summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-01x86/asm/entry/32: Use smaller PUSH instructions instead of MOV, to build ↵Denys Vlasenko
'pt_regs' on stack This mimics the recent similar 64-bit change. Saves ~110 bytes of code. Patch was run-tested on 32 and 64 bits, Intel and AMD CPU. I also looked at the diff of entry_64.o disassembly, to have a different view of the changes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427821211-25099-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01x86/asm/entry/64: Do not TRACE_IRQS fast SYSRET64 pathDenys Vlasenko
SYSRET code path has a small irq-off block. On this code path, TRACE_IRQS_ON can't be called right before interrupts are enabled for real, we can't clobber registers there. So current code does it earlier, in a safe place. But with this, TRACE_IRQS_OFF/ON frames just two fast instructions, which is ridiculous: now most of irq-off block is _outside_ of the framing. Do the same thing that we do on SYSCALL entry: do not track this irq-off block, it is very small to ever cause noticeable irq latency. Be careful: make sure that "jnz int_ret_from_sys_call_irqs_off" now does invoke TRACE_IRQS_OFF - move int_ret_from_sys_call_irqs_off label before TRACE_IRQS_OFF. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427821211-25099-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31x86/asm/entry: Remove user_mode_ignore_vm86()Ingo Molnar
user_mode_ignore_vm86() can be used instead of user_mode(), in places where we have already done a v8086_mode() security check of ptregs. But doing this check in the wrong place would be a bug that could result in security problems, and also the naming still isn't very clear. Furthermore, it only affects 32-bit kernels, while most development happens on 64-bit kernels. If we replace them with user_mode() checks then the cost is only a very minor increase in various slowpaths: text data bss dec hex filename 10573391 703562 1753042 13029995 c6d26b vmlinux.o.before 10573423 703562 1753042 13030027 c6d28b vmlinux.o.after So lets get rid of this distinction once and for all. Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150329090233.GA1963@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31x86/asm/entry/64: Do not GET_THREAD_INFO() too earlyDenys Vlasenko
At exit_intr, we GET_THREAD_INFO(%rcx) and then jump to retint_kernel if saved CS was from kernel. But the code at retint_kernel doesn't need %rcx. Move GET_THREAD_INFO(%rcx) down, after CS check and branch. While at it, remove "has a correct top of stack" comment. After recent changes which eliminated FIXUP_TOP_OF_STACK, we always have a correct pt_regs layout. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427738975-7391-5-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31x86/asm/entry/64: Move retint_kernel code block closer to its userDenys Vlasenko
The "retint_kernel" code block is misplaced. Since its logical continuation is "retint_restore_args", it is more natural to place it above that label. This also makes two jumps "short". This change only moves code block around, without changing logic. This enables the next simplification: making "retint_restore_args" label a local numeric one. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427738975-7391-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27x86/asm/entry/32: Make register zero-extension more prominentDenys Vlasenko
There are a couple of syscall argument zero-extension instructions in the 32-bit compat entry code, and it was mentioned that people keep trying to optimize them out, introducing bugs. Make them more visible, and add a "do not remove" comment. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427452582-21624-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27x86/asm/entry/32: Update "interrupt off" commentsDenys Vlasenko
The existing comment has proven to be not very clear. Replace it with a comment similar to the one we now have in the 64-bit syscall entry point. (Three instances, one per 32-bit syscall entry). In the INT80 entry point's CFI annotations, replace mysterious expressions with numric constants. In this case, raw numbers look more understandable. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427452582-21624-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27x86/asm/entry/64: Add missing CFI annotationDenys Vlasenko
This is a missing bit of the recent MOV-to-PUSH conversion. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427452582-21624-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27x86/asm/entry/64: Fix comment about SYSENTER MSRsDenys Vlasenko
