summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-09drivers/net: caif: fix wrong rtnl_is_locked() usageKonstantin Khlebnikov
rtnl_is_locked() doesn't check who holds this lock, it just tells that it's locked right now. if caif::ldisc_close really can be called under rtrnl_lock then it should release net device in other context because there is no way to grab rtnl_lock without deadlock. This patch adds work which releases these devices. Also this patch fixes calling dev_close/unregister_netdevice without rtnl_lock from caif_ser_exit(). Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09drivers/net: enic: release rtnl_lock on error-pathKonstantin Khlebnikov
enic_change_mtu_work() must call rtnl_unlock() on all exiting paths. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Christian Benvenuti <benve@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09vhost-net: fix use-after-free in vhost_net_flushMichael S. Tsirkin
vhost_net_ubuf_put_and_wait has a confusing name: it will actually also free it's argument. Thus since commit 1280c27f8e29acf4af2da914e80ec27c3dbd5c01 "vhost-net: flush outstanding DMAs on memory change" vhost_net_flush tries to use the argument after passing it to vhost_net_ubuf_put_and_wait, this results in use after free. To fix, don't free the argument in vhost_net_ubuf_put_and_wait, add an new API for callers that want to free ubufs. Acked-by: Asias He <asias@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09net: mv643xx_eth: do not use port number as platform device idJonas Gorski
The port number is only local to the ethernet block, not global, so there can be two ethernet blocks both using the same port, like kirkwood with both using port 0. Fix this by using the array index offset for the allocated platform devices as the id. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09net: sctp: confirm route during forward progressDaniel Borkmann
This fix has been proposed originally by Vlad Yasevich. He says: When SCTP makes forward progress (receives a SACK that acks new chunks, renegs, or answeres 0-window probes) or when HB-ACK arrives, mark the route as confirmed so we don't unnecessarily send NUD probes. Having a simple SCTP client/server that exchange data chunks every 1sec, without this patch ARP requests are sent periodically every 40-60sec. With this fix applied, an ARP request is only done once right at the "session" beginning. Also, when clearing the related ARP cache entry manually during the session, a new request is correctly done. I have only "backported" this to net-next and tested that it works, so full credit goes to Vlad. Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09virtio_net: fix race in RX VQ processingDavid S. Miller
Michael S. Tsirkin says: ==================== Jason Wang reported a race in RX VQ processing: virtqueue_enable_cb is called outside napi lock, violating virtio serialization rules. The race has been there from day 1, but it got especially nasty in 3.0 when commit a5c262c5fd83ece01bd649fb08416c501d4c59d7 "virtio_ring: support event idx feature" added more dependency on vq state. Please review, and consider for 3.11 and stable. Changes from v1: - Added Jason's Tested-by tag - minor coding style fix ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09virtio_net: fix race in RX VQ processingMichael S. Tsirkin
virtio net called virtqueue_enable_cq on RX path after napi_complete, so with NAPI_STATE_SCHED clear - outside the implicit napi lock. This violates the requirement to synchronize virtqueue_enable_cq wrt virtqueue_add_buf. In particular, used event can move backwards, causing us to lose interrupts. In a debug build, this can trigger panic within START_USE. Jason Wang reports that he can trigger the races artificially, by adding udelay() in virtqueue_enable_cb() after virtio_mb(). However, we must call napi_complete to clear NAPI_STATE_SCHED before polling the virtqueue for used buffers, otherwise napi_schedule_prep in a callback will fail, causing us to lose RX events. To fix, call virtqueue_enable_cb_prepare with NAPI_STATE_SCHED set (under napi lock), later call virtqueue_poll with NAPI_STATE_SCHED clear (outside the lock). Reported-by: Jason Wang <jasowang@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09virtio: support unlocked queue pollMichael S. Tsirkin
This adds a way to check ring empty state after enable_cb outside any locks. Will be used by virtio_net. Note: there's room for more optimization: caller is likely to have a memory barrier already, which means we might be able to get rid of a barrier here. Deferring this optimization until we do some benchmarking. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bitJongsung Kim
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09Documentation: Fix references to defunct linux-net@vger.kernel.orgGeert Uytterhoeven
linux-net@vger.kernel.org was replaced by netdev@oss.sgi.com was replaced by netdev@vger.kernel.org. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09net/fs: change busy poll time accountingEliezer Tamir
