summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-14Merge tag 'timers-core-2020-08-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of posix CPU timer changes which allows to defer the heavy work of posix CPU timers into task work context. The tick interrupt is reduced to a quick check which queues the work which is doing the heavy lifting before returning to user space or going back to guest mode. Moving this out is deferring the signal delivery slightly but posix CPU timers are inaccurate by nature as they depend on the tick so there is no real damage. The relevant test cases all passed. This lifts the last offender for RT out of the hard interrupt context tick handler, but it also has the general benefit that the actual heavy work is accounted to the task/process and not to the tick interrupt itself. Further optimizations are possible to break long sighand lock hold and interrupt disabled (on !RT kernels) times when a massive amount of posix CPU timers (which are unpriviledged) is armed for a task/process. This is currently only enabled for x86 because the architecture has to ensure that task work is handled in KVM before entering a guest, which was just established for x86 with the new common entry/exit code which got merged post 5.8 and is not the case for other KVM architectures" * tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Select POSIX_CPU_TIMERS_TASK_WORK posix-cpu-timers: Provide mechanisms to defer timer handling to task_work posix-cpu-timers: Split run_posix_cpu_timers()
2020-08-14Merge tag 'irq-urgent-2020-08-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two fixes in the core interrupt code which ensure that all error exits unlock the descriptor lock" * tag 'irq-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Unlock irq descriptor after errors genirq/PM: Always unlock IRQ descriptor in rearm_wake_irq()
2020-08-14Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC updates from Stafford Horne: "A few patches all over the place during this cycle, mostly bug and sparse warning fixes for OpenRISC, but a few enhancements too. Note, there are 2 non OpenRISC specific fixups. Non OpenRISC fixes: - In init we need to align the init_task correctly to fix an issue with MUTEX_FLAGS, reviewed by Peter Z. No one picked this up so I kept it on my tree. - In asm-generic/io.h I fixed up some sparse warnings, OK'd by Arnd. Arnd asked to merge it via my tree. OpenRISC fixes: - Many fixes for OpenRISC sprase warnings. - Add support OpenRISC SMP tlb flushing rather than always flushing the entire TLB on every CPU. - Fix bug when dumping stack via /proc/xxx/stack of user threads" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: uaccess: Add user address space check to access_ok openrisc: signal: Fix sparse address space warnings openrisc: uaccess: Remove unused macro __addr_ok openrisc: uaccess: Use static inline function in access_ok openrisc: uaccess: Fix sparse address space warnings openrisc: io: Fixup defines and move include to the end asm-generic/io.h: Fix sparse warnings on big-endian architectures openrisc: Implement proper SMP tlb flushing openrisc: Fix oops caused when dumping stack openrisc: Add support for external initrd images init: Align init_task to avoid conflict with MUTEX_FLAGS openrisc: fix __user in raw_copy_to_user()'s prototype
2020-08-14Merge tag 'powerpc-5.9-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for a boot crash on some platforms introduced by the recent pkey refactoring. Thanks to Christian Zigotzky and Aneesh Kumar K.V" * tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)
2020-08-14Merge tag 'for-linus-5.9-rc1b-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - Remove support for running as 32-bit Xen PV-guest. 32-bit PV guests are rarely used, are lacking security fixes for Meltdown, and can be easily replaced by PVH mode. Another series for doing more cleanup will follow soon (removal of 32-bit-only pvops functionality). - Fixes and additional features for the Xen display frontend driver. * tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: drm/xen-front: Pass dumb buffer data offset to the backend xen: Sync up with the canonical protocol definition in Xen drm/xen-front: Add YUYV to supported formats drm/xen-front: Fix misused IS_ERR_OR_NULL checks xen/gntdev: Fix dmabuf import with non-zero sgt offset x86/xen: drop tests for highmem in pv code x86/xen: eliminate xen-asm_64.S x86/xen: remove 32-bit Xen PV guest support
2020-08-14Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyper-v fixes from Wei Liu: - fix oops reporting on Hyper-V - make objtool happy * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Make hv_setup_sched_clock inline Drivers: hv: vmbus: Only notify Hyper-V for die events that are oops
