summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-01inetpeer: fix RCU lookup()Eric Dumazet
Excess of seafood or something happened while I cooked the commit adding RB tree to inetpeer. Of course, RCU rules need to be respected or bad things can happen. In this particular loop, we need to read *pp once per iteration, not twice. Fixes: b145425f269a ("inetpeer: remove AVL implementation in favor of RB tree") Reported-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01selftests: correct define in msg_zerocopy.cWillem de Bruijn
The msg_zerocopy test defines SO_ZEROCOPY if necessary, but its value is inconsistent with the one in asm-generic.h. Correct that. Also convert one error to a warning. When the test is complete, report throughput and close cleanly even if the process did not wait for all completions. Reported-by: Dan Melnic <dmm@fb.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01doc: document MSG_ZEROCOPYWillem de Bruijn
Documentation for this feature was missing from the patchset. Copied a lot from the netdev 2.1 paper, addressing some small interface changes since then. Changes v1 -> v2 - change email discussion URL format - clarify that u32 counter is per-syscall, unsigned and wraps after UINT_MAX calls - describe errno on send failure specific to MSG_ZEROCOPY - a few very minor rewordings Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01bpf: Collapse offset checks in sock_filter_is_valid_accessDavid Ahern
Make sock_filter_is_valid_access consistent with other is_valid_access helpers. Requested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01mvneta: Driver and hardware supports IPv6 offload, so enable itAndrew Pilloud
The mvneta driver and hardware supports IPv6 offload, however it isn't enabled. Set the NETIF_F_IPV6_CSUM feature to inform the network layer that this driver can offload IPV6 TCP and UDP checksums. This change has been tested on an Armada 370 and the feature support confirmed with several device datasheets including the Armada XP and Armada 3700. Signed-off-by: Andrew Pilloud <andrewpilloud@igneoussystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge tag 'wireless-drivers-next-for-davem-2017-09-01' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.14 Few last patches for 4.14, nothing really major here. Major changes: wil6210 * support FW RSSI reporting (by mistake this was accidentally mentioned already in the previous pull request, but now it's really included) * make debugfs optional, adds new Kconfig option CONFIG_WIL6210_DEBUGFS qtnfmac * implement 64-bit DMA support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01qlcnic: remove redundant zero check on retries counterColin Ian King
At the end of the do while loop the integer counter retries will always be zero and so the subsequent check to see if it is zero is always true and therefore redundant. Remove the redundant check and always return -EIO on this return path. Also unbreak the literal string in dev_err message to clean up a checkpatch warning. Detected by CoverityScan, CID#744279 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge branch 'mdio-mux-Misc-fix'David S. Miller
Corentin Labbe says: ==================== net: mdio-mux: Misc fix This patch series fix minor problems found when working on the dwmac-sun8i syscon mdio-mux. Changes since v1: - Removed obsolete comment about of_mdio_find_bus/put_device - removed more DRV_VERSION ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01net: mdio-mux: fix unbalanced put_deviceCorentin Labbe
mdio_mux_uninit() call put_device (unconditionally) because of of_mdio_find_bus() in mdio_mux_init. But of_mdio_find_bus is only called if mux_bus is empty. If mux_bus is set, mdio_mux_uninit will print a "refcount_t: underflow" trace. This patch add a get_device in the other branch of "if (mux_bus)". Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01net: mdio-mux-mmioreg: Can handle 8/16/32 bits registersCorentin Labbe
This patch fix an old information that mdio-mux-mmioreg can only handle 8bit registers. This is not true anymore. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01net: mdio-mux: printing driver version is uselessCorentin Labbe
Remove the driver version information because this information is not useful in an upstream kernel driver. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01net: mdio-mux: Remove unnecessary 'out of memory' messageCorentin Labbe
This patch fix checkpatch warning about unnecessary 'out of memory' message. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01net: mdio-mux: Fix NULL Comparison styleCorentin Labbe
This patch fix checkpatch warning about NULL Comparison style. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge branch 'mvpp2-optional-PHYs-and-GoP-link-irq'David S. Miller
