summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-12mac80211: Fix mesh-related build breakage...Yogesh Ashok Powar
net/mac80211/cfg.c: In function ‘sta_apply_parameters’: net/mac80211/cfg.c:746: error: ‘struct sta_info’ has no member named ‘plink_state’ make[1]: *** [net/mac80211/cfg.o] Error 1 make: *** [net/mac80211/mac80211.ko] Error 2 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11cfg80211/nl80211: add interval attribute for scheduled scansLuciano Coelho
Introduce NL80211_ATTR_SCHED_SCAN_INTERVAL as a required attribute for NL80211_CMD_START_SCHED_SCAN. This value informs the driver at which intervals the scheduled scan cycles should be executed. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: add support for HW scheduled scanLuciano Coelho
Implement support for HW scheduled scan. The mac80211 code doesn't perform scheduled scans itself, but calls the driver to start and stop scheduled scans. This patch also creates a trace event class to be used by drv_hw_scan and the new drv_sched_scan_start and drv_sched_stop functions, in order to avoid duplicate code. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11cfg80211/nl80211: add support for scheduled scansLuciano Coelho
Implement new functionality for scheduled scan offload. With this feature we can scan automatically at certain intervals. The idea is that the hardware can perform scan automatically and filter on desired results without waking up the host unnecessarily. Add NL80211_CMD_START_SCHED_SCAN and NL80211_CMD_STOP_SCHED_SCAN commands to the nl80211 interface. When results are available they are reported by NL80211_CMD_SCHED_SCAN_RESULTS events. The userspace is informed when the scheduled scan has stopped with a NL80211_CMD_SCHED_SCAN_STOPPED event, which can be triggered either by the driver or by a call to NL80211_CMD_STOP_SCHED_SCAN. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11libertas: Add libertas_disablemesh module parameter to disable mesh interfaceSascha Silbe
This allows individual users and deployments to disable mesh support at runtime, i.e. without having to build and maintain a custom kernel. Based on a patch by Paul Fox <pgf@laptop.org>. Signed-off-by: Sascha Silbe <silbe@activitycentral.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mwifiex: cleanup ioctl.hBing Zhao
Some structures and macros in ioctl.h are redundant or no longer used. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mwifiex: remove redundant local structuresAmitkumar Karwar
Avoid use of local structure in the function if the structure is already allocated by the caller and the structure pointer is passed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11b43: implement timeouts workaroundRafał Miłecki
Documented in: <4DCA7E40.9070709@lwfinger.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ssb: move ssb_commit_settings and export itRafał Miłecki
Commiting settings is possible on devices without PCI core (but with CC core). Export it for usage in drivers supporting other cores. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11bcma: add missing GPIO defines, use PULL register only when availableRafał Miłecki
Similar patch was commited to ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ath9k: fix a regression in PS frame filter handlingFelix Fietkau
Only leave filtering enabled for AP or VLAN interfaces, clear the destination mask for all other interfaces. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11b43: move MAC PHY clock controling functionRafał Miłecki
This is not N-PHY specific function, we partially duplicate code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11b43legacy: trivial: use TMSLOW def instead of magic valueRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: add a couple of trace event classes to reduce duplicated codeLuciano Coelho
The functions drv_add_interface() and drv_remove_interface() print out the same values in the traces. Combine the traces of these two functions into one event class to remove some duplicate code. Also add a new class for functions drv_set_frag_threshold() and drv_set_rts_threshold(). Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ath5k: Fix lockup due to un-init spinlock.Ben Greear
This was introduced in 2.6.39-rc1 it seems. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Only process mesh PREPs with equal seq number if metric is better.Fabrice Deyber
This fixes routing loops in PREP propagation and is in accordance with Draft 11, Section: 11C.9.8.4. Signed-off-by: Fabrice Deyber <fabricedeyber@agilemesh.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ath9k: fix beaconing for mesh interfacesJavier Cardona
Mesh beaconing on ath9k was broken by this commit: commit 4801416c76a3a355076d6d371c00270dfe332e1c Author: Ben Greear <greearb@candelatech.com> Date: Sat Jan 15 19:13:48 2011 +0000 This patch assigns the right opmode when the device is used in mesh mode. Reported-by: Fabrice Deyber fabricedeyber@agilemesh.com Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: allow setting supported rates on mesh peersJavier Cardona