The comment is ancient, it dates to the time when only AMD's x86_64 implementation existed. AMD wasn't (and still isn't) supporting SYSENTER, so these writes were "just in case" back then. This has changed: Intel's x86_64 appeared, and Intel does support SYSENTER in long mode. "Some future 64-bit CPU" is here already. The code may appear "buggy" for AMD as it stands, since MSR_IA32_SYSENTER_EIP is only 32-bit for AMD CPUs. Writing a kernel function's address to it would drop high bits. Subsequent use of this MSR for branch via SYSENTER seem to allow user to transition to CPL0 while executing his code. Scary, eh? Explain why that is not a bug: because SYSENTER insn would not work on AMD CPU. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427453956-21931-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27x86/irq/tracing: Do not save callee-preserved registers around ↵Denys Vlasenko
lockdep_sys_exit_thunk Internally, lockdep_sys_exit_thunk saves callee-clobbered registers, and calls a C function, lockdep_sys_exit. Thus, callee-preserved registers won't be mangled, there is no need to save them. Patch was run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427314468-12763-4-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27x86/irq/tracing: Fold ARCH_LOCKDEP_SYS_EXIT defines into their usersDenys Vlasenko
There is no need to have an extra level of macro indirection here. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427314468-12763-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27x86/irq/tracing: Move ARCH_LOCKDEP_SYS_EXIT defines closer to their usersDenys Vlasenko
This change simply moves defines around (even if it's not obvious in a patch form). Nothing is changed. This is a preparation for folding ARCH_LOCKDEP_SYS_EXIT defines into their users. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427314468-12763-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27x86/asm/entry/64: Use smaller instructionsDenys Vlasenko
The $AUDIT_ARCH_X86_64 parameter to syscall_trace_enter_phase1/2 is a 32-bit constant, loading it with 32-bit MOV produces 5-byte insn instead of 10-byte MOVABS one. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427303896-24023-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27x86/asm/entry/64: Use better label name, fix commentsDenys Vlasenko
A named label "ret_from_sys_call" implies that there are jumps to this location from elsewhere, as happens with many other labels in this file. But this label is used only by the JMP a few insns above. To make that obvious, use local numeric label instead. Improve comments: "and return regs->ax" isn't too informative. We always return regs->ax. The comment suggesting that it'd be cool to use rip relative addressing for CALL is deleted. It's unclear why that would be an improvement - we aren't striving to use position-independent code here. PIC code here would require something like LEA sys_call_table(%rip),reg + CALL *(reg,%rax*8)... "iret frame is also incomplete" is no longer true, fix that too. Also fix typo in comment. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427303896-24023-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-25Merge branch 'x86/urgent' into x86/asm, to resolve conflictIngo Molnar
Conflicts: arch/x86/kernel/entry_64.S Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm: Further improve segment.h readabilityIngo Molnar
- extend/clarify explanations where necessary - move comments from macro values to before the macro, to make them more consistent, and to reduce preprocessor overhead - sort GDT index and selector values likewise by number - use consistent, modern kernel coding style across the file - capitalize consistently - use consistent vertical spacing - remove the unused get_limit() method (noticed by Andy Lutomirski) No change in code (verified with objdump -d): 64-bit defconfig+kvmconfig: 815a129bc1f80de6445c1d8ca5b97cad vmlinux.o.before.asm 815a129bc1f80de6445c1d8ca5b97cad vmlinux.o.after.asm 32-bit defconfig+kvmconfig: e659ef045159ddf41a0771b33a34aae5 vmlinux.o.before.asm e659ef045159ddf41a0771b33a34aae5 vmlinux.o.after.asm Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry: Check for syscall exit work with IRQs disabledAndy Lutomirski
We currently have a race: if we're preempted during syscall exit, we can fail to process syscall return work that is queued up while we're preempted in ret_from_sys_call after checking ti.flags. Fix it by disabling interrupts before checking ti.flags. Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com> Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tejun Heo <tj@kernel.org> Fixes: 96b6352c1271 ("x86_64, entry: Remove the syscall exit audit") Link: http://lkml.kernel.org/r/189320d42b4d671df78c10555976bb10af1ffc75.1427137498.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry/64: Rename THREAD_INFO() to ASM_THREAD_INFO()Ingo Molnar