Antoine Tenart says: ==================== net: mvpp2: optional PHYs and GoP link irq This series aims at making the driver work when no PHY is connected between a port and the physical layer and not described as a fixed-phy. This is useful for some usecases such as when a switch is connected directly to the serdes lanes. It can also be used for SFP ports on the 7k-db and 8k-db while waiting for the phylink support to land in (which should be part of another series). This series makes the phy optional in the PPv2 driver, and then adds the support for the GoP port link interrupt to handle link status changes on such ports. This was tested using the SFP ports on the 7k-db and 8k-db boards. Since v1: - Now use phy_interface_mode_is_rgmii() in the GoP link patch. - Added one cosmetic patch to take advantage of phy_interface_mode_is_rgmii() in the whole PPv2 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Documentation/bindings: net: marvell-pp2: add the link interruptAntoine Tenart
A link interrupt can be described. Document this valid interrupt name. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01net: mvpp2: use the GoP interrupt for link status changesAntoine Tenart
This patch adds the GoP link interrupt support for when a port isn't connected to a PHY. Because of this the phylib callback is never called and the link status management isn't done. This patch use the GoP link interrupt in such cases to still have a minimal link management. Without this patch ports not connected to a PHY cannot work. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01net: mvpp2: make the phy optionalAntoine Tenart
There is not necessarily a PHY between the GoP and the physical port. However, the driver currently makes the "phy" property mandatory, contrary to what is stated in the device tree bindings. This patch makes the PHY optional, and aligns the PPv2 driver on its device tree documentation. However if a PHY is provided, the GoP link interrupt won't be used. With this patch switches directly connected to the serdes lanes and SFP ports on the Armada 8040-db and Armada 7040-db can be used if the link interrupt is described in the device tree. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01net: mvpp2: take advantage of the is_rgmii helperAntoine Tenart
Convert all RGMII checks to use the phy_interface_mode_is_rgmii() helper. This is a cosmetic patch. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge branch 'mlxsw-next-fixes'David S. Miller
Jiri Pirko says: ==================== mlxsw: spectrum_router: Couple of fixes Ido Schimmel (2): mlxsw: spectrum_router: Trap packets hitting anycast routes mlxsw: spectrum_router: Set abort trap in all virtual routers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01mlxsw: spectrum_router: Set abort trap in all virtual routersIdo Schimmel
When the abort mechanism is invoked a default route directing packets to the CPU is programmed in all the virtual routers currently in use. This can result in packet loss in case a new VRF is configured. Upon abort, program the default route in all virtual routers, whether they are in use or not. The patch is directed at net-next since post-abort fixes aren't critical and packet loss due to a missing default route will be insignificant compared to packet loss caused by the CPU port policer. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01mlxsw: spectrum_router: Trap packets hitting anycast routesIdo Schimmel
I relied on the fact that anycast routes use the loopback device as their nexthop device to trap packets hitting them to the CPU. After commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") this is no longer the case and such routes are programmed with a forward action (note the 'offload' flag): anycast cafe:: dev enp3s0np7 proto kernel metric 0 offload pref medium This will prevent the router from locally receiving packets destined to the Subnet-Router anycast address. Fix this by specifically programming anycast routes with action trap, which results in the following output: anycast cafe:: dev enp3s0np7 proto kernel metric 0 pref medium Fixes: 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge branch 'bpf-Improve-LRU-map-lookup-performance'David S. Miller
Martin KaFai Lau says: ==================== bpf: Improve LRU map lookup performance This patchset improves the lookup performance of the LRU map. Please see individual patch for details. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01bpf: Only set node->ref = 1 if it has not been setMartin KaFai Lau
This patch writes 'node->ref = 1' only if node->ref is 0. The number of lookups/s for a ~1M entries LRU map increased by ~30% (260097 to 343313). Other writes on 'node->ref = 0' is not changed. In those cases, the same cache line has to be changed anyway. First column: Size of the LRU hash Second column: Number of lookups/s Before: > echo "$((2**20+1)): $(./map_perf_test 1024 1 $((2**20+1)) 10000000 | awk '{print $3}')" 1048577: 260097 After: > echo "$((2**20+1)): $(./map_perf_test 1024 1 $((2**20+1)) 10000000 | awk '{print $3}')" 1048577: 343313 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01bpf: Inline LRU map lookupMartin KaFai Lau
