summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-21benet: be_resume needs to protect be_open with rtnl_lockHannes Frederic Sowa
be_open calls down to functions which expects rtnl lock to be held. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21openvswitch: use flow protocol when recalculating ipv6 checksumsSimon Horman
When using masked actions the ipv6_proto field of an action to set IPv6 fields may be zero rather than the prevailing protocol which will result in skipping checksum recalculation. This patch resolves the problem by relying on the protocol in the flow key rather than that in the set field action. Fixes: 83d2b9ba1abc ("net: openvswitch: Support masked set actions.") Cc: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packetsShrikrishna Khare
For IPv6, if the device indicates that the checksum is correct, set CHECKSUM_UNNECESSARY. Reported-by: Subbarao Narahari <snarahari@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: Jin Heo <heoj@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21atl2: Disable unimplemented scatter/gather featureBen Hutchings
atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by: Justin Yackoski <jyackoski@crypto-nite.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: ec5f06156423 ("net: Kill link between CSUM and SG features.") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: Add support for IP ID mangling TSO in cases that require encapsulationAlexander Duyck
This patch adds support for NETIF_F_TSO_MANGLEID if a given tunnel supports NETIF_F_TSO. This way if needed a device can then later enable the TSO with IP ID mangling and the tunnels on top of that device can then also make use of the IP ID mangling as well. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge branch 'mlx5-next'David S. Miller
Saeed Mahameed says: ==================== Mellanox 100G mlx5 driver receive path optimizations Changes from V2: - Rebased to 46e7b8d8d53b ("net: dsa: kill circular reference with slave priv") - Updated: ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") * Per Eric Dumazet comment we changed the driver memory handling scheme to work with order-0 pages rather than order-5 via split_page(). * This means that now a mlx5e rx skb can hold one or (more in case of HW LRO) skb frag each pointing to a 4K order-0 page rather than one frag with order-5 page. - Updated: ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") * Code refactoring and code reuse due the split_page() mechanism, now the MPWQE and fragmented MPWQE handling almost look the same, and share most of the code. - In some cases we see 2%-3% packet rate degradation in comparison to the order-5 pages approach, due to split_page() cpu consumption, but still we do see 3%-10% improvement in comparison to the current linear SKB approach. - We do believe that now the driver memory scheme is significantly less vulnerable to the memory DOS attack Eric pointed at. Changes from V1: - Rebased to efde611b0afa ("Merge branch 'nfp-next'") - Dropped: ("net/mlx5: Refactor mlx5_core_mr to mkey") Already merged into 4.6 from rdma tree. - Dropped: ("net/mlx5_core: Add ConnectX-5 to list of supported devices") Will be pushed to net as we want it in 4.6 release. - Dropped: ("net/mlx5e: Change RX moderation period to be based on CQE") Will be pushed in a later series with full software based adaptive moderation. - Added: ("net/mlx5e: Delay skb->data access") Small trivial optimization. - Updated: ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Changed Striding RQ defaults to: > NUM WQEs = 16 > Strides Per WQE = 1024 > Stride Size = 128 - Updated: ("net/mlx5e: Use napi_alloc_skb for RX SKB allocations") Consider the IP packet alignment already done in napi_alloc_skb. Changes from V0: - Fixed a typo in commit message reported by Sergei - Align SKB fragments truesize to stride size - Use skb_add_rx_frag and remove the use of SKB_TRUESIZE - Fix: # MTTs alignment on Power PC - Fix: Free original (unaligned) pointer of MTT array - Use dev_alloc_pages and dev_alloc_page - Extend the stats.buff_alloc_err counter - Reform the copying of packet header into skb linear data - Add compiler hints for conditional statements - Prefetch skd->data prior to copying packet header into it - Rework: mlx5e_complete_rx_fragmented_mpwqe - Handle SKB fragments before linear data - Dropped ("net/mlx5e: Prefetch next RX CQE") for now - Added a small patch that Adds ConnectX-5 devices to the list of supported devices - Rebased