The THREAD_INFO() macro has a somewhat confusingly generic name, defined in a generic .h C header file. It also does not make it clear that it constructs a memory operand for use in assembly code. Rename it to ASM_THREAD_INFO() to make it all glaringly obvious on first glance. Acked-by: Borislav Petkov <bp@suse.de> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/20150324184442.GC14760@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry/64: Merge the field offset into the THREAD_INFO() macroIngo Molnar
Before: TI_sysenter_return+THREAD_INFO(%rsp,3*8),%r10d After: movl THREAD_INFO(TI_sysenter_return, %rsp, 3*8), %r10d to turn it into a clear thread_info accessor. No code changed: md5: fb4cb2b3ce05d89940ca304efc8ff183 ia32entry.o.before.asm fb4cb2b3ce05d89940ca304efc8ff183 ia32entry.o.after.asm e39f2958a5d1300158e276e4f7663263 entry_64.o.before.asm e39f2958a5d1300158e276e4f7663263 entry_64.o.after.asm Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/20150324184411.GB14760@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry/64: Improve the THREAD_INFO() macro explanationIngo Molnar
Explain the background, and add a real example. Acked-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Borislav Petkov <bp@suse.de> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/20150324184311.GA14760@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry/64: Always set up SYSENTER MSRsIngo Molnar
On CONFIG_IA32_EMULATION=y kernels we set up MSR_IA32_SYSENTER_CS/ESP/EIP, but on !CONFIG_IA32_EMULATION kernels we leave them unchanged. Clear them to make sure the instruction is disabled properly. SYSCALL is set up properly in both cases. Acked-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm: Deobfuscate segment.hDenys Vlasenko
This file just defines a number of constants, and a few macros and inline functions. It is particularly badly written. For example, it is not trivial to see how descriptors are numbered (you'd expect that should be easy, right?). This change deobfuscates it via the following changes: Group all GDT_ENTRY_foo together (move intervening stuff away). Number them explicitly: use a number, not PREV_DEFINE+1, +2, +3: I want to immediately see that GDT_ENTRY_PNPBIOS_CS32 is 18. Seeing (GDT_ENTRY_KERNEL_BASE+6) instead is not useful. The above change allows to remove GDT_ENTRY_KERNEL_BASE and GDT_ENTRY_PNPBIOS_BASE, which weren't used anywhere else. After a group of GDT_ENTRY_foo, define all selector values. Remove or improve some comments. In particular: Comment deleted as stating the obvious: /* * The GDT has 32 entries */ #define GDT_ENTRIES 32 "The segment offset needs to contain a RPL. Grr. -AK" changed to "Selectors need to also have a correct RPL (+3 thingy)" "GDT layout to get 64bit syscall right (sysret hardcodes gdt offsets)" expanded into a description *how exactly* sysret hardcodes them. Patch was tested to compile and not change vmlinux.o on 32-bit and 64-bit builds (verified with objdump). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry/64: Get rid of int_ret_from_sys_call_fixupDenys Vlasenko
With the FIXUP_TOP_OF_STACK macro removed, this intermediate jump is unnecessary. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1426785469-15125-5-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry/64: Get rid of the FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK macrosDenys Vlasenko
The FIXUP_TOP_OF_STACK macro is only necessary because we don't save %r11 to pt_regs->r11 on SYSCALL64 fast path, but we want ptrace to see it populated. Bite the bullet, add a single additional PUSH instruction, and remove the FIXUP_TOP_OF_STACK macro. The RESTORE_TOP_OF_STACK macro is already a nop. Remove it too. On SandyBridge CPU, it does not get slower: measured 54.22 ns per getpid syscall before and after last two changes on defconfig kernel. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1426785469-15125-4-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry/64: Use PUSH instructions to build pt_regs on stackDenys Vlasenko
With this change, on SYSCALL64 code path we are now populating pt_regs->cs, pt_regs->ss and pt_regs->rcx unconditionally and therefore don't need to do that in FIXUP_TOP_OF_STACK. We lose a number of large instructions there: text data bss dec hex filename 13298 0 0 13298 33f2 entry_64_before.o 12978 0 0 12978 32b2 entry_64.o What's more important, we convert two "MOVQ $imm,off(%rsp)" to "PUSH $imm" (the ones which fill pt_regs->cs,ss). Before this patch, placing them on fast path was slowing it down by two cycles: this form of MOV is very large, 12 bytes, and this probably reduces decode bandwidth to one instruction per cycle when CPU sees them. Therefore they were living in FIXUP_TOP_OF_STACK instead (away from fast path). "PUSH $imm" is a small 2-byte instruction. Moving it to fast path does not slow it down in my measurements. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1426785469-15125-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry: Get rid of KERNEL_STACK_OFFSETDenys Vlasenko
