summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-21ASoC: sh: fsi: Add snd_soc_dai_set_fmt supportKuninori Morimoto
This patch add snd_soc_dai_ops :: set_fmt to FSI driver and select master/slave clock mode by snd_soc_dai_set_fmt on fsi-xxx.c instead of platform infomation code. This patch remove fsi_is_master function which is no longer needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: sh: fsi: Add fsi_get_priv_frm_dai functionKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: ak4642: add SND_SOC_DAIFMT_FORMAT supportKuninori Morimoto
This patch support LEFT_J / I2S only for now Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-01-21ASoC: soc-cache: Add trace event for snd_soc_cache_sync()Dimitris Papastamos
This patch makes it easy to see when the syncing process begins and ends. You can also enable the snd_soc_reg_write tracepoint to see which registers are being synced. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: CS4271 codec supportAlexander Sverdlin
Added support for CS4271 codec to ASoC. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-21ASoC: Handle low measured DC offsets for wm_hubs devicesMark Brown
The DC servo codes are actually signed numbers so need to be treated as such. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-01-21ASoC: da8xx/omap-l1xx: match codec_name with i2c idsRajashekhara, Sudhakar
The codec_name entry for da8xx evm in sound/soc/davinci/davinci-evm.c is not matching with the i2c ids in the board file. Without this fix the soundcard does not get detected on da850/omap-l138/am18x evm. Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Tested-by: Dan Sharon <dansharon@nanometrics.ca> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org (for 2.6.37)
2011-01-21ASoC: wm8903: Expose GPIOs through gpiolibStephen Warren
Also, update platform_data GPIO handling to have an explicit "don't touch this pin" option. Add #defines for the GPIO pin functions. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-20ASoC: soc-cache: Apply the cache_bypass optionDimitris Papastamos
Incorporate the use of the cache_bypass functionality in the syncing functions. The snd_soc_flat_cache_sync() need not be hooked as there is no performance benefit from using the cache_bypass option. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-20ASoC: soc-cache: Introduce the cache_bypass optionDimitris Papastamos
This is primarily needed to avoid writing back to the cache whenever we are syncing the cache with the hardware. This gives a performance benefit especially for large register maps. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-19Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-01-19ASoC: WM8994: fix wrong value in tristate functionQiao Zhou
fix wrong value in wm8994_set_tristate func. when updating reg bits, it should use "value", not "reg". Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-19ASoC: WM8995: Fix incorrect use of snd_soc_update_bits()Dimitris Papastamos
In the wm8995_set_tristate() function when updating the register bits use the value and not the register index as the value argument. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-19ASoC: Provide per widget type callback when executing DAPM sequencesMark Brown
Many modern devices have features such as DC servos which take time to start. Currently these are handled by per-widget events but this makes it difficult to paralleise operations on multiple widgets, meaning delays can end up being needlessly serialised. By providing a callback to drivers when all widgets of a given type have been handled during a DAPM sequence the core allows drivers to start operations separately and wait for them to complete much more simply. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-19ASoC: Add support for sequencing withinMark Brown
With larger devices there may be many widgets of the same type in series in an audio path. Allow drivers to specify an additional level of ordering within each widget type by adding a subsequence number to widgets and then splitting operations on widgets so that widgets of the same type but different sequence numbers are processed separately. A typical example would be a supply widget which requires that another widget be enabled to provide power or clocking. SND_SOC_DAPM_PGA_S() and SND_SOC_DAPM_SUPPLY_S() macros are provided allowing this to be used with PGAs and supplies as these are the most commonly affected widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-19ASoC: Explicitly say if we're powering up or downMark Brown
Rather than passing the sequence to use for DAPM widgets around by reference explicitly say if we're powering up or down until the point where we need the sequence itself. This should make no practical difference in itself but supports future refactoring. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-19ASoC: sst_platform porting sst dsp driver interface as per latest in Greg's ↵Harsha Priya
staging tree The interface between sst platform driver and intel sst dsp driver have been changed in Greg's staging tree - next branch This patch adds the interface changes compatible with the new interface in Greg's staging tree Signed-off-by: Harsha Priya <priya.harsha@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-19Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-01-19Merge branch 'for-2.6.38' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.38
2011-01-18Linux 2.6.38-rc1Linus Torvalds
2011-01-18Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm93) Add support for LM94
2011-01-18Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Validate cpu early in perf_event_alloc() perf: Find_get_context: fix the per-cpu-counter check perf: Fix contexted inheritance
2011-01-18Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Clear irqstack thread_info x86: Make relocatable kernel work with new binutils
2011-01-18Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ...