Suggested by Linus: Changed time accounting for busy-poll: - Make it microsecond based. - Use unsigned longs. - Revert back to use time_after instead of time_in_range. Reorder poll/select busy loop conditions: - Clear busy_flag after one time we can't busy-poll. - Only init busy_end if we actually are going to busy-poll. Added one more missing need_resched() test. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-08net: rename low latency sockets functions to busy pollEliezer Tamir
Rename functions in include/net/ll_poll.h to busy wait. Clarify documentation about expected power use increase. Rename POLL_LL to POLL_BUSY_LOOP. Add need_resched() testing to poll/select busy loops. Note, that in select and poll can_busy_poll is dynamic and is updated continuously to reflect the existence of supported sockets with valid queue information. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-06bridge: fix some kernel warning in multicast timerCong Wang
Several people reported the warning: "kernel BUG at kernel/timer.c:729!" and the stack trace is: #7 [ffff880214d25c10] mod_timer+501 at ffffffff8106d905 #8 [ffff880214d25c50] br_multicast_del_pg.isra.20+261 at ffffffffa0731d25 [bridge] #9 [ffff880214d25c80] br_multicast_disable_port+88 at ffffffffa0732948 [bridge] #10 [ffff880214d25cb0] br_stp_disable_port+154 at ffffffffa072bcca [bridge] #11 [ffff880214d25ce8] br_device_event+520 at ffffffffa072a4e8 [bridge] #12 [ffff880214d25d18] notifier_call_chain+76 at ffffffff8164aafc #13 [ffff880214d25d50] raw_notifier_call_chain+22 at ffffffff810858f6 #14 [ffff880214d25d60] call_netdevice_notifiers+45 at ffffffff81536aad #15 [ffff880214d25d80] dev_close_many+183 at ffffffff81536d17 #16 [ffff880214d25dc0] rollback_registered_many+168 at ffffffff81537f68 #17 [ffff880214d25de8] rollback_registered+49 at ffffffff81538101 #18 [ffff880214d25e10] unregister_netdevice_queue+72 at ffffffff815390d8 #19 [ffff880214d25e30] __tun_detach+272 at ffffffffa074c2f0 [tun] #20 [ffff880214d25e88] tun_chr_close+45 at ffffffffa074c4bd [tun] #21 [ffff880214d25ea8] __fput+225 at ffffffff8119b1f1 #22 [ffff880214d25ef0] ____fput+14 at ffffffff8119b3fe #23 [ffff880214d25f00] task_work_run+159 at ffffffff8107cf7f #24 [ffff880214d25f30] do_notify_resume+97 at ffffffff810139e1 #25 [ffff880214d25f50] int_signal+18 at ffffffff8164f292 this is due to I forgot to check if mp->timer is armed in br_multicast_del_pg(). This bug is introduced by commit 9f00b2e7cf241fa389733d41b6 (bridge: only expire the mdb entry when query is received). Same for __br_mdb_del(). Tested-by: poma <pomidorabelisima@gmail.com> Reported-by: LiYonghua <809674045@qq.com> Reported-by: Robert Hancock <hancockrwd@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-05sfc: Fix memory leak when discarding scattered packetsBen Hutchings
Commit 2768935a4660 ('sfc: reuse pages to avoid DMA mapping/unmapping costs') did not fully take account of DMA scattering which was introduced immediately before. If a received packet is invalid and must be discarded, we only drop a reference to the first buffer's page, but we need to drop a reference for each buffer the packet used. I think this bug was missed partly because efx_recycle_rx_buffers() was not renamed and so no longer does what its name says. It does not change the state of buffers, but only prepares the underlying pages for recycling. Rename it accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04sit: fix tunnel update via netlinkNicolas Dichtel
The device can stand in another netns, hence we need to do the lookup in netns tunnel->net. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04dt:net:stmmac: Add dt specific phy reset callback support.Srinivas Kandagatla
This patch adds phy reset callback support for stmmac driver via device trees. It adds three new properties to gmac device tree bindings to define the reset signal via gpio. With this patch users can conveniently pass reset gpio number with pre, pulse and post delay in micro secs via DTs. active low: _________ ____________ <pre-delay> |<pulse-delay> |<post-delay> | | |_______________| active high: ________________ <pre-delay> |<pulse-delay> |<post-delay> | | ________| |___________ Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04dt:net:stmmac: Add support to dwmac version 3.610 and 3.710Srinivas Kandagatla
This patch adds dt support to dwmac version 3.610 and 3.710 these versions are integrated in STiH415 and STiH416 ARM A9 SOCs. To support these IP version, some of the device tree properties are extended. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04dt:net:stmmac: Allocate platform data only if its NULL.Srinivas Kandagatla
In some DT use-cases platform data might be already allocated and passed via AUXDATA. These are the cases where machine level code populates few callbacks in the platform data. This patch adds check and reuses platform_data if its valid, before allocating a new one. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-04net:stmmac: fix memleak in the open methodGiuseppe CAVALLARO
