summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-05-21Blackfin arch: update blackfin header files to latest one in VDSP.Bryan Wu
a) add new processor BF52x/BF54x header files b) update blackfin BF533/BF537/BF561 header files to latest one in VDSP. c) scrub watchdog/rtc masks from headers as we dont need/want them (too generic and the drivers dont use them) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: make sure we use local labelsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: dont clear the bit that tells coreb to start bootingMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: dma_memcpy borken for > 64KAubrey Li
Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: document why we have to touch the UART peripheral in our boot ↵Mike Frysinger
up code Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: issue reset via SWRST so we dont clobber the watchdog stateMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: move board specific setup out of common init code and into ↵Mike Frysinger
the board specific init code Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: finish removing p* volatile defines for MMRsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: dont clear status register bits in SWRST so we can actually ↵Mike Frysinger
use it Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: make sure we declare the revid functions as pure (since they are)Mike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: initial tepla-bf561 board supportMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: Fix bug using usb keyboard crashes kernelMichael Hennerich
Without conswitchp preset, we have the following situation: - During initcalls: con_init is called, and returns because of !display_desc. - At this point there is no memory allocated for vc_cons[].d A bit later vty_init calls kbd_init. - From now on events are passed to kbd_event which will then call kbd_keycode. - kbd_keycode will oops on a NULL pointer dereference on vc->vc_tty Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Bryan Wu <bryan.wu@analog.com> [ Added commit description based on email thread. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: fix trace output for FLAT binariesMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: GPIO fix some definesMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: DMA operation cleanupMichael Hennerich
1) Disable Interrupts during DMA memcpy to avoid raise conditions. 2) Mark MDMA channel 0 as reserved, since were using it internally. 3) Add DMA based equivalents for insX and outsX. 4) Our insX and outsX only handles len <= 2^16. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: Move write to VR_CTL closer to IDLEMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: Fix reserved map after we changed PORT_H definitionMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: mark a bunch of local functions as staticMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: Add configuration data for ISP176x on BF561Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: fix a few random warningsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: ISP1761 doesn't work for USB flash diskAubrey Li
ZONE_DMA is required for some drivers subsystem, such as USB/SCSI. Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: add SPI MMC driver support on bf533-stamp, tested on STAMP-BF533Bryan Wu
Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Blackfin arch: Add Workaround for ANOMALY 05000257Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Detach sched.h from mm.hAlexey Dobriyan
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Fix "fs: convert core functions to zero_user_page"OGAWA Hirofumi
The bug was introduced by 01f2705daf5a36208e69d7cf95db9c330f843af6. It misses to convert the first argument, it should be "new_page". This became a cause of fatfs corruption. Cc: Nate Diller <nate.diller@gmail.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Merge master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] api: Read module pointer before freeing algorithm
2007-05-21[S390] More verbose show_mem() like other architectures.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-21[S390] Make use of kretprobe_assert.Heiko Carstens
s390 change for git commit 0f95b7fc839bc3272b1bf2325d8748a649bd3534. That is print kprobes debug data before BUG(). Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-21[S390] Wire up signald, timerfd and eventfd syscalls.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-21[S390] Wire up sys_utimensat.Heiko Carstens
Wire up sys_utimensat, reserve syscall number for sys_fallocate and add a couple of syscalls to the ignore list to get rid of warings. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-21[S390] cio: Update documentation.Cornelia Huck
- read_dev_chars()/read_conf_data() are deprecated. Don't document them, but advise to issue the channel program from the driver itself. - Remove some really obsolete and incorrect stuff. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-20IB/mlx4: Check if SRQ is full when posting receiveRoland Dreier
Make mlx4_post_srq_recv() fail if the SRQ is full (head == tail). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-20[ARM] spelling fixesSimon Arlott
Spelling fixes in arch/arm/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] at91_adc parenthesis balanceMariusz Kozlowski
Trivial unbalanced parenthesis macro fix. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4400/1: S3C24XX: Add high-speed MMC device definitionBen Dooks
Add definition for high-speed MMC/SD device and add to SMDK2443 device list. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4399/2: S3C2443: Fix SMDK2443 nand timingsBen Dooks
Reduce the Twrph0 timing slightly to fit on an SMDK2443. This should still produce valid timings for the NAND devices as it is still over the smallest device fitted to these boards. Signed-off-by: Ben Dooks <(address hidden)> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4398/1: S3C2443: Fix watchdog IRQ numberBen Dooks