PER_CPU_VAR(kernel_stack) was set up in a way where it points five stack slots below the top of stack. Presumably, it was done to avoid one "sub $5*8,%rsp" in syscall/sysenter code paths, where iret frame needs to be created by hand. Ironically, none of them benefits from this optimization, since all of them need to allocate additional data on stack (struct pt_regs), so they still have to perform subtraction. This patch eliminates KERNEL_STACK_OFFSET. PER_CPU_VAR(kernel_stack) now points directly to top of stack. pt_regs allocations are adjusted to allocate iret frame as well. Hopefully we can merge it later with 32-bit specific PER_CPU_VAR(cpu_current_top_of_stack) variable... Net result in generated code is that constants in several insns are changed. This change is necessary for changing struct pt_regs creation in SYSCALL64 code path from MOV to PUSH instructions. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1426785469-15125-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry/64: Change the THREAD_INFO() definition to not depend on ↵Denys Vlasenko
KERNEL_STACK_OFFSET This changes the THREAD_INFO() definition and all its callsites so that they do not count stack position from (top of stack - KERNEL_STACK_OFFSET), but from top of stack. Semi-mysterious expressions THREAD_INFO(%rsp,RIP) - "why RIP??" are now replaced by more logical THREAD_INFO(%rsp,SIZEOF_PTREGS) - "calculate thread_info's address using information that rsp is SIZEOF_PTREGS bytes below top of stack". While at it, replace "(off)-THREAD_SIZE(reg)" with equivalent "((off)-THREAD_SIZE)(reg)". The form without parentheses falsely looks like we invoke THREAD_SIZE() macro. Improve comment atop THREAD_INFO macro definition. This patch does not change generated code (verified by objdump). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1426785469-15125-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-24x86/asm/entry/64: Fold syscall32_cpu_init() into its sole userDenys Vlasenko
Having syscall32/sysenter32 initialization in a separate tiny function, called from within a function that is already syscall init specific, serves no real purpose. Its existense also caused an unintended effect of having wrmsrl(MSR_CSTAR) performed twice: once we set it to a dummy function returning -ENOSYS, and immediately after (if CONFIG_IA32_EMULATION), we set it to point to the proper syscall32 entry point, ia32_cstar_target. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/asm/entry/64: Fix incorrect commentDenys Vlasenko
The recent old_rsp -> rsp_scratch rename also changed this comment, but in this case "old_rsp" was not referring to PER_CPU(old_rsp). Fix this. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1427115839-6397-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/asm/entry: Replace some open-coded VM86 checks with v8086_mode() checksAndy Lutomirski
This allows us to remove some unnecessary ifdefs. There should be no change to the generated code. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f7e00f0d668e253abf0bd8bf36491ac47bd761ff.1426728647.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/asm/entry: Remove user_mode_vm()Andy Lutomirski
It has no callers anymore. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/a594afd6a0bddb1311bd7c92a15201c87fbb8681.1426728647.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/asm/entry: Change all 'user_mode_vm()' calls to 'user_mode()'Andy Lutomirski
user_mode_vm() and user_mode() are now the same. Change all callers of user_mode_vm() to user_mode(). The next patch will remove the definition of user_mode_vm. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/43b1f57f3df70df5a08b0925897c660725015554.1426728647.git.luto@kernel.org [ Merged to a more recent kernel. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/asm/entry: Make user_mode() work correctly if regs came from VM86 modeAndy Lutomirski
user_mode() is now identical to user_mode_vm(). Subsequent patches will change all callers of user_mode_vm() to user_mode() and then delete user_mode_vm(). Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/0dd03eacb5f0a2b5ba0240de25347a31b493c289.1426728647.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/asm/entry: Use user_mode_ignore_vm86() where appropriateAndy Lutomirski
A few of the user_mode() checks in traps.c are immediately after explicit checks for vm86 mode. Change them to user_mode_ignore_vm86(). Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/0b324d5b75c3402be07f8d3c6245ed7f4995029e.1426728647.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/asm/entry, perf: Explicitly optimize vm86 handling in code_segment_base()Andy Lutomirski