This patch is to fix a memory leak in the open method, it reviews error conditions freeing the resources previously allocated and not freed in cased of DMA failure. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03ipv6: rt6_check_neigh should successfully verify neigh if no NUD information ↵Hannes Frederic Sowa
are available After the removal of rt->n we do not create a neighbour entry at route insertion time (rt6_bind_neighbour is gone). As long as no neighbour is created because of "useful traffic" we skip this routing entry because rt6_check_neigh cannot pick up a valid neighbour (neigh == NULL) and thus returns false. This change was introduced by commit 887c95cc1da53f66a5890fdeab13414613010097 ("ipv6: Complete neighbour entry removal from dst_entry.") To quote RFC4191: "If the host has no information about the router's reachability, then the host assumes the router is reachable." and also: "A host MUST NOT probe a router's reachability in the absence of useful traffic that the host would have sent to the router if it were reachable." So, just assume the router is reachable and let's rt6_probe do the rest. We don't need to create a neighbour on route insertion time. If we don't compile with CONFIG_IPV6_ROUTER_PREF (RFC4191 support) a neighbour is only valid if its nud_state is NUD_VALID. I did not find any references that we should probe the router on route insertion time via the other RFCs. So skip this route in that case. v2: a) use IS_ENABLED instead of #ifdefs (thanks to Sergei Shtylyov) Reported-by: Pierre Emeriaud <petrus.lt@gmail.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03net: ipv6: fix wrong ping_v6_sendmsg return valueLorenzo Colitti
ping_v6_sendmsg currently returns 0 on success. It should return the number of bytes written instead. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03net: ipv6: add missing lock in ping_v6_sendmsgLorenzo Colitti
Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03netem: fix possible NULL deref in netem_dequeue()Eric Dumazet
commit aec0a40a6f7884 ("netem: use rb tree to implement the time queue") added a regression if a child qdisc is attached to netem, as we perform a NULL dereference. Fix this by adding a temporary variable to cache netem_skb_cb(skb)->time_to_send. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03net: sock: fix TCP_SKB_MIN_TRUESIZEEric Dumazet
commit eea86af6b1e18d ("net: sock: adapt SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF") forgot the sk_buff alignment taken into account in __alloc_skb() : skb->truesize = SKB_TRUESIZE(size); While above commit fixed the sender issue, the receiver is still dropping the second packet (on loopback device), because the receiver socket can not really hold two skbs : First packet truesize already is above sk_rcvbuf, so even TCP coalescing cannot help. On a typical 64bit build, each tcp skb truesize is 2304, instead of 2272 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03net/mlx4: fix small memory leak on errorDan Carpenter
"work" needs to be freed before returning on this error path. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03core: Copy inner_protocol in copy_skb_header()Joe Stringer
inner_protocol was added to struct sk_buff in 0d89d2035fe063461a5ddb609b2c12e7fb006e44 ("MPLS: Add limited GSO support"), which is scheduled to be included in v3.11. That patch did not update __copy_skb_header to copy the inner_protocol. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03net: fec: Add VLAN receive HW support.Jim Baxter
This enables the driver to take advantage of the FEC VLAN indicator to improve performance. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03alx: remove WoL supportJohannes Berg
Unfortunately, WoL is broken and the system will immediately resume after suspending, and I can't seem to figure out why. Remove WoL support until the issue can be found. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/freescale/fec_main.c drivers/net/ethernet/renesas/sh_eth.c net/ipv4/gre.c The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list) and the splitting of the gre.c code into seperate files. The FEC conflict was two sets of changes adding ethtool support code in an "!CONFIG_M5272" CPP protected block. Finally the sh_eth.c conflict was between one commit add bits set in the .eesr_err_check mask whilst another commit removed the .tx_error_check member and assignments. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03net: gre: move GSO functions to gre_offloadDaniel Borkmann
Similarly to TCP/UDP offloading, move all related GRE functions to gre_offload.c to make things more explicit and similar to the rest of the code. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: lls fix build with allnoconfigEliezer Tamir
correct placeholder declarations to prevent build breakage when !CONFIG_NET_LL_RX_POLL Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ip_tunnels: Use skb-len to PMTU check.Pravin B Shelar
In path mtu check, ip header total length works for gre device but not for gre-tap device. Use skb len which is consistent for all tunneling types. This is old bug in gre. This also fixes mtu calculation bug introduced by commit c54419321455631079c7d (GRE: Refactor GRE tunneling code). Reported-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02Merge branch 'l2tp_seq'David S. Miller