2011-01-18hwmon: (lm93) Add support for LM94Guenter Roeck
This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-18Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-01-18ASoC: Add dependency on INTEL_SCU_IPC for Intel MID driversVinod Koul
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Harsha Priya <priya.harsha@intel.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18ASoC: core: Remove dapm_sync call from soc_post_component_initPeter Ujfalusi
snd_soc_dapm_new_widgets will call dapm_power_widgets at the end, so there is no need to call snd_soc_dapm_sync after snd_soc_dapm_new_widgets. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Reviewed-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18ASoC: PXA: Fix codec address on Zipit Z2Vasily Khoruzhick
WM8750 address is 0x1b, not 0x1a. Without this fix ALSA detects no sound cards on Zipit Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18ASoC: PXA: Fix jack detection on Zipit Z2Vasily Khoruzhick
Fix jack detection on Zipit Z2, otherwise it disables headphones output when jack is connected Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18ASoC: Blackfin: fix DAI/SPORT config dependency issuesBarry Song
While I2S/TDM/AC97 DAI is built-in, others are compiled as modules, SND_BF5XX_SOC_SPORT will be module, then DAI can't get some symbols. Except that, SND_BF5XX_AC97 depends on SND_BF5XX_SOC_AC97 too. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18ASoC: Blackfin TDM: use external frame syncsBarry Song
We don't want to use internal frame syncs otherwise we sometimes get out of sync, so don't enable them when setting up the SPORT. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18ASoC: Blackfin AC97: fix build error after multi-component updateMike Frysinger
We need to tweak how we query the active capture/playback state after the recent overhauls of common code. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-18ASoC: Blackfin TDM: fix missed snd_soc_dai_get_drvdata updateMike Frysinger
One spot was missed in this driver when converting from snd_soc_dai.private_data to snd_soc_dai_get_drvdata. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-01-18ASoC: documentation updatesSeungwhan Youn
This patch is only for RFC purpose of ASoC documentation updates which match with current ASoC codes with documents. Mostly modify features are modified to be sync with changes after multi-component patches. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-18perf: Validate cpu early in perf_event_alloc()Oleg Nesterov
Starting from perf_event_alloc()->perf_init_event(), the kernel assumes that event->cpu is either -1 or the valid CPU number. Change perf_event_alloc() to validate this argument early. This also means we can remove the similar check in find_get_context(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161032.GC693@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18perf: Find_get_context: fix the per-cpu-counter checkOleg Nesterov
If task == NULL, find_get_context() should always check that cpu is correct. Afaics, the bug was introduced by 38a81da2 "perf events: Clean up pid passing", but even before that commit "&& cpu != -1" was not exactly right, -ESRCH from find_task_by_vpid() is not accurate. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161008.GB693@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-18MIPS: Malta: enable Cirrus FB consoleAurelien Jarno
While most users of a physical Malta board are using the serial port as the console, a lot of QEMU users would prefer to interact with a graphical console. Enable the Cirrus FB support in the Malta default configuration to make that possible. Note that the default console will still be the serial port, users have to pass "console=tty0" to the kernel to use the Cirrus FB. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2001/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: add CONFIG_VIRTUALIZATION for virtio supportAurelien Jarno
Add CONFIG_VIRTUALIZATION to the MIPS architecture and include the the virtio code there. Used to enable the virtio drivers under QEMU. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2002/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: Implement __read_mostlyDavid Daney
Just do what everyone else is doing by placing __read_mostly things in the .data.read_mostly section. mips_io_port_base can not be read-only (const) and writable (__read_mostly) at the same time. One of them has to go, so I chose to eliminate the __read_mostly. It will still get stuck in a portion of memory that is not adjacent to things that are written, and thus not be on a dirty cache line, for whatever that is worth. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1702/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common WMAC device for AR913X based boardsGabor Juhos
Add common platform_device and helper code to make the registration of the built-in wireless MAC easier on the Atheros AR9130/AR9132 based boards. Also register the WMAC device on the AR81 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org>, Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1962/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: Add initial support for the Atheros AP81 reference boardGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1952/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common SPI controller deviceGabor Juhos
Several boards are using the built-in SPI controller of the AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device and helper code to register it. Additionally, the patch registers the SPI bus on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1956/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCsGabor Juhos
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: spi-devel-general@lists.sourceforge.net Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1960/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common GPIO buttons deviceGabor Juhos
Almost all boards have one or more push buttons connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the buttons on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1954/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common watchdog deviceGabor Juhos
All supported SoCs have a built-in hardware watchdog driver. This patch registers a platform_device for that to make it usable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1955/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add common GPIO LEDs deviceGabor Juhos
Almost all boards have one or more LEDs connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the LEDs on the PB44 board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1953/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: add initial support for the Atheros PB44 reference boardGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1950/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18MIPS: ath79: utilize the MIPS multi-machine supportGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1949/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 21:56:55 +0000