summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-18x86, relocs: Workaround for binutils 2.22.52.0.1 section bugH. Peter Anvin
GNU ld 2.22.52.0.1 has a bug that it blindly changes symbols from section-relative to absolute if they are in a section of zero length. This turns the symbols __init_begin and __init_end into absolute symbols. Let the relocs program know that those should be treated as relative symbols. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: <stable@vger.kernel.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
2012-05-18x86, realmode: 16-bit real-mode code support for relocs toolH. Peter Anvin
A new option is added to the relocs tool called '--realmode'. This option causes the generation of 16-bit segment relocations and 32-bit linear relocations for the real-mode code. When the real-mode code is moved to the low-memory during kernel initialization, these relocation entries can be used to relocate the code properly. In the assembly code 16-bit segment relocations must be relative to the 'real_mode_seg' absolute symbol. Linear relocations must be relative to a symbol prefixed with 'pa_'. 16-bit segment relocation is used to load cs:ip in 16-bit code. Linear relocations are used in the 32-bit code for relocatable data references. They are declared in the linker script of the real-mode code. The relocs tool is moved to arch/x86/tools/relocs.c, and added new target archscripts that can be used to build scripts needed building an architecture. be compiled before building the arch/x86 tree. [ hpa: accelerating this because it detects invalid absolute relocations, a serious bug in binutils 2.22.52.0.x which currently produces bad kernels. ] Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.com Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2012-05-18Merge tag 'dm-3.4-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull a dm fix from Alasdair G Kergon: "A fix to the thin provisioning userspace interface." * tag 'dm-3.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm thin: fix table output when pool target disables discard passdown internally
2012-05-19dm thin: fix table output when pool target disables discard passdown internallyMike Snitzer
When the thin pool target clears the discard_passdown parameter internally, it incorrectly changes the table line reported to userspace. This breaks dumb string comparisons on these table lines in generic userspace device-mapper library code and leads to tables being reloaded repeatedly when nothing is actually meant to be changing. This patch corrects this by no longer changing the table line when discard passdown was disabled. We can still tell when discard passdown is overridden by looking for the message "Discard unsupported by data device (sdX): Disabling discard passdown." This automatic detection is also moved from the 'load' to the 'resume' so that it is re-evaluated should the properties of underlying devices change. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-05-18Merge tag 'md-3.4-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull one more md bugfix from NeilBrown: "Fix bug in recent fix to RAID10. Without this patch, recovery will crash" * tag 'md-3.4-fixes' of git://neil.brown.name/md: md/raid10: fix transcription error in calc_sectors conversion.
2012-05-18Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull tile tree bugfix from Chris Metcalf: "This fixes a security vulnerability (and correctness bug) in tilegx" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tilegx: enable SYSCALL_WRAPPERS support
2012-05-19md/raid10: fix transcription error in calc_sectors conversion.NeilBrown
The old code was sector_div(stride, fc); the new code was sector_dir(size, conf->near_copies); 'size' is right (the stride various wasn't really needed), but 'fc' means 'far_copies', and that is an important difference. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-18Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge misc fixes from Andrew Morton. * emailed from Andrew Morton <akpm@linux-foundation.org>: (4 patches) frv: delete incorrect task prototypes causing compile fail slub: missing test for partial pages flush work in flush_all() fs, proc: fix ABBA deadlock in case of execution attempt of map_files/ entries drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01
