-refresh
* LP0: CPU + Core voltage off, DRAM in self-refresh
After this patch, the LP2 suspend mode will be supported.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
The PMC mostly controls the entry and exit of the system from different
sleep modes. Different platform or system may have different configurations.
The power management configurations of PMC is represented as some properties.
The system needs to define the properties when the system supports deep sleep
mode (i.e. suspend).
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
Add the wake up handling for legacy irq controller, and using
IRQCHIP_MASK_ON_SUSPEND for wake irq handling.
Based on the work by:
Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
This patch add the gpio wakeup source handling for the Tegra platform. It
was be done by enabling the irq for the gpio in the gpio controller and
enabling the bank irq of the gpio in the Tegra legacy irq controller when
the system going to suspend.
Based on the work by:
Varun Wadekar <vwadekar@nvidia.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
The CPU power timer set up function was related to PMC register. Now moving
it to PMC driver. And it also help to clean up the PM related code later.
The timer was calculated based on the input clock of PMC. In this patch, we
also get the clock from DT.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
Adding the bindings of the clock source of PMC in DT.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
|
omap-for-v3.10/timer
Conflicts:
arch/arm/mach-omap2/timer.c
|
|
Conflicts:
arch/arm/plat-omap/dmtimer.c
Resolve merge conflict in omap_device.c as per
Lothar Waßmann <LW@KARO-electronics.de>.
|
|
Reentrancy into the clock framework is necessary for clock operations
that result in nested calls to the clk api. A common example is a clock
that is prepared via an i2c transaction, such as a clock inside of a
discrete audio chip or a power management IC. The i2c subsystem itself
will use the clk api resulting in a deadlock:
clk_prepare(audio_clk)
i2c_transfer(..)
clk_prepare(i2c_controller_clk)
The ability to reenter the clock framework prevents this deadlock.
Other use cases exist such as allowing .set_rate callbacks to call
clk_set_parent to achieve the best rate, or to save power in certain
configurations. Yet another example is performing pinctrl operations
from a clk_ops callback. Calls into the pinctrl subsystem may call
clk_{un}prepare on an unrelated clock. Allowing for nested calls to
reenter the clock framework enables both of these use cases.
Reentrancy is implemented by two global pointers that track the owner
currently holding a global lock. One pointer tracks the owner during
sleepable, mutex-protected operations and the other one tracks the owner
during non-interruptible, spinlock-protected operations.
When the clk framework is entered we try to hold the global lock. If it
is held we compare the current task against the current owner; a match
implies a nested call and we reenter. If the values do not match then
we block on the lock until it is released.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Cc: David Brown <davidb@codeaurora.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Create locking helpers for the global mutex and global spinlock. The
definitions of these helpers will be expanded upon in the next patch
which introduces reentrancy into the locking scheme.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Cc: David Brown <davidb@codeaurora.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Provide RESET and Power regulators for the USB PHY,
the USB Host port mode and the PHY device.
Also provide pin multiplexer information for USB host
pins.
CC: Benoît Cousson <b-cousson@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Adds device nodes for HS USB Host module, TLL module,
OHCI and EHCI controllers.
CC: Benoît Cousson <b-cousson@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Adds device nodes for HS USB Host module, TLL module,
OHCI and EHCI controllers.
CC: Benoît Cousson <b-cousson@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Use usbhs_init_phys() to register the PHY's RESET regulator
and the NOP PHY device.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Use usbhs_init_phys() to register the PHY's RESET regulator
and the NOP PHY device.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Use usbhs_init_phys() to register the PHY's RESET regulator
and the NOP PHY device.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Use usbhs_init_phys() to register the PHY's RESET regulator
and the NOP PHY device.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