James Chapman says: ==================== L2TP data sequence numbers, if enabled, ensure in-order delivery. A receiver may reorder data packets, or simply drop out-of-sequence packets. If reordering is not enabled, the current implementation does not handle data packet loss correctly, which can result in a stalled L2TP session datapath as soon as the first packet is lost. Most L2TP users either disable sequence numbers or enable data packet reordering when sequence numbers are used to circumvent the issue. This patch series fixes the problem, and makes the L2TP sequence number handling RFC-compliant. v2 incorporates string format changes requested by sergei.shtylyov@cogentembedded.com. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02l2tp: make datapath resilient to packet loss when sequence numbers enabledJames Chapman
If L2TP data sequence numbers are enabled and reordering is not enabled, data reception stops if a packet is lost since the kernel waits for a sequence number that is never resent. (When reordering is enabled, data reception restarts when the reorder timeout expires.) If no reorder timeout is set, we should count the number of in-sequence packets after the out-of-sequence (OOS) condition is detected, and reset sequence number state after a number of such packets are received. For now, the number of in-sequence packets while in OOS state which cause the sequence number state to be reset is hard-coded to 5. This could be configurable later. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02l2tp: make datapath sequence number support RFC-compliantJames Chapman
The L2TP datapath is not currently RFC-compliant when sequence numbers are used in L2TP data packets. According to the L2TP RFC, any received sequence number NR greater than or equal to the next expected NR is acceptable, where the "greater than or equal to" test is determined by the NR wrap point. This differs for L2TPv2 and L2TPv3, so add state in the session context to hold the max NR value and the NR window size in order to do the acceptable sequence number value check. These might be configurable later, but for now we derive it from the tunnel L2TP version, which determines the sequence number field size. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02l2tp: do data sequence number handling in a separate funcJames Chapman
This change moves some code handling data sequence numbers into a separate function to avoid too much indentation. This is to prepare for some changes to data sequence number handling in subsequent patches. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02sctp: use get_unused_fd_flags(0) instead of get_unused_fd()Yann Droneaud
Macro get_unused_fd() is used to allocate a file descriptor with default flags. Those default flags (0) can be "unsafe": O_CLOEXEC must be used by default to not leak file descriptor across exec(). Instead of macro get_unused_fd(), functions anon_inode_getfd() or get_unused_fd_flags() should be used with flags given by userspace. If not possible, flags should be set to O_CLOEXEC to provide userspace with a default safe behavor. In a further patch, get_unused_fd() will be removed so that new code start using anon_inode_getfd() or get_unused_fd_flags() with correct flags. This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. The hard coded flag value (0) should be reviewed on a per-subsystem basis, and, if possible, set to O_CLOEXEC. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02stmmac: dity-up and rework the driver debug levelsGiuseppe CAVALLARO
Prior this patch, the internal debugging was based on ifdef and also some printk were useless because many info are exposed via ethtool. This patch remove all the ifdef defines and now we only use netif_msg_XXX levels. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02core/dev: set pkt_type after eth_type_trans() in dev_forward_skb()Isaku Yamahata
The dev_forward_skb() assignment of pkt_type should be done after the call to eth_type_trans(). ip-encapsulated packets can be handled by localhost. But skb->pkt_type can be PACKET_OTHERHOST when packet comes via veth into ip tunnel device. In that case, the packet is dropped by ip_rcv(). Although this example uses gretap. l2tp-eth also has same issue. For l2tp-eth case, add dummy device for ip address and ip l2tp command. netns A | root netns | netns B veth<->veth=bridge=gretap <-loop back-> gretap=bridge=veth<->veth arp packet -> pkt_type BROADCAST------------>ip_rcv()------------------------> <- arp reply pkt_type ip_rcv()<-----------------OTHERHOST drop sample operations ip link add tapa type gretap remote 172.17.107.4 local 172.17.107.3 ip link add tapb type gretap remote 172.17.107.3 local 172.17.107.4 ip link set tapa up ip link set tapb up ip address add 172.17.107.3 dev tapa ip address add 172.17.107.4 dev tapb ip route get 172.17.107.3 > local 172.17.107.3 dev lo src 172.17.107.3 > cache <local> ip