2012-05-18proc: move fd symlink i_mode calculations into tid_fd_revalidate()Linus Torvalds
Instead of doing the i_mode calculations at proc_fd_instantiate() time, move them into tid_fd_revalidate(), which is where the other inode state (notably uid/gid information) is updated too. Otherwise we'll end up with stale i_mode information if an fd is re-used while the dentry still hangs around. Not that anything really *cares* (symlink permissions don't really matter), but Tetsuo Handa noticed that the owner read/write bits don't always match the state of the readability of the file descriptor, and we _used_ to get this right a long time ago in a galaxy far, far away. Besides, aside from fixing an ugly detail (that has apparently been this way since commit 61a28784028e: "proc: Remove the hard coded inode numbers" in 2006), this removes more lines of code than it adds. And it just makes sense to update i_mode in the same place we update i_uid/gid. Al Viro correctly points out that we could just do the inode fill in the inode iops ->getattr() function instead. However, that does require somewhat slightly more invasive changes, and adds yet *another* lookup of the file descriptor. We need to do the revalidate() for other reasons anyway, and have the file descriptor handy, so we might as well fill in the information at this point. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-18pktgen: fix module unload for goodEric Dumazet
commit c57b5468406 (pktgen: fix crash at module unload) did a very poor job with list primitives. 1) list_splice() arguments were in the wrong order 2) list_splice(list, head) has undefined behavior if head is not initialized. 3) We should use the list_splice_init() variant to clear pktgen_threads list. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18tilegx: enable SYSCALL_WRAPPERS supportChris Metcalf
Some discussion with the glibc mailing lists revealed that this was necessary for 64-bit platforms with MIPS-like sign-extension rules for 32-bit values. The original symptom was that passing (uid_t)-1 to setreuid() was failing in programs linked -pthread because of the "setxid" mechanism for passing setxid-type function arguments to the syscall code. SYSCALL_WRAPPERS handles ensuring that all syscall arguments end up with proper sign-extension and is thus the appropriate fix for this problem. On other platforms (s390, powerpc, sparc64, and mips) this was fixed in 2.6.28.6. The general issue is tracked as CVE-2009-0029. Cc: <stable@vger.kernel.org> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-18Merge tag 'linus-mce-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull a machine check recovery fix from Tony Luck. I really don't like how the MCE code does some of the things it does, but this does seem to be an improvement. * tag 'linus-mce-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: x86/mce: Only restart instruction after machine check recovery if it is safe
2012-05-17frv: delete incorrect task prototypes causing compile failPaul Gortmaker
Commit 41101809a865 ("fork: Provide weak arch_release_[task_struct| thread_info] functions") in -tip highlights a problem in the frv arch, where it has needles prototypes for alloc_task_struct_node and free_task_struct. This now shows up as: kernel/fork.c:120:66: error: static declaration of 'alloc_task_struct_node' follows non-static declaration kernel/fork.c:127:51: error: static declaration of 'free_task_struct' follows non-static declaration since that commit turned them into real functions. Since arch/frv does does not define define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR (i.e. it just uses the generic ones) it shouldn't list these at all. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Howells <dhowells@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17slub: missing test for partial pages flush work in flush_all()majianpeng