2020-08-14x86/fsgsbase/64: Fix NULL deref in 86_fsgsbase_read_taskEric Dumazet
syzbot found its way in 86_fsgsbase_read_task() and triggered this oops: KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 6866 Comm: syz-executor262 Not tainted 5.8.0-syzkaller #0 RIP: 0010:x86_fsgsbase_read_task+0x16d/0x310 arch/x86/kernel/process_64.c:393 Call Trace: putreg32+0x3ab/0x530 arch/x86/kernel/ptrace.c:876 genregs32_set arch/x86/kernel/ptrace.c:1026 [inline] genregs32_set+0xa4/0x100 arch/x86/kernel/ptrace.c:1006 copy_regset_from_user include/linux/regset.h:326 [inline] ia32_arch_ptrace arch/x86/kernel/ptrace.c:1061 [inline] compat_arch_ptrace+0x36c/0xd90 arch/x86/kernel/ptrace.c:1198 __do_compat_sys_ptrace kernel/ptrace.c:1420 [inline] __se_compat_sys_ptrace kernel/ptrace.c:1389 [inline] __ia32_compat_sys_ptrace+0x220/0x2f0 kernel/ptrace.c:1389 do_syscall_32_irqs_on arch/x86/entry/common.c:84 [inline] __do_fast_syscall_32+0x57/0x80 arch/x86/entry/common.c:126 do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:149 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c This can happen if ptrace() or sigreturn() pokes an LDT selector into FS or GS for a task with no LDT and something tries to read the base before a return to usermode notices the bad selector and fixes it. The fix is to make sure ldt pointer is not NULL. Fixes: 07e1d88adaae ("x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately") Co-developed-by: Jann Horn <jannh@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Chang S. Bae <chang.seok.bae@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Markus T Metzger <markus.t.metzger@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a regression in af_alg" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algif_aead - fix uninitialized ctx->init
2020-08-14Merge tag 'modules-for-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "The most important change would be Christoph Hellwig's patch implementing proprietary taint inheritance, in an effort to discourage the creation of GPL "shim" modules that interface between GPL symbols and proprietary symbols. Summary: - Have modules that use symbols from proprietary modules inherit the TAINT_PROPRIETARY_MODULE taint, in an effort to prevent GPL shim modules that are used to circumvent _GPL exports. These are modules that claim to be GPL licensed while also using symbols from proprietary modules. Such modules will be rejected while non-GPL modules will inherit the proprietary taint. - Module export space cleanup. Unexport symbols that are unused outside of module.c or otherwise used in only built-in code" * tag 'modules-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: modules: inherit TAINT_PROPRIETARY_MODULE modules: return licensing information from find_symbol modules: rename the licence field in struct symsearch to license modules: unexport __module_address modules: unexport __module_text_address modules: mark each_symbol_section static modules: mark find_symbol static modules: mark ref_module static modules: linux/moduleparam.h: drop duplicated word in a comment
2020-08-14Merge tag 'kconfig-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - remove '---help---' keyword support - fix mouse events for 'menuconfig' symbols in search view of qconf - code cleanups of qconf * tag 'kconfig-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits) kconfig: qconf: move setOptionMode() to ConfigList from ConfigView kconfig: qconf: do not limit the pop-up menu to the first row kconfig: qconf: refactor icon setups kconfig: qconf: remove unused voidPix, menuInvPix kconfig: qconf: remove ConfigItem::text/setText kconfig: qconf: remove ConfigList::addColumn/removeColumn kconfig: qconf: remove ConfigItem::pixmap/setPixmap kconfig: qconf: drop more localization code kconfig: qconf: remove 'parent' from ConfigList::updateMenuList() kconfig: qconf: remove unused argument from ConfigView::updateList() kconfig: qconf: remove unused argument from ConfigList::updateList() kconfig: qconf: omit parent to QHBoxLayout() kconfig: qconf: remove name from ConfigSearchWindow constructor kconfig: qconf: remove unused ConfigList::listView() kconfig: qconf: overload addToolBar() to create and insert toolbar kconfig: qconf: remove toolBar from ConfigMainWindow members kconfig: qconf: use 'menu' variable for (QMenu *) kconfig: qconf: do not use 'menu' variable for (QMenuBar *) kconfig: qconf: remove ->addSeparator() to menuBar kconfig: add 'static' to some file-local data ...