route get 172.17.107.4 > local 172.17.107.4 dev lo src 172.17.107.4 > cache <local> ip link add vetha type veth peer name vetha-peer ip link add vethb type veth peer name vethb-peer brctl addbr bra brctl addbr brb brctl addif bra tapa brctl addif bra vetha-peer brctl addif brb tapb brctl addif brb vethb-peer brctl show > bridge name bridge id STP enabled interfaces > bra 8000.6ea21e758ff1 no tapa > vetha-peer > brb 8000.420020eb92d5 no tapb > vethb-peer ip link set vetha-peer up ip link set vethb-peer up ip link set bra up ip link set brb up ip netns add a ip netns add b ip link set vetha netns a ip link set vethb netns b ip netns exec a ip address add 10.0.0.3/24 dev vetha ip netns exec b ip address add 10.0.0.4/24 dev vethb ip netns exec a ip link set vetha up ip netns exec b ip link set vethb up ip netns exec a arping -I vetha 10.0.0.4 ARPING 10.0.0.4 from 10.0.0.3 vetha ^CSent 2 probes (2 broadcast(s)) Received 0 response(s) Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Hong Zhiguo <honkiko@gmail.com> Cc: Rami Rosen <ramirose@gmail.com> Cc: Tom Parkin <tparkin@katalix.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Jesse Gross <jesse@nicira.com> Cc: dev@openvswitch.org Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: convert lls to use time_in_range()Eliezer Tamir
Time in range will fail safely if we move to a different cpu with an extremely large clock skew. Add time_in_range64() and convert lls to use it. changelog: v2 - fixed double call to sched_clock in can_poll_ll - fixed checkpatchisms Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02nlmon: use standard rtnetlink link api for add/del devicesJiri Pirko
It is not nice when netdev is created right after module load and with some implicit name. So rather change nlmon to use standard rtnl link API. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_sizeHannes Frederic Sowa
If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track of this when appending the second frame on a corked socket. This results in the following splat: [37598.993962] ------------[ cut here ]------------ [37598.994008] kernel BUG at net/core/skbuff.c:2064! [37598.994008] invalid opcode: 0000 [#1] SMP [37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat +nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi +scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm [37598.994008] snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc +dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video [37598.994008] CPU 0 [37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG [37598.994008] RIP: 0010:[<ffffffff815443a5>] [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP: 0018:ffff88003670da18 EFLAGS: 00010202 [37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0 [37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00 [37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040 [37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8 [37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000 [37598.994008] FS: 00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 [37598.994008] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0 [37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0) [37598.994008] Stack: [37598.994008] ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8 [37598.994008] ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200 [37598.994008] 0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4 [37598.994008] Call Trace: [37598.994008] [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0 [37598.994008] [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0 [37598.994008] [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40 [37598.994008] [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10 [37598.994008] [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90 [37598.994008] [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0 [37598.994008] [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30 [37598.994008] [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0 [37598.994008] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [37598.994008] [<ffffffff8153d97d>] sys_sendto+0x12d/0x180 [37598.994008] [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0 [37598.994008] [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240 [37598.994008] [<ffffffff8166a7e7>] tracesys+0xdd/0xe2 [37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48 [37598.994008] RIP [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP <ffff88003670da18> [37599.007323] ---[ end trace d69f6a17f8ac8eee ]--- While there, also check if path mtu discovery is activated for this socket. The logic was adapted from ip6_append_data when first writing on the corked socket. This bug was introduced with commit 0c1833797a5a6ec23ea9261d979aa18078720b74 ("ipv6: fix incorrect ipsec fragment"). v2: a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE. b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao feng, thanks!). c) Change mtu to unsigned int, else we get a warning about non-matching types because of the min()-macro type-check. Acked-by: Gao feng <gaofeng@cn.fujitsu.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET ↵Hannes Frederic Sowa