I found some kernel messages such as: SLUB raid5-md127: kmem_cache_destroy called for cache that still has objects. Pid: 6143, comm: mdadm Tainted: G O 3.4.0-rc6+ #75 Call Trace: kmem_cache_destroy+0x328/0x400 free_conf+0x2d/0xf0 [raid456] stop+0x41/0x60 [raid456] md_stop+0x1a/0x60 [md_mod] do_md_stop+0x74/0x470 [md_mod] md_ioctl+0xff/0x11f0 [md_mod] blkdev_ioctl+0xd8/0x7a0 block_ioctl+0x3b/0x40 do_vfs_ioctl+0x96/0x560 sys_ioctl+0x91/0xa0 system_call_fastpath+0x16/0x1b Then using kmemleak I found these messages: unreferenced object 0xffff8800b6db7380 (size 112): comm "mdadm", pid 5783, jiffies 4294810749 (age 90.589s) hex dump (first 32 bytes): 01 01 db b6 ad 4e ad de ff ff ff ff ff ff ff ff .....N.......... ff ff ff ff ff ff ff ff 98 40 4a 82 ff ff ff ff .........@J..... backtrace: kmemleak_alloc+0x21/0x50 kmem_cache_alloc+0xeb/0x1b0 kmem_cache_open+0x2f1/0x430 kmem_cache_create+0x158/0x320 setup_conf+0x649/0x770 [raid456] run+0x68b/0x840 [raid456] md_run+0x529/0x940 [md_mod] do_md_run+0x18/0xc0 [md_mod] md_ioctl+0xba8/0x11f0 [md_mod] blkdev_ioctl+0xd8/0x7a0 block_ioctl+0x3b/0x40 do_vfs_ioctl+0x96/0x560 sys_ioctl+0x91/0xa0 system_call_fastpath+0x16/0x1b This bug was introduced by commit a8364d5555b ("slub: only IPI CPUs that have per cpu obj to flush"), which did not include checks for per cpu partial pages being present on a cpu. Signed-off-by: majianpeng <majianpeng@gmail.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Tested-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17fs, proc: fix ABBA deadlock in case of execution attempt of map_files/ entriesCyrill Gorcunov
map_files/ entries are never supposed to be executed, still curious minds might try to run them, which leads to the following deadlock ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.0-rc4-24406-g841e6a6 #121 Not tainted ------------------------------------------------------- bash/1556 is trying to acquire lock: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: do_lookup+0x267/0x2b1 but task is already holding lock: (&sig->cred_guard_mutex){+.+.+.}, at: prepare_bprm_creds+0x2d/0x69 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sig->cred_guard_mutex){+.+.+.}: validate_chain+0x444/0x4f4 __lock_acquire+0x387/0x3f8 lock_acquire+0x12b/0x158 __mutex_lock_common+0x56/0x3a9 mutex_lock_killable_nested+0x40/0x45 lock_trace+0x24/0x59 proc_map_files_lookup+0x5a/0x165 __lookup_hash+0x52/0x73 do_lookup+0x276/0x2b1 walk_component+0x3d/0x114 do_last+0xfc/0x540 path_openat+0xd3/0x306 do_filp_open+0x3d/0x89 do_sys_open+0x74/0x106 sys_open+0x21/0x23 tracesys+0xdd/0xe2 -> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}: check_prev_add+0x6a/0x1ef validate_chain+0x444/0x4f4 __lock_acquire+0x387/0x3f8 lock_acquire+0x12b/0x158 __mutex_lock_common+0x56/0x3a9 mutex_lock_nested+0x40/0x45 do_lookup+0x267/0x2b1 walk_component+0x3d/0x114 link_path_walk+0x1f9/0x48f path_openat+0xb6/0x306 do_filp_open+0x3d/0x89 open_exec+0x25/0xa0 do_execve_common+0xea/0x2f9 do_execve+0x43/0x45 sys_execve+0x43/0x5a stub_execve+0x6c/0xc0 This is because prepare_bprm_creds grabs task->signal->cred_guard_mutex and when do_lookup happens we try to grab task->signal->cred_guard_mutex again in lock_trace. Fix it using plain ptrace_may_access() helper in proc_map_files_lookup() and in proc_map_files_readdir() instead of lock_trace(), the caller must be CAP_SYS_ADMIN granted anyway. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Reported-by: Sasha Levin <levinsasha928@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Jones <davej@redhat.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01Rajkumar Kasirajan
The reset date of the ST Micro version of PL031 is 2000-01-01. The correct weekday for 2000-01-01 is saturday, but pl031 is initialized to sunday. This may lead to alarm malfunction, so configure the correct wday if RTC_DR indicates reset. Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Mattias Wallin <mattias.wallin@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Small set of fixes again." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7419/1: vfp: fix VFP flushing regression on sigreturn path ARM: 7418/1: LPAE: fix access flag setup in mem_type_table ARM: prevent VM_GROWSDOWN mmaps extending below FIRST_USER_ADDRESS ARM: 7417/1: vfp: ensure preemption is disabled when enabling VFP access