to 1cdba5505555 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next") This series includes Some RX modifications and optimizations for the mlx5 Ethernet driver. From Rana, we have one patch that adds the support for Connectx-4 queue counters. From Tariq, several patches that are centralized around improving RX path message rate, CPU and Memory utilization, in each patch commit message you will find the performance improvements numbers related to that specific patch. In the 2nd patch we used a queue counter to report "out of buffer" dropped packet count, "Dropped packets due to lack of software resources" 3rd patch modifies the driver's to RSS default value to be spread along the close NUMA node cores only for better out of the box experience. In the 4th and 5th patches we utilized the use of RX multi-packet WQE (Striding RQ) for better memory utilization especially in case of hardware LRO is enabled and for better message rate for small packets. In the 6th and 7th patches we added a fallback mechanism to use fragmented memory when allocating large WQE strides fails, using UMR (User Memory Registration) and ICO (Internal Control Operations) SQs. In the 8th to 11th patches we did some small modification which show some small extra improvements. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Add ethtool counter for RX buffer allocation failuresTariq Toukan
Counts the number of RX buffer allocation failures and shows it in ethtool statistics. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Delay skb->data accessSaeed Mahameed
Move mlx5e_handle_csum and eth_type_trans to the end of mlx5e_build_rx_skb to gain some more time before accessing skb->data, to reduce cache misses. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Remove redundant barrierTariq Toukan
The bit-op operation one line before is an explicit barrier by itself. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Use napi_alloc_skb for RX SKB allocationsTariq Toukan
Instead of netdev_alloc_skb, we use the napi_alloc_skb function which is designated to allocate skbuff's for RX in a channel-specific NAPI instance, and implies the IP packet alignment. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Add fragmented memory support for RX multi packet WQETariq Toukan
If the allocation of a linear (physically continuous) MPWQE fails, we allocate a fragmented MPWQE. This is implemented via device's UMR (User Memory Registration) which allows to register multiple memory fragments into ConnectX hardware as a continuous buffer. UMR registration is an asynchronous operation and is done via ICO SQs. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Added ICO SQsTariq Toukan
Added ICO (Internal Control Operations) SQ per channel to be used for driver internal operations such as memory registration for fragmented memory and nop requests upon ifconfig up. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Support RX multi-packet WQE (Striding RQ)Tariq Toukan
Introduce the feature of multi-packet WQE (RX Work Queue Element) referred to as (MPWQE or Striding RQ), in which WQEs are larger and serve multiple packets each. Every WQE consists of many strides of the same size, every received packet is aligned to a beginning of a stride and is written to consecutive strides within a WQE. In the regular approach, each regular WQE is big enough to be capable of serving one received packet of any size up to MTU or 64K in case of device LRO is enabled, making it very wasteful when dealing with small packets or device LRO is enabled. For its flexibility, MPWQE allows a better memory utilization (implying improvements in CPU utilization and packet rate) as packets consume strides according to their size, preserving the rest of the WQE to be available for other packets. MPWQE default configuration: Num of WQEs = 16 Strides Per WQE = 2048 Stride Size = 64 byte The default WQEs memory footprint went from 1024*mtu (~1.5MB) to 16 * 2048 * 64 = 2MB per ring. However, HW LRO can now be supported at no additional cost in memory footprint, and hence we turn it on by default and get an even better performance. Performance tested on ConnectX4-Lx 50G. To isolate the feature under test, the numbers below were measured with HW LRO turned off. We verified that the performance just improves when LRO is turned back on. * Netperf single TCP stream: - BW raised by 10-15% for representative packet sizes: default, 64B, 1024B, 1478B, 65536B. * Netperf multi TCP stream: - No degradation, line rate reached. * Pktgen: packet rate raised by 2-10% for traffic of different message sizes: 64B, 128B, 256B, 1024B, and 1500B. * Pktgen: packet loss in bursts of small messages (64byte), single stream: - | num packets | packets loss before | packets loss after | 2K | ~ 1K | 0 | 8K | ~ 6K | 0 | 16K | ~13K | 0 | 32K | ~28K | 0 | 64K | ~57K | ~24K As expected as the driver can receive as many small packets (<=64B) as the number of total strides in the ring (default = 2048 * 16) vs. 1024 (default ring size regardless of packets size) before this feature. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Use function pointers for RX data path handlingTariq Toukan
In preparation for Striding RQ feature, which will need its own RX handlers. This patch does not change any functionality. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Use only close NUMA node for default RSSTariq Toukan
Distribute default RSS table uniformly over the rings of the close NUMA node, instead of all available channels. This way we enforce the preference of close rings over far ones. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Allocate set of queue counters per netdevRana Shahout
Connect all netdev RQs to this set of queue counters. Also, add an "rx_out_of_buffer" counter to ethtool, which indicates RX packet drops due to lack of receive buffers. Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5: Introduce device queue countersTariq Toukan
A queue counter can collect several statistics for one or more hardware queues (QPs, RQs, etc ..) that the counter is attached to. For Ethernet it will provide an "out of buffer" counter which collects the number of all packets that are dropped due to lack of software buffers. Here we add device commands to alloc/query/dealloc queue counters. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge branch 'bcmsysport-napi-updates'David S. Miller
Florian Fainelli says: ==================== net: bcmsysport: utilize newer NAPI APIs These two patches are very analoguous to what was already submitted for BCMGENET and switch the SYSTEMPORT driver to utilizing __napi_schedule_irqoff() and napi_complete_done for the RX NAPI context. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: bcmsysport: use napi_complete_done()Florian Fainelli
By using napi_complete_done(), we allow fine tuning of /sys/class/net/ethX/gro_flush_timeout for higher GRO aggregation efficiency for a Gbit NIC. Check commit 24d2e4a50737 ("tg3: use napi_complete_done()") for details. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: bcmsysport: use __napi_schedule_irqoff()Florian Fainelli
Both bcm_sysport_tx_isr() and bcm_sysport_rx_isr() run in hard irq context, we do not need to block irq again. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge branch 'mlx4-fixes'David S. Miller
Or Gerlitz says: ==================== Mellaox 40G driver fixes for 4.6-rc With the fix for ARM bug being under the works, these are few other fixes for mlx4 we have ready to go. Eran addressed the problematic/wrong reporting of dropped packets, Daniel fixed some matters related to PPC EEH's and Jenny's patch makes sure VFs can't change the port's pause settings. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_en: Split SW RX dropped counter per RX ringEran Ben Elisha
Count SW packet drops per RX ring instead of a global counter. This will allow monitoring the number of rx drops per ring. In addition, SW rx_dropped counter was overwritten by HW rx_dropped counter, sum both of them instead to show the accurate value. Fixes: a3333b35da16 ('net/mlx4_en: Moderate ethtool callback to [...] ') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_core: Don't allow to VF change global pause settingsEugenia Emantayev
Currently changing global pause settings is done via SET_PORT command with input modifier GENERAL. This command is allowed for each VF since MTU setting is done via the same command. Change the above to the following scheme: before passing the request to the FW, the PF will check whether it was issued by a slave. If yes, don't change global pause and warn, otherwise change to the requested value and store for further reference. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_core: Avoid repeated calls to pci enable/disableDaniel Jurgens