This is necessary for userspace managed stations. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Move call to mpp_path_lookup inside RCU-read sectionJavier Cardona
PROVE_RCU caught that one: [ 431.214070] =================================================== [ 431.215341] [ INFO: suspicious rcu_dereference_check() usage. ] [ 431.215674] --------------------------------------------------- [ 431.216043] net/mac80211/mesh_pathtbl.c:184 invoked rcu_dereference_check() without protection! Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Fix locking bug on mesh path table accessJavier Cardona
The mesh and mpp path tables are accessed from softirq and workqueue context so non-irq locking cannot be used. Or at least that's what PROVE_RCU seems to tell us here: [ 431.240946] ================================= [ 431.241061] [ INFO: inconsistent lock state ] [ 431.241061] 2.6.39-rc3-wl+ #354 [ 431.241061] --------------------------------- [ 431.241061] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 431.241061] kworker/u:1/1423 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 431.241061] (&(&newtbl->hashwlock[i])->rlock){+.?...}, at: [<c14671bf>] mesh_path_add+0x167/0x257 Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Check size of a new mesh path table for changes since allocation.Javier Cardona
Not sure if I'm chasing a ghost here, seems like the mesh_path->size_order needs to be inside an RCU-read section to prevent that value from changing between table allocation and copying. We have observed crashes that might be caused by this. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Self-protected management frames are not robustThomas Pedersen
They may contain encrypted information elements (as AMPE frames do) but they are not encrypted. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: allow setting MFP flag for a meshifThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: allow installing keys for a meshifThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: Let userspace drive the peer link management states.Javier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11cfg80211: Use capability info to detect mesh beacons.Javier Cardona
Mesh beacons no longer use all-zeroes BSSID. Beacon frames for MBSS, infrastructure BSS, or IBSS are differentiated by the Capability Information field in the Beacon frame. A mesh STA sets the ESS and IBSS subfields to 0 in transmitted Beacon or Probe Response management frames. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11open80211s: Stop using zero for address 3 in mesh plink mgmt framesJavier Cardona
Previous versions of 11s draft used the all zeroes address. Current draft uses the same address as address 2. Also, use the ANA-approved action category code for peer establishment frames. Note: This breaks compatibility with previous mesh protocol instances. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Drop MESH_PLINK category and use new ANA-approved MESH_ACTIONJavier Cardona
Note: This breaks compatibility with previous mesh protocol instances. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Let userspace send action frames over mesh interfacesJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: Introduce NL80211_MESH_SETUP_USERSPACE_AMPEJavier Cardona
Introduce a new configuration option to support AMPE from userspace. Prior to this series we only supported authentication in userspace: an authentication daemon would authenticate peer candidates in userspace and hand them over to the kernel. From that point the mesh stack would take over and establish a peer link (Mesh Peering Management). These patches introduce support for Authenticated Mesh Peering Exchange in userspace. The userspace daemon implements the AMPE protocol and on successfull completion create mesh peers and install encryption keys. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11libertas: Use netdev_<level> or dev_<level> where possibleJoe Perches
Using the more descriptive logging styles gives a bit more information about the device being operated on. Makes the object trivially smaller too. $ size drivers/net/wireless/libertas/built-in.o.* 187730 2973 38488 229191 37f47 drivers/net/wireless/libertas/built-in.o.new 188195 2973 38488 229656 38118 drivers/net/wireless/libertas/built-in.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11libertas: Convert lbs_pr_<level> to pr_<level>Joe Perches
Use the standard pr_<level> functions eases grep a bit. Added a few missing terminating newlines to messages. Coalesced long formats. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ssb: update list of devices supporting multiple 80211 coresRafał Miłecki