2012-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull two networking fixes from David S. Miller: 1) Thanks to Willy Tarreau and Eric Dumazet, we've unlocked a bug that's been present in do_tcp_sendpages() since that function was written in 2002. When we block to wait for memory we have to unconditionally try and push out pending TCP data, otherwise we can block for an unreasonably long amount of time. 2) Fix deadlock in e1000, fixes kernel bugzilla 43132 From Tushar Dave. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: e1000: Prevent reset task killing itself. tcp: do_tcp_sendpages() must try to push data out on oom conditions
2012-05-17ACPI / PCI / PM: Fix device PM regression related to D3hot/D3coldRafael J. Wysocki
Commit 1cc0c998fdf2 ("ACPI: Fix D3hot v D3cold confusion") introduced a bug in __acpi_bus_set_power() and changed the behavior of acpi_pci_set_power_state() in such a way that it generally doesn't work as expected if PCI_D3hot is passed to it as the second argument. First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to __acpi_bus_set_power() and the explicit_set flag is set for the D3cold state, the function will try to execute AML method called "_PS4", which doesn't exist. Fix this by adding a check to ensure that the name of the AML method to execute for transitions to ACPI_STATE_D3_COLD is correct in __acpi_bus_set_power(). Also make sure that the explicit_set flag for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify acpi_power_transition() to avoid accessing power resources for ACPI_STATE_D3_COLD, because they don't exist. Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the target state, the function will request a transition to ACPI_STATE_D3_HOT instead of ACPI_STATE_D3. However, ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML method is defined for the given device, which is rare. This causes problems to happen on systems where devices were successfully put into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work now. In particular, some unused graphics adapters are not turned off as a result. To fix this issue restore the old behavior of acpi_pci_set_power_state(), which is to request a transition to ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or PCI_D3cold is passed to it as the argument. This approach is not ideal, because generally power should not be removed from devices if PCI_D3hot is the target power state, but since this behavior is relied on, we have no choice but to restore it at the moment and spend more time on designing a better solution in the future. References: https://bugzilla.kernel.org/show_bug.cgi?id=43228 Reported-by: rocko <rockorequin@hotmail.com> Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org> Reported-and-tested-by: Peter <lekensteyn@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17e1000: Prevent reset task killing itself.Tushar Dave
Killing reset task while adapter is resetting causes deadlock. Only kill reset task if adapter is not resetting. Ref bug #43132 on bugzilla.kernel.org CC: stable@vger.kernel.org Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-17tcp: do_tcp_sendpages() must try to push data out on oom conditionsWilly Tarreau
Since recent changes on TCP splicing (starting with commits 2f533844 "tcp: allow splice() to build full TSO packets" and 35f9c09f "tcp: tcp_sendpages() should call tcp_push() once"), I started seeing massive stalls when forwarding traffic between two sockets using splice() when pipe buffers were larger than socket buffers. Latest changes (net: netdev_alloc_skb() use build_skb()) made the problem even more apparent. The reason seems to be that if do_tcp_sendpages() fails on out of memory condition without being able to send at least one byte, tcp_push() is not called and the buffers cannot be flushed. After applying the attached patch, I cannot reproduce the stalls at all and the data rate it perfectly stable and steady under any condition which previously caused the problem to be permanent. The issue seems to have been there since before the kernel migrated to git, which makes me think that the stalls I occasionally experienced with tux during stress-tests years ago were probably related to the same issue. This issue was first encountered on 3.0.31 and 3.2.17, so please backport to -stable. Signed-off-by: Willy Tarreau <w@1wt.eu> Acked-by: Eric Dumazet <edumazet@google.com> Cc: <stable@vger.kernel.org>