2020-08-14Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: intel_pstate: Implement passive mode with HWP enabled
2020-08-14dt-bindings: Remove more cases of 'allOf' containing a '$ref'Rob Herring
Another wack-a-mole pass of killing off unnecessary 'allOf + $ref' usage. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-14dt-bindings: Whitespace clean-ups in schema filesRob Herring
Clean-up incorrect indentation, extra spaces, long lines, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (which I plan to integrate into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-14perf ftrace: Make option description initials all capital lettersArnaldo Carvalho de Melo
And improve a bit the -m description to state that a B/K/M/G suffix is needed. Cc: Changbin Du <changbin.du@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf build-ids: Fall back to debuginfod query if debuginfo not foundFrank Ch. Eigler
During a perf-record, use the -ldebuginfod API to query a debuginfod server, should the debug data not be found in the usual system locations. If successful, the usual $HOME/.debug dir is populated. Tested with: $ find . . ./ctags-debuginfo-5.8-26.fc31.x86_64.rpm ./usr ./usr/lib ./usr/lib/debug ./usr/lib/debug/.build-id ./usr/lib/debug/.build-id/ca ./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d ./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d.debug ./usr/lib/debug/usr ./usr/lib/debug/usr/bin ./usr/lib/debug/usr/bin/ctags-5.8-26.fc31.x86_64.debug $ debuginfod -F . ... $ rm -rf ~/.debug/ ; mkdir ~/.debug $ perf record make tags BUILD: Doing 'make -j8' parallel build GEN tags [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.107 MB perf.data (1483 samples) ] $ find ~/.debug | grep ctags /home/jolsa/.debug/usr/bin/ctags /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes $ rm -rf ~/.debug/ ; mkdir ~/.debug $ DEBUGINFOD_URLS=http://localhost:8002 perf record make tags BUILD: Doing 'make -j8' parallel build GEN tags [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.108 MB perf.data (1531 samples) ] $ find ~/.debug | grep ctag /home/jolsa/.debug/usr/bin/ctags /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/debug /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes Note the 'debug' file is created in the last run. Note that currently the debuginfo data are downloaded only on record path, we still need add this support to perf build-id/report.. and test ;-) Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Frank Ch. Eigler <fche@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf bench numa: Remove dead code in parse_nodes_opt()Peng Fan
In the function parse_nodes_opt(), the statement "return 0;" is dead code, remove it. Signed-off-by: Peng Fan <fanpeng@loongson.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/1597401894-27549-1-git-send-email-fanpeng@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf stat: Update POWER9 metrics to utilize other metricsPaul A. Clarke
These changes take advantage of the new capability added in merge commit 00e4db51259a5f936fec1424b884f029479d3981 "Allow using computed metrics in calculating other metrics". The net is a simplification of the expressions for a handful of metrics, but no functional change. Signed-off-by: Paul Clarke <pc@us.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200813222155.268183-1-pc@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add change logChangbin Du
Add a change log after previous enhancements. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-19-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf: ftrace: Add set_tracing_options() to set all trace optionsChangbin Du
Now the __cmd_ftrace() becomes a bit long. This moves the trace option setting code to a separate function set_tracing_options(). Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-18-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option --tid to filter by thread idChangbin Du
This allows us to trace single thread instead of the whole process. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-17-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option -D/--delay to delay tracingChangbin Du
This adds an option '-D/--delay' to allow us to start tracing some times later after workload is launched. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-16-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf: ftrace: Allow set graph depth by '--graph-opts'Changbin Du
This is to have a consistent view of all graph tracer options. The original option '--graph-depth' is marked as deprecated. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-15-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add support for trace option tracing_threshChangbin Du
This adds an option '--graph-opts thresh' to setup trace duration threshold for funcgraph tracer. $ sudo ./perf ftrace -G '*' --graph-opts thresh=100 3) ! 184.060 us | } /* schedule */ 3) ! 185.600 us | } /* exit_to_usermode_loop */ 2) ! 225.989 us | } /* schedule_idle */ 2) # 4140.051 us | } /* do_idle */ Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-14-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option 'verbose' to show more info for graph tracerChangbin Du