Some of the BCM43xx chips contain cores that are attached to the SSB, but are inactive as they do not connect to the external environment. These must not be registered. Several of these types are handled in driver ssb; however, the specific case of an inactive 802.11 cores is now treated in b43 and b43legacy. Although the current setup works, this minor change will place all such workarounds in ssb, and simplify the code in drivers b43 and b43legacy. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10mwifiex: remove unnecessary struct mwifiex_opt_sleep_confirm_bufferAmitkumar Karwar
The structure definition is struct mwifiex_opt_sleep_confirm_buffer { u8 hdr[4]; struct mwifiex_opt_sleep_confirm ps_cfm_sleep; } __packed; For sleep_confirm command we already reserve 4 bytes (using skb_reserve()) for an interface header. It will be filled later by interface specific code. We don't need "hdr[4]" element in above structure. So we can use "struct mwifiex_opt_sleep_confirm" directly instead of "struct mwifiex_opt_sleep_confirm_buffer". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10bcma: add Broadcom specific AMBA bus driverRafał Miłecki
Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10mac80211: don't drop frames where skb->len < 24 in ieee80211_scan_rx()Luciano Coelho
This seems to be a leftover from the old days, when we didn't support any frames that didn't contain the full ieee802.11 header. This is not the case anymore. It does not cause problems now, because they are only dropped during scan. But when scheduled scans get merged, this would become a problem because we would drop all small frames while scheduled scan is running. To fix this, return RX_CONTINUE instead of RX_DROP_MONITOR. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: Failed to set default beacon rssi in AP/IBSS modeRajkumar Manoharan
This beacon rssi will be used to set noisefloor during ani reset. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: Fix rssi update in ad-hoc modeRajkumar Manoharan
The average beacon rssi which will be used by ani is not updated in adhoc mode. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k_hw: Change DCU backoff thresh for AR9340Rajkumar Manoharan
By changing DCU backoff threshold for AR9340 to 1, helps to reduce rx overrurns seen while running bidirectional traffic. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k_hw: Corrected xpabiaslevel register settings for AR9340Rajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10rtlwifi: rtl8192cu: Fix memset/memcpy using sizeof(ptr) not sizeof(*ptr)Joe Perches
Found via coccinelle script @@ type T; T* ptr; expression E1; @@ * memset(E1, 0, sizeof(ptr)); Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k_hw: remove get_channel_noise functionMohammed Shafi Shajakhan
currently ath9k_hw_getchan_noise is not used anywhere Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10b43: trivial: include ssb word in ssb specific functionsRafał Miłecki
This can be helpful when we decide to add support for other buses. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10mwifiex: fix null derefs, mem leaks and triviaChristoph Fritz
This patch: - adds kfree() where necessary - prevents potential null dereferences - makes use of kfree_skb() - replaces -1 for failed kzallocs with -ENOMEM Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Kiran Divekar <dkiran@marvell.com> Tested-by: Amitkumar Karwar <akarwar@marvell.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10b43legacy: drop ssb-duplicated workaround for dangling coresRafał Miłecki
Remove the code to detect inactive 802.11 cores, as that function is now done in ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10b43: drop ssb-duplicated workaround for dangling coresRafał Miłecki
Remove the code to detect inactive 802.11 cores, as that function is now done in ssb. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10rt2x00: Fix rmmod hang of rt2800pciGertjan van Wingerde
txstatus_timer should only be deleted for USB devices, as it is only initialized for USB devices. Reported-by: Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10p54pci: fix -Wunused-but-set-variable warningsChristian Lamparter
p54pci.c: In function ‘p54p_tx’: p54pci.c:334:6: warning: variable ‘device_idx’ set but not used Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10carl9170: fix -Wunused-but-set-variable warningsChristian Lamparter
tx.c: In function ‘carl9170_tx_accounting_free’: tx.c:159:28: warning: variable ‘txinfo’ set but not used tx.c: In function ‘carl9170_tx_status_process_ampdu’: tx.c:383:27: warning: variable ‘ar_info’ set but not used tx.c: In function ‘__carl9170_tx_process_status’: tx.c:626:27: warning: variable ‘arinfo’ set but not used tx.c: In function ‘carl9170_tx_ampdu_queue’: tx.c:1324:15: warning: variable ‘max’ set but not used Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10rtlwifi: rtl8192se: Remove need to disable ASPMChaoming Li
When this driver was initially submitted, the system would crash unless ASPM was disabled. This problem has been fixed. This patch also adds a printk that outputs the name of the firmware file that is used. Signed-off-by: Chaoming_Li <chaoming_li@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-12 13:26:11 +0000