Maintain the PCI status and provide wrappers for enabling and disabling the PCI device. Performing the actions more than once without doing its opposite results in warning logs. This occurred when EEH hotplugged the device causing a warning for disabling an already disabled device. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_core: Implement pci_resume callbackDaniel Jurgens
Move resume related activities to a new pci_resume function instead of performing them in mlx4_pci_slot_reset. This change is needed to avoid a hotplug during EEH recovery due to commit f2da4ccf8bd4 ("powerpc/eeh: More relaxed hotplug criterion"). Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: phy: spi_ks8895: Don't leak references to SPI devicesMark Brown
The ks8895 driver is using spi_dev_get() apparently just to take a copy of the SPI device used to instantiate it but never calls spi_dev_put() to free it. Since the device is guaranteed to exist between probe() and remove() there should be no need for the driver to take an extra reference to it so fix the leak by just using a straight assignment. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: ethernet: davinci_emac: Fix platform_data overwriteNeil Armstrong
When the DaVinci emac driver is removed and re-probed, the actual pdev->dev.platform_data is populated with an unwanted valid pointer saved by the previous davinci_emac_of_get_pdata() call, causing a kernel crash when calling priv->int_disable() in emac_int_disable(). Unable to handle kernel paging request at virtual address c8622a80 ... [<c0426fb4>] (emac_int_disable) from [<c0427700>] (emac_dev_open+0x290/0x5f8) [<c0427700>] (emac_dev_open) from [<c04c00ec>] (__dev_open+0xb8/0x120) [<c04c00ec>] (__dev_open) from [<c04c0370>] (__dev_change_flags+0x88/0x14c) [<c04c0370>] (__dev_change_flags) from [<c04c044c>] (dev_change_flags+0x18/0x48) [<c04c044c>] (dev_change_flags) from [<c052bafc>] (devinet_ioctl+0x6b4/0x7ac) [<c052bafc>] (devinet_ioctl) from [<c04a1428>] (sock_ioctl+0x1d8/0x2c0) [<c04a1428>] (sock_ioctl) from [<c014f054>] (do_vfs_ioctl+0x41c/0x600) [<c014f054>] (do_vfs_ioctl) from [<c014f2a4>] (SyS_ioctl+0x6c/0x7c) [<c014f2a4>] (SyS_ioctl) from [<c000ff60>] (ret_fast_syscall+0x0/0x1c) Fixes: 42f59967a091 ("net: ethernet: davinci_emac: add OF support") Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enableNeil Armstrong
In order to avoid an Unbalanced pm_runtime_enable in the DaVinci emac driver when the device is removed and re-probed, and a pm_runtime_disable() call in davinci_emac_remove(). Actually, using unbind/bind on a TI DM8168 SoC gives : $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/unbind net eth1: DaVinci EMAC: davinci_emac_remove() $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/bind davinci_emac 4a120000.ethernet: Unbalanced pm_runtime_enable Cc: Brian Hutchinson <b.hutchman@gmail.com> Fixes: 3ba97381343b ("net: ethernet: davinci_emac: add pm_runtime support") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge branch 'pm-cpufreq-fixes'Rafael J. Wysocki
* pm-cpufreq-fixes: cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set intel_pstate: Avoid getting stuck in high P-states when idle
2016-04-21Merge branch 'qed-fixes'David S. Miller
Manish Chopra says: ==================== qede: Bug fixes This series fixes - * various memory allocation failure flows for fastpath * issues with respect to driver GRO packets handling V1->V2 * Send series against net instead of net-next. Please consider applying this series to "net" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix single MTU sized packet from firmware GRO flowManish Chopra
In firmware assisted GRO flow there could be a single MTU sized segment arriving due to firmware aggregation timeout/last segment in an aggregation flow, which is not expected to be an actual gro packet. So If a skb has zero frags from the GRO flow then simply push it in the stack as non gso skb. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix setting Skb network headerManish Chopra
Skb's network header needs to be set before extracting IPv4/IPv6 headers from it. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21qede: Fix various memory allocation error flows for fastpathManish Chopra
This patch handles memory allocation failures for fastpath gracefully in the driver. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge branch 'tcp-coalesce-merge-timestamps'David S. Miller