Fix the IRQ number for watchdog on S3C2443 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4397/1: S3C2443: remove SDI0/1 IRQ ambiguityBen Dooks
Change the name of the S3C2443_SDI1 to S3C2443_HSMMC to ensure that it is correctly identified. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4396/1: S3C2443: Add missing HCLK clocksBen Dooks
Add the clocks missing form HCLKCON back into the set of clocks being registered at initalisation time. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4395/1: S3C24XX: add include of <linux/sysdev.h> to relevant machinesBen Dooks
Include <linux/sysdev.h> in any machines that use the PM functions which require struct sys_device. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4388/1: no need for arm/mm mmap range checks for non-mmuGreg Ungerer
We don't need valid_phys_addr_range() or valid_mmap_phys_addr_range() for the !CONFIG_MMU case. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] 4387/1: fix /proc/cpuinfo formatting for pre-ARM7 partsGreg Ungerer
Fix the formating of the "CPU part" field to be consistent with the other fields for pre-ARM7 parts. One tab to many for them to all line up. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20IB/mlx4: Pass send queue sizes from userspace to kernelEli Cohen
Pass the number of WQEs for the send queue and their size from userspace to the kernel to avoid having to keep the QP size calculations in sync between the kernel driver and libmlx4. This fixes a bug seen with the current mlx4_ib driver and current libmlx4 caused by a difference in the calculated sizes for SQ WQEs. Also, this gives more flexibility for userspace to experiment with using multiple WQE BBs for a single SQ WQE. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-19[NET]: Fix race condition about network device name allocation.Stephen Hemminger
Kenji Kaneshige found this race between device removal and registration. On unregister it is possible for the old device to exist, because sysfs file is still open. A new device with 'eth%d' will select the same name, but sysfs kobject register will fial. The following changes the shutdown order slightly. It hold a removes the sysfs entries earlier (on unregister_netdevice), but holds a kobject reference. Then when todo runs the actual last put free happens. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-19[IPV4]: icmp: fix crash with sysctl_icmp_errors_use_inbound_ifaddrPatrick McHardy
When icmp_send is called on the local output path before the packet hits ip_output, skb->dev is not set, causing a crash when sysctl_icmp_errors_use_inbound_ifaddr is set. This can happen with the netfilter REJECT target or IPsec tunnels. Let routing decide the ICMP source address in that case, since the packet is locally generated there is no inbound interface and the sysctl should not apply. The option actually seems to be unfixable broken, on the path after ip_output() skb->dev points to the outgoing device and we don't know the incoming device anymore, so its going to do the absolute wrong thing and pick the address of the outgoing interface. Add a comment about this. Reported by Curtis Doty <Curtis@GreenKey.net>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-19[NETFILTER]: nf_conntrack_ipv4: fix incorrect #ifdef config namePatrick McHardy
The option is named CONFIG_NF_NAT not CONFIG_IP_NF_NAT. Remove the ifdef completely since helpers also expect defragmented packet even without NAT. Noticed by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-19[NETFILTER]: nf_conntrack: fix use-after-free in helper destroy callback ↵Patrick McHardy
invocation When the helper module is removed for a master connection that has a fulfilled expectation, but has already timed out and got removed from the hash tables, nf_conntrack_helper_unregister can't find the master connection to unset the helper, causing a use-after-free when the expected connection is destroyed and releases the last reference to the master. The helper destroy callback was introduced for the PPtP helper to clean up expectations and expected connections when the master connection times out, but doing this from destroy_conntrack only works for unfulfilled expectations since expected connections hold a reference to the master, preventing its destruction. Move the destroy callback to the timeout function, which fixes both problems. Reported/tested by Gabor Burjan <buga@buvoshetes.hu>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-19[IPSEC] pfkey: Load specific algorithm in pfkey_add rather than allHerbert Xu
This is a natural extension of the changeset [XFRM]: Probe selected algorithm only. which only removed the probe call for xfrm_user. This patch does exactly the same thing for af_key. In other words, we load the algorithm requested by the user rather than everything when adding xfrm states in af_key. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-19[TCP] FRTO: Prevent state inconsistency in corner casesIlpo Järvinen
State could become inconsistent in two cases: 1) Userspace disabled FRTO by tuning sysctl when one of the TCP flows was in the middle of FRTO algorithm (and then RTO is again triggered) 2) SACK reneging occurs during FRTO algorithm A simple solution is just to abort the previous FRTO when such obscure condition occurs... Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-19[TCP] FRTO: Add missing ECN CWR sending to one of the responsesIlpo Järvinen
The conservative spurious RTO response did not queue CWR even though the sending rate was lowered. Whenever reduction happens regardless of reason, CWR should be sent (forgetting to send it is not very fatal though). A better approach would be to queue CWR when one of the sending rate reducing responses (rate-halving one or this conservative response) is used already at RTO. Doing that would allow CWR to be sent along with the two new data segments that are sent during FRTO. However, it's a bit "racy" because userland could tune the response sysctl to a more aggressive one in between. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 07:26:04 +0000