2012-05-17Merge branch '3.4-urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull two more target-core updates from Nicholas Bellinger: "The first patch addresses a SPC-2 reservations RELEASE bug in a special (iscsi specific) multi-ISID setup case that was allowing the same initiator to be able to incorrect release it's own reservation on a different SCSI path with enforce_pr_isid=1 operation. This bug was caught by Bernhard Kohl. The second patch is to address a bug with FILEIO backends where the incorrect number of blocks for READ_CAPACITY was being reported after an underlying device-mapper block_device size change. This patch uses now i_size_read() in fd_get_blocks() for FILEIO backends with an underlying block_device, instead of trying to determine this value at setup time during fd_create_virtdevice(). (hch CC'ed) Both are CC'ed to stable." * '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix bug in handling of FILEIO + block_device resize ops target: Fix SPC-2 RELEASE bug for multi-session iSCSI client setups
2012-05-17target: Fix bug in handling of FILEIO + block_device resize opsNicholas Bellinger
This patch fixes a bug in the handling of FILEIO w/ underlying block_device resize operations where the original fd_dev->fd_dev_size was incorrectly being used in fd_get_blocks() for READ_CAPACITY response payloads. This patch avoids using fd_dev->fd_dev_size for FILEIO devices with an underlying block_device, and instead changes fd_get_blocks() to get the sector count directly from i_size_read() as recommended by hch. Reported-by: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes fromVinod Koul: "fixes of cylic dma usages in slave dma drivers" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: fix cyclic dma usage dmaengine: pl330: dont complete descriptor for cyclic dma
2012-05-17Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull last minute virtio fixes from Michael S. Tsirkin: "Here are a couple of last minute virtio fixes for 3.4. Hope it's not too late yes - I might have tried too hard to make sure the fix is well tested. Fixes are by Amit and myself. One fixes module removal and one suspend of a VM, the last one the handling of out of memory condition. They are thus very low risk as most people never hit these paths, but do fix very annoying problems for people that do use the feature. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_net: invoke softirqs after __napi_schedule virtio: balloon: let host know of updated balloon size before module removal virtio: console: tell host of open ports after resume from s3/s4
2012-05-17Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM: SoC fixes from Olof Johansson: "I will stop trying to predict when we're done with fixes for a release. Here's another small batch of three patches for arm-soc: - A fix for a boot time WARN_ON() due to irq domain conversion on PRIMA2 - Fix for a regression in Tegra SMP spinup code due to swapped register offsets - Fixed config dependency for mv_cesa crypto driver to avoid build breakage" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller crypto: mv_cesa requires on CRYPTO_HASH to build ARM: tegra: Fix flow controller accesses
2012-05-17Merge tag 'md-3.4-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull two md fixes from NeilBrown: "One fixes a bug in the new raid10 resize code so is relevant to 3.4 only. The other fixes a bug in the use of md by dm-raid, so is relevant to any kernel with dm-raid support" * tag 'md-3.4-fixes' of git://neil.brown.name/md: MD: Add del_timer_sync to mddev_suspend (fix nasty panic) md/raid10: set dev_sectors properly when resizing devices in array.