There's no point in checking the VM bit on 64-bit, and, since we're explicitly checking it, we can use user_mode_ignore_vm86() after the check. While we're at it, rearrange the #ifdef slightly to make the code flow a bit clearer. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/dc1457a734feccd03a19bb3538a7648582f57cdd.1426728647.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/asm/entry: Add user_mode_ignore_vm86()Andy Lutomirski
user_mode() is dangerous and user_mode_vm() has a confusing name. Add user_mode_ignore_vm86() (equivalent to current user_mode()). We'll change the small number of legitimate users of user_mode() to user_mode_ignore_vm86(). Inspired by grsec, although this works rather differently. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/202c56ca63823c338af8e2e54948dbe222da6343.1426728647.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23Merge tag 'v4.0-rc5' into x86/asm, to resolve conflictsIngo Molnar
Conflicts: arch/x86/kernel/entry_64.S Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/asm/entry, perf: Fix incorrect TIF_IA32 check in code_segment_base()Andy Lutomirski
We want to check whether user code is in 32-bit mode, not whether the task is nominally 32-bit. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/33e5107085ce347a8303560302b15c2cadd62c4c.1426728647.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/mm/fault: Use TASK_SIZE_MAX in is_prefetch()Andy Lutomirski
This is slightly shorter and slightly faster. It's also more correct: the split between user and kernel addresses is TASK_SIZE_MAX, regardless of ti->flags. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/09156b63bad90a327827003c9e53faa82ef4c56e.1426728647.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23x86/asm/entry: Fix execve() and sigreturn() syscalls to always return via IRETBrian Gerst
Both the execve() and sigreturn() family of syscalls have the ability to change registers in ways that may not be compatabile with the syscall path they were called from. In particular, SYSRET and SYSEXIT can't handle non-default %cs and %ss, and some bits in eflags. These syscalls have stubs that are hardcoded to jump to the IRET path, and not return to the original syscall path. The following commit: 76f5df43cab5e76 ("Always allocate a complete "struct pt_regs" on the kernel stack") recently changed this for some 32-bit compat syscalls, but introduced a bug where execve from a 32-bit program to a 64-bit program would fail because it still returned via SYSRETL. This caused Wine to fail when built for both 32-bit and 64-bit. This patch sets TIF_NOTIFY_RESUME for execve() and sigreturn() so that the IRET path is always taken on exit to userspace. Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1426978461-32089-1-git-send-email-brgerst@gmail.com [ Improved the changelog and comments. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-22Linux 4.0-rc5Linus Torvalds
2015-03-22Merge tag 'md/4.0-rc4-fix' of git://neil.brown.name/mdLinus Torvalds
Pull bugfix for md from Neil Brown: "One fix for md in 4.0-rc4 Regression in recent patch causes crash on error path" * tag 'md/4.0-rc4-fix' of git://neil.brown.name/md: md: fix problems with freeing private data after ->run failure.
2015-03-22Merge tag 'driver-core-4.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two bugfixes for things reported. One regression in kernfs, and another issue fixed in the LZ4 code that was fixed in the "upstream" codebase that solves a reported kernel crash Both have been in linux-next for a while" * tag 'driver-core-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: LZ4 : fix the data abort issue kernfs: handle poll correctly on 'direct_read' files.
2015-03-22Merge tag 'char-misc-4.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are three fixes for 4.0-rc5 that revert 3 PCMCIA patches that were merged in 4.0-rc1 that cause regressions. So let's revert them for now and they will be reworked and resent sometime in the future. All have been tested in linux-next for a while" * tag 'char-misc-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "pcmcia: add a new resource manager for non ISA systems" Revert "pcmcia: fix incorrect bracketing on a test" Revert "pcmcia: add missing include for new pci resource handler"
2015-03-22Merge tag 'staging-4.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are four small staging driver fixes, all for the vt6656 and vt6655 drivers, that resolve some reported issues with them. All of these patches have been in linux next for a while" * tag 'staging-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: vt6655: Fix late setting of byRFType. vt6655: RFbSetPower fix missing rate RATE_12M staging: vt6656: vnt_rf_setpower: fix missing rate RATE_12M staging: vt6655: vnt_tx_packet fix dma_idx selection.