pending data We accidentally call down to ip6_push_pending_frames when uncorking pending AF_INET data on a ipv6 socket. This results in the following splat (from Dave Jones): skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth +netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37 task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000 RIP: 0010:[<ffffffff816e759c>] [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP: 0018:ffff8801e6431de8 EFLAGS: 00010282 RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006 RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520 RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800 R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800 FS: 00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Stack: ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0 Call Trace: [<ffffffff8159a9aa>] skb_push+0x3a/0x40 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0 [<ffffffff816f5d54>] tracesys+0xdd/0xe2 Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 RIP [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP <ffff8801e6431de8> This patch adds a check if the pending data is of address family AF_INET and directly calls udp_push_ending_frames from udp_v6_push_pending_frames if that is the case. This bug was found by Dave Jones with trinity. (Also move the initialization of fl6 below the AF_INET check, even if not strictly necessary.) Cc: Dave Jones <davej@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: fec: Fix RMON registers on imx6Jim Baxter
commit 38ae92d "fec: Add support for reading RMON registers" causes the imx6Q to crash. This fixes it by only enabling the RMON registers, the registers are already cleared by the MAC being reset. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02cxgb3: Missing rtnl lock in error recoveryBenjamin Herrenschmidt
When exercising error injection on IBM pseries machine, I hit the following warning: [ 251.450043] RTAS: event: 89, Type: Platform Error, Severity: 2 [ 253.549822] cxgb3 0006:01:00.0: enabling device (0140 -> 0142) [ 253.713560] cxgb3 0006:01:00.0: adapter recovering, PEX ERR 0x100 [ 254.895437] RTNL: assertion failed at net/core/dev.c (2031) [ 254.895467] CPU: 6 PID: 5449 Comm: eehd Tainted: G W 3.10.0-rc7-00157-gea461ab #19 [ 254.895474] Call Trace: [ 254.895483] [c000000fac56f7d0] [c000000000014dcc] .show_stack+0x7c/0x1f0 (unreliable) [ 254.895493] [c000000fac56f8a0] [c0000000007ba318] .dump_stack+0x28/0x3c [ 254.895500] [c000000fac56f910] [c0000000006c0384] .netif_set_real_num_tx_queues+0x224/0x230 [ 254.895515] [c000000fac56f9b0] [d00000000ef35510] .cxgb_open+0x80/0x3f0 [cxgb3] [ 254.895525] [c000000fac56fa50] [d00000000ef35914] .t3_resume_ports+0x94/0x100 [cxgb3] [ 254.895533] [c000000fac56fae0] [c00000000005fc8c] .eeh_report_resume+0x8c/0xd0 [ 254.895539] [c000000fac56fb60] [c00000000005e9fc] .eeh_pe_dev_traverse+0x9c/0x190 [ 254.895545] [c000000fac56fc10] [c000000000060000] .eeh_handle_event+0x110/0x330 [ 254.895551] [c000000fac56fca0] [c000000000060350] .eeh_event_handler+0x130/0x1a0 [ 254.895558] [c000000fac56fd30] [c0000000000ad758] .kthread+0xe8/0xf0 [ 254.895566] [c000000fac56fe30] [c00000000000a05c] .ret_from_kernel_thread+0x5c/0x80 It appears that t3_resume_ports() is called with the rtnl_lock held from the fatal error task but not from the PCI error callbacks. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: cdc_ether: allow combined control and data interfaceBjørn Mork
Some Icera based Huawei modems handled by this driver are not completely CDC ECM compliant, using the same USB interface for both control and data. The CDC functional descriptors include a Union naming this interface as both master and slave, so it is supportable by relaxing the descriptor parsing in case these interfaces are identical. This has been tested on a Huawei K3806 and verified to add support for that device. Reported-and-tested-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: fec: Fix Transmitted bytes counterJim Baxter
The tx_bytes field was not being updated so the network card statistics showed 0.0B transmitted. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ipip: fix a regression in ioctlCong Wang
This is a regression introduced by commit fd58156e456d9f68fe0448 (IPIP: Use ip-tunneling code.) Similar to GRE tunnel, previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. Also, the check for i_key, o_key etc. is suspicious too, which did not exist before, reset them before passing to ip_tunnel_ioctl(). Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02l2tp: add missing .owner to struct pppox_protoWei Yongjun
Add missing .owner of struct pppox_proto. This prevents the module from being removed from underneath its users. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: ethernet: davinci_emac: remove redundant dev_err call in ↵Wei Yongjun
davinci_emac_probe() There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 14:27:51 +0000