Sometimes we want ftrace display more and longer information about the trace. $ sudo perf ftrace -G '*' 2) 0.979 us | mutex_unlock(); 2) 1.540 us | __fsnotify_parent(); 2) 0.433 us | fsnotify(); $ sudo perf ftrace -G '*' --graph-opts verbose 14160.770883 | 0) <...>-47814 | .... | 1.289 us | mutex_unlock(); 14160.770886 | 0) <...>-47814 | .... | 1.624 us | __fsnotify_parent(); 14160.770887 | 0) <...>-47814 | .... | 0.636 us | fsnotify(); 14160.770888 | 0) <...>-47814 | .... | 0.328 us | __sb_end_write(); 14160.770888 | 0) <...>-47814 | d... | 0.430 us | fpregs_assert_state_consistent(); 14160.770889 | 0) <...>-47814 | d... | | do_syscall_64() { 14160.770889 | 0) <...>-47814 | .... | | __x64_sys_close() { Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-13-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add support for tracing option 'irq-info'Changbin Du
This adds support to display irq context info for function tracer. To do this, just specify a '--func-opts irq-info' option. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-12-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add support for trace option funcgraph-irqsChangbin Du
This adds an option '--graph-opts noirqs' to filter out functions executed in irq context. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-11-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add support for trace option sleep-timeChangbin Du
This adds an option '--graph-opts nosleep-time' which allow us only to measure on-CPU time. This option is function_graph tracer only. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-10-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add support for tracing option 'func_stack_trace'Changbin Du
This adds support to display call trace for function tracer. To do this, just specify a '--func-opts call-graph' option. Example: $ sudo perf ftrace -T vfs_read --func-opts call-graph iio-sensor-prox-855 [003] 6168.369657: vfs_read <-ksys_read iio-sensor-prox-855 [003] 6168.369677: <stack trace> => vfs_read => ksys_read => __x64_sys_read => do_syscall_64 => entry_SYSCALL_64_after_hwframe ... Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-9-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf tools: Add general function to parse sublevel optionsChangbin Du
This factors out a general function perf_parse_sublevel_options() to parse sublevel options. The 'sublevel' options is something like the '--debug' options which allow more sublevel options. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-8-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option '--inherit' to trace children processesChangbin Du
This adds an option '--inherit' to allow us trace children processes spawned by our target. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-7-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Show trace column headerChangbin Du
This makes 'perf ftrace' display column header before printing trace. $ sudo perf ftrace # tracer: function # # entries-in-buffer/entries-written: 0/0 #P:8 # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <...>-9246 [006] 10726.262760: mutex_unlock <-rb_simple_write <...>-9246 [006] 10726.262764: __fsnotify_parent <-vfs_write <...>-9246 [006] 10726.262765: fsnotify <-vfs_write <...>-9246 [006] 10726.262766: __sb_end_write <-vfs_write <...>-9246 [006] 10726.262767: fpregs_assert_state_consistent <-do_syscall_64 Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-6-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer sizeChangbin Du
This adds an option '-m/--buffer-size' to allow us set the size of per-cpu tracing buffer. Committer testing: Before running with this option: # find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat 1408 1408 1408 1408 1408 1408 1408 1408 1408 # Then, run: # perf ftrace -m 2048K | head -10 2) | mutex_unlock() { 2) ==========> | 2) | smp_irq_work_interrupt() { 2) | irq_enter() { 2) 0.121 us | rcu_irq_enter(); 2) 0.128 us | irqtime_account_irq(); 2) 0.719 us | } 2) | __wake_up() { 2) | __wake_up_common_lock() { 2) 0.105 us | _raw_spin_lock_irqsave(); # Now look at those tracefs knobs: # find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat 2048 2048 2048 2048 2048 2048 2048 2048 2048 # This should be similar to the -m option in the other perf tools, such as 'perf record', 'perf trace', etc. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-5-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Factor out function write_tracing_file_int()Changbin Du
We will reuse this function later. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-4-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Add option '-F/--funcs' to list available functionsChangbin Du
This adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file 'available_filter_functions'. $ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_context $ Committer notes: This is the same command line option and for the same purpose as in 'perf probe'. Signed-off-by: Changbin Du <changbin.du@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-3-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14perf ftrace: Select function/function_graph tracer automaticallyChangbin Du
The '-g/-G' options have already implied function_graph tracer should be used instead of function tracer. So we don't need extra option '--tracer' in this case. This patch changes the behavior as below: - If '-g' or '-G' option is on, then function_graph tracer is used. - If '-T' or '-N' option is on, then function tracer is used. - The function_graph has priority over function tracer. - The option '--tracer' only take effect if neither -g/-G nor -T/-N is specified. Here are some examples. This will start tracing all functions using default tracer: $ sudo perf ftrace This will trace all functions using function graph tracer: $ sudo perf ftrace -G '*' This will trace function vfs_read using function graph tracer: $ sudo perf ftrace -G vfs_read This will trace function vfs_read using function tracer: $ sudo perf ftrace -T vfs_read Committer notes: Using '-h -G' will tell what that option is about, so to further clarify the above examples: # perf ftrace -h -G -G, --graph-funcs <func> Set graph filter on given functions # perf ftrace -h -g -g, --nograph-funcs <func> Set nograph filter on given functions # perf ftrace -h -T -T, --trace-funcs <func> trace given functions only # perf ftrace -h -N -N, --notrace-funcs <func> do not trace given functions # Signed-off-by: Changbin Du <changbin.du@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200808023141.14227-2-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-14sched/debug: Fix the alignment of the show-state debug outputLibing Zhou