2012-05-17Merge branches 'perf-urgent-for-linus', 'x86-urgent-for-linus' and ↵Linus Torvalds
'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf, x86 and scheduler updates from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing: Do not enable function event with enable perf stat: handle ENXIO error for perf_event_open perf: Turn off compiler warnings for flex and bison generated files perf stat: Fix case where guest/host monitoring is not supported by kernel perf build-id: Fix filename size calculation * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable x86: Fix section annotation of acpi_map_cpu2node() x86/microcode: Ensure that module is only loaded on supported Intel CPUs * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix KVM and ia64 boot crash due to sched_groups circular linked list assumption
2012-05-17ARM: 7419/1: vfp: fix VFP flushing regression on sigreturn pathWill Deacon
Commit ff9a184c ("ARM: 7400/1: vfp: clear fpscr length and stride bits on entry to sig handler") flushes the VFP state prior to entering a signal handler so that a VFP operation inside the handler will trap and force a restore of ABI-compliant registers. Reflushing and disabling VFP on the sigreturn path is predicated on the saved thread state indicating that VFP was used by the handler -- however for SMP platforms this is only set on context-switch, making the check unreliable and causing VFP register corruption in userspace since the register values are not necessarily those restored from the sigframe. This patch unconditionally flushes the VFP state after a signal handler. Since we already perform the flush before the handler and the flushing itself happens lazily, the redundant flush when VFP is not used by the handler is essentially a nop. Reported-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-17ARM: 7418/1: LPAE: fix access flag setup in mem_type_tableVitaly Andrianov
A zero value for prot_sect in the memory types table implies that section mappings should never be created for the memory type in question. This is checked for in alloc_init_section(). With LPAE, we set a bit to mask access flag faults for kernel mappings. This breaks the aforementioned (!prot_sect) check in alloc_init_section(). This patch fixes this bug by first checking for a non-zero prot_sect before setting the PMD_SECT_AF flag. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-17virtio_net: invoke softirqs after __napi_scheduleMichael S. Tsirkin
__napi_schedule might raise softirq but nothing causes do_softirq to trigger, so it does not in fact run. As a result, the error message "NOHZ: local_softirq_pending 08" sometimes occurs during boot of a KVM guest when the network service is started and we are oom: ... Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0...NOHZ: local_softirq_pending 08 done. [ OK ] ... Further, receive queue processing might get delayed indefinitely until some interrupt triggers: virtio_net expected napi to be run immediately. One way to cause do_softirq to be executed is by invoking local_bh_enable(). As __napi_schedule is normally called from bh or irq context, this seems to make sense: disable bh before __napi_schedule and enable afterwards. In fact it's a very complicated way of calling do_softirq(), and works since this function is only used when we are not in interrupt context. It's not hot at all, in any ideal scenario. Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Tested-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-17virtio: balloon: let host know of updated balloon size before module removalAmit Shah
When the balloon module is removed, we deflate the balloon, reclaiming all the pages that were given to the host. However, we don't update the config values for the new balloon size, resulting in the host showing outdated balloon values. The size update is done after each leak and fill operation, only the module removal case was left out. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-05-17virtio: console: tell host of open ports after resume from s3/s4Amit Shah
If a port was open before going into one of the sleep states, the port can continue normal operation after restore. However, the host has to be told that the guest side of the connection is open to restore pre-suspend state. This wasn't noticed so far due to a bug in qemu that was fixed recently (which marked the guest-side connection as always open). CC: stable@vger.kernel.org # Only for 3.3 Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-05-16ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controllerBarry Song