Martin KaFai Lau says: ==================== tcp: Merge timestamp info when coalescing skbs This series is separated from the RFC series related to tcp_sendmsg(MSG_EOR) and it is targeting for the net branch. This patchset is focusing on fixing cases where TCP timestamp could be lost after coalescing skbs. A BPF prog is used to kprobe to sock_queue_err_skb() and print out the value of serr->ee.ee_data. The BPF prog (run-able from bcc) is attached here: BPF prog used for testing: ~~~~~ from __future__ import print_function from bcc import BPF bpf_text = """ int trace_err_skb(struct pt_regs *ctx) { struct sk_buff *skb = (struct sk_buff *)ctx->si; struct sock *sk = (struct sock *)ctx->di; struct sock_exterr_skb *serr; u32 ee_data = 0; if (!sk || !skb) return 0; serr = SKB_EXT_ERR(skb); bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data); bpf_trace_printk("ee_data:%u\\n", ee_data); return 0; }; """ b = BPF(text=bpf_text) b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb") print("Attached to kprobe") b.trace_print() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21tcp: Merge tx_flags and tskey in tcp_shifted_skbMartin KaFai Lau
After receiving sacks, tcp_shifted_skb() will collapse skbs if possible. tx_flags and tskey also have to be merged. This patch reuses the tcp_skb_collapse_tstamp() to handle them. BPF Output Before: ~~~~~ <no-output-due-to-missing-tstamp-event> BPF Output After: ~~~~~ <...>-2024 [007] d.s. 88.644374: : ee_data:14599 Packetdrill Script: ~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 1460) = 1460 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21tcp: Merge tx_flags and tskey in tcp_collapse_retransMartin KaFai Lau
If two skbs are merged/collapsed during retransmission, the current logic does not merge the tx_flags and tskey. The end result is the SCM_TSTAMP_ACK timestamp could be missing for a packet. The patch: 1. Merge the tx_flags 2. Overwrite the prev_skb's tskey with the next_skb's tskey BPF Output Before: ~~~~~~ <no-output-due-to-missing-tstamp-event> BPF Output After: ~~~~~~ packetdrill-2092 [001] d.s. 453.998486: : ee_data:1459 Packetdrill Script: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 730) = 730 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 730) = 730 +0 setsockopt(4, SOL_SOCKET, 37, [2176], 4) = 0 0.200 write(4, ..., 11680) = 11680 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 > P. 1:731(730) ack 1 0.200 > P. 731:1461(730) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:13141(4380) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 13141 win 257 0.400 close(4) = 0 0.400 > F. 13141:13141(0) ack 1 0.500 < F. 1:1(0) ack 13142 win 257 0.500 > . 13142:13142(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21drivers: net: cpsw: fix wrong regs access in cpsw_ndo_openGrygorii Strashko
The cpsw_ndo_open() could try to access CPSW registers before calling pm_runtime_get_sync(). This will trigger L3 error: WARNING: CPU: 0 PID: 21 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x34c() 44000000.ocp:L3 Custom Error: MASTER M2 (64-bit) TARGET L4_FAST (Idle): Data Access in Supervisor mode during Functional access and CPSW will stop functioning. Hence, fix it by moving pm_runtime_get_sync() before the first access to CPSW registers in cpsw_ndo_open(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21Merge branch 'nlattr_align'David S. Miller
Nicolas Dichtel says: ==================== libnl: enhance API to ease 64bit alignment for attribute Here is a proposal to add more helpers in the libnetlink to manage 64-bit alignment issues. Note that this series was only tested on x86 by tweeking CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS and adding some traces. The first patch adds helpers for 64bit alignment and other patches use them. We could also add helpers for nla_put_u64() and its variants if needed. v1 -> v2: - remove patch #1 - split patch #2 (now #1 and #2) - add nla_need_padding_for_64bit() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21ip6mr: align RTA_MFC_STATS on 64-bitNicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21ipmr: align RTA_MFC_STATS on 64-bitNicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21rtnl: use the new API to align IFLA_STATS*Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21libnl: add more helpers to align attributes on 64-bitNicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21veth: Update features to include all tunnel GSO typesAlexander Duyck
This patch adds support for the checksum enabled versions of UDP and GRE tunnels. With this change we should be able to send and receive GSO frames of these types over the veth pair without needing to segment the packets. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21netdev_features: Fold NETIF_F_ALL_TSO into NETIF_F_GSO_SOFTWAREAlexander Duyck