Inline the lru map lookup to save the cost in making calls to bpf_map_lookup_elem() and htab_lru_map_lookup_elem(). Different LRU hash size is tested. The benefit diminishes when the cache miss starts to dominate in the bigger LRU hash. Considering the change is simple, it is still worth to optimize. First column: Size of the LRU hash Second column: Number of lookups/s Before: > for i in $(seq 9 20); do echo "$((2**i+1)): $(./map_perf_test 1024 1 $((2**i+1)) 10000000 | awk '{print $3}')"; done 513: 1132020 1025: 1056826 2049: 1007024 4097: 853298 8193: 742723 16385: 712600 32769: 688142 65537: 677028 131073: 619437 262145: 498770 524289: 316695 1048577: 260038 After: > for i in $(seq 9 20); do echo "$((2**i+1)): $(./map_perf_test 1024 1 $((2**i+1)) 10000000 | awk '{print $3}')"; done 513: 1221851 1025: 1144695 2049: 1049902 4097: 884460 8193: 773731 16385: 729673 32769: 721989 65537: 715530 131073: 671665 262145: 516987 524289: 321125 1048577: 260048 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01bpf: Add lru_hash_lookup performance testMartin KaFai Lau
Create a new case to test the LRU lookup performance. At the beginning, the LRU map is fully loaded (i.e. the number of keys is equal to map->max_entries). The lookup is done through key 0 to num_map_entries and then repeats from 0 again. This patch also creates an anonymous struct to properly name the test params in stress_lru_hmap_alloc() in map_perf_test_kern.c. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-09-01 This should be the last ipsec-next pull request for this release cycle: 1) Support netdevice ESP trailer removal when decryption is offloaded. From Yossi Kuperman. 2) Fix overwritten return value of copy_sec_ctx(). Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge branch 'bpf-Add-option-to-set-mark-and-priority-in-cgroup-sock-programs'David S. Miller
David Ahern says: ==================== bpf: Add option to set mark and priority in cgroup sock programs Add option to set mark and priority in addition to bound device for newly created sockets. Also, allow the bpf programs to use the get_current_uid_gid helper meaning socket marks, priority and device can be set based on the uid/gid of the running process. Sample programs are updated to demonstrate the new options. v3 - no changes to Patches 1 and 2 which Alexei acked in previous versions - dropped change related to recursive programs in a cgroup - updated tests per dropped patch v2 - added flag to control recursive behavior as requested by Alexei - added comment to sock_filter_func_proto regarding use of get_current_uid_gid helper - updated test programs for recursive option ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01samples/bpf: Update cgroup socket examples to use uid gid helperDavid Ahern
Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01samples/bpf: Update cgrp2 socket testsDavid Ahern
Update cgrp2 bpf sock tests to check that device, mark and priority can all be set on a socket via bpf programs attached to a cgroup. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01samples/bpf: Add option to dump socket settingsDavid Ahern
Add option to dump socket settings. Will be used in the next patch to verify bpf programs are correctly setting mark, priority and device based on the cgroup attachment for the program run. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01samples/bpf: Add detach option to test_cgrp2_sockDavid Ahern
Add option to detach programs from a cgroup. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01samples/bpf: Update sock test to allow setting mark and priorityDavid Ahern
Update sock test to set mark and priority on socket create. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01bpf: Allow cgroup sock filters to use get_current_uid_gid helperDavid Ahern
Allow BPF programs run on sock create to use the get_current_uid_gid helper. IPv4 and IPv6 sockets are created in a process context so there is always a valid uid/gid Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01bpf: Add mark and priority to sock options that can be setDavid Ahern
Add socket mark and priority to fields that can be set by ebpf program when a socket is created. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31Merge branch 'mlxsw-Add-IPv6-host-dpipe-table'David S. Miller
Jiri Pirko says: ==================== mlxsw: Add IPv6 host dpipe table This patchset adds IPv6 host dpipe table support. This will provide the ability to observe the hardware offloaded IPv6 neighbors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_dpipe: Add support for controlling IPv6 neighbor countersArkadi Sharshevsky
Add support for controlling IPv6 neighbor counters via dpipe. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_router: Add support for setting counters on IPv6 neighborsArkadi Sharshevsky