the old codes will cause 3.4 kernel warning as irq domain size is wrong: ------------[ cut here ]------------ WARNING: at kernel/irq/irqdomain.c:74 irq_domain_legacy_revmap+0x24/0x48() Modules linked in: [<c0013f50>] (unwind_backtrace+0x0/0xf8) from [<c001e7d8>] (warn_slowpath_common+0x54/0x64) [<c001e7d8>] (warn_slowpath_common+0x54/0x64) from [<c001e804>] (warn_slowpath_null+0x1c/0x24) [<c001e804>] (warn_slowpath_null+0x1c/0x24) from [<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48) [<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48) from [<c005c704>] (irq_create_mapping+0x20/0x120) [<c005c704>] (irq_create_mapping+0x20/0x120) from [<c005c880>] (irq_create_of_mapping+0x7c/0xf0) [<c005c880>] (irq_create_of_mapping+0x7c/0xf0) from [<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34) [<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34) from [<c01a6c68>] (of_irq_to_resource+0x18/0x74) [<c01a6c68>] (of_irq_to_resource+0x18/0x74) from [<c01a6ce8>] (of_irq_count+0x24/0x34) [<c01a6ce8>] (of_irq_count+0x24/0x34) from [<c01a7220>] (of_device_alloc+0x58/0x158) [<c01a7220>] (of_device_alloc+0x58/0x158) from [<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80) [<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80) from [<c01a7468>] (of_platform_bus_create+0xc8/0x190) [<c01a7468>] (of_platform_bus_create+0xc8/0x190) from [<c01a74cc>] (of_platform_bus_create+0x12c/0x190) ---[ end trace 1b75b31a2719ed32 ]--- Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-17MD: Add del_timer_sync to mddev_suspend (fix nasty panic)Jonathan Brassow
Use del_timer_sync to remove timer before mddev_suspend finishes. We don't want a timer going off after an mddev_suspend is called. This is especially true with device-mapper, since it can call the destructor function immediately following a suspend. This results in the removal (kfree) of the structures upon which the timer depends - resulting in a very ugly panic. Therefore, we add a del_timer_sync to mddev_suspend to prevent this. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-17md/raid10: set dev_sectors properly when resizing devices in array.NeilBrown
raid10 stores dev_sectors in 'conf' separately from the one in 'mddev' because it can have a very significant effect on block addressing and so need to be updated carefully. However raid10_resize isn't updating it at all! To update it correctly, we need to make sure it is a proper multiple of the chunksize taking various details of the layout in to account. This calculation is currently done in setup_conf. So split it out from there and call it from raid10_resize as well. Then set conf->dev_sectors properly. Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-16Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm powerpc fixes from Marcelo Tosatti: "Urgent KVM PPC updates, quoting Alexander Graf: There are a few bugs in 3.4 that really should be fixed before people can be all happy and fuzzy about KVM on PowerPC. These fixes are: * fix POWER7 bare metal with PR=y * fix deadlock on HV=y book3s_64 mode in low memory cases * fix invalid MMU scope of PR=y mode on book3s_64, possibly eading to memory corruption" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix bug leading to deadlock in guest HPT updates powerpc/kvm: Fix VSID usage in 64-bit "PR" KVM KVM: PPC: Book3S: PR: Fix hsrr code KVM: PPC: Fix PR KVM on POWER7 bare metal KVM: PPC: Book3S: PR: Handle EMUL_ASSIST
2012-05-16Merge tag 'sound-3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few last-minute regression fixes for 3.4 final kernel. All trivial, and Cc'ed to stable kernel." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm8994: Fix AIF2ADC power down ALSA: hda/idt - Fix power-map for speaker-pins with some HP laptops ASoC: cs42l73: Sync digital mixer kcontrols to allow for 0dB
2012-05-16Merge tag 'rproc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc Pull remoteproc fix from Ohad Ben-Cohen: "Fix a nasty off-by-one remoteproc bug which leaks memory when a remote processor is shut down and, on certain circumstances, can indirectly prevent it from being reloaded." * tag 'rproc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc: fix off-by-one bug in __rproc_free_vrings
2012-05-16Merge git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS fix from Jeff Layton * git://git.samba.org/sfrench/cifs-2.6: cifs: fix misspelling of "forcedirectio"
2012-05-16Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull two Tile arch fixes from Chris Metcalf: "These are both bug-fixes, one to avoid some issues in how we invoke the "pending userspace work" flags on return to userspace, and the other to provide the same signal handler arguments for tilegx32 that we do for tilegx64." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: apply commit 74fca9da0 to the compat signal handling as well arch/tile: fix up some issues in calling do_work_pending()