Current sysrq(t) output task fields name are not aligned with actual task fields value, e.g.: kernel: sysrq: Show State kernel: task PC stack pid father kernel: systemd S12456 1 0 0x00000000 kernel: Call Trace: kernel: ? __schedule+0x240/0x740 To make it more readable, print fields name together with task fields value in the same line, with fixed width: kernel: sysrq: Show State kernel: task:systemd state:S stack:12920 pid: 1 ppid: 0 flags:0x00000000 kernel: Call Trace: kernel: __schedule+0x282/0x620 Signed-off-by: Libing Zhou <libing.zhou@nokia-sbell.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200814030236.37835-1-libing.zhou@nokia-sbell.com
2020-08-14perf/x86/rapl: Add support for Intel SPR platformZhang Rui
Intel SPR platform uses fixed 16 bit energy unit for DRAM RAPL domain, and fixed 0 bit energy unit for Psys RAPL domain. After this, on SPR platform the energy counters appear in perf list. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Len Brown <len.brown@intel.com> Link: https://lore.kernel.org/r/20200811153149.12242-4-rui.zhang@intel.com
2020-08-14perf/x86/rapl: Support multiple RAPL unit quirksZhang Rui
There will be more platforms with different fixed energy units. Enhance the code to support different RAPL unit quirks for different platforms. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Len Brown <len.brown@intel.com> Link: https://lore.kernel.org/r/20200811153149.12242-3-rui.zhang@intel.com
2020-08-14perf/x86/rapl: Fix missing psys sysfs attributesZhang Rui
This fixes a problem introduced by commit: 5fb5273a905c ("perf/x86/rapl: Use new MSR detection interface") that perf event sysfs attributes for psys RAPL domain are missing. Fixes: 5fb5273a905c ("perf/x86/rapl: Use new MSR detection interface") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Len Brown <len.brown@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20200811153149.12242-2-rui.zhang@intel.com
2020-08-14kconfig: qconf: move setOptionMode() to ConfigList from ConfigViewMasahiro Yamada
ConfigView::setOptionMode() only gets access to the 'list' member. Move it to the more relevant ConfigList class. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-14kconfig: qconf: do not limit the pop-up menu to the first rowMasahiro Yamada
If you right-click the first row in the option tree, the pop-up menu shows up, but if you right-click the second row or below, the event is ignored due to the following check: if (e->y() <= header()->geometry().bottom()) { Perhaps, the intention was to show the pop-menu only when the tree header was right-clicked, but this handler is not called in that case. Since the origin of e->y() starts from the bottom of the header, this check is odd. Going forward, you can right-click anywhere in the tree to get the pop-up menu. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-14kconfig: qconf: refactor icon setupsMasahiro Yamada
These icon data are used by ConfigItem, but stored in each instance of ConfigView. There is no point to keep the same data in each of 3 instances, "menu", "config", and "search". Move the icon data to the more relevant ConfigItem class, and make them static members. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-14kconfig: qconf: remove unused voidPix, menuInvPixMasahiro Yamada
These are initialized, but not used by anyone. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-14kconfig: qconf: remove ConfigItem::text/setTextMasahiro Yamada
Use QTreeWidgetItem::text/setText directly Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-14kconfig: qconf: remove ConfigList::addColumn/removeColumnMasahiro Yamada
Use QTreeView::showColumn/hideColumn directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-14kconfig: qconf: remove ConfigItem::pixmap/setPixmapMasahiro Yamada
Use QTreeWidgetItem::icon/setIcon directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-14kconfig: qconf: drop more localization codeMasahiro Yamada
This is a remnant of commit 694c49a7c01c ("kconfig: drop localization support"). Get it back to the code prior to commit 3b9fa0931dd8 ("[PATCH] Kconfig i18n support"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-14kconfig: qconf: remove 'parent' from ConfigList::updateMenuList()Masahiro Yamada
All the call-sites of this function pass 'this' to the first argument. So, 'parent' is always the 'this' pointer. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-14kconfig: qconf: remove unused argument from ConfigView::updateList()Masahiro Yamada
Now that ConfigList::updateList() takes no argument, the 'item' argument ConfigView::updateList() is no longer used. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-14kconfig: qconf: remove unused argument from ConfigList::updateList()Masahiro Yamada
This function allocates 'item' before using it, so the argument 'item' is always shadowed. Remove the meaningless argument. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:03:39 +0000