Add support for setting counters on IPv6 neighbors based on dpipe's host6 table counter status. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_dpipe: Add support for IPv6 host table dumpArkadi Sharshevsky
Add support for IPv6 host table dump. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_dpipe: Make host entry fill handler more genericArkadi Sharshevsky
Change the host entry filler helper to be applicable for both IPv4/6 addresses. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_router: Add IPv6 neighbor access helperArkadi Sharshevsky
Add helper for accessing destination IP in case of IPv6 neighbor. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_dpipe: Add IPv6 host table initial supportArkadi Sharshevsky
Add IPv6 host table initial support. The action behavior for both IPv4/6 tables is the same, thus the same action dump op is used. Neighbors with link local address are ignored. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31mlxsw: spectrum_router: Export IPv6 link local address check helperArkadi Sharshevsky
Neighbors with link local addresses are not offloaded to the host table, yet, the are maintained in the driver for adjacency table usage. When dumping the IPv6 host neighbors this link local neighbors should be ignored. This patch exports this helper for dpipe usage. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31devlink: Add IPv6 header for dpipeArkadi Sharshevsky
This will be used by the IPv6 host table which will be introduced in the following patches. The fields in the header are added per-use. This header is global and can be reused by many drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31x86: bpf_jit: small optimization in emit_bpf_tail_call()Eric Dumazet
Saves 4 bytes replacing following instructions : lea rax, [rsi + rdx * 8 + offsetof(...)] mov rax, qword ptr [rax] cmp rax, 0 by : mov rax, [rsi + rdx * 8 + offsetof(...)] test rax, rax Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31samples/bpf: Fix compilation issue in redirect dummy programTariq Toukan
Fix compilation error below: $ make samples/bpf/ LLVM ERROR: 'xdp_redirect_dummy' label emitted multiple times to assembly file make[1]: *** [samples/bpf/xdp_redirect_kern.o] Error 1 make: *** [samples/bpf/] Error 2 Fixes: 306da4e685b4 ("samples/bpf: xdp_redirect load XDP dummy prog on TX device") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31net: fix two typos in net_device_ops documentation.Rami Rosen
This patch fixes two trivial typos in net_device_ops documentation, related to ndo_xdp_flush callback. Signed-off-by: Rami Rosen <rami.rosen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()Andrii
Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv() in net/dccp/ipv6.c, similar to the handling in net/ipv6/tcp_ipv6.c Signed-off-by: Andrii Vladyka <tulup@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31bridge: add tracepoint in br_fdb_updateRoopa Prabhu
This extends bridge fdb table tracepoints to also cover learned fdb entries in the br_fdb_update path. Note that unlike other tracepoints I have moved this to when the fdb is modified because this is in the datapath and can generate a lot of noise in the trace output. br_fdb_update is also called from added_by_user context in the NTF_USE case which is already traced ..hence the !added_by_user check. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31net_sched: add reverse binding for tc classCong Wang
TC filters when used as classifiers are bound to TC classes. However, there is a hidden difference when adding them in different orders: 1. If we add tc classes before its filters, everything is fine. Logically, the classes exist before we specify their ID's in filters, it is easy to bind them together, just as in the current code base. 2. If we add tc filters before the tc classes they bind, we have to do dynamic lookup in fast path. What's worse, this happens all the time not just once, because on fast path tcf_result is passed on stack, there is no way to propagate back to the one in tc filters. This hidden difference hurts performance silently if we have many tc classes in hierarchy. This patch intends to close this gap by doing the reverse binding when we create a new class, in this case we can actually search all the filters in its parent, match and fixup by classid. And because tcf_result is specific to each type of tc filter, we have to introduce a new ops for each filter to tell how to bind the class. Note, we still can NOT totally get rid of those class lookup in ->enqueue() because cgroup and flow filters have no way to determine the classid at setup time, they still have to go through dynamic lookup. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.14. Major changes: wil6210 * support FW RSSI reporting (by mistake this was accidentally mentioned already in the previous pull request, but now it's really included) * make debugfs optional, adds new Kconfig option CONFIG_WIL6210_DEBUGFS
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 08:35:14 +0000