2012-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking tree from David Miller: 1) ptp_pch driver build broke during this merge window due to missing slab.h header, fix from Geery Uytterhoeven. 2) If ipset passes in a bogus hash table size we crash because the size is not validated properly. Compounding this, gcc-4.7 can miscompile ipset such that even when the user specifies legitimate parameters the tool passes in an out-of-range size to the kernel. Fix from Jozsef Kadlecsik. 3) Users have reported that the netdev watchdog can trigger with pch_gbe devices, and it turns out this is happening because of races in the TX path of the driver leading to the transmitter hanging. Fix from Eric Dumazet, reported and tested by Andy Cress. 4) Novatel USB551L devices match the generic class entries for the cdc ethernet USB driver, but they don't work because they have generic descriptors and thus need FLAG_WWAN to function properly. Add the necessary ID table entry to fix this, from Dan Williams. 5) A recursive locking fix in the USBNET driver added a new problem, in that packet list traversal is now racy and we can thus access unlinked SKBs and crash. Avoid this situation by adding some extra state tracking, from Ming Lei. 6) The rtlwifi conversion to asynchronous firmware loading is racy, fix by reordering the probe procedure. From Larry Finger. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=43187 7) Fix regressions with bluetooth keyboards by notifying userland properly when the security level changes, from Gustavo Padovan. 8) Bluetooth needs to make sure device connected events are emitted before other kinds of events, otherwise userspace will think there is no baseband link yet and therefore abort the sockets associated with that connection. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: ipset: fix hash size checking in kernel ptp_pch: Add missing #include <linux/slab.h> pch_gbe: fix transmit races cdc_ether: add Novatel USB551L device IDs for FLAG_WWAN usbnet: fix skb traversing races during unlink(v2) Bluetooth: mgmt: Fix device_connected sending order Bluetooth: notify userspace of security level change rtlwifi: fix for race condition when firmware is cached
2012-05-16arch/tile: apply commit 74fca9da0 to the compat signal handling as wellChris Metcalf
This passes siginfo and mcontext to tilegx32 signal handlers that don't have SA_SIGINFO set just as we have been doing for tilegx64. Cc: stable@vger.kernel.org Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-16arch/tile: fix up some issues in calling do_work_pending()Chris Metcalf
First, we were at risk of handling thread-info flags, in particular do_signal(), when returning from kernel space. This could happen after a failed kernel_execve(), or when forking a kernel thread. The fix is to test in do_work_pending() for user_mode() and return immediately if so; we already had this test for one of the flags, so I just hoisted it to the top of the function. Second, if a ptraced process updated the callee-saved registers in the ptregs struct and then processed another thread-info flag, we would overwrite the modifications with the original callee-saved registers. To fix this, we add a register to note if we've already saved the registers once, and skip doing it on additional passes through the loop. To avoid a performance hit from the couple of extra instructions involved, I modified the GET_THREAD_INFO() macro to be guaranteed to be one instruction, then bundled it with adjacent instructions, yielding an overall net savings. Reported-By: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-16netfilter: ipset: fix hash size checking in kernelJozsef Kadlecsik
The hash size must fit both into u32 (jhash) and the max value of size_t. The missing checking could lead to kernel crash, bug reported by Seblu. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16ptp_pch: Add missing #include <linux/slab.h>Geert Uytterhoeven
drivers/ptp/ptp_pch.c: In function 'pch_remove': drivers/ptp/ptp_pch.c:576:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] drivers/ptp/ptp_pch.c: In function 'pch_probe': drivers/ptp/ptp_pch.c:587:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16cifs: fix misspelling of "forcedirectio"Jeff Layton
...and add a "directio" synonym since that's what the manpage has always advertised. Acked-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-16ARM: prevent VM_GROWSDOWN mmaps extending below FIRST_USER_ADDRESSRussell King
Cc: <stable@vger.kernel.org> Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-16Merge branch 'for-3.4/fixes-for-final' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into fixes * 'for-3.4/fixes-for-final' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: Fix flow controller accesses Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-16Merge branch 'marvell_fixes_for_v3.4' of ↵Arnd Bergmann
git://git.infradead.org/users/jcooper/linux into fixes * 'marvell_fixes_for_v3.4' of git://git.infradead.org/users/jcooper/linux: crypto: mv_cesa requires on CRYPTO_HASH to build Signed-off-by: Arnd Bergmann <arnd@arndb.de>