2015-03-22Merge tag 'tty-4.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fix from Greg KH: "Here's a single 8250 serial driver that fixes a reported deadlock with the serial console and the tty driver. It's been in linux-next for a while now" * tag 'tty-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_dw: Fix deadlock in LCR workaround
2015-03-22Merge tag 'usb-4.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY driver fixes from Greg KH: "Here's a number of USB and PHY driver fixes for 4.0-rc5. The largest thing here is a revert of a gadget function driver patch that removes 500 lines of code. Other than that, it's a number of reported bugs fixes and new quirk/id entries. All have been in linux-next for a while" * tag 'usb-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: common: otg-fsm: only signal connect after switching to peripheral uas: Add US_FL_NO_ATA_1X for Initio Corporation controllers / devices USB: ehci-atmel: rework clk handling MAINTAINERS: add entry for USB OTG FSM usb: chipidea: otg: add a_alt_hnp_support response for B device phy: omap-usb2: Fix missing clk_prepare call when using old dt name phy: ti/omap: Fix modalias phy: core: Fixup return value of phy_exit when !pm_runtime_enabled phy: miphy28lp: Convert to devm_kcalloc and fix wrong sizof phy: miphy365x: Convert to devm_kcalloc and fix wrong sizeof phy: twl4030-usb: Remove redundant assignment for twl->linkstat phy: exynos5-usbdrd: Fix off-by-one valid value checking for args->args[0] phy: Find the right match in devm_phy_destroy() phy: rockchip-usb: Fixup rockchip_usb_phy_power_on failure path phy: ti-pipe3: Simplify ti_pipe3_dpll_wait_lock implementation phy: samsung-usb2: Remove NULL terminating entry from phys array phy: hix5hd2-sata: Check return value of platform_get_resource phy: exynos-dp-video: Kill exynos_dp_video_phy_pwr_isol function Revert "usb: gadget: zero: Add support for interrupt EP" Revert "xhci: Clear the host side toggle manually when endpoint is 'soft reset'" ...
2015-03-21Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave dmaengine fixes from Vinod Koul: "Four fixes for dw, pl08x, imx-sdma and at_hdmac driver. Nothing unusual here, simple fixes to these drivers" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: pl08x: Define capabilities for generic capabilities reporting dmaengine: dw: append MODULE_ALIAS for platform driver dmaengine: imx-sdma: switch to dynamic context mode after script loaded dmaengine: at_hdmac: Fix calculation of the residual bytes
2015-03-21Merge tag 'pm+acpi-4.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes for recent regressions (PCI/ACPI resources and at91 RTC locking), a stable-candidate powercap RAPL driver fix and two ARM cpuidle fixes (one stable-candidate too). Specifics: - Revert a recent PCI commit related to IRQ resources management that introduced a regression for drivers attempting to bind to devices whose previous drivers did not balance pci_enable_device() and pci_disable_device() as expected (Rafael J Wysocki). - Fix a deadlock in at91_rtc_interrupt() introduced by a typo in a recent commit related to wakeup interrupt handling (Dan Carpenter). - Allow the power capping RAPL (Running-Average Power Limit) driver to use different energy units for domains within one CPU package which is necessary to handle Intel Haswell EP processors correctly (Jacob Pan). - Improve the cpuidle mvebu driver's handling of Armada XP SoCs by updating the target residency and exit latency numbers for those chips (Sebastien Rannou). - Prevent the cpuidle mvebu driver from calling cpu_pm_enter() twice in a row before cpu_pm_exit() is called on the same CPU which breaks the core's assumptions regarding the usage of those functions (Gregory Clement)" * tag 'pm+acpi-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "x86/PCI: Refine the way to release PCI IRQ resources" rtc: at91rm9200: double locking bug in at91_rtc_interrupt() powercap / RAPL: handle domains with different energy units cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs cpuidle: mvebu: Fix the CPU PM notifier usage
2015-03-21Merge git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "A bunch of fixes across drivers: radeon: disable two ended allocation for now, it breaks some stuff amdkfd: misc fixes nouveau: fix irq loop problem, add basic support for GM206 (new hw) i915: fix some WARNs people were seeing exynos: fix some iommu interactions causing boot failures" * git://people.freedesktop.org/~airlied/linux: drm/radeon: drop ttm two ended allocation drm/exynos: fix the initialization order in FIMD drm/exynos: fix typo config name correctly. drm/exynos: Check for NULL dereference of crtc drm/exynos: IS_ERR() vs NULL bug drm/exynos: remove unused files drm/i915: Make sure the primary plane is enabled before reading out the fb state drm/nouveau/bios: fix i2c table parsing for dcb 4.1 drm/nouveau/device/gm100: Basic GM206 bring up (as copy of GM204) drm/nouveau/device: post write to NV_PMC_BOOT_1 when flipping endian switch drm/nouveau/gr/gf100: fix some accidental or'ing of buffer addresses drm/nouveau/fifo/nv04: remove the loop from the interrupt handler drm/radeon: Changing number of compute pipe lines drm/amdkfd: Fix SDMA queue init. in non-HWS mode drm/amdkfd: destroy mqd when destroying kernel queue drm/i915: Ensure plane->state->fb stays in sync with plane->fb