This patch folds NETIF_F_ALL_TSO into the bitmask for NETIF_F_GSO_SOFTWARE. The idea is to avoid duplication of defines since the only difference between the two was the GSO_UDP bit. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21geneve: testing the wrong variable in geneve6_build_skb()Dan Carpenter
We intended to test "err" and not "skb". Fixes: aed069df099c ('ip_tunnel_core: iptunnel_handle_offloads returns int and doesn't free skb') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21NLA_BINARY misuse bug in HSRPeter Heise
Removed .type field from NLA to do proper length checking. Reported by Daniel Borkmann and Julia Lawall. Signed-off-by: Peter Heise <peter.heise@airbus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: use jiffies_to_msecs to replace EXPIRES_IN_MS in inet/sctp_diagXin Long
EXPIRES_IN_MS macro comes from net/ipv4/inet_diag.c and dates back to before jiffies_to_msecs() has been introduced. Now we can remove it and use jiffies_to_msecs(). Suggested-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jakub Sitnicki <jkbs@redhat.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21perf, bpf: minimize the size of perf_trace_() tracepoint handlerAlexei Starovoitov
move trace_call_bpf() into helper function to minimize the size of perf_trace_*() tracepoint handlers. text data bss dec hex filename 10541679 5526646 2945024 19013349 1221ee5 vmlinux_before 10509422 5526646 2945024 18981092 121a0e4 vmlinux_after It may seem that perf_fetch_caller_regs() can also be moved, but that is incorrect, since ip/sp will be wrong. bpf+tracepoint performance is not affected, since perf_swevent_put_recursion_context() is now inlined. export_symbol_gpl can also be dropped. No measurable change in normal perf tracepoints. Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acksMartin KaFai Lau
Assuming SOF_TIMESTAMPING_TX_ACK is on. When dup acks are received, it could incorrectly think that a skb has already been acked and queue a SCM_TSTAMP_ACK cmsg to the sk->sk_error_queue. In tcp_ack_tstamp(), it checks 'between(shinfo->tskey, prior_snd_una, tcp_sk(sk)->snd_una - 1)'. If prior_snd_una == tcp_sk(sk)->snd_una like the following packetdrill script, between() returns true but the tskey is actually not acked. e.g. try between(3, 2, 1). The fix is to replace between() with one before() and one !before(). By doing this, the -1 offset on the tcp_sk(sk)->snd_una can also be removed. A packetdrill script is used to reproduce the dup ack scenario. Due to the lacking cmsg support in packetdrill (may be I cannot find it), a BPF prog is used to kprobe to sock_queue_err_skb() and print out the value of serr->ee.ee_data. Both the packetdrill and the bcc BPF script is attached at the end of this commit message. BPF Output Before Fix: ~~~~~~ <...>-2056 [001] d.s. 433.927987: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 433.929563: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 433.930765: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 434.028177: : ee_data:1459 packetdrill-2056 [001] d.s. 434.029686: : ee_data:14599 BPF Output After Fix: ~~~~~~ <...>-2049 [000] d.s. 113.517039: : ee_data:1459 <...>-2049 [000] d.s. 113.517253: : ee_data:14599 BCC BPF Script: ~~~~~~ #!/usr/bin/env python from __future__ import print_function from bcc import BPF bpf_text = """ #include <uapi/linux/ptrace.h> #include <net/sock.h> #include <bcc/proto.h> #include <linux/errqueue.h> #ifdef memset #undef memset #endif int trace_err_skb(struct pt_regs *ctx) { struct sk_buff *skb = (struct sk_buff *)ctx->si; struct sock *sk = (struct sock *)ctx->di; struct sock_exterr_skb *serr; u32 ee_data = 0; if (!sk || !skb) return 0; serr = SKB_EXT_ERR(skb); bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data); bpf_trace_printk("ee_data:%u\\n", ee_data); return 0; }; """ b = BPF(text=bpf_text) b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb") print("Attached to kprobe") b.trace_print() Packetdrill Script: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 1460) = 1460 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil.kdev@gmail.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net: dsa: remove tag_protocol from dsa_switchVivien Didelot
Having the tag protocol in dsa_switch_driver for setup time and in dsa_switch_tree for runtime is enough. Remove dsa_switch's one. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 00:17:55 +0000